We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- Injection molding machines (375)
- Injection molding machines for rubber (1)
- Injection moulding devices (3)
- Machines used for injection moulding (2)
- Multi component injection moulding machines (8)
- PET Machines (13)
- PET Preforming machines (13)
- Plastic injection machines (145)
- Precision injection molding machines (3)
- Special injection moulding machines (9)
- Withdrawal devices (1)
- more
- ABB (1)
- ACOPOS (1)
- ANJI (1)
- APEX (1)
- Arburg (201)
- ARBURG 200T (1)
- ARBURG 320C (1)
- ARBURG 320T (1)
- ARBURG ALLROUNDER 920H (1)
- ARBURG ELECTRIQUE (1)
- ARBURG UND BOY (1)
- ARBURG/DEMAG/ENGEL (1)
- ARBURG/DEMAG/STüBBE (1)
- ARBURG/NETSTAL/DEMAG (1)
- Babyplast (2)
- BATTENFELD (33)
- BATTENFELD TM (1)
- BATTENFELD VM INSERT (1)
- BILLION (13)
- BMB (2)
- BOSCH (1)
- Boy (23)
- BOY E (1)
- BUSCH (1)
- Chen Hsong (2)
- CHENDE (1)
- CRONOPLAST (1)
- Demag (62)
- DEMAG ERGOTECH (3)
- DEMAG ERGOTECH 350T (1)
- DEMAG ERGOTECH EXTRA (1)
- DEMAG SYSTEC (1)
- Dr. Boy (7)
- DR.BOY (1)
- ENGEL (98)
- ENGEL DUO (1)
- ENGEL ES (1)
- ENGEL INSERT (1)
- Engel Victory (10)
- ERLHOFF (1)
- FANUC (9)
- FCS (4)
- Ferromatic (2)
- Ferromatik (6)
- FERROMATIK MILACRON (7)
- GEIGER (1)
- Haitian (16)
- HATIAN (1)
- HUARONG (1)
- HUSKY (28)
- HUSKY HMI (1)
- Husky Injection Systems (2)
- INTRON (1)
- ITALTECH (1)
- JONWAI (1)
- JSW (2)
- KAI MING (1)
- KLOECKNER DESMA (1)
- Krauss Maffei (70)
- KRAUSS MAFFEI CX (2)
- KRAUSS MAFFEI PX (1)
- Krauss mMaffei (2)
- KRAUSS-MAFFEI (3)
- KraussMaffei (2)
- KRAUSSMAFFEI 420T (1)
- LWB STEINL (1)
- MAINGROUP (1)
- Maplan (2)
- Milacron (2)
- MOOG (1)
- NEGRI BOSSI (8)
- NEGRI BOSSI CANBIO (1)
- NEGRI BOSSI SACMI (1)
- NEGRI BOSSI V (3)
- Netstal (8)
- NETSTAL-MASCHINEN (1)
- NIIGON (1)
- NPM (1)
- OIMA (1)
- PM (2)
- POLYMA DEUTZ (1)
- PONAR ZYWIEC (1)
- REAL (1)
- REINHARDT (1)
- REP (1)
- REXROTH (5)
- ROMI (1)
- RUTIL (4)
- SACMI (3)
- SANDRETTO (25)
- SANDRETTO MEGA (1)
- SANDRETTO NOVE (1)
- SANDRETTO NOVO S (1)
- SANDRETTO OTTO (1)
- SIDEL (1)
- SIPA (1)
- SM (1)
- SMITH (1)
- STORK (11)
- SUMITOMO / HAMATECH STEAG (1)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Manufacturer:
(Category: 301)
ABB 1
ACOPOS 1
ANJI 1
APEX 1
Arburg 201
BATTENFELD 33
BILLION 13
BMB 2
BOSCH 1
Boy 23
BOY E 1
BUSCH 1
CHENDE 1
Demag 62
Dr. Boy 7
DR.BOY 1
ENGEL 98
ENGEL ES 1
ERLHOFF 1
FANUC 9
FCS 4
GEIGER 1
Haitian 16
HATIAN 1
HUARONG 1
HUSKY 28
INTRON 1
ITALTECH 1
JONWAI 1
JSW 2
KAI MING 1
Maplan 2
Milacron 2
MOOG 1
Netstal 8
NIIGON 1
NPM 1
OIMA 1
PM 2
REAL 1
REP 1
REXROTH 5
ROMI 1
RUTIL 4
SACMI 3
SANDRETTO 25
