pharmaceuticals and cosmetics machines used for sale (362)

Test chamber for stability tests Manufacturer: Vötsch Type VP 1300 Pharma For investigations of the shelf life of medicines. The test systems of the VP series have been specially developed for the requirements of laboratories according to the ICH guidelines Test room volume: 1300 l Temperature test: +10 °C to +50 °C, +5 °C to 60 °C Climate test: +10 °C to 50 °C Nominal power 2.7 kW Humidity range: 20% to 90% RH Weight 250kg Documents available

Laboratory homogenizer mixer Manufacturer: Becomix Type: RW 2.5 Usable volume 2.5 liters Technical specifications : Vacuum homogenizing system Mobile table version Usable space: Operating temperature 100 °C Pressure -1/+1 bar, vacuum-resistant Capacity 5 litres Boiler room: Operating temperature 110 °C Pressure 4 bar Power 4.8 kW Content 2 litres Equipment: Agitator with wall scraper 20-160 rpm Left-hand rotation/counterclockwise rotation and alternating left-right rotation Homogenizer 500-6,600 rpm Surface in the product room is highly polished The following components are integrated: Vacuum pump Heating PLC control PC with process visualization and automation software Documents: available

Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (powder jet), water-cooled motor. Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ

Vacuum water degassing system Manufacturer: GEA/Filler Pack Type ONEX Capacity: 30,000 L/hour, 300 HL/hour Technical specifications : The facility is 2-stage Residual oxygen content

Process Vessels Manufacturer: Schwarte-Milfor Capacity 750 l Cylindrical process vessel standing on feet, hermetically welded insulation, Double jacket, WGR MR 125 magnetic agitator on the bottom, agitator flange on the underbody (drive missing) Product space: vacuum and pressure resistant -1/3 bar, operating temperature -10/150 °C Interior polished, double jacket: Pressure-resistant up to 3 bar, operating temperature 150 °C the measurements are: Total height approx. 2,300 cm Diameter approx. 1,050 cm cylindrical height approx. 1,300 cm Feet 300 cm high Double jacket inlet and outlet DN 25 Last Assignment Pharmacy very good condition

Sterile/Aseptic Containers Manufacturer : Vogelbusch Capacity: 18100 liters Technical specifications : Cylindrical, upright stainless steel tank with double jacket Weight 3950 kg Loading room: Pressure- and vacuum-resistant +4/-1 bar Test pressure 6.5 bar Operating temperature 145 °C Material 1.4435 Boiler room: Pressure- and vacuum-resistant +4/-1 bar Test pressure 6.5 bar Operating temperature 145 °C Capacity 230 litres Material 1.4404/316 l/ the container was used in the pharmaceutical industry for sterile water insulating sheet outside is screwed would have to be partially replaced, as the container is equipped with glass wool is insulated, the sheet metal was deformed during transport. Equipment: Manhole Hand hole DN 200 Cip nozzle DN 50 2x sight glass Rupture disc Cooling/heating jacket inlet and outlet DN 25 GMP Various supports Manhole: ...

Stainless steel magazines/cassettes for the handling (loading and unloading) of ampoules, vials, etc., internal magazine dimensions approx. 445 x 150 x 75 mm (LxWxH); external magazine dimensions including lid approx. 445 x 150 x 90 mm, includes mobile rack trolleys (overall dimensions approx. 1,300 x 660 x 1,380 mm (LxWxH)) with rollable magazine trolleys (dimensions approx. 910 x 650 x 1,020 mm (LxWxH)), capacity per rack trolley 48 magazines/cassettes, a total of 50 rack trolleys with a total quantity of 2,400 magazines/cassettes are available

1200 litre process vessel Manufacturer Prai HiPurity Systems Ltd. Type IMV – 1200 W, H – 14471 unused Year of construction 2015 electro-polished Double-jacket, pressure-resistant Product room 3 bar Double jacket 4 bar Operating temperature 165° C Magnetic agitator on the underbody, Fabr. Merck Millipur Type GMP Drive 2000 Extensive documentation available, including qualification documents

