miscellaneous used for sale (2,002)

This 3-axis Nicolas Correa CF-22 Bed Type Milling Machine was manufactured in 1998. It features a universal manual U22 head with dual orientation, hydraulic tool clamping, and an ISO 50 tool taper. The table dimensions are 2,500 × 700 mm, supporting a maximum load of 4,000 kg. Spindle speeds range up to 4,000 rpm, powered by a 29 kW motor. Reach out for further details regarding this machine.

Automatic washing line for IBC containers manufactured by Pohjaranta Oy. Manufacturer: Pohjaranta Oy Finland Type: IBC-PK1 Model year: 2013 Feed conveyor, line of 8 containers Junction station Control center, Siemens Various washing programs, heating of washing water, conductivity Automatic wash / manual program Condition: Slightly used, in very good condition Has been in a warm and in a dry production environment in working condition.

CHILLER ✔️ Brand: Carrier ✔️ Model: 30XA ✔️ Year: 2012 ✔️ Fluid: R134a ✔️ Load: ~134 kg ⚙️ Key features: Power consumption: ≈ 312 kW Max amperage: ≈ 522 A Power supply: 400V – Three-phase – 50 Hz Weight: ≈ 6723 kg

The SolidC UltraPure pump is an efficient and economical centrifugal pump that meets the requirements of pharmaceutical industries. It gently handles products and resists chemical agents., Pump: Centrifugal pump , Dn (mm): 34 , engine type: WEG, dn (mm): 34 , Engine power: 380V 50Hz 11kW , Link to manufacturer: .alfalaval.fr/

Swiss-made Isoma centering microscope, in very good condition. 10x magnification, hardened and ground steel tube Ø25h5. Zentriermikroskope der Schweizer Marke Isoma. Vergrösserung 10x, Stahltubus Ø25h5 gehärtet und geschliffen. Zustand: sehr gut. Centering microscope from the Swiss brand Isoma. Magnification 10x, Steel tube Ø25h5 hardened and grounded. Great condition.

Quick-release drilling device for milling machine, drilling machine. Drilling barrel diameter 5 mm. DIN 6348 - size 0. Schnellspanner DIN 6348 - Gr 0. Für Fräsmaschine, Tisch-Säulenbohrmaschine. Bohrung: 5mm

Mechanical condition: good, with traces of storage. Pneumatic condition: defective, to be redone. Weight: 30 kgs. Mechanischer Zustand: gut, mit Lagerspuren. Pneumatischer Zustand: defekt. Gewicht: 30 Kg

Liquid ring pump., Pump: Liquid ring pump , dn (mm): 48 , Dn (mm): 48 , Engine type: DDA132S4, Motor type: DDA132S4, Engine power: kW 5.5 Hz 50 A 10.8/6.2 , Link to manufacturer: .fristam.de/en/centrifugal-pump-fristam-fz/fz-downloads-brochures/

BUHLER OTW 150 fluidized bed dryer/cooler, with a complete device (see description) in very good condition, has been stored for years and NOT USED Suitable for pellets, cereal flakes, extrudates... many other types of materials. or products. Sold with: 2 fans, a very nice cyclone, a steam battery to pulse hot air, hoses... Can be used in alternative methods: whether for drying materials. or to cool, you have to choose a simple inversion of hot or cold air More photos available, a lot of spare money compared to a new one... Can be shipped to any destination

This Sahinler HKP-Z 100 was manufactured in 2016. A robust C-frame PLC controlled deep drawing press, it features a pressure force of 1000 kN and a stroke of 500 mm. The machine includes a large table size of 900x600 mm and a throat depth of 300 mm, suitable for diverse punching and bending tasks. Consider the opportunity to buy this Sahinler HKP-Z 100 punching and bending machine. Contact us for more information about this machine.

Coordinate measuring machine Coord3 ARES NT 7.7.5 Year of manufacture: 2014 Motorized indexable head Renishaw PH10M hand controller: Renishaw MCU LITE-2 MPEe accuracy: 2.5 µm + L/300 Repetition accuracy: from 2.3 µm Measuring range: 700 x 700 x 500 (mm) Granite bed size: 1330x963.5x170mm Software: TouchDMIS 5.2 + dongle

This 3-axis TIGER TFA6 Bed Type Milling Machine was manufactured in 1998. It features a longitudinal travel of 2000 mm, transversal travel of 1000 mm, and vertical travel of 1000 mm. The machine is equipped with a Heidenhain TNC 426 CNC, a manual bi-rotary head, and a chip conveyor. If you are looking to get high-quality milling capabilities, consider the TIGER TFA6 machine we have for sale. Contact us for further details.

