meat and fish processing machines used for sale (1,868)

PVS type: PVS 125 V Feinstzerkleinerer micro cut year 2013 power 11 KW Hopper volume standard 45 liters Product quantity the hour depending on the desired fineness of the output product ca 300 to 1000 kg an hour with special equipment for sauces, soups, mayonnaise and other liquid / creamy products

Handtmann VF 200 Filling portioning linking MC control Loading device The machine is immediatley available and can be inspected in our facility in Koblenz, Germany.

K+G Wetter Angle-Grinder E 130mm, 130mm, all stainless steel, 2 speeds, sorting device, in very good condition. The machine is immediatley available and can be inspected in our facility in Koblenz, Germany.

APV K 55 plate apparatus, 6 departments, Y.O.M.1994, late 2005 dismantled, cleaned, new clip seals and plates UV tested. test log exists. Power approx. 960,000 Kcal/h

PVS Micro cut model MC 12 Machine for chopping up of various products engine 9 kW of U / min. 3000 funnels state kind 45 Litre of other funnels größen on wunsch and against surcharge

plate heat exchanger Gea Ahlborn with 2 centrifugal-pumps:(hotwaterpump and recirculationspump) Manufacturer: Gea Ahlborn 6 Sections: preheater 1,preheater 2,heater,precooler 1,cooler,hotwater Type: VT 4 P (1.4401) Fabr.Nr.: 177/4113 flow rate: ca. 750 ltr/h (5 to 72/75°C) - 80 % gain of heat day of construction:1994 weight : ca. 220 kg Dimension : length x width x hight: ca. 103 x 44 x 143 cm

Cheese pan / layered cheese pan / curd tub / drain versatile use Dimensions: Length x Width x Height: 61 x 62 x 81 cm Content approx.: 75 litres Expiration NW: 50

Double flat clip machine DKF 15/15 overhauled 2009 - see display category Packaging machines -

Stainless steel pumps, Hilge, Fristam, various versions and sizes, various models, partly new

Stephan Shredding Machine Type: MCH-D 60A or MCH-D 30 Machine almost complete Nirosta Product-contact parts 100% Nirosta Power: Approx. 45 KW Product output approx. 2000 Kg hour MCH-D 30 Product output approx. 4000 Kg hour MCH-D 60

Injector penkomat with 16 needles The machine is complete Nirosta

DICER MACHINE, FAM TYPE YURAN Technical description: FAM, Type YURAN. Serial number: 6162 400 V, 3 Ph, 50 Hz, 4 kW Weight: 600 kg, Belt: plastic belt, belt width: 270 mm, working width: 220 mm 28 knives, distance between knives: 8 mm Total dimensions: 2700 mm x 850 mm x 1450 mm

GRINDER, KRAMER + GREBE TYPE: WIWO200 Technical description: Serial number: 198/192 Material: Stainless steel Outlet diameter: 200 mm Power supply: 380-440 V/50-60 Hz Dimensions: 1550 x 1650 x 1700 mm

HORIZONTAL STEAM COOKER, MECALSA, TYPE: MC V-1600 Technical description: Load capacity (Tuna type ± 2 Kg): 2 Tons Diámeter (inside): Ø 1.600 mm Cooker lenght: 4.550 mm Heating: FRESH/STEAM system Cooking: Direct steam Programs: Washing, cooking, humidifying and cooling - AUTOMATIC Temperature control: cooking environment and fish bone

MULTI-PURPOSE DICER-SLICER, TREIF, MODEL: 80 Technical description: Ideal for meat, with or without bone, and vegetables. Serial number: 298S-70052 Current format: 25 x 25 mm (other formats available) Material: Stainless steel Power supply: 380-440 V / 50-60Hz

SLICING-CUTTING AND DICING MACHINE, URSCHEL, TIPO RA-A Technical description: It works with meat and vegetables. Serial number: 1027 Material: Stainless steel Power supply: 380/440V - 50/60Hz Dimensions: 1000 x 930 x 1590 mm Includes spare parts kit Slice thickness: 1/16 a 3/8 inch. (1,6 a 9,5 mm) Circular blade cuts: 1/8 a 1 inch. (3,2 a 25,4 mm) Cross cut blades: 0,05 a 3 pulg (1,3 a 76,2 mm) The RA-A model produces a wide range of diced and shredded cuts of a variety of products, such as fruits, vegetables, seasonings, nuts, and processed meats. Maximum product inlet size is 3-1 / 2 in. (88.9 mm) in any dimension. The RA-A offers continuous operation for uninterrupted production and a simplified design for easy cleaning and maintenance.

