presses used for sale (1,627)

pressure:3500 tstroke:900 mmDistance table / ram, stroke down:1000 mmdistance table / ram, stroke up:1900 mmtable surface area:3150 x 2150 mmram surface:3150 x 2150 mmTotal Weight of Tool max.:30,0 tWeight of Tool Top Part max.:20,0 tspeed down:400 mm/sworking speed:0,9 - 9,2 mm/sHydraulic Operating Pressure:280 baroil volume:5500 lrated current:760 Avoltage:400 Vfrequency:50 Hzpower requirement:425 kWweight:231,0 t

Pressure:080 tthroat:280 mmstroke:20 - 120 mmno. of strokes:42 - 125 /mindistance table/ram, max. stroke up, adjustment up:510 mmtable surface area:700 x 560 mmhole in the table:280 mmtable height over floor:800 mmpassage to the back:320 mmram surface:560 x 350 mmram adjustment:72 mmWeight:5,2 tDimensions (WxDxH):1,6 x 1,6 x 2,6 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical

Pressure:63 tdistance between columns:1000 mmstroke:300 mmDistance table/ram, max. stroke up, adjustment up:850 mmtable surface area:980 x 500 mmtable height above floor:850 mmram surface:130 mmspeed down:400 mm/sspeed up:461 mm/sworking speed:14 - 97 mm/spower requirement:15,0 kWWeight:5,0 tDimensions (WxDxH):2,0 x 1,6 x 3,9 mdepth stop:mechanical foundation pit:not necessary

Pressure:080 tthroat:300 mmstroke:8 - 140 mmno. of strokes:60 / 90 /mindistance table/ram, max. stroke up, adjustment up:420 mmtable surface area:800 x 600 mmhole in the table:330 x 230 mmtable adjustable:230 mmtable height over floor:750 - 980 mmram surface:600 x 240 mmram adjustment:100 mmpower capacity:4,5 / 6,9 kWWeight:5,5 tDimensions (WxDxH):1,4 x 2,5 x 2,6 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic overload protection in ram:hydraulic

: neu : ca. 12 Wochen ab Auftrags : Türkei : 6200 €: 119.66 €: 30 to: horizontal verschiebbar : 200 mm: 775 mm: 125x80 mm: 5 mm/s: 10 mm/s: 1500 mm: 700 mm: 1800 mm: 400 kghorizontal adjustable cylinder with clamping leversteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure:160 tdistance between columns:1250 mmstroke:500 mmdistance table/ram, max. stroke up, adjustment up:700 mmTable area:1200 x 800 mmtable height over floor:850 mmdie cushion pressure in table:63 ? tdie cushion stroke in table:200 mmdie cushion area:780 x 650 mmside window:300 mmram surface:1000 x 800 mmspeed down:400 mm/sspeed up:400 mm/sworking speed:106 mm/soil volume:1800 lpower capacity:2 x 30,0 kWweight:16,7 tDimensions (WxDxH):2,45 x 2,35 x 4,5 m

: neu : ca. 12 Wochen ab Auftrags : Türkei : 6500 €: 125.45 €: 60 to: fix : 250 mm: 1040 mm: 180x120 mm: 4 mm/s: 10 mm/s: 1710 mm: 700 mm: 2100 mm: 800 kgsteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISH user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure:150 tstroke:fix 80 mmno. of strokes:30 - 150 /mindistance between columns:930 mmdistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:880x1300/1500x600 mmhole in the table:760 x 180 mmtable height over floor:1270 mmcolumn travel -side:650 mmram surface:920x1000/1300x600 mmweight:27,5 tDimensions (WxDxH):3,1 x 1,8 x 4,3 mWITHOUT feeder:can be offered optionally

