meat and fish processing machines used for sale (1,808)

Fine smoke system with smoke generator for dosed chip quantity, Timer for smoking processes depending on the desired dryness

Kolbe MWE32 Mixed Meat Grinder completely made of stainless steel, screw, screw housing and union nut made of special alloy smooth running Wheeled on wheels Machine should be thoroughly cleaned before use Video about test run available

We are selling here a slicer from the manufacturer Treif, type Falcon in a good used and functional condition. The machine was built in 2008, runs on 380-480 volts, 7.0 kW, completely stainless steel, inlet/outlet conveyor, programmable, touch PC control, workshop tested, immediately ready for use, dimensions W/D/H 460/130/180 cm, others on request.

Stephan MCV12 Microcut, continuous cutter, colloid mill, koial mill, ultra-fine shredder Voltage: 400V Speed: 2900rpm Power: 8800W Stainless steel funnel Spout with DN50 milk thread, thus the possibility of retrofitting a circulation device for product circulation neat condition smooth running should be thoroughly cleaned before use Video about test run available

Karl Schnell B22 Process Automat Typ 250, suitable for the production of low to middle viscous emulsions and suspensions, such as Soup, sauce and gravy, Injection brine, preparation of process materials, etc, power supply 3AC 400 Volt, 50 Hz, 52 Ampere, 26 kW.

Karl Schnell KS P9 vacuum filling machine, performance max. 3200 kg/h, filling pressure max. 22 bar, portioning size 1 g - 1000 kg, portioning speed max. 700 port./min, hopper cappacity 300 liters

Automatic Double Clipper Poly Clip FCA 3442, diameter up to 75 mm, performance up to 130 cycles/min, suitable for plastic - cellulose - and collagen casings, electronic control.

Seydelmann K 204 DC 8 with ejector and feed, stainless steel bowl, tested function

We sell here a can sealing machine from the manufacturer Lanico, type V 10 A in a good used and functional condition. The machine runs on 400 volts, 0.55 kW, for 70 and 99 cans, workshop tested, immediately ready for use, dimensions W/D/H 50/50/157 cm, others on request.

Ramon 40 liter cutter, 2 speeds, bowl stainless steel, function tested

Stainless steel machine with cast bowl

Tray Sealer A 350 in use until shutdown 2

Alexanderwerk GMD70 II lifting swaging machine used Stainless steel boiler and kneading arm Boiler with drain hole for cleaning water with protective grille made of stainless steel Machine was built by Diosna and is the size of an S35 two speeds, tidy and smooth running Timer switches off the machine after the set time has elapsed very good condition, should still be thoroughly cleaned before use Video about test run and further pictures available

PVS 125 HL Emulsifier 160 litre hopper

PVS -Micro-Cut or emulsifiers. Formerly called Kolidmühle For shredding various products Production of emulsions Pastes Sauces Soups and various other products Capacity up to 150 litres Motor power 15 KW

Steaker / Meat Crumbler / Strip Cutter Manufacturer: BIZERBA / Type: S111 Specifications: 230 V / 50 Hz / 2.7 A Weight: 32 kg including 3 mm strip cutter insert Function tested, machine ready for use Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

Manual slicer with integrated packaging module KUCHLER S.A.M. 300 psh + foil machine + packer Specifications: Type slicer: SAM 300 Psh T Type film dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM T 26 230 volts / 50 Hz / 3.24 A Year of construction: 2010/2011 Film size: 21 x 26 & 21 x 22 cm several layers on top of each other can be welded Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 300 mm Stainless steel knife, Teflon coated Luminous flux Function tested, machine immediately ready for use! Condition, see original pictures! If you have any questions, email or call.

We sell here a vibrator / portioner from the manufacturer ISO-FLO, type MVIFD in a very good used and functional condition. The machine is built in 2004, runs on 400 volts, completely stainless steel, filling surface W / D / H 60 / 140 / 20 cm, workshop tested, immediately ready for use, dimensions W / D / H 200/90/75 cm, more on request.

