meat and fish processing machines used for sale (1,866)

Ref. №: 4252 Frozen meat block guillotine 2 pcs knives for transverse cutting 2 pcs knives for longitudinal cutting Block cross-section: 520 x 300 mm Processing temperature: > -25 °C Max. throughput: 5000 kg/h Hydraulic lifting device Machine dimensions in cm: Width: 110,0 Length: 240,0 Height: 190,0 Installed power: 6,0 kW Voltage: 400 V, 50 Hz

Ref. №: 4386 Automatic slicer 1 long portioning conveyor, approx. 2,800 mm, belt width 410 mm Maximum cut-off length (mm/inch) 0.1–55 mm Maximum value of cuts/min.: 300 Maximum infeed length 800 mm Circular blade diameter: 420 mm Cross section of product w x h (mm/inch) 280 x 160 1 standard gripper, height approx. 100 mm, width approx. 180 mm Maximum stacking height (mm)100 Connecting load (kW) 4.8 Machine dimensions in mm: Width: 1000 Length: 3800 Height: 2200 Weight: Approx. 820 kg

Ref. №: 4104 Automatic belt skinning machine Cutting width: 370 mm Width: 800 mm Depth with conveyor belts: 1850 mm Height: 1200 mm Electrical connection: 0,75 kW, 400V/50Hz/3ACV

Used vacuum filler HANDTMANN, type: VF 50 -completely overhauled- For filling, portioning and twisting. - All wear parts renewed - Oil in the vacuum pump and the hydraulics NEW - Incl. twisting gear - Computer control - Up to 300 portions per minute - Technically very good condition - 6 months warranty Capacity: max. 2,400 kg/h Filling pressure: max. 55 bar Portioning range: 5 - 100,000 g Hopper capacity: 40 / 80 l Visits and test runs are possible by arrangement.

Conveyor width: 600 mm Cut by knife cylinder Cutting width 7,0 mm Supply and unloading conveyor Machine dimensions in cm: Width: 120,0 Length: 170,0 Height: 130,0 Voltage: 400 V, 50 Hz

Continuous vacuum filler for straight filling and portioning - Machine features: - All-in-one 250 l hopper with counter arm and reinforced scraper, - Integrated vacuum pump 20 mᶟ - Double screw - Standard double screw housing Control: РС Program memory for 99 filling programs, Portion weight: from 5 up to 60 000 g Lifting and tipping device for HPC with 250 l hopper To fit standard trolley, 200 l capacity Machine dimensions in сm: Width: 134,0 Length: 220,0 Height: 200,0 Power: 9,5 kW Voltage: 380 V, 50 Hz Weight: 1300 kg

Completely made of special stainless steel Working worm and feeding worm Holeplate diameter: 160 mm Hopper capacity approx. 360 liters Cutting set consisting of: 2 knives, 1 kidney plate, plates with hole diametrs 4 and 13 mm Machine dimensions in cm: Width: 125,0 Depth: 230,0 Height: 210,0 Installed power: 37,5 kW Voltage: 400 V, 50 Hz

ype: KRAMER + GREBE MW 200 Completely made of special stainless steel Specialized for grinding cheese and yellow cheese BLOCKS Hole plate diameter: 200 mm Hopper capacity: approx. 400 liters Synchronized speed for shatter and feed screw Working worm Machine dimensions in сm: Width: 215,0 Depth: 150,0 Height: 196,0 Main Motor Power: 45 kW Installed Power approx. 65 kW Voltage: 380 V, 50 Hz

All stainless steel Hopper capacity - 450 litres Two working shafts with paddles Loading unit for 200l trolley Vacuum pump BUSCH - 21 m3 Touch screen MITSUBISHI” Power – 6.2 kW Machine dimensions in mm without loader – 1900/1050/1730(2250) Weight - 950 kg Loading unit dimensions in mm - 1100/1200/2500 Loading unit Installed power - 0,8 Kw

Capacity: 400 l Heating: gas , 36 kW Outside dimensions 94 x 130 x 122 cm (HxWxD) Inside dimensions 48x110x80 cm (HxWxD) Mouting Voltage: 230/400 V , 50 Hz Cover: insulated,with springs and hinges of stainless steel, opening 90° Drainage: piston – type drain cock Equipment: valves for cold and hot water

