miscellaneous used for sale (1,807)

This 3-axis DEBER BTM 5A was manufactured in 2000. It features a continuous rotary table with a size of 1,500 x 1,000 mm and a maximum spindle speed of 3,000 rpm. The machine is equipped with a twin-spindle head and an automatic tool changer, enhancing its operational efficiency. If you are looking to get high-quality honing capabilities, consider the DEBER BTM 5A horizontal honing machine we have for sale. Contact us for further details.

This 3-axis ALESA MONTI MAF45 was manufactured in 1992. It features an impressive X-axis travel of 1,900 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 700 mm. The machine is equipped with a universal head and has a maximum spindle speed of 2,000 rpm. If you are looking to get high-quality machining capabilities, consider the ALESA MONTI MAF45 horizontal machining centre we have for sale. Contact us for further details.

GRONINGER PFS DFVN1000 FILLING MACHINE Filling and stoppering machine for presterilized disposable syringes. Can be used for testing sizes and small batches of products. For laboratories, test series and small batches. Machine built in 2009. CHARACTERISTICS - 2 rotary piston pumps with 2 filling needles. Gassing during filling and stoppering - Filling via rotary piston pump, peristaltic pump, time pressure, or in combination PRODUCTION - Output: 4.800 syringes/hr (max) - Syringe diameter: 8,15 mm (with stoppers) - Dosing range: 0,2 ml – 1,5 ml ENERGY - Electricity: 220/380 V, 50 Hz, 3 Ph+N+PE - Power consumption: 7 KVA (approx) DIMENSIONS - Footprint: 1500 ｘ 1135 ｘ 2000 mm (ca)

INOVA/OPTIMA DENESTER, MODEL SH250 Fully automatic system for unloading syringes from corresponding trays, then to the machine outfeed and transferred to the next machine. With infeed and outfeed conveyor belts, a separate control cabinet and an integrated control system SIEMENS, type Simatic S7-300. With various spare parts. Built in 2008. PRODUCTION Output: up to 36,000 syringes/h Tray capacity: 100 syringes/tray Syringes capacity: 1 ml DIMENSIONS Size: 280 x 150 x 200 cm (ca) Weight: 1500 kg (ca)

INOVA/OPTIMA TR240 RENESTER Fully automatic system for loading syringes into trays. With separate control cabinet and integrated control system SIEMENS, type Simatic S7-300. Comes with various spare parts. Built in 2008. PRODUCTION - Output capacity: up to 22,500 syringes/hour - Tray capacity: 100 syringes/tray - Syringes capacity: 1 ml DIMENSIONS - Footprint: 200 x 240 x 200 cm - Weight: 1200 kg

OVERWRAPPING MACHINE SOLLAS 19 Mobile automatic overwrapping machine, designed for precise single wrapping of folding cartons in the cosmetics sector. SIEMENS, Simatic S7-300 PLC. With linear infeed conveyor, 2 format sets and spare parts. Built in 2004. PRODUCTION - Machine speed: 50 cycles per minute max. (depending on setup, product, feed system, film type) Processable materials: PP, PE, and coated paper Package dimensions - Width (W): min. 40 mm; max. 200 mm - Length (L): min. 45 mm; max. 300 mm - Height (H): min. 16 mm; max. 140 mm Film roll dimensions - Outer diameter: 320 mm - Maximum roll width: min. 50 mm; max. 425 mm - Inner diameter: 45-80 mm - Film cut length: min. 110 mm; max. 590 mm SIZE - Dimensions: 3700 x 1800 x 2000 mm (ca) - Weight: 1200 kg (ca) ENERGY CONSUMPTION - Power supply: 230/400V - 3 phases + neutral 50/60Hz - Con ...

IMA 3721-F OVERWRAPPING MACHINE Automatic overwrapper for parallelepiped-shaped products. Can be used for pharmaceutical and cosmetic items. With Siemens, type Simatic S7-300 PLC. Built in 2006. PRODUCTION - Speed: 80 cycles/min - Wrapping materials: cellophane, PVC, PP and all reel-fed, heat-sealable film types - Product dimension: 65 x 23 x 60 mm (min)/300 x 150 x 400 mm (max) DIMENSIONS - Size: 4200 x 2300 x 2000 mm ca. - Weight: 1900 kg ca.

