other energy machinery used for sale (2,508)

Circuit breakers, motor protection circuit breakers, power breakers, disconnect switches, low-voltage networks, circuit breakers for transformer, generator and plant protection, load break switches -Manufacturer: Klöckner Moeller, Circuit breaker, fuse-switch disconnector 250 A -Type: NZM 9-250 -Rotary drive with: extension -Dimensions: 340/140/H215 mm -Weight: 7.1 kg

Transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: ismet, Transformer -Type: MTSN -Item No.: 700287 -Power: 63 VA -Voltage: 230V / 24V -Technical data: see photo of the nameplate -Dimensions: 80/70/H80 mm -Weight: 1.1 kg

Transformer, converter, three-phase autotransformer, three-phase transformer, single-phase transformer, control transformer -Manufacturer: Günter Kirch, Transformer Control Transformer Type STR -Power: 630/1800 VA -Voltage: 380V / 220V -Technical data: see photo of the type plate -Dimensions: 150/115/H145 mm -Weight: 7.7 kg

Transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Klöckner Moeller, Transformer type STK 0.75 -Item No.: 175621 -Power: 0.75/1.7 kVA -Voltage: 380V / 230V -Technical data: see photo of the nameplate -Dimensions: 140/155/H150 mm -Weight: 8.3 kg

Transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Frei, Transformer -Type: DGSN 137-208.200 -Power: 1500 VA -Voltage: 400V / 24V DC -Technical data: see photo of the nameplate -Dimensions: 325/150/160 mm -Weight: 9.7 kg

Transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: ismet, transformer -Type: ISTK -Item No.: 469133 -Power: 1500 VA -Voltage: 380V / 110/220V -Technical data: see photo of the nameplate -Dimensions: 220/155/H150 mm -Weight: 13.1 kg

Transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: ismet, transformer -Type: DG -Item No.: 603133 -Power: 960 VA -Voltage: 380V / 24V -Technical data: see photo of the nameplate -Dimensions: 240/210/H225 mm -Weight: 15.4 kg

Additional title: gas burner for steam generator, Min. capacity: 900 kW, Max. capacity: 5100 kW, Min. pressure: 10 mbar, Max. pressure: 140 mbar

Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge, tubular heating element -Manufacturer: Kanthal, electric tubular heating element -Type: 17.003-112/3 12 spirals -Dimensions: see photos -Overall dimensions: 1240/340/22 mm -Weight: 6.3 kg

Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge, tubular heating element -Manufacturer: Kanthal, electric tubular heating element -Type: 6 spirals -Dimensions: see photos -Overall dimensions: 1235/210/22 mm -Weight: 3.3 kg

A screw compressor Atlas Copco with integrated refrigerated dryer including a 500l compressed air receiver is offered. Motor power: 22kW (30hp), Volume flow: 3.84m³/min (64l/s), max. operating pressure: 12.8bar, Operating hours: 29897h, Refrigerant dryer: R134a, 0.95kg. The compressor was serviced annually without interruption by a qualified specialist company. Documentation available. Inspection possible by appointment.

Power: 15kW, maximum shaft speed: 3000rpm, oil capacity: 6l, tank capacity: 500l, operating pressure: 10bar, capacity: 2.2m³/min, control panel: Logik 9, length: 1915mm, width: 650mm, height: 1640mm, weight: 530kg, operating hours: 2h, with Wortmann drukosep 2 oil-water separator. Inspection on site is possible.

Mold heating, resistance heating device, transformer heating unit -Manufacturer: Sokol-Therm, resistance heater, portable -Type: 50 kVA 6 control circuits -Individual components: see photos -Dimensions 1000/770/H1510 mm -Weight 492 kg

A high-temperature water temperature control unit for injection molding tools, extrusion systems, die-casting tools and industrial temperature control processes up to 200°C is offered. Temperature range: 0°C to 200°C, circulating medium: water, heating capacity: 45kW, cooling capacity: 120kW, filling volume main unit: 32l, filling volume valve unit: 2l, weight: approx. 300kg, dimensions X/Y/Z: approx. 700mm/900mm/1900mm, weight of the valve unit: 37kg. Equipped with control via touch-screen visualization, separate control cabinet and external valve unit for high-temperature applications. Documentation available. Inspection possible by appointment.

