paper converting: laminating and coating used for sale (83)

560mm Width – Keypad Electricity 220/240 V – 50 Hz Dimensions: 100 x 60 x high 52cm

MANUFACTURER GMP WIDTH (MM) 1550 HIGHT (MM) 1210 WATT 100 AMPERE 0.4 MORE INFORMATION LAMINATING SIZE: 1120MM TYPE EXCELAM-Q1120COLD/RS DEPTH (MM) 610 VOLT 230

Model - ALM3222 Laminating Width - 330mm Speed -0,5 to 1,7 m/min (variabel) Film Thickness - 30 Mikron bis 125 Mikron Heat Type - Heated Rollers: Dual heat only Temperature Range - 80 - 130 ° C Warm-Up Time - 5 minutes Paper width - 257 - 330 mm Paper Length - 182 - 457 mm Paper thickness - 0,07 - 0,25 mm Paper Feed Capacity - 200 Sheets, Adjustable Paper Guide Trimming Methods - Flush cut or Border cut

Asitrade / Bobst 1650 – Inline double-wall laminating line Year: 1995 / 2016–2018 Working width: 1,650 mm; double-wall configuration Flutes: E, B, F, C; operator side: left Asitrade components from 1995; Bobst additions from 2016–2018 Equipment: Asitrade single facer and Bobst Modul Facer MF 260 Roll stands and splicers; Spiess feeder for printed top sheets Asitrade litho laminator; Bobst Triplo J 13 second gluing station Bobst QBK cut-off and Copar system Pressure belt, flip-flop unit and non-stop high-pile delivery Reference: PP-51501 Further information on request.

Asitrade 1450 – Inline litho laminating line Year: 1995 Max. working width: 1,450 mm Operator side: left Equipment: Asitrade single facer 2 roll stands with splicers Inline litho laminator Pressure belt, flip-flop unit and stacker Main components built in 1995. Reference: PP-51569 Further information on request.

Billhöfer EK 102-50 – Laminating machine Year: 1999 Max. format: 1,020 × 1,140 mm Water-based lamination. Reference: PP-57522 Further information on request.

Lamina SA 1620 – Sheet laminating machine Year: 2023 Max. format: 1,600 × 2,000 mm Manual feeding of offset-printed top sheets. Reference: PP-58717 Further information on request.

- Assembly for B and E-waves, - Year of manufacture 2000, - Working width 1,400 mm, but already produced also 1,440 mm, - Accessory units: glue foamer (cold glue), page counter, spray bar bridge (water), tearing thread and reinforcement tape, - Hydraulic power unit new (Oct 24), Scope of delivery:, - Splicer, - Stow cart, - Rails and trolleys, - climbing band, - Conveyor bridge, - Catwalk / Ladder, - Line art dancer, - Water spray / water spray, - vacuum pump, - Vacuum blower, - Vacuum pump for investors, - Module Facer MF 250, - Cassette deck, - switch cabinet, - Command Console, - Preheater / A 600, - Tandem preheaterI, - Train station, - Slitter, - adhesive work, - Rail edge control, - Digging belt 5 m, - Standoff/Angle Shelf, - catwalk platform, - Jetty bridge, - Crosscut shear (reversing knife), - switch cabinet, - Command Console, - Control console berthing, - Single-press line, -  ...

Working width: 650 mm Power consumption: 380 / 50 Hz, working width: 650 mm, Connection value: 380 / 50Hz

Sumbel Herold 800 banding machine; Condition new and unused; Working width 800mm; suitable for cold glue; Speed adjustable. Gluing machine Sumbel Herold 800; conditioin new never used; working width 800; used for cold glue; adjustable in speed.

STOCK Laminating machine, Max. Bogenformat. 1420 x 1620 mm, Min. Bogenformat: 500 x 500 mm, · mit Mabeg SDA6 Anleger, · Saugriemen-Trägerbogen-Anleger, Typ 4R, · Pressband, Typ 5, · Paket-Wender (Gabeln) mit Non-Stop-Einrichtung, Typ 8, · Stapelableger mit Non-Stop-Rollenteppich, Typ 7, Technische Daten:, Arbeitsbreite: 1500 mm, Max. Bogenbreite: 1420 mm, Max. Bogenlänge: 1640 mm, Kaschiertoleranzen: +/- 1,5 mm, Materialstärke:, - Trägermaterial von 0,6 - 7 mm. Einseitige Wellpappe läuft nur mit stehender Welle durch die Maschine., - Für Karton von ca. 400 – 500 g/m² ist ein zusätzlicher Nadelbalken erforderlich., - Deckbogen von ca. 180 – 400 g/m². Abweichungen je nach Materialbeschaffenheit möglich.

