other machines for mechanical handling used for sale (5,495)

Two similar Netzsch progressive cavity pumps are available. Power: 15kW, max. delivery pressure: 8bar, delivery rate: 1000l/h, speed: 1450rpm, max. viscosity: 1000Pas. One of the machines is mobile. On-site inspection is possible.

A lifting, tilting, and sorting system for bulk materials within grid boxes is available. The system lifts the grid boxes approximately 3-4 meters high, tilts them into a transport vibrator, and the parts are then provided to the sorting system in a reduced quantity (feed rate regulation). Load capacity: 1000kg, pressure: 140bar. Documentation available. On-site inspection is possible. Expected to be available from the end of 2024.

Various conveyor belts, Z-slope conveyors, Z-track conveyors, belt conveyors and a conveyor belt with cleats from the manufacturers Göztepe and Lübke are available. Documentation for Göztepe available. On-site inspection is possible.

Two AmbaFlex spiral conveyors are available. 1) Height: 3100mm, infeed height: 1400mm, slat width: 400mm. 2) Height: 2650mm, inlet height range: 600mm-800mm, slat width: 400mm, defects: Torque support motor and missing foot disk. Can be repaired as required before sale. Documentation available. On-site inspection is possible.

Suction capacity: 78m³/h, final pressure: 60mbar, motor power: 1.5kW, speed: 1500rpm, weight: approx. 200kg. Documentation available. On-site inspection is possible.

A complete bucket conveyor system is available. 1) Mobile bucket, year of construction: 2016, volume: 1000l. With internal coating and drives. 2) Mobile bucket, year of construction: 2013, volume: 1000l. The machine is overhauled, including drives. 3) Mobile bucket, volume: 1000l. The machine is not overhauled, with drives and dismantled rotary motor. 4) Switch. 5) Running rails, length: approx. 150m, track width: 1000mm, year of manufacture: 1970-1995, including two 90° curves and partly with lattice girders and reinforcements. 6) Running rails, year of construction: 2018, length: approx. 96m. Including two 45° curves. The bucket conveyor system is without gantries. On-site inspection is possible.

Several roller conveyors are available for washing baskets that were set up in a low-dust production area. Wash basket width: 500mm. Single pieces without drive. Including swivel table. The roller conveyors are ready for collection.

A complete material conveyor system for plastic granulate is available. Components: Control system for 10 end devices, side channel compactor with filter and six color dosing devices for direct coloring, six material conveying pots. On-site inspection is possible.

A Kuttler automatic handling machine that moves workpieces or material blanks on a production line is available. Infeed height: 1050mm, outfeed height: 900mm, cutting and turning range: 90°, workpiece lowering: 150mm, machine dimensions X/Y/Z: approx. 14500mm/1000mm/2100mm, weight: approx. 750kg. Documentation available. On-site inspection is possible.

Lifting capacity: 100 KgMagnetic field: 70 x 60 mmweight: 5 Kgdimensions: 100 x 120 x 120 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting capacity: 1000 KgMagnetic field: 258 x 176 mmweight: 0,031 tdimensions: 0,26 x 0,18 x 0,16 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 20000 kgheight of stroke: 130 mmTotal height: 327 mmweight: 33 kgdimensions: 250 x 280 x 330 mmHydraulic machine jackFoot height 26mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting capacity: 600 KgMagnetic field: 228 x 122 mmweight: 0,022 tdimensions: 0,23 x 0,122 x 0,112 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 almost identical, mobile loading bridges from 1.45 m to 0 Manufacturer Fa Butt, Factory No, 80110001281 A Year of construction 2010 Load capacity 7,000 kg

Inclined elevator, see photos

Cross transport trolley for rails + scissor lift table with castors Brand: WTT Length 3000mm

Foot: 900 mm Vertical: 4980 mm Head: 2770 mm Belt speed: 0.47 m/s Flow rate: 10.0 cbm/h Bulk density: 0.18-0.25 t/cbm Engine power: 0.55 kW Speed range: 136 rpm Chain drive: 5/8" Chain Pulley Motor: Z = 15 Sprocket B. movement: Z = 38 Shaft design: sheet steel 3+4mm Removable side plates in the base Further measurements can be found in the attached plan.

