meat and fish processing machines used for sale (1,775)

Designed for washing smoking sticks for hanging meat and sausages with length to 1000 mm. Machine dimensions(LxBxH): 1400 x 900 x 1460 mm Water connection: ¾ ”; 4-6bar, 50...60°C; Electrical connection: 400 V/ 50 Hz Installed power, kW 1,65 Capacity pcs./h 600

Type: N 50 Number of needles: 50 Diameter of needles: 4,0 mm Max. product width: 350 mm Transportation type: walking beam Product passage height: max 180 mm Brine pressure: 0,5 - 4,0 bar Machine dimensions in mm: Width: 800,0 Length: 1600,0 Height: 1900,0 Power: 8,0 kW , 17 A Voltage: 380 V, 50Hz

Type: IMAX 520 Working with boneless meat Product width: 520 мм Cycles: 15 to 60 per minute Feed: max. 60 mm Product height: 130÷230 mm Number of needles: 200 (2 х 100), 4 мм Brine pressure: 0,5-4,5 bar Machine charging height: 1170 mm Compressed air: 6bar Voltage: 230/400 V, 50/60 Hz Connection: 10,0 kW ; 23 А Rotary brine filter DF 510 Machine dimensions in mm: Length: approx. 2100 Width: approx. 1350 (about 2500 mm with filter) Height: approx. 2300

Type: FESSMANN T 3000 3 trolleys Heating: steam Control panel: DP 11 Base width: 151 cm Base depth: 347 cm Corpus height: 250 cm Min. room height: 304 cm Recommended room height: 320 cm Smoke-trolley dimensions (HxWxD), cm: 198x104x102 Connected load for HP heating: 111 kW Smoke generator: RZ 550 Machine width: 55,0 cm Machine length: 115,0 cm Machine height: 159,0cm Rated power: 1,8 kW

Type: FESSMANN T 3000 3 trolleys Heating: steam Control panel: DP 11 Base width: 151 cm Base depth: 347 cm Corpus height: 250 cm Min. room height: 304 cm Recommended room height: 320 cm Smoke-trolley dimensions (HxWxD), cm: 198x104x102 Connected load for HP heating: 111 kW Smoke generator: RZ 550 Machine width: 55,0 cm Machine length: 115,0 cm Machine height: 159,0cm Rated power: 1,8 kW

Тype: FESSMANN AUTOVENT - 3 trolleys Base width: 151 сm Base depth: 347 сm Height corpus: 250 сm Min. room height: 293 сm Recommended room height: 293 сm Trolley dimentions (HxBxT), сm: 198х104х102

Тype: FESSMANN AUTOVENT - 1 trolley Cooking: steam low pressure 0,5 – 1,0 bar , by steam jets and high spraying rate in to the AUTOVENT Connected load for Low Pressure steam 0,5 Bar; 45 kW; 70 Kg/ h Control panel: MC 3.1 Base width: 151 сm Base depth: 127 сm Height corpus: 250 сm Min. room height: 293 сm Recommended room height: 293 сm Trolley dimentions (HxBxT), сm: 198х104х102

Тypе: FESSMANN BK 2 522 1W Baking chamber with rotating trolley of 360° Heating: electrical Control: DP 11 Width of the basic area: 198 cm Depth of the basic area: 187 cm Corpus height: 251 cm Total height: 298 сm Min. room height: 340 сm Baking trolley dimensions (HxBxT), сm: 198х102х104 Installed power, electrical heating: 88,2 kW Baking temperature: about 230 ° C

Capacity: 600 l Heating: steam, 127 kW, 8 bar Outside dimensions 110 x 130 x 135 cm (HxWxD) Inside dimensions 60 x 109 x 88 cm (HxWxD) Control: MC K Mouting Voltage: 230/400 V , 50 Hz Cover: insulated,with springs and hinges of stainless steel, opening 90° Drainage: piston – type drain cock Equipment: valves for cold and hot water

Type: MAX 500 Max. product weight: 500 кg. Drum diameter: 1000 mm Machine dimensions in mm: Width: 1600,0 Lenght: 3100,0 (incl. loading trolley) Height : 2300,0 Unloading height: 750,0 mm. Vacuum pump: 40 m3/h Power: 4,0 kW Voltage: 3х400 V, 50 Hz, 8,0 A Weight: 760 кg.

Type: Vemag Robot HP 15 С Hopper content: 250 L, one-piece Bushing with double screw Steplessly adjustable filling speed: 0 - 100 % Control: РС Portion weight: from 5 up to 60000 g Compatible to work with clips machine Vacuum pump: 20 m3/h Loading device for standard trolleys Machine dimensions in сm: Width: 134,0 Length: 220,0 Height: 200,0 Power: 17,0 kW Voltage: 380 V, 50 Hz Weight: 1300 kg

Тype: Seydelmann AU 200 Completely made of special stainless steel Hole plate diameter: 200 mm Hopper content: about 400 L Throughput depending on material type, speed, cutting set up to 10000 kg/ h Speeds: 2-speed working worm and 3-speed feeding worm - independent of each other Bayonet lock of the cutting set Column lifting device Protection device at the outlet Machine dimensions in сm: Width: 255,0 Depth: 170,0 Height: 174,0 Installed power: 57 kW Voltage: 380 V, 50 Hz Machine weight: 1900 Kg

Type: : Schröder N 138 Number of needles: 138 Diameter of needles: 4,0 mm Product width: 620 mm Transportation type: walking beam Product passage height: 200 mm Brine pressure: 0,5 – 4,0 bar Machine dimensions in cm: Width: 110,0 Length: 220,0 Height: 230,0 Power: 10,0 kW Voltage: 380 V, 50 Hz

