shrinking machines used for sale (267)

Pester Pewo Pack 450 with shrink tunnel further information on request

Shrink tunnel from a German manufacturer: -Tunnel opening approx. 500 x 200 mm. -Temperature adjustable up to 250 degrees and transport speed up to 25 m/min. -Choice of fixed or center-rotating tunnel bars. -The hot air flows can be adjusted separately at the top and centre via deflectors. -Ground air at the bottom can be switched on separately. -The machine can be pushed or fixed by means of lockable castors.

Packaging machine from a reputable manufacturer. For example, suitable for packaging food (bakery products, bread, cakes, chocolates), bottles, household goods, toys, technical articles, printing and paper products, cosmetics and textiles. -Display with adjustment options for welding time, shrink time and shrink temperature. - Maximum package size approximately: length 700 x width 600 x height 250 mm. -Perforation possible via two adjustable needle rings. -Equipped with 2 electric holding magnets for the hood. -2 fans to distribute the hot air. -Roller holder movable. -Adjustable product slot. -Machine can be moved with castors. The machine can be demonstrated under electricity.

Pester PEWO-pack 800 shrink packer für bottles/aerosol cans, right-angled infeed belt with grouping station, sealing width max. 800 mm, product infeed width max. 850 mm, product infeed length max. 350 mm, product infeed height max. 250 mm, capacity up to 25 collations per minute, electrics 400V/50-60Hz, power consumption 16.8 kW, operating pressure 5 bar, machine net weight approx. 700 kg, previously used for packing aerosol cans

Offer Welding machine - Hood shrinker Torre Minipack FM 76 Digit The machine is sold due to a business change at our customer's premises. It is operational and has been little used and put into storage in 2020. The Torre Minipack FM 76 Digit Welding and Shrinking Machine Welding and Shrinking Machine - Hood Shrinker is a compact welding and shrinking machine for very good packaging performance, It is quick to work and easy to use. Particularly suitable for small and medium quantities of up to 300 pieces of film packaging per hour. Not all information and data are available yet. These will be added soon. Technical data (partly from the network) Manufacturer: MINIPACK -TORRE S.p.A Type: FM76A DIGIT No. 003001 Year built:2002 Operating hours: little Packaging capacity: 300 pieces of film packaging per hour. Welding frame dimensions: 52 x 38 cm max product height: 26 ...

Fabr: Kuper Machine type: ST/I-1200 Machine number: 7560 Year: 1991 Power: approx. 51kW Working width: 1200mm PROVIDER

Very well maintained shrink tunnel , 400 V, 13 KW

Shrink tunnel BVM SC 4030 SD; good condition; cleaned and tested; new chains and sprockets in 2022; Passage width 400mm; Passage height 300mm; Speed max. 14m/min.; Double chamber. Shrink tunnel BVM SC 4030 SD; good condition; cleaned and checked; in 2022 new chain and chain wheels; working width 400mm; working hight 300mm; spedd up to 14m/min.; double unit.

Pallet shrink machine with shrink hoods that descends and completely covers the pallet during the shrinking process. Energy sources: natural gas or liquefied petroleum gas and electrically powered. Function: Driven curtain to close the shrink bell opening Pallet base plate with integrated breather and ramp for Loading by means of a hand pallet truck Catalytic heaters ( No free flame ) Maximum power 13 Kw/hour Max pallet dimensions (standard version) length 1,200; Width 1.200 Height 1,500 mm Number of cycles up to 25 pallets/hour Automatic shrinking process with adjustable shrinkage time Preheating time approx. 30 minutes Operating temperature approx. 200°C - 220°C depending on film thickness