Total height: 5100 mm Total length of the lower horizontal part: 3600 mm Total length of the upper horizontal part: 4777 mm Number of entries: 2 Number of intermediate outlets: 1 Chain speed: 19.9 m/min Chain length: 40 m Cup Type: 33 PP Further information can be found in the data sheet.

weight max. in kg: 3500 kgstroke: 4,8 mmfork length: 1200 mmbattery: 80V/280AH Li-ionweight of the machine ca.: 5,0 tdimensions of the machine ca.: 3,94 x 1,23 x 2,25 mNew EP EFL 352 with LI-ION battery and charger.Triplex mast of 4.8 metersLoad capacity of 3500 kgHeadroom of 2.25 meterswith sideshift and 4th hydraulic function5 year guarantee on the battery and 1 year on the forklift.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting capacity: 2000 KgMagnetic field: mmweight: 80 Kgdimensions: 0,5 x 0,25 x 0,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting capacity: 1500 KgMagnetic field: mmweight: 0,045 tdimensions: 0,44 x 0,22 x 0,25 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting capacity: 300 KgMagnetic field: 228 x 122 mmweight: 16 Kgdimensions: 0,23 x 0,122 x 0,112 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Angled bucket elevator with a bucket size of 0.5 l. per bucket, drive via geared motor 1.5 kW, conveying capacity: +/- 10 m³/h (depending on material, manufacturer's specs), horizontal conveying path (middle inlet to middle ejection): approx. 5.3 m, inlet height: approx. 0.7 m, discharge height: approx. 3.2 m. The rubber belts were not cut during disassembly.

new corpus turning up machine - fixed elements Brand: Formetal Type: RT.90F technical data: - fixed elements Transport input length 2.500 mm Transport output length 1.000 mm Transport width 600 mm Working height infeed conveyor 700 mm working height outfeed conveyor 250 mm Transport speed 10 - 25 m/min. (with inverter control) Different speed for load and unload max. weight 100 kg - corpus turning up machine RT.90F without electric equipment OPTIONAL: - Safety light barrier (infeed and outfeed) - electric box with SIEMENS PLC S71200 - Safety fence

The machine could also be used as a transport belt conveyor. Transport input length 2.000 mm Transport output length 1.000 mm Transport width 600 mm Working height 500 - 700 mm Transport speed 7 - 35 m/min.

description: Type of transport chains (pitch): roller, pitch 190mm/140mm roller carriage without motor Nominal width and installation dimensions can be changed propulsion: 0,55 KW motor with brake Usable width: 1170 mm transport size: 2960 x 1888 x 1300 mm Installation dimension: 10400 x 1580 x 650 mm weight (m) [kg]: 1500 Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of cou ...

propulsion: SEW motors description: We are offering a complete empty pallet checking station incl. a GOOD pallet magazina and a BAD pallet magazine, incl. chain- and roller conveyors as well as incl. a protecting fence The placement can be adapted individually. Pallet inspector, pallet inspection machine. We do also have more conveyors on stock which we could offer you. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzg ...

description: Here we offer a Siemens Simatic Coros OP25 panel. The panel is still packed in its original packaging, unused and in a perfect condition. After delivery / pickup, you have the right to return the panel without giving reasons, within 4 weeks unfree and get back the purchase price afterwards. Furthermore we offer used inverters of the VLT 5000, 2800 and FCD series in different designs and performance levels. Also with or without BUS card. Before delivery, the inverters are professionally formatted to allow an uncomplicated re-start. DRINK has more than 4,000 mainly used but also original packaged components in stock. Including Siemens S5 / S7 PLC. Contact us, if you can not find the right component. All statements without guarantee. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in r ...

propulsion: 0,75 kw motor wihtout brake 1380 r/min description: with pusher and modular belt availability: immediatelly Installation dimension: 1405 x 1120 x 200 mm Usable width: 500 mm transport size: 1550 x 1200 x 1300 mm weight (m) [kg]: ca. 250 kg Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK techn ...

propulsion: 0,55 KW motor with brake, 1360/47 r/min description: Nominal width and installation dimensions can be changed availability: immediatelly Usable width: 1250 mm transport size: 2500 x 1700 x 1330 mm Installation dimension: 9060 x 1580 x 660 mm weight (m) [kg]: ca. 1500 Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-s ...