saws used for sale (1,291)

Execution semiautomatic 90° diameter: 600 800 x 600 mm Engine: 14,5 kW Blade: 9000 x 67 x 1, 6 mm Min. diameter: 10 mm Working height: 630 mm Weight: 4.3 to.

Technical data: Saw blade diameter: 520mm Mitre: 90° / 45° / 30° Drive capacity: 1.6 / 2.8 kW Dimensions: WxDxH 1520x1520x1560mm Working height: 900 mm Weight: 1250kg

Inv. Num. : 8951 Type: TDC 622 EDGE MASTER Producer: MECAL Created: 2023 Parameters: Maximum sawing speed: 2400 1/min Cutting length: max. 6000 mm Engine power: 13.5 kW Machine weight: 3200 kg

Inv. Num. : 8811 Type: DG 104 Producer: ELUMATEC Created: 1990 Parameters: Control unit: E 200

Max. diameter of the cut material ... 200mm Main engine power... 2.2kW Machine weight ... 170kg

Inv. Num. : 8283 Type: KKS 450 H Producer: Kaltenbach Created: 2019 Parameters: Cutting range: 150 mm Wheel diameter: 450 mm Length: 1320 mm Width: 1020 mm Height: 2000 mm Weight: 1050 kg

Inv. Num. : 7318 Type: PSU 450 Producer: Behringer Created: 2006 Parameters: Wheel diameter: 450 mm Weight: 1150 kg Equipment: 4x Spare Disc

Inv. Num. : 7179 Type: BS 740 RS3 Producer: FELDER Created: 2021 Parameters: Machine width: 860 mm Machine length: 1100 mm Machine weight: 500 kg Cutting height: 450 mm Saw blade length: 5365 mm Equipment: Automatic workpiece feeding

Amada CM II 100 DGYear of manuf. : 2022 ____________Description:Material:Round material:Ø 20 -101.6 mmRectangular material:20 - 80 mmCut length:10 - 6,000 mmSaw blade:Design:Disposable carbide saw bladesDimensions:Ø 360 x 2.0 mmSaw:Cutting speed:automatic controlRevolutions:55- 180Feed rate:0 -30 mm/secDrive power:11 kW x 4PHorizontal clamping pressure:15.2 kNVertical clamping pressure:3.9 kNFeed system:Drive system:AC servo + ball screwFeed length:715 mmFeed speed:30 m/minBar loader:Max. diameter:100 mmStandard length:6,500 mmMagazine extension:By 2,000 mmSorting section:With 2 switchesEquipment:Material feed:Bar feederChip disposal:Chip conveyorEmulsion mist separator:Air Champion

New machine SPECIAL PRICE incl.:- Starter Kit 2- Micro spraying deviceReady for demonstration in our exhibition Roller conveyors shown optional Fully automatic hydropneumatics· Mitre left/right· Head oblique cuts up to 45° (Schifter) a. b.· Pneumatic Vertical Clamping Device· Clamping vice before and after the saw blade Saw blade diameter 350 mmCutting range at 90 degrees: around 120 mmCutting range at 90 degrees: square 110 mmCutting range at 90 degrees: flat 200x88 mmCutting area at 45 degrees: around 115 mmCutting area at 45 degrees: square 110 mmCutting range at 45 degrees: square 150x80 mmTotal power requirement 1.5/1.8 kWMachine weight approx. 0.59 tDimensions L x W x H 1.1 x 0.95 x 1.7 m

A total of 3 units, 2x2 pieces with the dimensions: 2500x550x750 and 1x 3000x550x750

Technical data (Velox II / III) Saw blade diameter: 300 mm to 350 mm. Speeds: Very high (typically approx. 1,700 / 3,400 rpm), as it is designed for non-ferrous metals. Cutting range (90° round): approx. 100 mm to 120 mm. Cutting area (90° flat): approx. 180 x 50 mm to 200 x 80 mm. Mitre: Can be swivelled on both sides (usually 45° - 90° - 45°), often with fixed stops. Motor power: approx. 1.5 kW to 2.2 kW.Roller tracks approx. 4000mm

Wood band sawThanks to the heavy cast-iron table, the wood band saw offers good stability.The machine has a longitudinal guide and a mitre guide and is supplied with a saw blade. Roller diameter 400 mmCutting height 200 mmCutting width 350 mmMotor power 1.5 kWTable size 400 x 500 mmTable tilt 45 degreesSaw blade length 2950 mm Condition: never used / new (5)

Powerful and particularly robust metal band saw with aluminium die-cast saw table and infinitely variable cutting speed for mitre cuts up to 60° Cutting range at 90 degrees: around 130 mmCutting range at 90 degrees: square 130 mmCutting range at 90 degrees: rectangular 130 x 125 Saw blade dimensions 1440 x 13 x 0.65 mmDimensions L x W x H 350 x 690 x 520 mBelt speed 30 - 80 m/minTotal power requirement 1.2 kWMachine weight approx. 19 kg Condition: never used / new (5)

Berg & Schmid GBS 230/60 – Semi-automatic metal band saw – built in 1995 For sale is a robust and proven metal band saw from the German manufacturer Berg & Schmid, model GBS 230/60 in a semi-automatic design. The machine is ideal for precise cuts in steel, tubes, profiles and solid material. Thanks to the semi-automatic feed with hydraulic lowering and pneumatic vice, an efficient and repeatable workflow is possible. Technical data • 400 V three-phase current • Year of manufacture: 1995 • Semi-automatic operation • Pneumatic vise • Hydraulic feed control • Coolant device • Saw blade: approx. 2775 × 27 × 0.9 mm The machine is in used condition with signs of wear, soiling and corrosion. Solid and heavy industrial design – ideal for workshops, locksmiths or metal construction.