composed of: Belt infeed belt: • Type: FAG 500-1500 • Width 500 mm • Barrel length 1,500 mm • Speed approx. 25m/min • Working height 850+-50 mm • Power approx. 0.5 kW Film welding machine: • Type: SWS 5020 • Machine size (LxWxH): 2103 x 15653 x 1410 mm • Max product size (lxW): unlimited x max 480 mm • Welding punch width: 500 mm • Passage height: 220 mm • Conveyor belt speed: 35m/min • Film width: max. 650/650 mm • Film diameter max 300 mm • Connection 16A connector, 3ph 380 V • Transverse welding servo motor • Longitudinal welding pneumatic • Working height 850 mm Shrink tunnel: • Type: STA-45 30 • Dimensions: 1.840L x 1080 W x 1250 H mm • Tunnel opening: 1200 L X 450 W X 300 H mm • Product size max: 1700 L x 400 W x 250 H mm • Conveyor belt speed 10-40/min • Weight 520 kg • Working height 850 mm • C ...

Thermo shrink tunnel BECK type HV 601HPLS - Used equipment built in 2008 The high-performance shrink tunnel is built in an energy-saving design. He is from the The heating system and the adjustment options are designed so variably that they can be covered with foil. coated products of various contours can be shrunk cleanly. Functioning: The thermal shrink tunnel works with separate blowers to create a separately adjustable top and bottom heat. The special insulation technology reduces heat loss by radiating heat, reduces the power consumption by up to 20% and thus increases the Efficiency of the machine considerably. The shrink temperature is controlled by a digital control and precisely maintained even at high throughputs. The heating units at the top and bottom are removable; the thermal shrink tunnel is in case of maintenance available again after a few minutes. The ...

Beck Series Packer SX 1750

Specifications: Passage width: 400 mm Passage height: 150 mm standard, the passage height can be changed by using additional strips Hood length: 1,700 mm Transport length: 2100 mm Transport rod spacing: every 4th rivet occupied Teflon net coating for products with a small footprint Current type: 230/400 Volt three-phase current N-PE Heating power: controlled by solid stat. relay Power: 19 kW Throughput speed: infinitely variable Color: Hammer blow aluminum No guarantee is assumed for the technical data given in the description.

Packaging machine Beck Fitpacker Junior FJ 1040 U - Used equipment built in 1995 - small repairs necessary The Fitpacker Junior has a high packing performance and can process products of different lengths in disorder. A programmable logic controller is located at the top of the control cabinet and is easy to handle via a logical user interface. The packer also has a feeding system, which is especially suitable for line operation. Machine changeover times are kept short by a digital operating concept and an adjustable shape shoulder. The control cabinet can be opened and swivelled so that optimal access is guaranteed in the event of maintenance and downtimes are reduced. The film roll holder is mounted at an ergonomically reasonable working height. Working speed: Actual production speed and effective net output depend on format, Type and composition of products and can ...

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 Year 2006 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Control: Siemens S7-300 - Operating terminal with Siemens touch panel - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel knife system - Processable films PE and PO - Year of construction 2006 - Kallfass Compact 450 SO shrink tunnel - Gripper section with inline belt - Book magazine on gripper section - Ionization for blocking loose leaves - Cur ...

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 NT Year of construction 2003 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Side sweat monitoring - Foil holding plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable welding strip - Side welding wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Shrink tunnel Kallfass Standard - Gripper section with inline belt - Curved band can be ...

small shrink line for sale consisting of vacuum chamber machine C 30 and shrink tank ST 40/60 - both mobile C 30 New machine - ST 40/60 overhauled 2022

Steam shrinkage tunnel incl. steam generator (without transport conveyor)

Properties: Used foil welding machine of the manufacturer Italdibipack Angle welder with shrink tunnel Condition: fully functional with signs of use Ideal for fast material transport Expertly dismantled and packaged Specifications: Total length: 2,200 mm Total width: 850 mm Total height: 1.500mm Shrink tunnel length: approx. 700mm Working height: 930mm film width: 600mm Weight machine: 270Kg Rated power: 5Kw Year of construction: 2012 Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt tracks, inclined conveyors or telescopes for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of professional ...

