Manufacturer: C&F Model No.: 450 Nominal capacity: 450 liters Maximum capacity: 540 liters Mount: Wacker WL34 hook mount Hydraulically driven Hydraulically controlled drain opening Rexroth-Bosch distribution block for control Hydraulic motor with reduction gear Shovel base, cutting edge and side cutting edges made of Hardox 400 (8 mm) Mixer screw rings made of Hardox 500 (12 mm) Mixer shaft made of C45 solid steel Ø 70 mm Permanently lubricated flange bearings Hot-dip galvanized protective grille with cement bag spikes Drain hose with guide rod and quick release Hydraulic lines with protective cover and flat-sealing CLT couplings Electrical kit (switch and junction box) available CE certificate available Operation and maintenance instructions available Curb weight: 470 kg Weight loaded: 1,570 kg Dimensions (L × W × H): 162 × 147 × 78 cm Auction-ID: A1-47155-8004

Auction-ID: A1-46933-115

Auction-ID: A3-43538-21455

Mobile Wheel Screening Plant Powerscreen Chieftain 8 x 4 = Manufacturer Powerscreen mobile screening system on wheels, mobile, semi-trailer Screen dimensions 2,438 x 1,219 mm Screen Box: Double Decker Eccentric Screen Box Throughput: approx. 80 - 100 t/h

Lokotrack LT140 Year of manufacture 1996 Crusher inlet 1400 x 1070 mm Converted to electric drive 200kW Machine in operational condition from a limestone quarry/cement plant 115 tons 4 Transports

Aerated concrete plant complete for 60,000 m³ per year

Complete plant (production) for paving stones: Gravel feed Mixer Main Engine 844AZ Stacking system Strapping system

track-mounted jaw crusher MC140 Inlet width 1400 mm Weight 160 t Capacity up to 600 t/h Good condition

Impact crusher 8/4/3 S3 Infeed width 480 mm Inlet height 400 mm Maximum feed up to 250 mm hard rock Capacity up to 60 t/h depending on gap setting Drive power 45 - 90 kW The machine has completely new wear parts The rotor is overhauled with new blow bars Includes hydraulic power unit for swingarms and housing Basic machine with infeed hopper

Slicer IFE 2 x 5 m 1 Deck Version Screen lining, wire cross-tensioned Very good condition, few operating hours from a pilot plant

Split sieve coverings for an IFE dewatering screening machine 1 pcs L 500 mm x W 800 mm gap 0.3mm 1 pcs L 1000 mm x W 800mm gap 0.3 mm 2 pcs L1000mm x W 800 mm gap 0.3 mm 3 pcs L1000mm x W 800 mm gap 0.3 mm 5 pcs L1000mm x W 800 mm gap 0.3 mm The pads are unused or only in use for a short time

Screening machine large, Terra St used, overhauled

2 cyclones as good as new Type AKA VORTEX Twin TRT 4118 Throughput per twin 95m3/h total 190m3/h Diameter 200mm, cutting cut approx. 50my 1 pcs new cyclone Type AKA Vortex KRS3128 II 40m3/h DM 150 mm All cyclones including overflow line and shut-off valve If required, a refurbished PUMP METSO VASA is also available Drive 30 kW available are also handed in individually

Pre-breaker with crusher Suitable for soft lime, marl, coal Power up to 200- 600 t/h Task size up to 1500mm Drive - electric transformer station 30kV/400V Drive power approx. 500 kVA Plant weight approx. 130 tons Task bunker 25m3 Chain conveyor Roller rust Schlagwalzenbecher Deduction tape Dust removal system Caterpillar suspension - not self-driving Conveyor belt 3 x 40m Telestack, self-driving, belt width 1200mm Immediately available

Four nearly new moulds for garden wall and fence.

BRICK FACTORY, RED BRICK, CLAY BRICK PLANTS - second hand, used, We offer also DE montage and Montage. Also control renewing. Porenbetonwerk, Kalk Sandstein Werk, Dachziegelwerk, Ton Ziegelwerk, Aerated concrete plant, Lime sandstone factory, calcium silicate blocks, Roofing tile works, Clay brick plant, ERICH PETER MACHINES-PLANTS GMBH A-7083 Purbach Hofgartengasse 7 Phone: +43 664 3358378 Mail: office@machines-plants.at Web: www.machines-plants.at

with technical advice, Affordable housing Low-cost housing, cmodul austria low cost housing • Pallet circulation systems for filigree and double wall elements NEW & USED • Machines and systems for prefabricated parts - battery formwork, tilting tables and special moulds • Stationary concrete block paving stone and edge stone installations + shapes as NEW • Mobile concrete stone machines + moulds as NEW • Concrete pipe and shaft ring machines and parts thereof • KS - Lime sandstone works • Dry mortar plants and parts thereof • Brickworks and parts thereof our used lines meets after reinstallation by us the Definition RETROFIT

-Sale by owner AT THE CAMP ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobile: +43-664-3358378 office@machines-plants.at www.machines-plants.at for fully automatic packaging of block and bricks in Special design for stacking and setting up concrete elements Drive: Electro-hydraulic, wheels of the clamfore truck made of Vulkollan Stacking device: All-wheel steering with + 90 0 steering impact from straight line. Control: PLC from Siemens The respective stowage inserts are detected by light barriers Hydraulic: Gear constant pump, ultra-fine filter in high-pressure circuit, return filtering Front and rear wheels can be steered separately or separately. Maximum stacking height of the forklift 1,250 mm Special gripper clamp, in which a complete stoare is held and can be handled, a set of ...