SIDEL 1
SIPA 1
SM 1
SMITH 1
STORK 11
TEDERIC 2
TOYO 2
WINTEC 1
Key data: 500 kN
ARBURG ALLROUNDER CENTEX 320 C 500 – 250 (Year 2002) Serial number: 188161 – Machine no. 30 Clamping force: 500 kN Distance between tie bars: 320 x 320 mm Platen dimensions: 446 x 446 mm Injection unit (EUROMAP): 250 Approx. shot volume: 106 cm³ Shot weight (PS): 97 g Operating voltage: 400 V – 3 Ph – 50 Hz Heating capacity: 6.5 kW Pump motor: 1 x 15.00 kW Total connected load: 21.5 kW Machine weight: 2330 kg
Key data: 1000 kN
ARBURG ALLROUNDER SELECTA 470 S 1000 – 675 (Year 2001) Serial number: 187132 – Machine 8 Clamping force: 1000 kN Distance between tie bars: 470 x 470 mm Platen size: 637 x 637 mm Max. mould height: 750 mm Ejector force: 40 kN Ejector stroke: 175 mm Shot volume: 675 cm³ Operating voltage: 400 V – 3 Ph – 50 Hz Heating capacity: 14.9 kW Pump motor: 1 x 22.00 kW Total connected load: 36.9 kW Dimensions: 4180 x 1645 x h, 2140 mm. Machine weight: 5400 kg
Key data: 1500 kN, 40 mm
ARBURG ALLROUNDER 520 H 1500-400 (2015) Injection molding machine + WITTMANN ROBOT + Conveyor belt In operation Hours: 68946 h. Clamping force: 1500 kN Clamping unit 520 H Opening force / stroke: 450 mm. Fixed / variable mould mounting height: 250-550 mm. Fixed / variable platen spacing: 700-1000 mm. Column spacing: 520 x 520 mm Mold clamping platens (width x height) 695 x 695 mm. Weight of movable mould half: 1000 kg max. Force – Ejector stroke: 40 kN – 175 mm Idle cycle time: Conformt Min 1.5 – s- 364 Screw diameter: 40 mm. Effective screw length: 20 L/D Screw stroke: 160 mm. Calculated injection volume: 201 cm3 Weight per injection: 184 g. Ps. Material flow rate: 29 kg/h. PS Injection pressure: 2000 s-bar Post-pressure time: 45-2000 s-bar Injection flow: 214 cm3/s Injection speed: 170 mm/s Power – heating zones: 9.7 kW – 5 Oil capacity: 160 l. Weight ...
Clamping force 135 t, toggle clamping system with 4 tie bars, tie-bar spacing 400 × 400 mm, mold height 150–500 mm, opening stroke 400 mm, ejector stroke 150 mm, screw diameters 45/50/55 mm, injection volume 286–427 cm³, injection pressure 1210–1800 bar, 4 heating zones, installed power 31 kW, overall dimensions approx. 4,900 × 1,200 × 2,050 mm, weight approx. 5,000–5,700 kg. Machine No. 959.
Key data: 1500 kN
Clamping force: 150 t. Clamping type: Toggle system. Tie-bar spacing: 470 × 470 mm. Platen size: 700 × 700 mm. Mold height (min–max, approx.): 180–500 mm. Opening stroke: 420 mm. Ejector stroke: 130 mm. Injection volume: 320 cm³. Screw diameter: 42/45 mm (to be confirmed). Heating zones: 4. Machine dimensions: 5000 × 1400 × 2000 mm. Machine weight: 6000–7000 kg.
