We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Type of machinery
(Quantity: > 4)
Manufacturer:
(Category: 1300)
used
Leather goods vacuum wrapping machine including wrapping tools for various small formats LeporelloKalendner, A7 Cases, Business Card Holders, Car License Cases
used
used
Tools in format approx. 23 x 36 cm + various calendar and notebook tools
used
Vacuum wrapping machine for leather goods including various wrapping tools Tools in format approx. 30.5 x 49 cm approx. 24.0 x 42 cm approx. 30.5 x 45 cm approx. 60.0 x 40 cm
used
Vacuum wrapping machine for writing pads in the format 65 x 45 cm including tools
used
Cleaning machine / grinding machine for leather goods/belts / shoes with 2 speeds
used
SCHÄFER/ KLENS blasting technology. Dust-free sand blasting equipment for stonemasonry, Age 2005., Blasting head with brush seal, Push button on/off, Suction hose, Blasting hose, Dosing valve for blasting Hose, Automatic filling valve, Blasting media pressure container, 33 liter capacity, Dust removal hose, Connection for compressed air, Power connection, Pressure relief valve, Suction device, Air requirement max. 750 lts/ 4 bar, Power consumption up to 3000 watts (380V), Rolling cart with handle
used
Leather goods wrapping machine with various tools up to approx. A6
used
Machine for punching and sharpening belts at the same time
used
Machine for polishing and belt edges
used
Output: 25-49 cycles/min, film material: PA/PE composite film or polyethylene film, cushion length range: 40mm-160mm, film width range: 420mm/767mm, max. roll diameter: 280mm, machine dimensions X/Y/Z: approx. 1600mm/800mm/1300mm, weight: approx. 230kg. Documentation available. On-site inspection is possible.
used
Two Stäubli robots including controller and stand are available. 1) 2x Stäubli RX160L robots, year of manufacture: 2017, axes: 6, payload nominal/maximum: 14kg/28kg, reach: 2010mm, repeat accuracy: +/-0.05mm, max. speed: 12.3m/s, weight: approx. 250kg, operating hours: approx. 52000h. 2) 2x Stäubli CS8C-RX160 controllers, year of manufacture: 2017. 3) 2x robot stands for Stäubli RX160L. Documentation available. On-site inspection is possible.
used
A vacuum lifting beam including a small sanding unit and a motor is available. Year of construction: 1994, load capacity: 10000kg, dead weight: 3000kg. Engine: Hatz 3L40C and sanding station: Hommel. On-site inspection is possible.
used
used
4 OTIS elevators for sale – very well maintained, fully functional! We are selling 4 elevator systems from OTIS, built in 2011. The facilities are built over 8 floors, very well maintained and fully functional. The removal is carried out by the buyer. Details: • Manufacturer: OTIS • Year of manufacture: 2001 • Facilities over 8 floors • Very neat condition • Dismantling and collection on your own • Price per unit: 5.000 € Viewing possible by arrangement. Ideal for hotels, office buildings, apartment buildings or existing projects.
used
Hydraulic power unit with tank and internal Pump. • 15 kW electric motor. •Switchboard Control box and cable for electrical Connection. • Heat taischer integrated. •Oil filter with electrical monitoring. • Oil temperature monitoring. • Float switch (oil level) with electric Surveillance. • Rexroth Hydronorma Relief valve. •Window Oil level. • Oil connection cables included.
used
The metal separator was only in use for a short time and makes a new impression Operating instructions available Availability: immediately
used
For sale is a good used Keyence digital measurement projector of the type IM-6025. The measuring device is sold including the IM-7500 control unit. Prior sale and errors excepted.
used
Various devices and machines are available. 1) Small vibrating mill William Boulton. 2) Compressor motor KDT 2.80, power: 2.3kW, quantity: 3. 3) Roof ventilator, quantity: 2. 4) Oven. 5) Pump (DIA) SZ80-1KR 225. 6) Robot Fanuc M-410i, year of manufacture: 1997. On-site inspection is possible.
