miscellaneous used for sale (1,761)

Offer: Sgmmns container wagon for 20' and 40' containers We would sell these from location Europe: Unit price is from Station Europa see specification in the appendix: Offer price for these cars: on request €/piece plus VAT These cars can be taken on the hook immediately after inspection and payment. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices; The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Error reserved; All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty; We do not accept  ...

Dear Sir or Madam loading facility with big capacity of conveyor route can be offered. immediately operationally. pictures and further information on inquiry. with friendly greetings Trade and Translations

Ladies and gentlemen, we can offer you on request various aircraft spare parts new and used. With a friendly greeting Trade & Translations

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", we offer you: Number: about 30 passenger coaches technical data Passenger coaches 1st year of construction: 1977 to 1981 2. Weight: 33 t 3. Seats: 72, 2nd class 4. Longitudinal racks 5. Length over buffer: 23700 mm , 6. Side length 23400 mm 7. Rotary pin spacing: 17600 mm , 8. Rotating salmon distance: 2700 mm 9. Total axis distance: 20300 mm 10. Wheelset type: YRP and YRF All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, et ...

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: A used railway locomotive Built for sale, perhaps also for rent. Information and pictures on request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices; The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty; ...

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: A used railway locomotive about 3,000 hp for sale. Year of construction young Information on request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept a ...

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: Railway railcars Information and pictures on request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 10,000 litres double-walled used, with a new diesel pump Vision 60 The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 Diesel pump Vision 60 (new) . Flow rate approx. 50 LTR/min . Hose length 4mtr can be extended. Container dimensions Length 5,310 mm Diameter 1,600 mm Weight approx. 1,500 kg Of course, you can also use your tank system. We are happy to offer you diesel pump ...

Hoffmann rail crane, track 1m, telescopic crane extension 16m, lifting load 16t, electric overhead drive, or MAN diesel engine. Weight approx. 45t. For questions 0049 1604444300 net price 12.500,-€

This 3-axis KIHEUNG KNC-U1000 was manufactured in 2007. It features a spindle speed of 4000 rpm and an ISO50 taper. The machine is equipped with a 40-tool automatic tool changer and coolant through the spindle for enhanced efficiency. If you are looking to get high-quality machining capabilities, consider the KIHEUNG KNC-U1000 ed type milling machine we have for sale. Contact us for further details.

RD-2 in a complete set, 20 boxes of 20 each. The set includes a filter, bag, anti-gas. The price is negotiable.

This 3-axis Butler CS10 Bed Type Milling Machine was manufactured in 1975. It features a large 10,000 mm table length, 1030 mm table width, and a robust ISO 50 spindle taper. The main motor power is 11 kW, ensuring heavy-duty machining capability. It also includes original Elgamill guides for precise column travel. Consider the opportunity to buy this Butler CS10 Bed Type Milling Machine. Contact us for more information about this machine.

This 11-axis Finn-Power SG6 12.61 was manufactured in 2010. It features a maximum punching force of 300 kN and can handle sheet thicknesses up to 6 mm. The machine includes a thick turret with 20 stations and an integrated CNC right-angle shear for efficient part separation. If you are looking to get high-quality punching capabilities, consider the Finn-Power SG6 12.61 punching and bending machine we have for sale. Contact us for further details.

This 3-axis Soraluce TA-20 bed type milling machine was manufactured in 2005. It features a substantial table size of 2,000 x 800 mm with a maximum table load of 4,000 kg. The machine offers impressive X-axis travel of 2,000 mm and rapid traverse speeds of 25,000 mm/min. If you are looking to get high-quality milling capabilities, consider the Soraluce TA-20 machine we have for sale. Contact us for further details.

This 3-axis Soraluce TA-A20 bed type milling machine was manufactured in 2005. It features a longitudinal traverse of 2,000 mm, a cross traverse of 1,000 mm, and a vertical traverse of 800 mm. The machine is equipped with an automatic indexing head and a spindle speed range of 20 to 4,000 rpm. If you are looking to get high-quality milling capabilities, consider the Soraluce TA-A20 machine we have for sale. Contact us for further details.

Potence pour révision de centrifugeuse décanteur Alfa Laval

CHILLER ✔️ Brand: Carrier ✔️ Model: 30XA ✔️ Year: 2012 ✔️ Fluid: R134a ✔️ Load: ~134 kg ⚙️ Key features: Power consumption: ≈ 312 kW Max amperage: ≈ 522 A Power supply: 400V – Three-phase – 50 Hz Weight: ≈ 6723 kg

The SolidC UltraPure pump is an efficient and economical centrifugal pump that meets the requirements of pharmaceutical industries. It gently handles products and resists chemical agents., Pump: Centrifugal pump , Dn (mm): 34 , engine type: WEG, dn (mm): 34 , Engine power: 380V 50Hz 11kW , Link to manufacturer: .alfalaval.fr/

Swiss-made Isoma centering microscope, in very good condition. 10x magnification, hardened and ground steel tube Ø25h5. Zentriermikroskope der Schweizer Marke Isoma. Vergrösserung 10x, Stahltubus Ø25h5 gehärtet und geschliffen. Zustand: sehr gut. Centering microscope from the Swiss brand Isoma. Magnification 10x, Steel tube Ø25h5 hardened and grounded. Great condition.