Paste mixer Manufacturer: MTI Type P-10ADO Performance: Usable volume 11 litres, nominal volume 15 L Technical specifications : The paste mixer is suitable for mixing, homogenizing, dispersing and suspension of low to high viscosity products, Externally heated up to 65 °C and vacuum-proof Heating cooling jacket 5 bar Product space 0.75 Equipment: Machine stand Transmission suspension with drive motors Flanged weelen bearing with container lid and mixing tools Mixing tanks Squeezing device Electrical control Dimensions: Length 1210 mm Width 1180 mm Height 1925 kmm Weight 1700 kg

Stainless steel tanks Manufacturer Noorden Capacity 500 litres Mobile standing stainless steel tank Double jacket for heating and cooling without pressure Product space pressure- and vacuum-resistant -1/+3 bar Operating temperature product space around jacket 150 °C Magnetic stirrer on the underbody Power 0.25 kW Outer diameter: 0.90 m Total height 1.95 m Spout DN 25 Clamp

Stainless steel tanks Manufacturer Tannroda GmbH, stainless steel construction Type SLT/BB 001 - No. 548 Capacity 2200 litres Cylindrical stainless steel tank standing on feet Material in contact with the product 1.4404 Interior -1/+3 bar Double-jacketed pressure and vacuum resistant Heated and cooled Agitator The container has a slight vacuum damage in the interior, see picture. Drawing available, documents available

Eddy current screening machine with belt drive Manufacturer: Kemutec KEK Type K 800 C Version - ATEX 2/3 D

Dental colloid mill Manufacturer: Probst & Class PUC Type 10 L Power 7.5 kW U/2.910 min.

Inline homogenizer Manufacturer: Higra Mix Type HG 140 Capacity: 40,000 l/h Power: approx. 30 kW Speed: 3,000 rpm Dimensions: Length 1100 x Width 450 x Height 600 cm Net weight: 220 kg Mixing chamber: diameter 185 mm Product inlet: DN 100 Product outlet: DN 80 The homogenizer is designed for the production of emulsions and suspensions with a wide range of viscosity.

100 litre process tank Manufacturer: Hermann Waldner Content: 100 litres Technical specifications : cylindrical standing stainless steel tank with double jacket, insulation and agitator Material container 1.4435 Operating temperature 80 °C Material double jacket 1.4404 Pressure-resistant 2.5 bar Operating temperature 90 °C Capacity 22 litres Equipment: Propeller agitator Spout at the bottom center Agitator from above Documents: Nameplate

50 litre stainless steel container Manufacturer: Waldner Content: 50 litres Technical specifications : cylindrical standing single-walled stainless steel tank Material 1.4301 Operating temperature 40 °C Propeller agitator kW 0.37, 1,405 rpm the interior of the container is plastic-coated Spout at the bottom center Documents: Nameplate

Mixer Manufacturer : AVA Huep GmbH & Co. KG Type: HTL 3 Power: 1.1 kW Content: 4 liters gross volume Technical specifications : Stainless steel mixers for powdery to paste-like products Dimensions Speed 15-400 rpm, rated speed 128 rpm Frequency-controlled Width approx. 512 mm Height approx. 701 mm without table Length approx. 1076 kg Weight approx. 200 kg Documents: available

Electrically heated process vessel Filling device Manufacturer: Haas Type FMSX consisting of: Electrically heated agitator tank with a capacity of approx. 90 litres Heated Mouvex piston pump, electric heater, control cabinet with Siemens PLC and FU for pump and agitator, in a mobile stainless steel frame.

Plate apparatus Manufacturer APV Type K 55 Capacity: 8,000 litres/hour Technical specifications : 6 Departments 1x steam, 1x hot water, 2x product vs. product, 1x cold water, 1x ice water Capacity 8,000 litres/hour Clip seals 423 plates total Material Plates AISI 316 (V4A), thickness 0.8 mm 1 box with replacement seals is still included. good condition Documents partially available

In-line homogenizer with high shear force Manufacturer BWS Technologie GmbH Type S 200 Material parts in contact with the product 1.4462 Double-acting mechanical seal Motor explosion-proof Output 22 kW, liter output max. 10,000 l/h Suitable for dispersing, emulsifying and homogenizing

Process Vessels Net capacity 250 litres, gross capacity 339 litres Pharmaceutical version Agitator Polished interior Product space: Pressure-resistant up to 2.5 bar, operating temperature 138 °C Double jacket: Pressure-resistant up to 4 bar, operating temperature 151 °C mobile