This 3-axis DEBER BTM 5A was manufactured in 2000. It features a continuous rotary table with a size of 1,500 x 1,000 mm and a maximum spindle speed of 3,000 rpm. The machine is equipped with a twin-spindle head and an automatic tool changer, enhancing its operational efficiency. If you are looking to get high-quality honing capabilities, consider the DEBER BTM 5A horizontal honing machine we have for sale. Contact us for further details.

This 3-axis ALESA MONTI MAF45 was manufactured in 1992. It features an impressive X-axis travel of 1,900 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 700 mm. The machine is equipped with a universal head and has a maximum spindle speed of 2,000 rpm. If you are looking to get high-quality machining capabilities, consider the ALESA MONTI MAF45 horizontal machining centre we have for sale. Contact us for further details.

GRONINGER PFS DFVN1000 FILLING MACHINE Filling and stoppering machine for presterilized disposable syringes. Can be used for testing sizes and small batches of products. For laboratories, test series and small batches. Machine built in 2009. CHARACTERISTICS - 2 rotary piston pumps with 2 filling needles. Gassing during filling and stoppering - Filling via rotary piston pump, peristaltic pump, time pressure, or in combination PRODUCTION - Output: 4.800 syringes/hr (max) - Syringe diameter: 8,15 mm (with stoppers) - Dosing range: 0,2 ml – 1,5 ml ENERGY - Electricity: 220/380 V, 50 Hz, 3 Ph+N+PE - Power consumption: 7 KVA (approx) DIMENSIONS - Footprint: 1500 ｘ 1135 ｘ 2000 mm (ca)

INOVA/OPTIMA DENESTER, MODEL SH250 Fully automatic system for unloading syringes from corresponding trays, then to the machine outfeed and transferred to the next machine. With infeed and outfeed conveyor belts, a separate control cabinet and an integrated control system SIEMENS, type Simatic S7-300. With various spare parts. Built in 2008. PRODUCTION Output: up to 36,000 syringes/h Tray capacity: 100 syringes/tray Syringes capacity: 1 ml DIMENSIONS Size: 280 x 150 x 200 cm (ca) Weight: 1500 kg (ca)

INOVA/OPTIMA TR240 RENESTER Fully automatic system for loading syringes into trays. With separate control cabinet and integrated control system SIEMENS, type Simatic S7-300. Comes with various spare parts. Built in 2008. PRODUCTION - Output capacity: up to 22,500 syringes/hour - Tray capacity: 100 syringes/tray - Syringes capacity: 1 ml DIMENSIONS - Footprint: 200 x 240 x 200 cm - Weight: 1200 kg

OVERWRAPPING MACHINE SOLLAS 19 Mobile automatic overwrapping machine, designed for precise single wrapping of folding cartons in the cosmetics sector. SIEMENS, Simatic S7-300 PLC. With linear infeed conveyor, 2 format sets and spare parts. Built in 2004. PRODUCTION - Machine speed: 50 cycles per minute max. (depending on setup, product, feed system, film type) Processable materials: PP, PE, and coated paper Package dimensions - Width (W): min. 40 mm; max. 200 mm - Length (L): min. 45 mm; max. 300 mm - Height (H): min. 16 mm; max. 140 mm Film roll dimensions - Outer diameter: 320 mm - Maximum roll width: min. 50 mm; max. 425 mm - Inner diameter: 45-80 mm - Film cut length: min. 110 mm; max. 590 mm SIZE - Dimensions: 3700 x 1800 x 2000 mm (ca) - Weight: 1200 kg (ca) ENERGY CONSUMPTION - Power supply: 230/400V - 3 phases + neutral 50/60Hz - Con ...

IMA 3721-F OVERWRAPPING MACHINE Automatic overwrapper for parallelepiped-shaped products. Can be used for pharmaceutical and cosmetic items. With Siemens, type Simatic S7-300 PLC. Built in 2006. PRODUCTION - Speed: 80 cycles/min - Wrapping materials: cellophane, PVC, PP and all reel-fed, heat-sealable film types - Product dimension: 65 x 23 x 60 mm (min)/300 x 150 x 400 mm (max) DIMENSIONS - Size: 4200 x 2300 x 2000 mm ca. - Weight: 1900 kg ca.

FILLING AND CAPPING MACHINE ZELLWAG Z-110 Single-station monoblock filling and capping machine for filling liquids via a Flexicon PD22I peristaltic pump. With Touch screen Siemens Simatic and separate control cabinet. With spare parts. Built in 2012. PRODUCTION - Output: 100 units/min (up to 6000 units/min, depending on format) - Format set for bottles: 1, Ø 40 mm ENERGY CONSUMPTION - Energy: 3 x 400 VAC + N + PE - Tension: 15 kW - Frequency: 50 Hz - Compressed air: 6.0 bar (min) SIZE - Weight: 1000 kg (ca) - Dimensions: 3400 x 1500 x 2400 mm (ca)