other storage equipment used for sale (3,033)

We offer an LTG-TowerMax L 20.0-250-2070-825-6680 storage system modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 6680 mm Overall width 2400 mm Installation depth 2885 mm Total payload machine up to 2 x 10,000 kg 37 carriers for up to 250 kg payload each in clear usable dimensions: B = 2070 mm T = 825 mm Usable height up to 57 to 750 mm Start of the operating opening in 900 mm above OKFF, then 825 mm high Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.55 kW / 400 Volt Colour scheme grey/grey, galvanised beam Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

We offer a paternoster LTG-TowerMax P 13.5-450-30-410-7935 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 7,935 mm Overall width 3,501 mm Installation depth 1,820 mm 30 carriers with a payload of 450 kg each in clear usable dimensions: H = 410 mm W = 2,850 mm T = 628 mm Chain jump 457 mm 60 galvanized intermediate floors for 150 kg each Total payload up to 13,500 kg Side table in 1000 mm above OKFF with NiRo worktop, 400 mm deep Colour scheme grey Motor power drive 1 x 5.5 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries

We offer an LTG-TowerMax L 70.0-150-2448-1071-5885 storage lift modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 5885 mm Overall width 2840 mm Installation depth 3500 mm Total payload machine up to 2 x 35,000 kg 60 carriers for up to 150 kg payload each in clear usable dimensions: W = 2448 mm T = 1071 mm Usable height up to 50 to 750 mm Start of the operating opening in 840 mm above OKFF, then 990 mm high Engine power Vertical drive 5.2 kW / 400 Volt Horizontal drive 0.75 kW / 400 Volt Rocker motor 0.4 kW / 400 V Colour scheme grey/grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

We offer an LTG-TowerMax L 20.0-250-2460-825-6440 storage system modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 6440 mm Overall width 2850 mm Installation depth 2900 mm Total payload machine up to 2 x 10,000 kg 52 carriers with center bar for up to 400 kg payload each in clear usable dimensions: W = 2460 mm T = 825 mm Usable height up to 55 to 750 mm Start of the operating opening at 900 mm above OKFF, then 800 mm high Engine power Vertical drive 4 kW / 400 Volt Horizontal drive 0.5 kW / 400 Volt Colour scheme grey/blue, galvanised carrier Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

We offer LTG-TowerMax L 70.0-304-2448-816-7510 storage systems modernized by us with a completely new StoreControl L control system. currently 2 identical machines are available Exterior Dimensions: Height 7510 mm Overall width 2700 mm Overall depth 2820 mm Total payload machine up to 2 x 35,000 kg 55 carriers for up to 304 kg payload each in clear usable dimensions: W = 2448 mm T = 816 mm Usable height up to 60 to 750 mm Start of the operating opening at 950 mm above OKFF, then 915 mm high Engine power Vertical drive 5.2 kW / 400 Volt Horizontal drive 0.75 kW / 400 Volt Rocker motor 0.4 kW / 400 V Colour scheme grey/blue, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

modernized machine with new LTG-StoreControl P control system Control expansion optionally possible Exterior Dimensions: Overall height 8,700 mm Overall width 3,500 mm Installation depth 1,580 mm 51 carriers with a payload of 350 kg each in clear usable dimensions: H = 255 mm W = 3,050 mm T = 520 mm Chain jump 305 mm 51 galvanized intermediate floors Total payload up to 19,000 kg Side table in 990 mm above OKFF with NiRo worktop, 315 mm deep Colour scheme grey Motor power drive 1 x 3.8 kW / 400 Volt subject to errors, technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in D, A and other neighboring countries

Modernised machine with new LTG control system StoreControl L currently 6 identical machines available Exterior Dimensions: Height 4889 mm Overall width 2785 mm Overall depth 2810 mm Total payload machine up to 2 x 15,000 kg 63 carriers with center bar for up to 400 kg payload each in clear usable dimensions: W = 2460 mm T = 825 mm Usable height up to 55 to 750 mm Start of the operating opening in 875 mm above OKFF, then 875 mm high Engine power Vertical drive 6 kW / 400 Volt Horizontal drive 0.55 kW / 400 Volt Colour scheme grey/blue Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