: neu : ca. 10 Wochen ab Auftrags : Türkei : 21500 €: 412.8 €: 150 to: fix : 300 mm: 610 mm: 1520 mm: 9 mm/s: 5 mm/s: 10 mm/s: 600x1520 mm: 100 mm: 190 mm: 2630 mm: 1000 mm: 2470 mm: 3200 kg2 guidingsupper plate with T-slotstable plate with T-Slotsmanometerrapid down move with automtic changeto working speedpiston stops in every position2 hand controltable height adjustableaccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:100 tdistance between columns:770 mmstroke:400 mmdistance table/ram, stroke up:800 mmTable area:770 x 900 mmtable height above floor:850 mmdie cushion pressure in table:40 tdie cushion stroke in table:200 mmdie cushion area in table:600 x 600 mmside window:600 mmram surface:770 x 900 mmspeed down:62 mm/sspeed up:350 mm/sworking speed:17,5 mm/soil volume:700 lpower requirement:42,0 kWweight:9,0 tDimensions (WxDxH):2,6x 2,0 x 3,8 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic

pressure:315 tdistance between columns:1800 mmstroke:400 mmDistance table/ram, max. stroke up, adjustment up:650 mmtable surface area:1800 x 1000 mmtable height over floor:900 mmdie cushion pressure in table:80 tdie cushion stroke in table:100 mmDie cushion area in table:1300 x 600 mmside window:600 mmram surface:1800 x 1000 mmspeed down:400 mm/sspeed up:300 mm/sworking speed:15 - 80 mm/soil volume:1700 lpower requirement:55,0 kWweight:27,5 tdimensions (WxDxH):3,1 x 2,2 x 4,6 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 die cushion in table:hydraulic foundation pit:not necessary

pressure:320 tdistance between columns:1530/1370 mmstroke:320 mmdistance table/ram, stroke up:830 mmtable surface area:1500 x 650 mmdie cushion pressure in table:12,5 ttable height over floor:1100 mmside window:570 mmram surface:1240 x 650 mmcapacity of ejector in table:12,5 tspeed down:450 mm/sspeed up:440 mm/sworking speed:63,6 mm/soil volume:2100 lpower requirement:2 x 45,0 kWweight:27,0 tdimensions (WxDxH):4,0 x 2,3 x 4,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic drawing cushion in ram:hydraulic ram interlocking:hydraulic Option: NEW electrical controls:Siemens S7-1500 F

: gebraucht : 2023 : 7280 : prompt, Zwischenverkauf v : Türkei : 15700 €: 1 : 100 to: fix : 1020 mm: 300 mm: 1020 mm: 680 mm: 9 mm/s: 5 mm/s: 10 mm/s: 6 mm: 500x1020 mm: 100 mm: 190 mm: 2110 mm: 1000 mm: 2275 mm: 2082 kgdemo machine / mint conditionnet price (price for new machine € 19.550,00)2 guidingsbig upper tool holder and table with t-slotsupper and lower pressbrake toolmanometerrapid down move with automtic change to working speedpiston stops in every position2 hand panel AND FOOT PEDALTisch höhenverstellbaraccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:160 tdistance between columns:1580/1360 mmstroke:320 mmdistance table/ram, max. stroke up, adjustment up:830 mmtable surface area:1460 x 850 mmtable height over floor:1100 mmside window:870 mmram surface:1400 x 850 mmspeed down:540 mm/sspeed up:520 mm/sworking speed:26 - 85 mm/soil volume:2100 lpower requirement:45,0 kWweight:22,6 tdimensions (WxDxH):4,0 x 2,3 x 4,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 ram interlocking:hydraulisch

pressure:160 tdistance between columns:1600/1420 mmstroke:345 mmdistance table/ram, max. stroke up, adjustment up:830 mmtable surface area:1460 x 850 mmtable height over floor:1100 mmside window:770 mmram surface:1410 x 850 mmspeed down:540 mm/sspeed up:520 mm/sworking speed:26 - 85 mm/soil volume:2100 lpower requirement:45,0 kWweight:23,0 tdimensions (WxDxH):4,0 x 2,3 x 4,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 ram interlocking:hydraulisch

pressure:025 tthroat:200 mmstroke:8 - 80 mmno. of strokes:60 - 180 /mindistance table/ram, max. stroke up, adjustment up:330 mmtable surface area:560 x 400 mmhole in the table:150 mmtable height over floor:800 mmpassage to the back:240 mmram surface:355 x 220 mmram adjustment:50 mmweight:3,0 tdimensions (WxDxH):1,0 x 1,4 x 2,2 minfinitely variable drive:Stöber overload protection in ram:mechanical NEW electrical controls:Pilz