FILLING AND CAPPING MACHINE ZELLWAG Z-110 Single-station monoblock filling and capping machine for filling liquids via a Flexicon PD22I peristaltic pump. With Touch screen Siemens Simatic and separate control cabinet. With spare parts. Built in 2012. PRODUCTION - Output: 100 units/min (up to 6000 units/min, depending on format) - Format set for bottles: 1, Ø 40 mm ENERGY CONSUMPTION - Energy: 3 x 400 VAC + N + PE - Tension: 15 kW - Frequency: 50 Hz - Compressed air: 6.0 bar (min) SIZE - Weight: 1000 kg (ca) - Dimensions: 3400 x 1500 x 2400 mm (ca)

CLOSING MACHINE BAUSCH+STROBEL KS-1025 Fully automatic intermittent-motion closing machine/crimper for vials and cylindrical glass, plastic or metal containers with up to two different types of closure. Includes separate electrical panel (300 kg, 800 x 600 x 2100 mm). Built in 1996. PRODUCTION - Output: up to 4200 units/h - Processable types of closure: rubber stoppers; droppers; screw caps; pilfer-proof caps and crimp caps; special closures with pipettes; pump spray assemblies; child-proof closures DIMENSIONS - Size (mm): 2200 x 1600 x 1800 ca. - Weight (kg): 1500 ca.

BLISTER MACHINE UHLMANN B1240 Automatic blister machine for the production of various types of products like tablets, capsules, etc. With brush feeder, various format sets and spare parts. Can process PVC/ALU blisters. Built in 2007. - PLC: B&R, type Automation PC - Chiller: KKT, Type PBL-S3UM 50 PRODUCTION - Output: max of 350 blisters/min. SIZE - Dimensions: 3600 x 1100 x 1800 mm (ca.) - Weight: 1400 kg (ca.) ENERGY CONSUMPTION - Voltage: 3Ph/N/PE/AC 400V, 50 Hz

MELTER MARCHESINI DUMEK 600 L Melter used for the preparation of various products. Auxiliary unit for turboemulsifiers to heat the aqueous or oily phase, or as a preparation unit for some creamy products that do not require the functions of the turboemulsifier. Slow and/or rapid mixing systems available. Built in 2018. - Capacity: 600 liters - Material: AISI 316 stainless steel

DEHUMIDIFIER MUNTERS ML 180 Desiccant dehumidifier with air-cooled condenser. Designed to efficiently dehumidify unheated enclosed spaces, with operating hours counter. Stainless steel sheet exterior, one-piece, fully corrosion-resistant plastic, with interchangeable front and rear panels for easier installation. Built in 2009. FEATURES - operating temperature: +0 / +25 °C - dehumidifies up to -20 °C - dehumidifies up to low dew point - IEC Protective class (unit): IP33 - IEC Protective class (electrical panel): IP54 - Sound power level to room Lw(A) dB (all inlets and outlets ducted): 75 dB(A) - Filter class: G3 Process Air - Rated airflow: 180 m3/h - Available static pressure: 200 Pa Reactivation Air - Rated airflow: 67 m3/h Condenser - Sensible heat: 1.4 kW - Fan power: 0.3 kW - Rated airflow: 650 m3/h - Available static pressure: 200 Pa  ...

OPTREL PWL, SEMI-AUTOMATIC INSPECTION MACHINE Semi-automatic inspection machine for small volumes and products requiring inspection. Particles and imperfections are visually checked by an operator with a high-magnification lens and a brightness-adjusted setup. Built in 2003. CHARACTERISTICS Wide product range (ampoules, vials and cartridges for injectable liquid products) Change parts optimized for quick change over and small footprint (size: 2250 x 1750 x 2100 mm) Output: 100 units/min Working height: 900 ± 25 mm

This 3s MECOF CS 88 G Bed Type Milling Machine was manufactured in 1990. It features a working table length of 6,000 mm and a maximum permissible load of 8 tons per meter. The spindle motor power is 14.7 kW, with a speed range of 10 – 1,207 rpm. If you are looking to get high-quality milling capabilities, consider the MECOF CS 88 G machine we have for sale. Contact us for further details.