Alexanderwerk GMD70 II lifting swaging machine used Stainless steel boiler and kneading arm Boiler with drain hole for cleaning water with protective grille made of stainless steel Machine was built by Diosna and is the size of an S35 two speeds, but rough running, should therefore possibly be subjected to a bearing change Timer switches off the machine after the set time has elapsed otherwise good condition, should still be thoroughly cleaned before use Video about test run available

We sell here a vending machine wolf from the manufacturer Meissner, type AS-114 in a very good used and functional condition. The machine runs on 400 volts, 8 kW, completely stainless steel, 2 gears, Ungersystem 114 mm, workshop tested, immediately ready for use, dimensions B/D/H 75/135/125 cm, more on request.

Slicer Bizerba VS 8, Connection 230V, weight approx. 44kg, good used condition, works perfectly several in stock

Laska W 130 Automatenwolf Perforated disc 130 mm Filling quantity approx. 1 to 2 E 2 boxes Drive 7.5KW 400 Volt 50Hz

PVS 125 H Micro-cut Drive 15 KW 400 Volt 50 Hz Horizontal design with trrichter Funnel volume approx. 120 liters

Cutter / Cutting Mixer / Bowl Cutter Manufacturer: DMS (Dillmann Maschinensysteme Saarbrücken) Type: DMK 80 V2 Equipment: Bowl: stainless steel, 80 liters capacity, designed for approx. 65 kg roast Blade speed infinitely variable from 1000 - 3600 rpm Mixing gear backwards, infinitely variable from 100 - 300 rpm 2 bowl speeds 8/16 rpm electric knife shaft brake Automatic switch-off when opening the lid Thermometer digital Noise protection cover Integrated switch box 6er knife head additional 2x 6 knife set including 4 wrenches original instruction manual Storage machine, immediately available! Specifications: 400V / 50/60 Hz / 21+0.9 kW / 43 + 2.8 A / 64 A CEE plug Total dimensions with the lid closed: H115 x W135 x D120 cm Year of construction: 2018 Weight: approx. 1040 kg Function ...

Hydraulic stainless steel freezer block cutter (guillotine) with loading for meat/fish/vegetables/cheese. NEW MACHINE IMMEDIATELY AVAILABLE FROM STOCK 2 pieces cutting knife 5 pieces cross cutting knife Cutting room: 460 x 220 x 750 mm Cutting temperature: up to -25° C Cutting capacity: up to 1,600 kg/h Push button control Hydraulic loading Machine dimensions: Width: 90 cm Length: 220 cm Height: 185 cm Weight: 550 kg Connection: 5.0 kW Voltage: 400 V, 50 Hz CE mark: yes

Shell sealer Rühle VR1, built in 2005, in a good used and functional condition. Metal parts made of stainless steel. Packaging machine / tray sealer with scale and label printer, weighs, packs and labels the goods in a single operation. PC control. Supplied with two mould inserts. Machine is prepared for fumigation. Machine is rollable. Dimensions W/D/H 60/70/170 cm. Power ratings 230 Volt, 1,5 kW. Workshop tested, immediately ready for use. More on request.

PVS 125 H i Mirco-cut Colloidmill -Ultra-fine shredder 1 Models 11 KW 15 KW and 22 KW

Cutter K+G Wetter CutMix 120 STL with load for 120 liter standard car and ejector, 120 liter cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection lid, knife shaft brake, main switch, membrane keyboard, infinitely adjustable knife shaft speed (40-4,400 rpm), infinitely variable bowl speeds (5-18 rpm), infinitely adjustable mixing gear backwards (40-500 rpm), digital display knife shaft temperature bowl, rated power 42.5 kW, K+G weather CM 120 STL

Cutter K+G Wetter CutMix 200 STL with load for 200 liter standard car and ejector, 200 liter cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection cover, knife shaft brake, main switch, membrane keyboard, infinitely adjustable knife shaft speed (40-4,400 rpm), infinitely adjustable bowl speeds (5-18 rpm), infinitely adjustable mixing gear backwards (40-500 rpm), digital display knife shaft temperature bowl, K+G weather CM 200 STL

Cutter Laska model KU 65 AC, bowl capacity 65 liters, microprocessor control, probe plate with membrane keypad and plain text display, infinitely adjustable knife shaft 35-4,900 rpm, two bowl speeds, mixing gear backwards infinitely variable, electric knife shaft brake, 6-knife head, 3-knife head optionally available for an extra charge, engine power 23 kW, operating voltage 3 x 400 VAC / 50 Hz