Homogenizing Machine Manufacturer: EscoLabor Type EL-3

Universal machine Manufacturer: Stephan Type UMC 12 Capacity 12 litres Batch size 2-7 Tabletop device: Bowl and lid made of stainless steel, polished inside, Knife holder polished Bowl with double jacket and temperature probe Polyamide transport sash for manual operation Control Panel Vacuum-resistant design incl. pressure gauge and connections Membrane keypad for two speeds (1,420 and 2,810 rpm) Product temperature display and time selection Separate control box, drive motor with brake Application: Confectionery and bakery products, laboratories, cosmetic and pharmaceutical products

Universal machine Manufacturer: Stephan Type UMC 12 Capacity 12 litres Tools Polycarbonate lid Bowl made of V2A, ceramic-blasted, cool/heat double jacket Polyamide transport sash Control membrane keyboard 2011 in the equipment cabinet Knife holder with 2 Kullen knives Temperature sensor PT 100 Auxiliary contactor shutdown main motor when temperature reaches Operating instructions available

Stainless steel tank, capacity 1200 litres Manufacturer: REIMELT Beam agitator, power 2.2 kW Head single-walled, hinged lid Outer diameter: 1,260 mm cyl. Height 1,000 mm Total height without agitator 1,750 mm Total height with agitator 2,300 mm

Water Distillation Plant Manufacturer Stilmas Type MS 10 4 S Serial No. 4285/90 Capacity 120 -220 lt/h Temperature 143-175 °C Steam 36-75 kg/h Pressure of 3-8 bar Documents available

2000 litre process vessel Manufacturer: TSA Process Equipment WFI Containers NEW in original packaging Year of construction 2020 electro-polished Double-jacket, pressure-resistant Operating temperature product room 130 °C Operating temperature sheath 170 °C Accessories

Distillation plant for WFI water or pure steam generation Manufacturer: DEWA Type DP 30 EVS Distillation or pure steam plant this system can be used to produce either distillate or pure steam. Production 30 litres/h Feed water consumption 35 l/h Cooling water consumption system at 95 °C Destwasser 200 l/h electric heating capacity 18 kW max. operating pressure 1.9 bar min. cooling water pressure 1.0 bar min. feed water pressure 1.0 bar min. pressure for control air 6.0 bar Total capacity evaporator approx. 27 litres Evaporator capacity at max. level approx. 11 litres Dimensions: Height 2240 mm Width 970 mm Depth 700 mm Empty weight 300 kg

Tagential Flow Filter System Manufacturer: Millipore Model Cogent M1 Year of construction 08/2019 Functionality: Tagential flow filtration for process development, scaling studies and small-scale production Capacity: processes volumes from 300 ml to over 100 L Cassette support: up to 5 Pellicon 2 or 3 cassettes, total membrane area up to several m² Control: automatic transmembrane pressure (TMP) and differential pressure control (DP); Control modes include constant DP and constant TMP Flow rate: Maximum 4.5 L/min at 5 bar gauge pressure Materials & Design: Stainless steel components designed for clean-in-place (CIP) and compatibility with high process temperatures User interface: intuitive, multilingual touchscreen Data processing: Data collection can be uploaded as CSV files Operating conditions: voltage 220-230 V, frequency 50/60 Hz, operating temperature range 4 °C to ...

Seidenader line for the visual inspection of vials, comprising a Seidenader DT1202 vial/bottle feeding turntable with a diameter of 1200 mm, 1 x 2 units. Seidenader V90-AVSB/30-LR + V90-AVSB/30-RL semi-automatic inspection machines for the visual inspection of cosmetic defects and particles in vials, etc., size range from 0.5 to 1000 ml, throughput of up to 150 objects per minute. The machine is used for the visual inspection of particles, glass defects and gross defects, cracks and hairline cracks. The machines are equipped with TYNDALL light from the top front for cap and glass defects (the light shines from above onto the caps of the containers; for lyophilisates, powders and emulsions, it also shines onto the product) and TYNDALL light from below at the front for non-clear liquids, emulsions, powders and lyophilisates (the light shines diagonally from below onto the base of the conta ...