: neu : 2024 : 7296 : prompt, Zwischenverkauf v : Türkei : 70300 €: 1328.67 €: 1 : 100 to: 4.5 mm: 700 mm: 1000 mm: 210 mm: 1 - 132 mm: 58 1/min: 6 : 90 mm: 60 mm: 300 mm: 445 mm: 7.5 kW: 1650 mm: 1545 mm: 3011 mm: 7000 kgWelded steel construction body frameCrankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precisionSnBz-12 quality bronze to bearings, grinded for min surface resistanceRam supported from 6 sidesPneumatic counter-balancing of the ram7", touchscreenGears in oil bathPneumatic clutch-brake combinationPLC control for safetyPhotocell light barriersMotorized slide adjustableMechanical overload fuseTwo hand and foot pedal controlAdjustable stroke (inverter)automatic centrallubricationMachine and equipment in conformity with CE-regulationsOPTIONS: vibration pads € 192,00 bolster plate € 2.580,00The data for this ad was created with ModulMWS - the ...

pressure:300 tdistance between columns:1800 mmstroke:1000 mmDistance table/ram, max. stroke up, adjustment up:1300 mmTable surface area:1600 x 1200 mmTable height above floor:1080 mmRam surface:1600 x 1200 mmWeight:24,0 tDimensions (WxDxH):2,8 x 2,1 x 6,0 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 83200 €: 1572.48 €: 130 to: 4.5 mm: 650 mm: 950 mm: 220 mm: 1 - 132 mm: 50 1/min: 6 : 95 mm: 70 mm: 325 mm: 500 mm: 11 kW: 1800 mm: 1725 mm: 3020 mm: 8000 kgWelded steel frame construction6-fold ram guidePneumatic clutch-brake combinationProtective enclosure with light barriers and side doorsMechanical overload protectionTwo-hand and foot pedal operationManual stroke adjustmentMotorized ram adjustmentVariable stroke rate via frequency converterOperating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operationTouchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs2 free cams for connecting peripheralsAutomatic central lubrica ...

pressure:100 tthroat:360 mmstroke:500 mmdistance table/ram, max. stroke up, adjustment up:800 mmtable surface area:900 x 560 mmtable height over floor:710 mmram surface:630 x 400 mmspeed down:200 mm/sspeed up:200 mm/spower requirement:17,0 kWweight:5,0 tDimensions (WxDxH):1,2 x 1,9 x 3,3 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

pressure:400 tdistance between columns:1100 mmstroke:250 mmno. of strokes:25 - 75 /mindistance table/ram, max. stroke up, adjustment up:900 mmtable surface area:1100 x 965 mmcapacity of ejector in table:30 tejector stroke of ejector in table:80 mmcapacity of ejector in ram:3 tstroke of ejector in ram:60 / 70 mmram surface:980 x 800 mmcolumn travel -side:800 mmram adjustment:20 mmpower capacity:80,0 + 5,5 kWweight:47,0 tDimensions (WxDxH):3,5 x 3,3 x 6,0 mweight of switch cabinet:1,4 tdimensions of electrical cabinet (WxDxH):4,9 x 0,5 x 2,6 mejector in ram:hydraulic

Pressure:040 tthroat:180 mmstroke:0 - 76 mmno. of strokes:145 /mindistance table/ram, max. stroke up, adjustment up:350 mmtable surface area:600 x 360 mmhole in the table:110 mmtable height over floor:800 mmram surface:270 x 175 mmram adjustment:65 mmpower capacity:2,2 kWweight:1,75 tDimensions (WxDxH):1,1 x 1,2 x 2,1 mGerman Safety: permitted for manual loading:CE-sign clutch:pneumatic

pressure:100 tdistance between columns:1250 mmstroke:1035 mmtable surface area:890 x 1280 mmdistance table/ram, max. stroke up, adjustment up:1035 mmtable height over floor:630 mmram surface:1000 x 1200 mmside window:700 mmmax. tool weight:7 tmax. capacity of swivelling ram plate:3,5 toil volume:180 lpower capacity:9,0 kWweight:11,0 tDimensions (WxDxH):2,1 x 3,8 x 3,9 mram interlocking:hydraulic