Key data: 800 kN
Clamping force: 80 t. Clamping type: Toggle system. Tie-bar spacing: 270 × 310 mm. Platen size: 310 × 310 mm. Mold height: 150–270 mm. Opening stroke (approx.): 310 mm. Ejector stroke: 70 mm. Screw diameter: 26 mm (to be confirmed), Injection volume: 124 cm³. Injection weight (PS): 60–103 g. L/D ratio: 19–22:1. Approx. machine dimensions: 3500 × 1200 × 1600 mm. Weight: 3000–4000 kg. Machine No.: 200000800292.
Key data: 1800 kN
Clamping force: 180 t; 4-column toggle system; tie-bar spacing: 480×480 mm; platen size: 720×720 mm; mold height: 150–550 mm; opening stroke: 396 mm; ejector stroke: 130 mm; screw diameter: 60 mm (to be confirmed); injection volume: 678 cm³; 4 heating zones; power supply: 3×380 V–50 Hz; installed power: 45.3 kW; machine dimensions: 5950×1400×1920 mm; weight: 6700 kg; Machine No.: ED1020.
Key data: 1280 kN
Clamping force: 128 t. Tie-bar spacing: 410 × 410 mm. Machine no. 13A350 Platen size: 650 × 652 mm. Mold height (min–max): 140–440 mm. Opening stroke: 360 mm. Ejector stroke: 95 mm. Ejector force: 4 t. Screw diameter: 42 / 47 / 53 mm. L/D ratio: 21.9 / 19.6 / 17.4 Diam. 42: 216 g. Diam.47: 271 g. Diam.53: 344 g. Injection volume: 235 / 295 / 375 cm3. Injection pressure: 2005 / 1600 / 1260 kg/cm2. Injection stroke: 170 mm. Screw rotation speed: 0–200 rpm. Machine dimensions (L × W × H): 5.0 × 1.2 × 1.88 m Machine weight: 4500 kg.
approved
dealer
dealer
Injection moulding machine for food and beverages caps
approved
dealer
dealer
Injection moulding machine for PET preforms
approved
dealer
dealer
Clamping Force: 300 ton // Shot Weight (Max): 476 g
approved
dealer
dealer
Clamping Force: 150 ton // Mould Height (Max): 730 mm
approved
dealer
dealer
Clamping Force: 200 ton
approved
dealer
dealer
Clamping Force: 350 ton // Shot Weight (Max): 694 g
approved
dealer
dealer
Injection moulding machine for food and beverages caps
approved
dealer
dealer
Injection moulding machine for PET preforms
approved
dealer
dealer
Clamping Force: 420 ton // Shot Weight (Max): 1555 g
approved
dealer
dealer
Injection moulding machine for PET preforms
approved
dealer
dealer
approved
dealer
dealer
Clamping Force: 1000 ton // Shot Weight (Max): 6995 g
approved
dealer
dealer
Clamping Force: 220 ton // Shot Weight (Max): 625 g
approved
dealer
dealer
Injector for Plastics. - 30 mm spindle - Laboratory sample mold - Engine: 10 hp (7.5 kw). - Electrical panel
approved
dealer
dealer
Sidel SBO 12 PET Stretch Blow Moulding machine. Sidel SBO 12 PET Stretch Blow Moulding machine The Sidel SBO 12 blow molding machine is a state-of-the-art bi-oriented PET blow molding machine designed to produce high-quality bottles for flat and carbonated beverages at a rate of up to 19,200 bottles per hour. Utilizing a cold process, this system offers excellent flexibility and optimized production. Key features include: Cold Preform Infeed: Preforms are automatically loaded and transferred through a reheating system, ensuring precise temperature control. Efficient Heating & Blowing: Preforms are heated and blown into bottles through two-stage high-pressure air blowing for uniform wall thickness. Advanced Molding System: With automatic ejection for defective preforms, the SBO 12 ensures consistent bottle quality, while synchronized cams optimize the entire manufacturing pr ...
