other machines and plants used for sale (14,280)

This is a new product in packaging. The seller has a forklift and staff on-site to load your purchased products onto the truck. Auction-ID: A7-43857-39

Fella KM 310 FZ-KC Disc Mower – 3.10 m – Defective Offered: Fella KM 310 FZ-KC disc mower, year 2008. PTO driven rear mower suitable for mounting on the three-point linkage of a tractor. Technical data: - Brand: Fella - Type: KM 310 FZ-KC - Year of construction: 2008 - Working width: approx. 3.10 meters - Drive: PTO (540 rpm) - Hydraulic side adjustment - CE marking available - Own weight: approx. 350 kg Dimensions (approximately): - Transport length: 1.80 – 2.20 m - Transport width: 3.10 m - Transport height: 1.20 – 1.50 m Note: Machine is defective and is being sold for parts or repair. Technical operation unknown. Sale in current condition without warranty. Normal signs of wear appropriate to age and commitment. Auction-ID: A1-40128-304

Detailed manual attached Model: LG AC09BH UA3 Alternative model: S3UM09JARGA Type: Split room air conditioner / split air conditioner Power supply: Single-phase Voltage rating: 220–240 V~ Frequency: 50 Hz CAPACITY Cooling: 2 500 W (8 151 kcal/h) Heating: 3 300 W (2 839 kcal/h) Capacity: 8 538 BTU/hr (cooling) / 11 288 BTU/hr (heating) NOMINAL CONSUMPTION Cooling power consumption: 656 W Heating power consumption: 800 W Cooling current consumption: 3.30 A Heating current consumption: 4.00 A MAXIMUM CONSUMPTION Maximum cooling power consumption: 1 400 W Maximum heating power consumption: 1 600 W Maximum cooling current consumption: 6.00 A Maximum heating current consumption: 7.00 A MAXIMUM PRESSURES High pressure: 4.2 MPa Low pressure: 2.4 MPa REFRIGERANT Type: R32 Quantity: 0.70 kg CO₂ equivalent: 0.473 t OTHER INFORMATION Degree of protection: IPX4 Markings: CE Contains fluor ...

To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded Auction-ID: A7-43767-45

Fresnel leonardo 2000w de sisti theatrical lighthouse (without trunk) Auction-ID: A1-43453-273

Auction-ID: A7-43914-8

New Grundfoss domestic waterwork pump set complete with pressure and flow control. Auction-ID: A1-43789-222

complete with handle Auction-ID: A1-43789-259

Dimensions: 120/70/140 cm Auction-ID: A1-43691-83

Features: Support legs, towbar coupling, heater, table, lighting, meter box, switch Auction-ID: A1-40128-182

Equipped with 6-Cil. \"international\"; PTO: 540/1000 rpm; 2 double-acting hydraulic valves; lower drawbar; Auction-ID: A1-40128-136

Normal wear and tear of the bottom of the bucket. Hydraulic door. Works perfectly. Pivot distance - front of the body = 130cm. Pivot distance - kickstands = 220cm. Auction-ID: A3-40492-37040

New and in original packaging; Opple LEDWall-Mounted; Incl. motion detector; Incl. battery for emergency light; Total luminous flux 1750lm, Light color 3000K or 4000K (switchable); Outer diameter of lamp: 330mm ; This lot has not been tested for functionality. The seller does not assume any warranty for the condition and functionality of the lot; Shipping is offered for this lot: Shipping to Austria 9,90€, Shipping to the EU 19,90€, Please contact office@karner-dechow.at ; Auction-ID: A1-43724-147

Steam heated, working pressure 6 bar, screw Ø approx. 1200x5000 mm, water content 1x 4.41 M3, 1x 3.39 m3, equipped with stainless steel output conveyor belt, size 4800x500 mm, used floor area 8500x4300 mm, without landing, stairs and grid floor Auction-ID: A1-39649-53