Mounting band saw:Cutting range at 90 degrees: around 125 mmCutting range at 90 degrees: square 125 mmCutting range at 90 degrees: rectangular 127 x 125 mmSaw blade dimensions 1435 x 12.7 x 0.6 mmBelt speed 38 - 80 m/minTotal power requirement 0.95 kWMachine weight approx. 18 kgDimensions L x W x H 720 x 380 x 450 m Condition: never used / new (5)

Hydr. hacksaw with:- Coolant device- Emergency stop deviceCutting diameter 320 mmSaw blade length 535 x 40 x 2.0 mmCutting range at 90 degrees: square 300 mmCutting range at 90 degrees: flat mmStroke rate 45 - 62 - 90 - 125 stroke/minTotal power requirement 3.0 kWMachine weight approx. 0.35 KgDimensions L x W x H 1.4 x 1.4 x 1.2 m

Band saw with- Ideal welding machine- Belt grinder- Table tiltable -15° to +45°- Pneumatic height adjustmentRoller diameter 400mm Projection 900 mmWorkpiece height 400 mmTable size 700 x 660 mmSaw blade length 4630 mmSpeed 45 - 500 m/minSaw band width max. mmTotal power requirement 1.5 kWMachine weight approx. 0.8 tDimensions LxWxH 1.95 x 0.9 x 2.25 0

Cold circular saw with:Saw blade diameter max. 350 mmCutting range: round 110 mmCutting range: square 100 mm2 saw blade speeds Machine weight approx. 0.65 tDimensions approx. 0.8 x 1.0 x 1.85 m Condition: untested (6)

Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...

Portable and removable metal band saw HBM 1100 WattThis mobile band saw can also be used without a stand. Special features The powerful mobile band saw machine with 1100 watt motor can also be used separately for materials up to 127 x 127 mm. Includes 2 saw blades, work table and integrated LED lighting. Saw blade length 1140 mm with adjustable variable handle. Lightweight and handy. Ideal for universal construction work, for assembly, in the workshop or for private use. Saw size 1140 x 13 x 0.65 mm.Maximum cutting capacity 127 x 127 mmCutting speed 144 m/min.Voltage 230 volts.Motor power 1100 watts. Package sizes 50 x 30 x 39 cm.Weight 15 kg. Condition: never used / new (5)

Band saw with- swivelling table- foot switch- machine light- IDEAL welding deviceRoller diameter 500 mmProjection 490 mmWorkpiece height 220 mmTable size 600 x 600 mmSaw blade length 3350 mmSpeed infinitely variableMachine weight approx. 0.4 tDimensions approx. 1.2 x 0.8 x 1.95 m Condition: untested (6)

Semi-automatic long-cut cold circular saw:- with mitre adjustment left 50°, right 60°- digital cutting angle display- feed speed hydraulically controllable- hydraulic workpiece clamping- 4 pcs replacement saw bladessaw blade diameter 510 mmcutting diameter 150 mmcutting range at 90 degrees: flat 450 x 150 mmcutting range at 90 degrees: square 150 mmspeed 29 / 58 m/min.Total power requirement 4.2 kWWeight 1.55 tDimensions L-W-H 1.8 x 1.7 x 1.7 mm

Miter range: 90°/30°, saw band inclination: 2°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: 3350mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 2000mm/1650mm/1850mm, weight: approx. 650kg. An on-site inspection is possible.

Offer 26014 Technical data: - Automatic workflow cutting process, hydr. Lifting / lowering - of the saw frame, mitre adjustment with hydr. Clamping - Automatic material replenishment machine, mot. Mitre adjustment - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely adjustable 15 - 150 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range 30° - 90° - at 90° around 335 mm - Square flat 500 x 335 mm - at 45° around 330 mm - Square standing 320 x 335 mm - at 30° square standing 170 x 335 mm - Material replenishment machine - Discharge roller conveyor 4000 mm - Feed roller conveyor 4000 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 2300 x H 1750 x D 2200 mm - Weight approx. 1800 kg

Key data: 500 mm

The Double mitre saw Manufacturer: Rapid Maschinenbau Type: DGL 220 S/N: 007501159 Year of Make: 2021 Tool size: max. 500 mm Weight: 1500 kg Working pressure: 6 bar Control cabinet with control panel, touchscreen version mobile single-bag dust extraction Höcker Polytechnik Gr 3, Year of manufacture: 2020, Suction nozzle diameter: 160 mm, Engine power: 2.2 kW is part of the ONLINE AUCTION of the Operating and office equipment of a window construction company   approx. 400 positions best. e.g. from: Hegla Maschinenbau GmbH & Co. KG LPLF Q15F, processing line for plastic profiles for window frames and frames Schirmer Maschinen GmbH, sash/frame assembly line Urban GmbH & Co. Maschinenbau KG, semi-automatic hardware assembly line Urban GmbH & Co. Maschinenbau KG, glass assembly line, glazing bead assembly line Urban GmbH & Co. Maschinenbau KG, manual vertical hard ...