approved
dealer
dealer
Used machine in good condition. Available for immediate delivery. - Screw diameter: 45 mm - Shot weight max: 469 g - Injection rate: 255 cm?/s - Injection pressure: 2.050 bar - Injection volume: 510 cm? - Screw speed: 230 rpm - Screw L/D ratio: 24 - Clamping force: 4.000 kN - Mould opening stroke max: 950 mm - Mould height min: 350 mm - Daylight between platens max: 1.450 mm - Heating zones: 24 - Cascades / Sequential valve gates: 12 - Platen size h: 1.200 mm - Platen size v: 1.1100 mm - Air Valves: 2/2 - Ejector force: 96 kN - Control: CC200 - Core pulls: 2 - Oil tank capacity: 955 l - Power: installed max: 45 kW - Weight: 22.300 kg - Dimensions (long x wide x high): 7.100 x 2.200 x 2.300 mm
approved
dealer
dealer
Used machine in good condition. Available for immediate delivery. - Screw diameter: 40 mm - Injection pressure: 1.211 bar - Injection volume: 201 cm? - Clamping force: 700 kN - Platen size (h x v): 590 x 340 mm - Dimensions (long x wide x high): 3.370 x 3.580 x 2.640 mm - Weight: 7.500 kg
approved
dealer
dealer
Used machine in good condition. Available for immediate delivery.
approved
dealer
dealer
SPECIAL OFFER for renovation of warehouse space - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Screw speed: 360 rpm - Screw speed: 360 rpm - Screw L/D ratio: 16,4 - Nozzle stroke / force max.: 200 / 28 mm / kN - Clamping force: 280 kN - Platen size (h x v): 500 x 450 mm - Oil tank capacity: 115 l - Operating hours: 102.273 - Dimensions (long x wide x high): 3.300 x 1.200 x 1.800 mm
approved
dealer
dealer
Used machine in good condition. Available for immediate delivery. - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Screw speed: 360 rpm - Screw speed: 360 rpm - Screw L/D ratio: 16,4 - Nozzle stroke / force max.: 200 / 28 mm / kN - Clamping force: 280 kN - Platen size (h x v): 500 x 450 mm - Oil tank capacity: 115 l - Operating hours: 101.636 - Dimensions (long x wide x high): 3.300 x 1.200 x 1.800 mm
approved
dealer
dealer
SPECIAL OFFER for renovation of warehouse space - Screw diameter: 25 mm - Injection rate: 109 cm?/s - Injection pressure: 2.400 / 2.000 bar - Injection volume: 59 cm? - Screw speed: 400 rpm - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 250 / 40,6 mm / kN - Ejector stroke / force max.: 100 / 40 mm / kN - Clamping force: 500 kN - Mould opening stroke max: 400 mm - Mould height max: 200 mm - Daylight between platens max: 600 mm - Heating zones: 4 - Platen size (h x v): 500 x 450 mm - Control: CC200 - Oil tank capacity: 135 l - Operating hours: 104.550 - Power: installed max: 5,45 + 7,5 kW - Dimensions (long x wide x high): 4.000 x 1.400 x 2.000 mm - Weight: 4.000 kg
approved
dealer
dealer
Including YUSHIN 5 axis servo robot - 21.5 HD Touch screen display - 23 languages - selectable - 10 stages of injection pressure & speed control - 6 stages of closing & 5 stages of opening via speed & position control - auto acceleration control - 10 stages of ejector control, 2 stage ejector and 4 patterns of ejector motion control - Simultaneous Ejector forward with clamp opening - Simultaneous clamp open and plasticising - Screw diameter: 20 mm - Injection volume: 24 cm? - Platen size h: 500 mm - Platen size v: 470 mm - Distance between tie-bars (h x v): 360 x 320 mm - Ejector force: 5 / 20 (2.0tonf) / 70 kN - Power: installed max: 15.7 kW - Operating hours: 10.600 - Weight: 2.900 kg