Racking hall consisting of cantilever racks and pallet racks, OHRA, floor area approx. 867m2 – used - : Price from location: 99.500.-€ (net), for self-dismantling! Price for disassembly on request. For an extra charge, the material for closing a gable side is also available! Manufacturer: OHRA Year of construction: 2019, the sheets 2021 Dimensions of the hall: Width approx. 17.35m Length: approx. 50m Height: Shelf approx. 6,385mm Height ridge approx. 7.10m After dismantling, one long side of the hall is open (where it now stands at the existing hall) Cantilever rack: 2 rows of 25 double-sided frames = a total of 50 pieces of cantilever rack frames double-sided Arm length: 1.20m Arm Load: 1,400kg Load center of gravity: 600mm Stand load per side: 4,200kg Wheelbase: 2m Arms are plugged in Arms with load deflector, device for roll-off protection Incl. palle ...

2x Workbench – used - : Special price for pick-up by Friday, 30.1.2026! Prices from location: 200.-€ (net) / piece Manufacturer: Type: Year of manufacture: unknown Dimensions: Width table top: approx. 1.50m, depth approx. 72cm, height: approx. 80cm Rating: good Available: immediately Location: Euskirchen

Lift lifter, Expresso, Lift&Drive 85 – used - : Special price for pick-up by Friday, 30.1.2026! Prices from location: 950.-€ (net) Manufacturer: Expresso Type: Lift&Drive 85 Year of manufacture: unknown Load capacity: 70kg Charging voltage: 230V, 50Hz Battery voltage: 18V/AH Rating: good Available: immediately Location: Waltrop

approx. 111 pieces Corlettes, Cordes and Koch, width 1.30 / 2m / 2.40m - used - : Prices per piece from location (net): Type 1 + 2 (2m wide): only 99.-€ Type 3 (1.30m wide): only 69.-€ Type 4 (1.30m wide): only 99.-€ For complete purchase (priority): 8.950.-€ (net) Manufacturer: Cordes und Koch Type: Corlette / Multi-Box Year of manufacture: unknown Foldable Not stackable Depth: 1.15m Type 1 – approx. 70 pieces Width: approx.: 2m, Height approx.: 1.80m Type 2 – approx. 32 pieces Width: approx.: 2m, Height approx.: 1.92m Type 3 – approx. 6 pieces Width: approx.: 1.30m, Height approx.: 1.80m Type 4 – approx. 3 pieces Width: approx.: 2.40m, Height approx.: 1.80m Condition: good, see photos Available: immediately Location: Nuremberg

A rail-mounted gantry crane Kranbau und Fördertechnik is available. Load capacity: 10000kg, outreach range: 1m-6m, turning device inclination angle: 20°, Max. torque, rotational speed: 2.6m/min, dead weight: 2600kg. Documentation available. An on-site inspection is possible.

Load capacity: 1800kg, drive wheels: single, rated power: 42kW, lift height: 3290mm, load center: 500mm, mast model: 5V15C33, operating hours: approx. 1116h. Documentation available. An on-site inspection is possible.

used small load carriers C-KLT 6414, polypropylene, W 600 x D 400 mm, up to 50 kg, light blue External dimensions W x D x H [mm] 600 x 400 x 148 Floor version: closed Design walls: closed Temperature deflection from -20 to +50 °C

We offer you a used levelling plate here. Technical data for the compensating plate: Manufacturer: Bito, Type PRO Suitable for the base plate L; which are mounted on the shelf stand P1-P3. The scope of delivery includes: 01x Compensating plate, used Material colour: sendz. galvanized Total width: approx. 120 mm Total depth: approx. 105 mm Material thickness: approx. 0.5 mm Hole spacing (center - center hole): approx. 95 mm Weight: approx. 0.05 kg | Piece Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

