meat and fish processing machines used for sale (1,867)

Flake Ice Machine / Rotary Evaporator with Silo Manufacturer: MAJA Type: RVH 1500 CO2 The flake ice generators of the MAJA RVH series can be integrated into refrigeration concepts that are designed for environmental compatibility and sustainability. Specifications: Year of Make: 2019 Ice capacity approx. 1500 kg / 24h Dimensions of the entire facility: width 175 cm / depth 130 cm / height 230 cm Weight approx. 450 kg Electrical connection 3AC/50Hz/400V/PE0.28 kW Control: Maja Touch Panel (optional) Refrigerant required: R744 Function checked / machine ready for immediate use! Condition and accessories see original pictures! If you have any questions, email or call.

Aufschnittmaschine / Slicer GRAEF MASTER 3020 Specifications: 230 Volt / 50 Hz / 2.2 A / 500 W Cutting thickness adjustment: 0 to 24 mm Knife diameter: 300 mm Stainless steel knife incl. grinder Luminous flux Machine with CERA 3 coating Weight: 37 kg External dimensions (L/W/H): 500 x 600 x 420 mm Cutting size: L 260 x H 195 mm Cutting thickness 0 – 24 mm Carriage dimensions: L 260 x W 300 mm Installation area: L 540 x W 440 mm External dimensions: L 600 x W 570 x H 420 mm Working area: L 680 x W 720 x H 570 mm Knife speed: 230 rpm with weighing function up to 0 - 5,000 g (not legal-for-trade) Year of manufacture: 2018 Function checked, machine ready for immediate use! RRP: EUR 5,057.50 Condition, see original pictures! If you have any questions, email or call.

Inclined Slicer Slicer / Slicer BIZERBA GSP H Specifications: 230 Volt / 50 Hz / 1.79 A / 0.360 kW Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife including original knife sharpener Luminous flux Year of Make: 2017 Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call.

Fully automatic slicer Bizerba Type: A404 Specifications: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife including original Bizerba sander medium-sized carriage for a maximum of 40 cm of food to be cut Stainless steel base frame Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of Make: 2009 Function checked, machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

Boiling kettle Brökelmann 200 L, side kettle mobile, electric heating in the glycerine bath, diameter of boiler approx. 70cm, depth approx. 54cm, Total dimensions LxWxH approx. 85x105x100cm, connection 400V very good used condition, fully functional

Rühle Frozen Meat Slicer Type GFR 450 / 250 CW 5.5 Cross cutter 4 pieces

Kolbe MWE32 Mixed Meat Grinder completely in stainless steel, screw and union nut made of special alloy smooth running Mobile on castors Corners of the lid torn and partially re-welded Machine should be thoroughly cleaned before use Video about test run available

Filling and packaging lines for sausage products (or plant-based alternatives) in cans, consisting of:, 2 filling lines, Line 1: set up for 125 g - aluminum cans with a can diameter of 73 mm, Line output: approx. 150 cans / min., Line 2: set up for 200g/300g and 400g cans with a can diameter of 99mm., Output: approx. 70 cans / min., Sterilization:, The products were sterilized in full water autoclaves with rotation (5 available) that were overhauled by Trinitas Trading in 2017., 3 labeling and packaging lines:, The labeling and packaging line for 125 g cans consists of a Langguth hot melt labeling machine from 2016 and a virtually unused Wächter packaging system (leased system) from 2022., We will be happy to send you the complete list of all machines belonging to the lines upon request., The machines can also be purchased individually.

Clipping machine

Capacity: 300l, working positions: 0-40kg, 22° from horizontal, 40-260kg, tilted 45°, main drive gearbox type: RF 73DT 80N4 SEW (Siri 52/72/8BA), power: 0.75kW, design: B 5, rated current: 3.8/2.2A, position: KLK 90°, voltage: 220/380V, 50Hz, multi-range, speed: 21-1400/min, seal: Kaco Ø 50 high, D-seal: SV-full. Tilting gearbox type: KA76 TR42 DT71 D4 BM SEW, hollow shaft diameter: 50mm, power: 0.37kW, design: H 4A, rated current: 2.25/1.3A, position: KLK 0°, voltage: 220/380V, 50Hz, multi-range, speed: 1.6-1400/min, braking torque: 5Nm, brake voltage: 220V, rectifier: BG 1.5. With operating manual and documentation. An inspection on site is possible.

