other machines and plants used for sale (14,235)

Auction-ID: A1-44026-40

Equipped with: custom made, new handles, lighting, radio, windscreen wipers, electric windows, center console with storage compartment Auction-ID: A1-42008-180

Featured; 4\" Dump coupling; water sprayer; Flow meter defective! Auction-ID: A1-40129-201

Table inner dimensions 8300 x 3300mm (press surface) Table load capacity 500kg (surface load) Total installation dimensions of the baler 10.2 x 3.7 x 3.0m Total weight of the press approx. 2700kg Connected load 9 KW 400 Volt All parts powder-coated Table RAL 7035 Membrane frame RAL 7011 Pressure differential switch for displaying and adjusting the negative pressure system and pressing pressure Vacuum press VMP 8333 consisting of: Table base made of welded Tubular steel construction consisting of 5 bolted lightweight segments with adjustable feet for height adjustment, Table covering made of 22mm grey on both sides coated MDF board with 8 Suction Holes 19mm, Slotted board made of 10mm MDF raw with Grid grooves 80x80mm on the underside for air distribution, (protection + wear plate) Vertically opening membrane frame made of Welded tubular steel construction with Diaphragm quick-chan ...

Refrigerator comes directly from the catering industry, operation not checked. Viewing by appointment. Auction-ID: A1-40227-47

Equipped with: 4x double-acting rear hydraulic valves, front linkage, bevel (adjustable tipper knob), adjustable pitonfix tow bar, adjustable muzzle tow bar, all-round lighting, NL registration, armrest with control panel, top link front and rear, fender control, suspension and heated seat, isobus, load-sensing, ABS connection, work lights, suspended front axle, air pressure brake system, hydraulic braking system, suspended cabin, on-board computer (S-TECH 700 plus with advanced option transmission settings), external air connection + blow gun in cab, PTO rpm (540/540e/1000), max travel speed 45km/h Auction-ID: A1-40129-1

Auction-ID: A1-44026-52

Features gas analyzer. A low-emission machine. Auction-ID: A1-41987-85

Just blank approved for sale. Auction-ID: A3-40493-9019

Auction-ID: A1-40129-262

Outfeed belt: 3000X800mm, Level sensors, Box size: 1600X1200mm, Semi-automatic control. Auction-ID: A1-44026-37

Very good hardware works perfectly Auction-ID: A3-40494-36923

Auction-ID: A3-43494-2024

The vehicle is a trailer (trailer AR). The brand name of the trailer is VDBT. The coachbuilder is Constructie-Carrosserie Ancar. The manufacturer is located at Prins Boudewijnlaan 52, 9991 Adegem, Belgium. The type of the trailer is E1800 (E-1800). The year of manufacture of the trailer is 1979. The date of first registration is 18/10/1979. The date of first use is 18/10/1979. The date of last registration is 04/04/2025. The license plate is QATQ223. The document number of the registration certificate is 374509557. The chassis number mentioned on documents is 79308 / 57. The VIN number on the registration certificate is 79308(02). The PVG number / Belgian reference number is 024239. The number PVA on the nameplate is 24239. The vehicle has 2 axles. The vehicle has no engine axles. The suspension of the trailer is mechanical. The mass ready to drive (tare) is 720 kg. Th ...

Equipped with: MONDIAL CELTIC 14 conventional lathe, distance between the centers 1000mm, mechanical speeds, thread cutting possible phase 230V, 2-speed motor, 16 adjustable spindle speeds from 24 to 1000 rpm, driven power supply in both directions, also transverse, safety protection for the chuck, splash guard, quick-change tool holder with 2 holders, MT3 rear spindle, center height: 180 mm, spindle bore: 35 mm, dimensions (approx.) length: approx. 2,100 – 2,200 mm, Width: approx. 900 mm, height: approx. 1,200 mm, weight: approx. 1,000 – 1,200 kg, including centers, tool holders, and 4-jaw. Auction-ID: A1-41987-15