We offer you a used levelling plate here. Technical data for the compensating plate: Manufacturer: Meta The scope of delivery includes: 01x Compensating plate, used Material colour: sendz. galvanized Dimensions: 140 x 140 mm Material thickness: approx. 3.00 mm Drill hole Ø: approx. 11 mm Hole spacing (measurement center – center hole): approx. 90 mm Weight: 0.45 kg | Piece Your contact person in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Lift system, Megamat FSE 7.1, approx. 6.91m high, min. 331kg / Shelf, Shelf: approx. 3.06m x 81cm – used - : Price ex location: 18.500.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Megamat Type: FSE 7.1 3060/816-6910 Device number: 500002536 Year of Make: 2008 Permissible total load capacity: 70,000kg Load capacity per tray: at least 331kg (possibly also 414kg or 536kg, depending on which type of tray is installed, unfortunately cannot be clarified in advance). Number of shelves: approx. 50 pieces Shelf size: 3060 x 816mm Device dimensions: Width: approx. must be submitted later (width should be approx. 3,450mm) Depth: approx. must be submitted later (depth should be approx. 3,200mm) Height: approx. 6.91m 3/N/PE 230/400V, nominal operating current 17.8A, fuse supply line: 25A Condition: good Available: from approx. End o ...

Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload The vertical storage system has been regularly serviced by the manufacturer  ...

A Cepi flour silo is available. Containers: 2. Container capacity 1: 4000kg, container capacity 2: 4500kg. Including electrical control and weighing hopper. Documentation available. An on-site inspection is possible.

The scope of delivery includes: 01x Workbench,used System substructure dimensions: approx. 1,340 x 700 mm Height of top edge worktop: approx. 938 mm Worktop dimensions: approx. 1,400 x 1,000 mm Material thickness: approx. 38 mm consisting of EACH: 02 x Workbench stand, used Manufacturer: Dexion Type: P 90 Material colour: sendz. galvanized Profile dimensions: 100 mm incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 900 mm high 700 mm deep 04 x Workbench trusses, used Shelving system: Dexion Type Speedlock P90 Material colour: sendz. galvanized Box profile: 89 x 50 mm Truss Type: SLO089|2 Clear width: 1,140 mm 08 x Dexion safety pin, used Type: Speedlock P90 Material colour: sendz. galvanized Ø Head: 13.58 mm Ø pin: 5.92 mm Weight / piece: 0,018 kg Particleboard, second choice, used Thickness: 38 mm Di ...

Pallet collar for Euro pallets Width: 865 mm Depth: 1270 mm Height: 1480 mm Suitable for Euro pallets: · Pallet dimensions: 800 x 1,200 mm (WxD) · For optimal use of the pallet surface · Quick installation · Collapsible for space-saving storage · Surface: green · Stackable: 4-fold · Payload: 300 kg More items - new and used - can be found in our shop! International shipping costs on request!

Pallet collar for Euro pallets Width: 865 mm Depth: 1270 mm Height: 1480 mm Suitable for Euro pallets: · Pallet dimensions: 800 x 1,200 mm (WxD) · For optimal use of the pallet surface · Quick installation · Collapsible for space-saving storage · Surface: Light blue · Payload: 300 kg . Stacking height bearing: 4-fold More items - new and used - can be found in our shop! International shipping costs on request!

Parts cleaning device, IBS, – used - : Price per unit: 350.-€ (net) Manufacturer: IBS Scherer GmbH Type: Type F2 Year of Make: 2003 Serial Number: 44675 Power connection: 1/N/PE 230V, 50Hz, Nominal Inputs: 18W, 0.2A Load capacity: 60kg Width: 800 mm Net weight: 50 kg Barrel size: 50 liter keg Frame Material: Sheet Steel Height: 1125 mm Cleaning type: Special cleaner Cleaning basin width: 790 mm Cleaning basin depth: 540 mm Condition: good Available: immediately Location: Frankenberg camp / Saxony

Technical data for the footplate: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Footplates, new Type designation: FT911 suitable for frame profile width 75 mm Material colour: RAL 5010 Gentian Blue Total width: 165 mm Total depth 80 mm Material thickness: approx. 6.00 mm Weight: approx. 0.64 kg | Pcs. Incl. the following mounting material: 02x Hexagon Bolts M10 x 30 mm 02x Nuts M10 04x Washers M10 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Technical data for the footplate: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Footplates, new Type designation: FT111 suitable for frame profile width 100 mm Material colour: RAL 5010 Gentian Blue Overall width: 175 mm Total depth: 105 mm Material thickness: approx. 6.00 mm Weight: approx. 1.06 kg | Pcs. Incl. the following mounting material: 02x Hexagon Bolts M10 x 30 mm 02x Nuts M10 04x Washers M10 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.