pressure:620 tdistance between columns:2250 mmstroke:1250 mmDistance table/ram, max. stroke up, adjustment up:1600 mmtable surface area:2200 x 1280 mmram surface:2200 x 1500 mmtable height over floor:800 / 1000 mmcolumn travel -side:750 mmfeed down:10 - 250 mm/secfeed up:10 - 500 mm/secworking feed:1 - 24 mm/secoil volume:2000 lpower capacity:45,0 + kWweight:42,0 tDimensions (WxDxH):3,7 x 2,6 x 6,8 mGerman Safety: permitted for manual loading:CE-sign foundation pit:not necessary

pressure:080 tthroat:280 mmstroke:8 - 112 mmno. of strokes:30 - 120 /mindistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:840 x 580 mmhole in the table:150 mmtable height over floor:910 mmpassage to the back:640 mmram surface:560 x 300 mmram adjustment:80 mmpower requirement:7,5 kWweight:8,0 tdimensions (WxDxH):1,6 x 2,3 x 3,3 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:hydraulisch ram adjustment:motoric

pressure:025 tthroat:200 mmstroke:8 - 80 mmno. of strokes:180 /mindistance table/ram, max. stroke up, adjustment up:330 mmtable surface area:550 x 400 mmhole in the table:60 mmtable height over floor:800 mmpassage to the back:200 mmram surface:355 x 220 mmram adjustment:50 mmpower requirement:2,7 kWweight:2,5 tdimensions (WxDxH):1,2 x 1,8 x 2,4 moverload protection in ram:mechanical

Pressure:035 tthroat:225 mmstroke:8 - 100 mmno. of strokes:130 /mindistance table/ram, max. stroke up, adjustment up:370 mmtable surface area:580 x 450 mmhole in the table:210 x 170 mmtable height over floor:700 mmram surface:350 x 180 mmram adjustment:70 mmpower requirement:2,2 kWweight:2,2 tdimensions (WxDxH):1,0 x 1,8 x 2,2 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:hydraulic overload protection in ram:mechanical

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 102300 €: 1933.47 €: 80 to: 2550 mm: 4 : 320 mm: 2840 mm: 500 mm: servomotorischer Riemenan : 105 mm/s: 10 mm/s: 105 mm/s: 650 mm: 250 mm: 3700 mm: 2200 mm: 2550 mm: 6400 kgElectromotor drive with multiple switched flat belt system4 axes (Y1, Y2,X, R)CNC control DELEM DA-66S- 2D touchscreen display 17- 3D visualisation in simulation and production- intuitive touch-screen control (simple drawing of the bending outline with your finger)- simple and convenient data transfer- multi-simulation option- user friendly programming in dialogue form- graphic simulation of the bending sequenceservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesupper tool 1010 / A / 75 °, devidedand cranked4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)safety device BLVT light guardlinear guided sheet support a ...

pressure:120 tdistance between columns:430 mmstroke:125 mmdistance table/ram, stroke up:400 mmtable surface area:430 x 450 mmtable height over floor:860 mmside window:230 mmram surface:250 mmworking speed:10 mm/spower requirement:11,0 kWweight:2,5 tdimensions (WxDxH):1,6 x 1,3 x 2,4 mGerman Safety: permitted for manual loading:CE-sign

Pressure:250 tstroke:30 mmno. of strokes:60 - 500 /minDistance between columns:1500 mmdistance table/ram, max. stroke up, adjustment up:390 mmtable surface area:1580 x 1100 mmhole in the table:1270 x 300 mmtable height over floor:1470 mmside window:600 mmram surface:1500 x 900 mmram adjustment:100 mmmaterial width:500 mmmaterial thickness:0,5 - 1,5 mmcoil weight:6,5 tcoil internal diameter:420 - 560 mmcoil external diameter:1500 mmpower capacity:45,0 kWWeight:44,0 tDimensions (WxDxH):3,3 x 1,8 x 4,5 mclutch:pneumatisch ram adjustment:motorisch double decoiler:LH 2-1,5-500 straightening machine:R 500 roll feed:mechanisch; Schuler, WK 8-500