new
: 150000 kglength: 12000 mmwidth: 5000 mmheight: 1400 mm: lenkbar : lenkbar size of tyres: 645 x 250 mmdimensions: 14,4 x 5,0 x 1,4 mHeavy duty trailer with- Double steering- small turning circle- very robust, therefore low maintenance- Reversible drawbar- 50mm impregnated wooden support. (Picture is with steel pad)- Standard paint changes. On request in their Ral color.Chassis: 16 wheels 22x12x16 on 8 axles and 4 rockersWould you like other loads and dimensions? Please contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 15000 kglength: 10000 mmwidth: 2450 mmheight: 625 mm: lenkbar : lenkbar size of tyres: 425 x 260 mmweight of the machine ca.: 2,9 tdimensions of the machine ca.: ca. 11,7 x 2,5 x 0,625 mmHeavy duty trailer with- Double turntable steering- small turning circle- Tilt-proof due to steering lock limitation- very robust, therefore low maintenance- Reversible drawbar, Length 1320mm- impregnated wooden support.Would you like other loads and dimensions? Please contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 10000 kglength: 6000 mmwidth: 2450 mmheight: 587 mm: lenkbar : lenkbar size of tyres: 406,4 x 254 mmweight of the machine ca.: 2,1 tdimensions of the machine ca.: 7,2 x 2,5 x 0,6 mmHeavy load trailer with- double steering- small turning circle- Tilt-safe as steering angle limit- robust, low maintenance- reversible drawbar, Length 1320mm- 50mm impregnated wood overlay.Would you like other loads and dimensions? Please contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 5000 kglength: 6000 mmwidth: 2450 mmheight: 527 mm: lenkbar : lenkbar size of tyres: 406,4 x 127 mmweight of the machine ca.: 1,8 tdimensions of the machine ca.: 7,2 x 2,45 x 0,527 mmHeavy load trailer with- double steering- small turning circle- Tilt-safe as steering angle limit- robust, low maintenance- reversible drawbar- 50mm impregnated wood overlay.Would you like other loads and dimensions? Please contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 40000 kglength: 9000 mmwidth: 3000 mmheight: 900 mm: lenkbar : lenkbar size of tyres: 540 x 300 2-fach mmdimensions: 10,9 x 3,0 x 0,9 mHeavy load trailer with- double steering- small turning circle- Tilt-proof due to steering angle limitation- very robust, thus low maintenance- Reversible drawbar- impregnated wood support.Would you like other loads and dimensions? Please contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 35000 kglength: 7000 mmwidth: 2500 mmheight: 600 mm: lenkbar : lenkbar size of tyres: 8 Stk. 450 x 300 mmweight of the machine ca.: 3,9 tdimensions of the machine ca.: 8,9 x 2,5 x 0,6 mmHeavy load trailer with- double steering- small turning circle- Tilt-proof due to steering angle limitation- very robust, thus low maintenance- Reversible drawbar- impregnated wood support.Would you like other loads and dimensions? Please contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 20000 kglength: 6000 mmwidth: 2450 mmheight: 697 mm: lenkbar : lenkbar size of tyres: 450 x 300 weight of the machine ca.: 2,8 tdimensions of the machine ca.: 7,2 x 2,5 x 0,7 mmHeavy load trailer with- double steering- small turning circle- Tilt-safe as steering angle limit- robust, low maintenance- reversible drawbar, Length 1320mm- 50mm impregnated wood overlay.Would you like other loads and dimensions? Please contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 30000 kglength: 6000 mmwidth: 2500 mmheight: 823 mm: lenkbar : lenkbar size of tyres: 425 x 260 / 2-fach mmweight of the machine ca.: 3,2 tdimensions of the machine ca.: 7,9 x 2,5 x 0,823 mmHeavy load trailer with- double steering- small turning circle- Tilt-proof due to steering angle limitation- very robust, thus low maintenance- Reversible drawbar, Length 1320mm- impregnated wood support.Would you like other loads and dimensions? Please contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 50000 kglength: 12000 mmwidth: 3000 mmheight: 1100 mm: lenkbar : lenkbar size of tyres: 540 x 300 8-fach mmdimensions: 13,9 x 3,0 x 1,1 mHeavy load trailer with- double steering- small turning circle- Tilt-proof due to steering angle limitation- very robust, thus low maintenance- Reversible drawbar- impregnated wood support.Would you like other loads and dimensions? Please contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Groninger ZSK800 Cap Sorter BJ.2002 With 5 different format sets Universally applicable, in very good condition!