Includes battery charger; electric; Auction-ID: A1-40129-261

Auction-ID: A1-40129-297

Hose 280m diameter 90mm. Auction-ID: A1-40129-153

cartridges - impulse filters,filter area: 140.4 m²,fan type: MA 63/359,airflow: 3800 m³/h,operating temperature: max. 80°C,motor: 7.5 kW/400/690 V, 2910 rpm,filter dimensions: aprox 1900x1600x4000mm,weight: 1150 kg Auction-ID: A7-44568-1

No obligation of possession of a certificate of conformity (COC) due to import from NL. Auction-ID: A3-40493-13012

Diameter: 1550mm Auction-ID: A1-44026-66

A total of 2 pieces ; unused ; Watts: 15-75 ; see photos for more details Auction-ID: A7-44569-260

Extensive batch of high-quality Belimo components for air conditioning technology (HVAC). Control mostly 24V AC/DC, Modulating / MP-Bus. The lot consists of the following parts: Energy Valve 1x Belimo Energy Valve DN50 (Complete set incl. P6080W1100E-MP motor, sensor module and flanges) Complete control sets (flow measurement + control valve) 3x Set DN40: EP040R+MP (Flow) + NV24A-SR-TPC (Control Valve) 1x Set DN50: EP050R+MP (Flow) + NV24A-SR-TPC (Control Valve) 1x Mixing group DN50: EP050R+MP (Flow) + LV24A-SR-TPC (Mixing valve) Flow Sensor Sets (Motor + Sensor unit) 1x Set DN50 (EP050R+MP) 4x Set DN40 (EP040R+MP) 1x Set DN32 (EP032R+MP) 2x Set DN25 (EP025R+MP + extra manual valve) 1x Set DN15 (EP015R+MP) Linear Motors / Valves 1x NV24A-SR-TPC (Separate motor 1000N) 1x NV24A-SR-TPC on control valve (1000N) 1x LV24A-SR-TPC on control valve (500N) 1x Set DN15: NV24A-SR-TPC on 3-way mixing ...

4 cylinder, engine runs but not with starter motor Auction-ID: A3-43494-15014

Roller width 140 cm. Missing 2 support wheels Auction-ID: A1-43644-10

Comprising: Tamesur SA steel inlet hopper, dimensions: 3375 mm x 4950 mm x 4000 mm, Tamesur SA lifting screw conveyor, model: ELV2, number: 952, year of manufacture: 2011, 380 V, 5.5 kW, lifting height: 7600 mm, overall dimensions: 12000 mm x 800 mm x 8000 mm, Tamesur SA transport screw conveyor, screw diameter: 220 mm, level: 200 mm, dimensions: 3100 mm x 400 mm x 1100 mm, 4 Tamesur SA steel hoppers with outlet screw conveyors, model: (4x) TO4420, year of manufacture: (4x) 2012, internal dimensions: (4x) 3800 mm x 3800 mm x 5000 mm, overall dimensions: (4x) 3850mm x 3850mm x 5500mm. Auction-ID: A1-44544-4

Equipped with CW30 connections (top/bottom) Auction-ID: A1-40129-257

For sale is an elumatec SBZ 150 CNC profile machining center, designed for the efficient processing of aluminum, steel and plastic profiles. The machine is ideal for applications in window, door and façade construction as well as for industrial profile processing. The elumatec SBZ 150 has a powerful 15 kW high-frequency spindle from the manufacturer Omlat with a speed range of 12,000 to 22,000 rpm, which enables precise milling, drilling and tapping work. The spindle is controlled by a Control Techniques Unidrive frequency converter, which ensures infinitely variable speed control. The machine is equipped with a CNC control system from elumatec and offers a clear user interface with a separate control panel, screen, keyboard as well as emergency stop and hand controls. Several pneumatic clamping devices enable the profiles to be securely fixed during machining. The system also inc ...

Very correct car with very few kilometers. The car always undergoes technical inspection. Auction-ID: A3-40493-7784

Superstructure (original on Daf CF) Frigo: 80cm deep x 160cm wide x 130cm high Open part middle: 310cm long Rear cargo box: 165cm x165cm high x 210cm wide Size: 600cm long x 222cm wide x 175cm high Includes cooling compressor and mudguards Auction-ID: A3-43362-22002