A Kilia bowl cutter is available. Knife shaft speed levels: 2, bowl speed levels: 2, bowl volume: 65l, knives: 6. The mixing cycles of the machine are non-functional. An on-site inspection is possible.

Stephan VM60 Vacuum Mixer used with push-button switch, according to the previous owner 20 minutes interval, 4x on, 4x off then must be switched on again Mixed insert made of stainless steel Machine for emptying and operation with low content tiltable Boiler volume: 72 litres Batch sizes: up to 60 litres the machine must be thoroughly cleaned before use, as there are protein deposits inside Dimensions: 84x58x120cm Video about test run available Mixing Tumbler, Tumbler, Vacuum Tumbler, Mixer, Mixing Machine, Mixing Machine

Rühle MKR130 Tumbler used Machine is completely made of stainless steel Mixing arm can be dismantled without tools via bayonet Mixing, batching and rumbling under vacuum and cooled Fully functional must be cleaned thoroughly before use, as protein deposits are present only the red wiper rubber is missing on the pile arm and the left side part was slashed (see photos) Video about test run available

Year of manufacture 2019, top condition, only approx. 300 hours Machine housing: solid stainless 2 rotation directions Emptying by hydraulic tilting of the mixing trough Membrane keyboard with plain text display in German Automatic mixing time preselection Control cabinet built-in, main switch Microprocessor Control (PLC) Mixing speed speed: infinitely variable Mixing tank: 500 litres Motor power 7.5 KW / voltage 400V / 50Hz Incl. MA 20 automatic mixing: for up to 20 programs (forward/backward/pause/total time and mixing speed speed) Incl. Z-mixing arms instead of paddle shafts Incl. protective grille: welded construction made of stainless steel, hydraulically operated Incl. 2 operating instructions with machine With mast feeding system BA24 Hydr., stainless, for standard wagons

Year of manufacture 2019, top condition, only approx. 300 hours Machine housing: solid stainless closed base plate Screw housing : stainless Working auger : stainless Feeder auger: stainless, horizontally extendable Lock nut: stainless Cutting device : included incl. cutting set for fresh meat and insertion rings Perforated disc diameter: 130 mm with main switch / 2 speed / push button Motor power: 12.5/15 KW / Voltage: 400V / 50Hz incl. the following additional equipment : +Safety cover for cutting set - +Separator device incl. SEP cutting set and Sep support cross with adjustment and discharge tube +Z-agitator: 1.5 KW (can only be used for FF), enlarged Hopper capacity approx. 355 I incl. machine elevation and safety step mech. Ejector (of the working screw) by means of lever on machine, microprocessor-controlled (PLC) Membrane keypad and control cabinet stainless st ...

3 x Maja ice cream machines SA 85+SA 170 for overhaul

Maja ice silo with built-in screw conveyor SA 21, incl. Bizerba floor scale, very good condition, capacity 2 to

Alpina-Clipper Model DK

Annpona Cutter PB 125-990, with Black Bowl, in Function

Franz Slicer for Strips 5 mm

Nimo feeding SKV 300, in very good condition, tipping height: 1,550 mm

WE sharp 7000, sharpening station for slicer knives, demo machine from exhibition

Vemag servo crimper in very good condition incl. accessories

Laska Bowl Cutter KU 80 litres, with black bowl, in function

Weber Derinder ASC 460, function tested

Treif Divider CE in good condition

Weber SSM, sharpening station for slicer knives

Inotec Sausage Cutter WT 97-R,

PolyClip FCA 3462, mechanically overhauled, frequency converter removed

Frozen meat slicer Magurit 152, Electrics and hydraulics completely overhauled, Connection 400V, 4kW, year of construction 1991, Dimensions LxWxH approx. 185x75x138cm, weight approx. 390kg, very good condition, fully functional