HugoBeck films packing machine with shrink tunnel - Year of construction 2015 - approx. 81,000 operating hours (total) - The following items have been packed: Item size: 150 x 80 x 240mm – these in one pack 4 rows x 9 individual bottles with the dimension 730 x 600 x 245mm HugoBeck automatic film packing machine with shrink tunnel - Year of construction 2015 - approx. 81,000 operating hours (total) - The following items were packet: Item size: 150 x 80 x 240mm - these in a pack of 4 rows x 9 individual bottles with the dimensions 730 x 600 x 245mm Envasadora automática de film HugoBeck con túnel retráctil - Año de construcción 2015 - Aprox.81.000 horas de funcionamiento (total) - Los siguientes artículos fueron embalados: Tamaño del artículo: 150 x 80 x 240mm - estos en un paquete de 4 filas x 9 botellas individuales con las dimensiones 730 x 600 x 245mm

Passage height 220 mm Belt inlet 500 mm width Dimensions 1800 x 1150 x 1200 mm

composed of: Cellophanizer Shrink tunnel Conveyor belt and carton reseeers good condition

Second-hand machine type Pester Pewo pack 450 Pester PEWO-Pack 450, built in 2003 only 2700h operating hours For tightening insulating individual and collective containers with PE film in the pharmaceutical cosmetics and food industry The technically high-quality series equipment includes: - compact and stable design in modular design - Control console with 4-line plain text display for the following, piece counter, speed display, hour counter, temperature monitoring, general fault indicator - Wear-free, infinitely adjustable, patented tightening system - Product protection by means of safety monitoring by means of light barriers in the closing area - Film monitoring, advance warning with optical and acoustic display as well as machine stop at the end of the film or film tear - Single aeration - Machine mobile, i.e. it has steering and buck rollers for internal transport, ...

Pester Pewo pack 450 compact

Shrink Tunnel Kallfass Standard 450 N; State as is; checked only for function; Inlet width 400mm; Pass-through height 200mm; Cooling fan. Shrink tunnel Kallfass Standard 450 N; condition as is; only chekced on function; width 400mm; hight 200mm; cooling unit.

Thank you for your interest in our used machines, which we can offer you as follows: Manufacturer: SME Group Model: FM 5540 shrink wrapping machine Built: 2010, hardly used Max Package Dimensions: 450x330x150mm Machinery Dimensions: 1685x828x1480mm Max welding dimensions 550x450x120mm Weight: 125kg Electrics: 1pH 110V/220V 50/60Hz, 2.5kw Foil: PVC, PP and POF We offer this machine " in existing condition " for sale, excluding any warranty/defect claims or assurances. from the hess. Lichtenau; Unpacked

Graham Radiant Heat Shrink Sleeve Tunnel Tunnel Type: Radiant Electrical: 400 VAC, 3 Phase, 26 Amps Weight: 150kg Conveyor Height min/max: 900 mm/1000 mm Container Height min/max: 50 mm/300 mm Container Diameter min/max: 20 mm/150 mm -Individually controlled radiant heating elements -Polished interior surfaces to maximize heat/radiation reflection -Modular design -Double skin insulated stainless steel construction -Can preheat containers or shrink material after application -Designed to be used over an existing conveyor -Fully controlled internal environment to reduce running costs

Electric shrink tunnel 12 Electric thermal tube Electrical: 3 Phase, 24 kWt Weight: 420kg - 3-step heat isolation design for energy saving and operator protection. - Digital control, internal circulation keeps temperature consistent and shrinking effect perfect. - Equipped with high-level VFD(Variable Frequency Drive) that makes controlling of wind speed easy. - Unique wind board design makes controlling of wind direction easy and flexible, able to adapt to different bottles. - Durable electric heater tube ensures efficient heating. - Panel is embedded to prevent operators changing setting accidentally. - Heating can be stopped immediately, or maintained by time

for cellophanizing of chocolate boxes top condition Siemens PLC with 2 adjustable folding fittings 2 machines available, price is per piece

AC Automation LC800 semi-automatic L-sealer and shrink tunnel, belt width approx. 350mm, tunnel entrance approx. 350 x 180mm, sealing bar approx 500 x 400mm (L x W). Floorspace 2600 x 1000mm x 1400mm H