Ride-on scrubber-dryer, scrubber-dryer, floor cleaning machine, mop, floor cleaner, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter -Air filter: Intake air filter -Type: unfortunately without a type designation -Inside/Outside: Ø 215/350 mm -Dimensions: Ø 350 x 605 mm -Weight: 6.1 kg

Friga-Bohn Table Cooler ECA 118 L2 8P Air cooler from 1999, approx. 250 KW cooling capacity. Was cooling of two 50 KW gas CHP plants. 2 fans. Manufacturer: Friga-Bohn Model No.: ECA 118 L2 8P Type: Table cooler with two motors Serial number: ER 040 Cooling capacity [KW]: approx. 250 Fans: 2 Motors: 2 x 400 V, 50 Hz Year of Make: 1999 Weight unit [kg]: 360 Dimensions LxWxH [m]: 3.15 x 1.30 x 1.20

IMEFY Cast Resin Dry-Type Transformer 1000 kVA with Siemens Control Cabinet Manufacturer: Imefy Power: 1000 kVA Type: Cast resin dry-type transformer Condition: used, functional Location: Pforzheim

Chiller, cooling water circuit, heat exchanger, cooling for spot welding equipment, spot welding machine, spot welding system, spot welding gun, cooling unit -Manufacturer: Deltatherm, Deltatherm -Type: DE-HI -Power: 1.7 kW -Individual components: see photos -Dimensions: 1300/800/H1760 mm -Weight: 321 kg

-efficiency Pack eP IP 05.15 -previously ran on a biomethane CHP plant -ran even at low flow temperatures around 80 °C -also at outside temperatures around 30 °C

- Station is connected and was in operation at a CHP plant - Went into operation in 2014 - AVACON grid area - has been serviced via maintenance contract from AVACON -

Refrigerant: R407C, refrigerant charge: 28kg, max. operating pressure high pressure side: 25bar, oil fill quantity: 5.5l, cooling medium: water, volume: 6l, max. operating temperature cooling medium: 35°C, sound pressure level: 74dB(A), ambient temperature: -5° to 45°C, connected load: 12kW, max. electrical fuse protection: 21A, operating voltage: 400V, control voltage: 24V/230V, weight: 340kg. An on site inspection is possible.

A compact FIC/Rivacold chiller is available. Usable volume: 410l, cooling capacity: 33.7kW, compressor: S15-52Y, compressor power: 15HP, tank load capacity: 725kg, refrigerant: R404A, cooling tower water consumption: 9.3m³/h, cooling unit water consumption: 3.6m³/h, machine dimensions X/Y/Z: approx. 750mm/1600mm/1900mm. Documentation available. An on-site inspection is possible.

Installed power: 18.1kW, voltage: 400V, phases: 3, frequency: 50Hz, max. current consumption: 30.8A, protection rating: IP54, permissible water operating pressure: 6bar, max. water temperature: 65°C, refrigerant: R404A, refrigerant charge: 8.8kg, max. refrigerant pressure: 26bar, ambient temperature: 5-43°C, weight: 416kg, with CE marking. An inspection on site is possible.

Air cooler with water circuit of 300 KW emergency diesel Engine cooling with cooling fins, fan and water circuit. Suitable for emergency diesel up to 300 KW engine power. previous use: Henschel Diesel 304 KW Application: Cooling of emergency diesel up to 300 KW Serial Number: – Type: Air Cooling with Water Circuit Year of Make: 1962 Hours: 769 Dimensions [m]: 1.4 x 1.1 x 1.6 Weight: 441 kg

A compressor is offered. Drive power: 18.5kW, Delivery rate: 2910ltr/min, Max. operating pressure: 8bar. Dimensions X/Y/Z: approx. 1287mm/799mm/1296mm, Weight: approx. 540kg. Inspection possible by appointment.

PLC control, electronic module -Manufacturer: Siemens -Type: Simatic S7/6ES7 -Modules: see photos -Number: 3 assemblies available -Price: per assembly -Dimensions: 170/220/H75 mm -Weight: 1.2 kg /piece

- Doosan natural gas/biomethane CHP 250 kW -Gas pressure control system - ORCAN Low Temperature ORC 15 kW Net - Heat meters - EEG 2012-8 years remaining term - Installed in concrete sound hood - with workshop room - 800 kVA compact transformer station 20/0.4 kV - Fiber optic connection - Camera system (10 cameras+recorder) - Grounds approx. 500 sqm fenced

K+S Control GTK 150K Switchgear and control system built in 2012 von Kuntschar und Schlüter (Wolf) GTK 150 K. 400 / 231 V / 50 Hz, 315 A Manufacturer: K+S (Wolf) Model: from GTK 150 K Type: Switchgear and control system Serial Number: 822 Voltage [V]: 400 / 231 Current [A]: 315 Frequency [Hz]: 50 Year of Make: 2012 Weight [kg]: 330 Dimensions LxWxH [m]: 2.20 x 1.60 x 0.50

Transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Romarsh, three-phase transformer from CNC machining center Mikron VC500D -Type: 3UR5-0/64 -Power: 10 kVA -Dimensions: 315/215/H275 mm -Weight: 45.5 kg

Transformer, converter, three-phase autotransformer, three-phase transformer -Transformer: from CNC machining center Mikron VC500D -Type: PTNo.. PTC 2500/139 -Power: 1200 VA -Dimensions: 215/210/H255 mm -Weight: 30.2 kg