This 3-axis Parpas MT100 was manufactured in 1995, featuring a large working envelope of 3500x2000x1000 mm and equipped with 2 cast iron teams. Ideal for complex milling tasks, consider the opportunity to buy this Parpas MT100 Bed Type Milling Machine. Contact us for more information.

This 3-axis Parpas SL100 Bed Type Milling Machine was manufactured in 1989. It features a large working envelope of 2500x1500x1000 mm and is equipped with 2 steel teams. Consider the opportunity to buy this Parpas SL100 Bed Type Milling Machine. Contact us for more information.

This 3s JOBS THORA RT Bed Type Milling Machine manufactured in 2016 features a robust table measuring 1,200 mm by 1,200 mm, accommodating workpieces up to 5,000 kg. With a spindle speed of 5,000 rpm and a tool magazine capacity of 40 tools, it offers efficient milling capabilities. Consider the opportunity to buy this JOBS THORA RT Bed Type Milling Machine. Contact us for further details.

This 4-axis JOBS FRAZER cnc milling machine was manufactured in 2017. It features a large fixed table of 3100x1000 mm and high-speed axes capable of up to 35 m/min, ensuring efficient machining. The machine includes a Heidenhain iTNC 530 HSCI CNC for precise control and a 24-position disc tool magazine. If you are looking to get high-quality milling capabilities, consider the JOBS FRAZER machine we have for sale. Contact us for more information.

MW TECHNOLOGIES BENCH TOP INSPECTION SYSTEM, MODEL MIH-DX Year of construction: 2006 Machine for the inspection of vials, ampoules and other components for particulate particles. Optimized for small workstations, laboratories or production lines, suitable for integration in GMP-controlled environment. Stainless steel construction. As the unit is rated 115 V/60 Hz, for operation in Europe (230 V/50 Hz) adapter or transformer may be required unless internal wiring has been converted. 7 units of this machine are available. CHARACTERISTICS Enclosed hood with viewing window and adjustable lighting system Controls on front panel: power switch, lighting selector, intensity dial Lighting: On/off selection, intensity adjustment knob (as visible in photo) ENERGY CONSUMPTION Voltage: 115 V AC (standard US mains); Current: 5 A; Frequency: 60 Hz; Phase: single phase  ...

OPTIMA SYRINGE, CARTRIDGE AND VIAL FILLING LINE, MODEL SV125 Year of construction: 2018 Machine for filling of various products (syringes, cartridges and vials). MACHINE CHARACTERISTICS Working Height: 1960 mm Control Cabinet: 900 mm ± 15 mm Switch Cabinet Weight: 1020 Kg PRODUCTION CHARACTERISTICS Max Output: 8000 Syringes/hour, 5000 Cartridge/hour Compatible products: Ez-fill Syringe 1 ml long; Ez-fill Cartridge 3 ml Stoppers: Plunger Stopper 1 ml long; 3 ml Plunger Cartridge Nest: Nest 100 Syringe and Cartridge Tub: Tub 3, Tub PP DIMENSIONS Size (W x L x H): 1645 x 5175 x 2450 mm Weight: 2040 Kg

n°7 pallets of supports for TV screens, various models and sizes

SPECIFICATIONS: Power supply: Lithium battery Water tank: 30 l Width of the washing lane: 450 mm Speed: max. 3.5 km/h Dimensions: 96 x 55 x 122 cm Weight: 98 kg

SPECIFICATIONS: Load capacity: 24 kg Lifting height: 3 meters External dimensions : 80x60cm H 400cm Interior dimensions: 51x32cm H 85cm

Various rustic furniture in spruce and walnut wood See photos!

Various rustic furniture in spruce and walnut wood See photos!

Various rustic furniture in spruce and walnut wood See photos!

Various rustic furniture in spruce and walnut wood See photos!

Various rustic furniture in spruce and walnut wood See photos!

Sweeping width mm: 880 Number of brushes: 2 Weight: Kg 646 Total connection KW: 3

Single head INK-JET printer designed for coding and marking fast moving objects on a conveyor without requiring direct contact 1 to 5 print lines -Three possible applications: Mini (2 lines), Midi (4 lines), Maxi (5 lines) -Prints almost any surface -Prints even at high production speed -Pressure height from 1 mm to 15 mm -Various inks are available for special applications