Automatic injector 300 needles Type: ІМАХ 620 To work with boneless meat Loading width: 620 mm Cycles: from 15 to 60 Loading max.: 60 mm Product height: 130÷220 mm Needles quantity: 300 (2 х 150) , 3,0 mm. El.connection: 400/440 V, 50/60 Hz El.connection value: 16,5 kW ; 32 А Rotating brine filter Machine dimension in mm: Length: approx. 2200 mm Width: approx. 1600 mm (approx. .2800 mm with filter) Height : approx. 2300 mm

Automatic injector 216 needles Type: ІМАХ 420 Product width: 420 мм. Cycles: from 15 to 60 Feed max.: 60 mm. Product height: 130÷220 mm Number of needles: 216, 3 mm. Brine pressure: 0,5-4,5 bar Machine charging height: 1150 mm Compressed air min. 6 bar Voltage: 230/400 V, 50/60 Hz Connection: 14,0 kW ; 32А Rotary brine filter: DF 510 Dimensions, mm: Machine length: approx. 2200 Machine width: approx. 1350 (approx. 2200 mm with filter) Machine height: approx. 2300 Weight: 1500 kg.

Type: MIX MAXI Mix volume: 450 liters Two mixing shafts with paddles Stepless speed regulation Programmable operation One outlet, mechanically operated Protective cover of hopper Lifting device for standard trolley 200 l Machine dimensions in сm: Width: 100,0 (190,00 with lifting device) Length: 180,0 Height: 220,0 Power: 5,5 kW Voltage: 380 V, 50Hz

Hooper capacity: 900 l Two working shafts with paddles Front discharge of ready product in 200 l trolley Pneumatic opening of covers Automatic stopping when cover is open Loading unit for 200l trolley Smooth regulation of speed Setting of working time Voltage / Frequency: 400 V /50 Hz /3 phasses Installed power: approx. 11,0 kW Control voltage: 24 V DC Machine dimensions in mm. (with column loader): Width: 2 129,0 Length: 2 189,0 Height: 2 745,0

Mixer 200 liters - NEW Hopper capacity: 200 l Two levels of hoper Two working shafts with paddles Power: 2.2 kW Dimensions L/W/H– 1400/750/1250 Weight: 300 kg

Mixer-grinder 130 mm Type: Seydelmann ME 130 Hole plate diameter: 130 mm 2-speed working worm 1-speed mixing paddle motor, approx. 1,5 kW with 2 mixing arms, independent of working worm, Hopper capacity approx. 170 litres (mixing capacity approx. 100 kg) Machine width: 90,0 cm Machine depth: 117,0 cm Machine height: 140,0 cm Power of motor: 18,0 kW Voltage: 400 V, 50 Hz Machine weight: 680 kg

Mixer-grinder 130 mm Type: Seydelmann ME 130 Completely made of special stainless steel Hole plate diameter: 130 mm Hopper capacity: about 170 l Throughput depending on material type, speed, cutting set up to 3000 kg/h One-speed mixing mechanism 2-speed working worm Machine dimensions in cm: Width: 90,0 Depth: 120,0 Height: 136,0 Installed power: 18 kW Voltage: 380 V, 50 Hz Machine weight: 680 kg

Mixer-grinder 200 mm 200 mm hole plate diameter Almost completely made of solid stainless steel 2-speed working worm 1-speed mixing paddle motor, approx. 1,5 kW with 2 mixing arms, independent of working worm, with automatic drive Hopper capacity approx. 300 litres (mixing capacity approx. 150 kg) Integrated lifting device, for standard meat bins Machine dimensions in cm: Width: 265,0 Depth: 175,0 Height: 190,0 Power of the motor: 37,0 kW Installed power: 40,0 kW Voltage: 380 V, 50 Hz Machine weight: approx. 1200 kg

Automatic Angle Grinder 130 mm Completely made of special stainless steel Speeds: 2 of the working worm and 2 of the feeding worm Holeplate diameter: 130 mm 400 V, 3 Ph, 50 Hz Hopper capacity approx. 130 liters Cutting set consisting of: 2 knives, 1 kidney plate, plates with hole diametrs 4 and 13 mm Machine dimensions in cm: Width: 125,0 Depth: 110,0 (120,0) Height: 135,0 (185,0) Installed power: 18,0 kW Voltage: 380 V, 50 Hz Machine weight: 680 kg

Manual single clipper Characteristics: Model- KN-6R Number of clips for 1 move- 1 Clip type- In, VR Diameter of casings, mm- 20 – 80 Cutting knife- Immobile Overall dimensions, mm:Length Width Height - 260420920 Weight, kg- 12 Weight with packaging, kg- 18

Manual machine for foiling products in trays For the packaging of food products with CSF placed in plates or on a cardboard or other material, the packaging cuts and sticks when the substrate is lightly pressed on the heating plate! The machine is designed so that there is no need to adjust the temperature of the bonding heater and linear knife. Foil width from 250 – 500 mm. Technical data: Power: 100 watts, heated plate 150 watts Operating temperature: thermo knife 100°С -140 °С, heated plate 90°С -140 °С Productivity: 6 opac. / min. Dimensions: 590 x 700 x 250 mm Weight: 8.5 kg.