Auction-ID: 04B-3ZH-1

Perfectly working pneumatic tow truck. All necessary papers available. See attached photos and videos. Auction-ID: A3-43360-7819

Manufacturer: YOU JI MACHINE INDUSTRIAL CO., LTD (Taiwan)Type: CNC Vertical LatheModel: VTL-1600 ATC-IIYear: 06/2011Serial Number: 1VTL160TX02320CNC Drive: FANUC Series 18i-TBMaximum Spindle Speed: 250 rpmInstalled Power: 65 kVAPower Supply: 220 V – 3 Phase – 50 HzWeight: 25,000 kgVisible equipment: high-capacity turntable, automatic tool changer (ATC), chip conveyor, hydraulic power unit, electrical cabinet, integral fairingRemarks: Sale of the lot as visible on site. Auction-ID: A1-44030-4

Indio Discharge Headlight 400W - Disano - Black with CEE Plug Auction-ID: A1-43453-137

Manufacturer: Case IH Type: Cutting Deck Version: Vario Year of Make: 2015 First commissioning: 2017 Application: Grain Suitable for: Case IH combine harvester Table adjustment: hydraulically adjustable Vario table Screw: continuous screw Feed-in: Feed-in augers available Reel: available, with tines Knife bar: available Hydraulics: Hydraulic connections available Drive elements: fully assembled Storage locations: available Frame: undamaged Condition: used, technically and visually very good Scope of delivery: Cutting unit incl. cutting unit trolley Storage: dry Sale: separate lot Auction-ID: 047-E16-2

Auction-ID: A1-40098-507

CNC Continuous Drilling Rig MORBIDELLI AUTHOR 660 FMS Manufacturer: Morbidelli (SCM Group S.p.A., Italy) Model: AUTHOR 660 FMS Reference: 2001-07-05 Compliance: CE ⸻ Technical data Areas of work: • X: 3,100 mm • Y: 1,300 mm • Z: 40 mm Feed: • Max. feed speed: 70 m/min • Infinitely adjustable CNC technology: • CNC axes: 9 • Number of separate units: 6 • Control: PC Control / NUM Drilling technology: • Vertical drills: 64 • Horizontal drill X: 76 • Horizontal drill Y: 2 • Grooving saw available • Fitting drilling unit available • Continuous drilling rig Automation: • Automatic feeding via belt conveyor • Automatic discharge via belt conveyor • Handheld terminal Security: • Closed safety fence Total connected load: 40 kW ⸻ Condition / Note The NUM control system is currently defective. A repair offer from NUM is availa ...

Type: Steel construction / metal structure Year of construction: 2026 Material: Steel construction Total area: approx. 60 m² Overall dimensions (L x W): 10,000 x 6,000 mm Eaves height: 2,500 mm Ridge height: 3,223 mm Roof slope: 10° Finish: Galva Zinc (galvanized finish) Main structure: 4 beams (trusses) – IPE 180 profile; 2 columns – HEA 220 profile; Assembly: Bolted construction (demountable structure) Documentation: Certificate of conformity for materials included Condition: Unused Loading: Free loading included Auction-ID: A7-43905-7

\"General data: Machine type: Sorting system with conveyor & color separator Serial no.: VSCMM 12-09-167 Dimensions: Sorter: ~3100×1900×2000 mm Color separator: ~2400×2500×2250 mm Transverse conveyor: ~5500×650 mm Main conveyor belt: 3000×1650 mm Equipment & features: Conveyor belt system Color separator with touch control Multi-sorting functionality\" Auction-ID: A7-44020-1

a' 20 litres, On 1 pallet Auction-ID: A1-39649-1825

Auction-ID: A1-40098-86

Pixelbar 18Q4 Tour RGBW 18x8W 18° LED Bar - DMX 3-5poles - No Power Supply Auction-ID: A1-43453-45

Bulldozer blade Liebher 712; Auction-ID: A7-43908-282

Equipped with 2 pieces. Auction-ID: A1-40098-116