GLUING MACHINE, STORK, TYPE: ERT 630 Technical description: Bandwidht: 630 mm Material: Stainless steel Aisi 304 Power supply: 380/440 V - 50/60Hz Dimensions: 1500 x 1200 x 1800 mm

VACUUM MASSAGE AND SALTING MACHINE, SUHNER AG TYPE: VT1500E Technical description: Power supply: 380-440V/50-60 Hz Machine No: 931 500 247 Power: 4,7 Kw Dimensions: 1900 x 1500 x 1900 mm

SALMON SLICER-PORTIONER, GEBA TYPE: GPS 200 ASW Technical description: Serial number: 6000 204 Year: 2002 Power supply: 380/440 V - 50/60 Hz - 3 Ph Band width: 390 mm (plastic) Weight: 475 Kg Dimensions: 2750 x 1000 x 1490 mm The GPS 200 ASW is the Top Slicer. When the GP series was introduced in 2000 it caused a revolution. The industrial look initiated a new design- era at GEBA. With the new GPS 200 ASW we matched the challenge, to keep on perfektioning this extraordinary line of products, not only optically but also technically. Now you increase your yield and profit with computer-controlled adjustment (ASW) of the slice thickness and the cutting angle.

PEELER- SKINNER, TRIO, TYPE: FDS 104 Technical description: Plastic wired belt Belt width: 350 mm Power supply: 380/440 V - 50/60Hz Dimensions: 2200 x 1200 x 1500 mm The TRIO FDS Skinning Machine will skin most kind of fish fillets. The machines are used for skinning Sale and other flat fish, Hake, Haddock, Whiting, Merluza, Hoki, Orange Roughy, Herring, Mackerel, Sardines, Salmon, etc. The machine operates on the principle that the skin of the fillet freezes and glues to the cold, rotating drum, and thus is held in position. The freezing is approx. 1/10 mm deep. A rotating band knife cuts the fillet away from the skin, and the skin is then scraped off the drum. The thickness of the cut, and thus the depth of the skinning, is infenitely adjustable between 0-12 mm. The refrigeration system operates on a system of indirect cooling, a sealed refrigeration unit cooles down a secondary cool ...

GRADING - WEIGHING MACHINE, MAREL PROLINE, TIPO: GRA-PR30-04 Technical description: Serial number: A064049 Number of stations: 4 Power supply: 220/240 V - 50/60Hz Conveyor band: Intralox series 1650 ftpp b = 305 Conveyor width: 305 mm Total dimensions: 4900 x 1300 x 1650 mm

BREADING MACHINE MAREL TOWNSEND FURTHER PROCESSING B.V., MODEL: TRM 630 Technical description: Marel Townsend Further Processing B.V. rolling machine. Model TRM 630 Type 472640 Serial number 10096047 Plastic belt, belt width: (2x) 630mm Total dimensions: 2050mm x 1300mm x 2100mm

CAN SEAMER SOMME, MODEL: 444, ¼ CLUB FORMAT Technical description: With protective fairing Throughput rate: ± 80/90 Jars/min Power supply: 380-440V/50-60 Hz

VACUUM STUFFER, VEMAG ROBBY1, TYPE:134 Technical description: Serial number: 134 0454 Power supply: 220-380 V/ 50-60 Hz, 5.1 Kw Approx. weight: 425 Kg

DOUBLE SHAFT PADDLE MIXER, NAWI (1200 LT) Technical description: Capacity: 1.200 lt Power supply: 380-440 V / 50-60Hz Bowl dimensions: 1160 x 1230 x 900 mm Dimensions: 2400 x 1650 x 2350 mm

FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Machine number: VM 600 HS-481 Power supply: 380 V, 45.47 A, Ph 3, 50 Hz Power: 22.09 Kw Weight: 1675 Kg Conveyor width: 600 mm Dimensions: 2400 x 1300 x 2100 mm Different formats available

FORMING MACHINE KOPPENS, MODEL: VM 600 Technical description: Serial number: VM-600-55 Power supply: 415 V, 3 Ph, 50 Hz, 23 A Power: 11,31 kW Conveyor width: 600 mm Form size: (7x) 60 mm Weight: 850 Kg Dimensions: 2000 x 900 x 1950 mm

FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Serial number: VM 600 HS-281 Conveyor width: 600 mm Weight: 1.750 Kg Power supply: 380 V, 3 Ph, 50 Hz, 45 A, 22 kW Dimensions: 2400 x 2100 x 2200 mm

RÜHLE FROZEN BLOCK CUTTER, TYPE GFR 450 Technical description: Guillotine for cutting frozen meat and other types of frozen blocks such as frozen fish blocks, frozen blocks of vegetables and fruits to minus 20 degrees Celsius. The Ruhle guillotine achieves a capacity of up to 3000 kg/h and has also been adapted for inclusion in the technological line. The device has been equipped with 4 vertical cutting knives, which allows fine shredded cut block. A separate container for felling and very accurate feeding of the trolley to the finished product minimizes the loss of raw material. Maximum cut dimensions of the block: 450×250 (mm)