Stainless steel Capacity: 15 knives and 2 table Water inlet and outlet: 1⁄2 Electrical connection: 230 V, 50 Hz Power: 2 kW Dimensions 48 × 12 × 40 cm

Stainless steel Intended for transporting cassettes with dimensions of 600x400 mm Six polyamide wheels, offset in height for control Carrying capacity: 400 kg Dimensions 65 × 42 × 16 cm

Stainless steel Dimensions: 730 / 680 / 700 mm.; Weight: 40 kg.; Bottom thickness: 5 mm.; Side thickness: 2 mm.; 4 wheels with a diameter of 150 mm.; Conform to DIN 9797;

Completely safe in operations. Protected against penetration of water splashes. The motor can be used for a long time. It can be connected to grounded or ungrounded voltage. Protective cover made of several layers of steel and plastic. Waterproof. Dimensions: 250 x 210 x 350 mm. Motor: 0.18 Kw Weight: 10 kg.

The machine serves to make tender steaks and fillets, as well as to make julienne; The machine is three-phase, with two tools /two-shaft; The machine is used to make tender steaks and fillets. It is applicable to different types of meat - pork, beef and chicken; The processed product does not reduce its volume, but quickly absorbs the marinade and, accordingly, has increased taste qualities; Meats processed in this way have a more attractive appearance for sale; A compact but extremely powerful machine; Made entirely of stainless steel; The motor mechanism runs in oil and you don't need to lubricate it additionally; Easy disassembly and cleaning of the machine; PRICE IN EURO without VAT: 2930

The machine is used for making tender steaks and filleting, as well as making julienne / strips. It is applicable for different types of meat - pork, beef and chicken. The processed product does not decrease or shrink its volume, but quickly absorbs the marinade and, accordingly, has increased taste qualities. Products made in this way have a more attractive appearance for sale. The company offers an additional set of 10 mm knives to cut the meat into strips or julienne. The machine is compact, but extremely powerful. Made entirely of stainless steel. The knife shaft consists of 74 knives in 24 parallel rows. Easily disassembled for cleaning. Pressing during processing is carried out by 888 cutting angles. The underside of the knives is also well protected. The motor mechanism works in oil and you do not need to lubricate it additionally. The machine is easy ...

Main characteristics: For grinding chilled meat; Floor model; AISI 304 stainless steel construction; With transmission system at work; Protective plate for easy loading and plunger to push the material; Solid stainless steel auger with locking mechanism; Unger system – 5 instruments; Technical data: Productivity: 1100 kg./hour; Motor power: 5.5 kW (standard motor is 4kW); Neck: 114 mm.; Dimensions L / W / H: 450 / 860 / 1100mm.; Weight: 121 kg. The price includes a complete set of grinding tools;

Professional vacuum packaging machine with stainless chamber, industrial pump, additional deep chamber and digital panel, possibility to connect to gas floor model PM-VC-400-UIG Manufacturer: Rotek, Austria; Digital panel for 50 operations and more additional functions; Built-in vacuum pump 20m³/h; Gas connection outlet/may not be used/; 2 strips for simultaneous sealing of two bags; 13 cm wide to 40 cm long at sealing seam; Deep camera – up to 260 mm; Automatic lid opening after packaging; Easy-to-use machine, with a stainless chamber with a lower cabinet and wheels for movement; For smaller bags, you can pack several together; Suitable for bags with a length of 40 cm. Through the digital panel, 50 different programs can be saved - for vacuum, for sticking, cooling time Vacuuming starts immediately after closing the lid and then the panel should ...

Main features : Manufacturer - Spain; The machine is made of 18/8 stainless steel with an anodized aluminum casing; Hardened and chrome-plated cutting disc made in Germany; Automatic sharpening device; Motor cooling fan; Guard for the cutting disc; Cutting thickness: 0÷16mm.; Maximum dimensions of the product for cutting – 270×140mm.; Maximum thickness of the product for cutting – Ø170mm.; Diameter of the cutting disc – Ø250mm.; Power: 0.33 hp; Dimensions: 590/700/425mm.; Weight: 28 kg.;