Karl Mengele & Sons, Type: 113930 • Permissible gross weight: 7,100 kg, two-axle turntable trailer • Hydraulic two-way tilt function, tested and fully functional • Robust steel frame, repainted in original red • Wooden side walls stable, foldable, no breaks, with new locks • Steel floor in very good condition – no rust, no breakthroughs • Tyres renewed – coarse tread, very good condition • Hydraulic lines tight, all movements clean • Full lighting – operation on public roads (25 km/h) possible • Incl. triangle warning signs and reflectors at the rear • Nameplate original available • Dimensions loading area (estimated): approx. 4.00 m × 2.10 m × 0.50 m • Capacity approx. 6–7 m³, ideal for bulk materials, wood or bale transport • Support wheel and drawbar mount stable, immediately ready for use • Includes electro-hydraulic tippin ...

Working traction Axles can pull along Auction-ID: A3-46167-11011

Fully demountable to flat wagon, grain scraper, double rear door, hydraulic support leg Auction-ID: A3-46165-467

Auction-ID: A3-46167-11001

measured without dessel; height 110cm ; corrosion but chassis is okay; works Auction-ID: A3-46167-10003

Equipped with: Veenhuis agricultural tipper 10 tons, type: 8000, year of construction: 1987, serial number: 2588, tandem axle version, hydraulic tipping system, hydraulic brakes, hydraulic support leg, French rear panel with grain scraper, attachment plates available, Dutch registration available, lighting available, length: approx. 6.3 m, width: approx. 2.4 m, height: approx. 2.3 m (incl. attachment signs) Auction-ID: A1-47380-275

Equipped with: hydraulic support leg, air brakes, control box, Belgian papers, hydraulic tailgate, rear bumper, drawbar coupling with air brake connection, work lighting, twist locks on chassis, thistle suspension, BPW axles, Tridec suspension Auction-ID: A1-47380-57

Equipped with: support legs, 2 axles, hydraulic tipping function, Meiller 2-axle steel tipping trailer, air suspension, saf axles, air braked, Auction-ID: A1-47380-202

Equipped with ring tow bar; box size 3600x2200x900 mm (LxWxH) including loose wheel; Auction-ID: A1-47380-276

Meiller tipper semi-trailer – 25 m³ – Year 2007 Meiller steel tipper semi-trailer, put on the road in 2007, with a capacity of 25 m³. Intended for the transport of bulk materials such as earth, sand, rubble, cereals or agricultural products. Equipped with a mechanical door hook and a hand-cranked tarpaulin net. The tipper is in good general condition with normal traces of professional use. A few points of surface corrosion are visible on the upper edges and some metal parts, without any apparent significant deformation of the body. Recent work has been carried out to ensure proper operation: 4 new tyres; 6 new air suspension bags; LED taillights. The semi-trailer is in order of technical inspection. Features: Brand: Meiller Type: Dump semi-trailer Year: 2007 Capacity: 25 m³ 3 axles Mechanical Door Hook Tarpaulin net with crank 4 new tyres 6 new air cushions LED lights Valid techni ...

Drum screening plant, screening machine, drum screen, sorting plant, vibrating screen, vibratory screen, vibrator, sorting system, classifier, control screening machine, analytical screening machine, separation plant -Manufacturer: Horstkötter -Type: Drum cleaner TTR630 -Sieve: Ø 700 x 1060 mm -Sieve inclination: adjustable -Drive: 0.37 kW 35 rpm -Dimensions: 1600/1300/H2130 mm -Weight: 414 kg

Joint cutter, diesel joint cutter, asphalt cutter -Saw blades: 2 -Saw blade diameter: 500 mm -Cutting depth: approx. 180 mm -Working width: 425 mm -Hatz diesel engine: 25 kW -E-Start -infinitely variable feed

Power trowel, concrete trowel, screed trowel, concrete troweling machine, power trowel -Manufacturer: Noggerath, Hand-operated concrete power trowel type G 850 E -Power: 2.4/1.5 kW / 2820/1425 rpm -Plate diameter: 900 mm -Transport dimensions: 1550/1000/H1130 mm -Weight: 88 kg

Slab cutter, paving stone cutter, stone cutter, paving stone cutter -for effortless cutting of slabs and paving stones to length through the translation of the eccentric lever -High stability with low weight -precise guidance of the cutting blades -Pendulum-mounted upper blade for cutting materials with a conical cross-section (curbstones) -max. for 6 cm stones -Weight: 10 kg

- Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Cable length: approx. 6m -Weight: 150 kg

Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of shaker bottles: 1 piece -Cable length: approx. 6 m -Weight: 72 kg -Functionally tested

Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of vibrating bottles: 1 -Cable length: approx. 6 m -Weight: 105 kg

Slab cutter, paving stone cutter, stone cutter, paving stone cutter -for effortless cutting of slabs and paving stones to length through the translation of the eccentric lever -High stability with low weight - precise guidance of the cutting blades -Pendulum-mounted upper blade for cutting materials with a conical cross-section (curbstones) -Working length: 500 mm -Weight: 100 kg

- Converter for bottle vibrators, vibrating bottles, internal vibrators -Engine: Hatz diesel -Frequency converter: -Vibration bottles: 2 pieces 1x vibrating bottle Ø 60 x 450 mm 1x vibrating bottle Ø 50 x 450 mm -Cable length: 6 m each -Dimensions: 1550/800/H1150 mm -Weight: 220 kg

Converters for bottle vibrators, vibrating bottles, internal vibrators, concrete vibrators -Manufacturer: Wacker -Handover: as is as seen -Carriage: Impeller damaged, see photo -Motor: 2 kW -Vibrating bottle: length 430 mm -Hose length: 6 m -Dimensions: 1380/580/H600 mm -Weight: 87 kg

Power trowel, concrete trowel, screed trowel, concrete trowel, power trowel-Manufacturer: Noggerath, hand-held concrete smoothing machine type G 700 E-E-motor: 2.0 / 1.35 kW-Plate diameter: 700 mm-Transport dimensions: 1040/780/H1300 mm-Weight: 69 kg

Power trowel, concrete trowel, screed trowel, concrete trowel, power trowel-Manufacturer: Noggerath, hand-held concrete smoothing machine type G 950 E-Power: 2.4 kW-Plate diameter: 790 mm-Transport dimensions: 1190/1000 / H1410 mm-Weight: 87 kg

Metal detector for conveyor belts, all-metal detection system, tunnel metal detector -Manufacturer: SS Temafa, Metal Detector All-Metal Detection System -Metal detector: SS TFX 4000/440 -Detector opening: Ø 440 x 530 mm -Control: Temafa MSG 4-FF -Individual components: see photos -Dimensions: 750/530/H790 mm -Weight: 96 kg

Frequency converter, frequency transformer, converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Power: 5 kW -Output: 42 V -Frequency: 200 Hz -Dimensions: 1160/600/H740 mm -Weight: 88 kg

Frequency converters, frequency converters, converters for bottle vibrators, vibrating bottles, internal vibrators-Frequency converter-Power: 2.8 kW-Output: 42 V-Frequency: 200 Hz-Dimensions: 1160/600/H720 mm-Weight: 74 kg

Joint cutter, asphalt cutter, concrete cutter -Saw blade: Ø 360 mm -Cutting depth: 120 mm -Engine: Robin EH25D 8 hp -Dimensions: 1200/500/H950 mm -Weight: 100 kg

Screed, vibrating screed, concrete trowel -electrically powered -Connection: 230 volts -Working width: 1500 mm -Dimensions: 1500/350/H450 mm -Weight: 17 kg

Joint cutter, asphalt cutter, concrete cutter -Manufacturer: Cedima, joint cutter type CF 16.1D -Saw blade: Ø max. 480 mm -Engine: Hatz E 780U 7 kW -Dimensions: 1150/680/H920 mm -Weight: 250 kg

Power trowel, concrete trowel, screed trowel, concrete trowel, power trowel-Manufacturer: Noggerath, hand-held concrete smoothing machine type G 900 E-Power: 1.5 / 1.8 kW 1400/2850 rpm-Plate diameter: 835 mm-Transport dimensions: 1200/1000 / H1260 mm-Weight: 81 kg

circular vibrating screening plant, screening machine, vibrating screen, vibrating screen, vibration motor, shaker, sorting system, shaking system, sifter, control screening machine, analysis screening machine -Manufacturer: Siebtechnik, control sieving machine Elekto-Schnellsieb with 15 sieve inserts -Type: Perflux for the production of grinding wheels -Sieve inserts: size 42 my to 250 my, see photo parts list -Screening machine: Dimensions 1530/1000/H2130 mm -Transport dimensions: 1600/1300/H2130 mm -Weight: 414 kg