Impressions=0 m, Condition= Very Good , Availability= 2026-05-01, Max. sheet size: 1100 x 1050mm Min. sheet size: 350 x 350mm Top sheet: 130 – 450gsm Bottom sheet: 250 gsm to 10mm Automatic top sheet rear edge sheet feeder Automatic substrate rear edge sheet feeder Glue system Stacker unit PLC control system 400.000 sheets produced only !

Min. sheet size: 32 x 21 cm Max. sheet size: 106 x 142 cm Max. laminating size: 105 x 141.5 cm Max. foil thickness: 30 μ Speed max.: 50 m/min Power 122 KW MABEG feeder, special PET foil separator, ...

MHI Singlefacer Model 50C, Size: 2500 mm, Max. Working Press: 200 psi, Year: 1984, C-Flute = overhould, in Production

Stock Laminating machine, Type: 134R5-1500 P, Year 2001, Max.Size: 1420x1620 mm, Min.Size: 500 x 500 mm, Printers sheet:, Paper from about 180 g/m², Carton from about 400 g/m², Carrier sheet:, corrugated cardboard up to about 7.0 mm thickness, Cardboard/Chipboard from 0.6 mm

Sumbel Herald 500; Condition as is; cleaned and tested; Working width 500mm; suitable for cold glue. Sumbel Herald 500; condition as is; cleaned and checked; working width 500mm; used for cold glue.

Reference ID PP-57328 Category Laminator Manufacturer Billhöfer Model EK 102-50 Year Built 2002 Color - Impression - Working Hours - Speed - - Max. size 102 x 114 cm Min. Size - Condition Good Location Europe Availability Immediately Machine Description Both water-based adhesive and thermal. Separator Laminated Delivery Table

Reference ID: PP-56132 Category: Laminator Manufacturer: Steinemann Model: Lotus SF 102 Year: 2005 Max. size: 102 cm × 142 cm Condition: Good Location: Europe Availability: Immediately Description Double-calendar system Can be seen in working condition Includes 1 spare bottom impression roller Measurement rollers in various sizes will be provided

Technical data: Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving th ...

Coated web width 1315 mm Max. web width 1330 mm primary unwinder: 1000 mm secondary unwinder: 1200 mm rewinder: 1200 mm Speed: 400 m/min Accessories: - Solvent-less mixer Nordmeccanica - Continuous filling World Mixer (with 4 tanks of 200 kg) - 5 rolls Material: COATED WEB BOPP12-80μ,PETP10-30μ,LDPE,LLDPE30-200μ,OPA12-18μ,NYLONCAST30-80μ ALU(Foil)6,3-40μ,PPCAST60-150μ,PAPER40-150gr/m2 LAMINATED WEB BOPP12-80μ,PETP8-30μ,LDPE,LLDPE20-200μ,OPA12-18μ,NYLONCAST20-80μ ALU(Foil)6,3-40μ,PPCAST20-150μ,COEXFILM25-200μ PAPER 40 - 150 gr/ m2

Technical data: Web width: 1,300 mm Lamination type: Duplex (two-ply) Adhesive system: 2-component, solventless Mechanical speed: 300 m/min Unwind diameter: 800 mm (shaftless, single-position) Rewind diameter: 800 mm (shaftless, single-position) Core diameter: 3" Web direction control: Integrated web guiding system Corona treatment: 1–2 corona stations Heating: Electric heating with temperature regulation system Coating rollers: Coating head with staggered application rollers for solventless adhesive, configured for accurate laydown control Main Features: - Shaftless single unwind station - Shaftless single rewind station - Duplex configuration for solventless adhesive lamination - Corona treater for surface activation - Electric heating for coating unit - Temperature control system - Web guide for precise alignment - Coating head with multiple rollers for fle ...

Impressions=0 m, Condition= Very Good , Availability= 2025-11-03, Mabeg feeder Laminating section Sheet separator Jogger Max. Sheet size: 760x1020mm Videos in production available

Impressions=0 m, Condition= Very Good , Availability= 2025-11-03, Min size: 28x28 cm max Size: 76x102 cm Max speed 50 m/min Grammar 130 gsm- 380 gsm Pneumatic

Impressions=0 m, Condition= Very Good , Availability= 2025-11-03, Max size : 635 x 902 mm Min size : 393 x 546 mm Stock range : 80- 400 gsm Max speed : 4000 sph Full UV Spot UV Automatic pile feeder Coating unit IR Drying oven UV Drying oven Cooling section Pile delivery