TECHNICAL SPECIFICATIONS Description: Conveyor belt system Version: stationary Wheelbase: 140 m Strip width: 650 mm Year of manufacture: unknown Drive power: 18.5 kW Drive type: Slip-on gear motor (SEW) A-Prop Support Catwalk: single-sided Belt quality: Good Belt tension: Weight tensioning station Belt turning station: yes Top Strap Cover: Yes Galvanized version: yes Segment length: approx. 25 m SPECIFIC COMMENT - Good condition - Incl. control box - Incl. feed hopper, approx. 9 cbm

TECHNICAL SPECIFICATIONS Dimensions (LxWxH): 10,000 x 1,200 x 1,200 mm Pavement: one-sided Hot-dip galvanizing: yes Weight: approx. 1,500 kg / segment Available quantity: 35 pcs. SPECIFIC COMMENT - Steel bridge elements for belt guidance - Robust construction - Designed for a strip width of 1,000 mm - CAD drawing available - Can also be purchased separately

TECHNICAL SPECIFICATIONS Manufacturer: GHH Designation: Double toggle jaw crusher Design: Heavy duty version Type: 86 Year of construction: 1968 Throughput: 45 - 55 cbm/h at crushing gap 80 - 100 mm Inlet opening: 800 x 630 mm Maximum feed size: approx. 450 mm Drive power: 112 kW Weight: 27.000 kg SPECIFIC COMMENT Complete semi-mobile system consisting of: - GHH double toggle jaw crusher - Feed funnel - Plate tape 1,000 x 5,000 mm - Plaster tape (under the plate tape) 800 x 8,000 mm - Solid steel construction ---------------------------------------------------------- TECHNICAL SPECIFICATIONS Manufacturer: GHH Description: Double toggle jaw crusher Version: Heavy duty version Type: 86 Year of construction: 1968 Throughput capacity: 45 - 55 cbm/h with crushing gap 80 - 100 mm Feed opening: 800 x 630 mm Maximum feed size: approx. approx. 450 mm Drive power ...

TECHNICAL SPECIFICATIONS Manufacturer: MOGENSEN Designation: Stangensizer / Stangenrost Type: DX3527 Year of construction: 1994 Version: Two-deck Clear length: 3,500 mm Clear width: 2,300 mm Total height: 2,750 mm Rod diameter above: 70 mm Rod diameter bottom: 40 mm Top gap distance: 216 mm Gap distance below: 330 mm SPECIFIC COMMENT - Reappraisal 2020, since then unused - Robust construction - Ideal for coarse separation

ID2123 Liebherr Betomat III-570 year 1985-2001 complete concrete mixing plant with 3 mixers (2 x ZE1500 / 2250, 1 x ZE 500/750), Sauer dosing system (year of construction approx. 2005) Complete concrete mixing plant with 3 mixers (2 x ZE1500/2250, 1 x ZE 500/750), Sauer dosing plant (year of construction approx. 2005)

Used multilayer paver Zenit 844 Built in 1993 Included: 1 piece concrete mixer 750 l Teka 1 piece concrete mixer 500 l approx. 12 pieces of used molds approx. 100 pieces of production pallets Used concrete multilayer machine Manufacturer: Zenith Type: 844 Year: 1993 including: - 1 pcs 750 liter blender Teka - 1 pcs 500 liter blender - about 12 moulds - about 100 pcs production boards

ID3792 RubbleMaster RM80GO! year/Baujahr 2011 8600 hours/hours Mobile impact crusher, with pre-screening, magnet, oversize return, and remote control. Mobile impact mill, with pre-screening, magnet, oversize recirculation, remote control

Net weight: 14,300 kg, Dimensions: Length: 6.9 m, Width: 2.5 m Height: 2.55 m, Container size: 6.5 m, Crusher number: 103334

Net weight: 7900 kg, connected load: 15 kW, Container dimensions: Length: 6.5 m, Width: 2.3 m, Height: 2.64 m

Used Stone Making Line Year of Make: 2006 Consisting of: - Attachment mixer: Kniele 0.5m³ - Core concrete mixer: Kniele 2m³ - 6-fold inking system (granules), make Finke - Hess Stone Paver Multimat RH 1500-2A including R&W Height Measuring Station SHV-500 - Hess transfer table - Rotho – drying chamber - Complete dry side with packaging system - 3,000 pieces Assyx underlay boards 1400x1100x50mm Used block-making, block-production, paver production plant Year of manufacture: 2006 Consisting of: - First layer mixer: Kniele 0.5 m³ - Core concrete mixer: Kniele 2 m³ - colouring system with 6 colors (granulate), Finke brand - Hess Multimat RH 1500-2A block-making machine including R&W SHV-500 height measuring station - Hess sliding table (finger car) - Rotho – curing chamber - Complete dry cycle with packaging system - 3,00 ...

Sandblasting machine Cassani STL A-600/2TR 2 turbines Sandblasting machine Cassani STL A-600/2TR 2 turbines

ID3691 Atlas Speedcut 100 year/Baujahr 2013 Wire saw, engine defect Wire saw, motor defect