Type: SCHRODER N 120 Number of needles: 120 Diameter of needles: 3 mm Product width: 620 mm Transportation type: walking beam Product passage height: 180 mm Brine pressure: 0,5 – 4,0 bar Machine dimensions in cm: Width: 120,0 Width with filter for brine: 200,0 Length: 220,0 Height: 225,0 Compressed air: 6,0 bar Power: 14,0 kW Voltage: 380 V, 50 Hz

Type: SCHRÖDER N 82 Number of needles: 82 Diameter of needles: 3 mm Product width: 420 mm Transportation type: walking beam Product passage height: 180 mm Brine pressure: 0,5 – 4,0 bar Machine dimensions in cm: Width: 110,0 Width with filter for brine: 200,0 Length: 210,0 Height: 200,0 Compressed air: 6bar Power: 9,0 kW, 15А Voltage: 380 V, 50 Hz

Meat cutting machine with program control different filing patterns Repaired

I am selling an angle meat slicer Seydelmann AE 130. Year of manufacture 2004. UNGER 5 system Two cutting speeds, two feeding speeds Power 20 kW Machine in original condition, fully functional. Possibility of transportation and installation of the device by an external service company. Very good condition. Price negotiable.

Used autoclave / pressure cooker KORIMAT, type: KA 160 E - New heating coil - New gasket - New valves - New thermometer - Boiler volume: 120 litres - Permissible temperature: 2°C to 138°C - Incl. bottom plate - Temperature sensor - F-value determination - Delta Boil - Pressure up to 1.6 bar Further pictures and information on request. Viewing and test run are possible by arrangement.

The inline Stephan Microcut MCH 20 is suitable for a wide range of applications in the food industry. It combines efficient mixing, fine cutting and emulsifying in one simple operation with minimum space requirement. Typical applications such as: emulstions, dressings, sauces, mayonaisse, ketchup, liquid products and pureed food. Previously used in a quark production factory. Rotor - stator principle. Efficient fine grinding. Perfect cut. Homogenous mixing. Stable emulsions. Constant product quality. In the microcut there is no metal-to-metal contact of the cutting elements. Capacity up to 1.200 kg per hour, depending on product and desired particle size. Motor: 15 kW - 400 V - 26 A - 2.925 rpm - 50 Hz., Type of Machine: Emulsifier, Capacity: up to 1.200 kg per hour, depending on product and desired particle size, Cutting system: Single, Motor: 15 kW - 400 V - 26 A - 2.925 rpm - 50 Hz, D ...

A system for the mechanical separation of meat and bones, tendons or hides is available. Throughput capacity: approx. 3t/h, filling volume: 800l, working filling capacity: 80%-95%. Machine dimensions X/Y/Z: approx. 2300mm/1800mm/2100mm, weight: approx. 2300kg, control: Siemens Simatic, operating hours: 7504h. Tools included. Documentation available. On-site inspection is possible. Expected to be available from August 2025.

The Alfa Laval MR-200 Sanitary Self Priming Liquid-ring Pump is a pump specially designed for food, chemical, pharmaceutical and other industries where acid-resistant steel is resistant to the products to be pumped. All products wetted parts, i.e. pump casing, casing cover and impeller are made of acid-resistant steel AlSl 316. Clamp screws and legs are made of stainless steel AlSl 304. lntermediate part is in cast iron which is zinc coated and laquered making it highly corrosion resistant. Motor: 7,5 kW - 400/440 V - 50 Hz - 1.440 rpm - 15 A. Impeller diameter: 199 mm. Connections on the inlet / outlet: SMS 76 mm (3). Current capacity: 35.000 ltr/h @ 1,1 Bar., Type of Machine: Sanitary Self Priming Liquid-ring Pump, Stock Number: 1653, Diameter of the impellor: 199 mm, Motor: 7,5 kW - 400/440 V - 50 Hz - 1.440 rpm - 15 A, Current maximum capacity: 35.000 ltr/h @ 1,1 Bar

Meat grinder Kolbe SW 100, Machine completely in stainless steel, with different discs, Connection 400V, dimensions LxWxH approx. 80x55x110cm, weight approx. 138kg, Year of manufacture 2010, very good used condition, machine was used very little.

AK Ramon AMM 80 mixer, bowl volume 80 litres, Year of manufacture 2022, as good as new machine, hardly used, with mixer arm drive 1 speed, bowl rotating freely, Machine completely in stainless steel, mobile, Connection 400V, dimensions LxWxH approx. 83x60x101cm, weight approx. 85kg

Meat grinder K+G Wetter EW D114, Machine completely in stainless steel, with cutting set, operating instructions, year of construction 2007, Connection 400V, 5.5kW, dimensions LxWxH approx. 93x68x112cm, weight approx. 320kg, Very good used condition, fully functional

Injector Günther PI 9, brine injector with 9 needles, with new hoses and clamps, Connection 400V, dimensions LxWxH approx. 135x50x174cm, weight approx. 223kg, good used condition, fully functional

Injector Günther PI 17, brine injector with 17 needles, hoses and clamps, pressure gauges, machine feet at the front, Connection 400V, dimensions LxWxH approx. 132x55x165cm, weight approx. 220kg, good used condition, fully functional

Rühle PR 8 injector, 8-needle brine injector, newly made: all hoses and clamps, pressure gauges, control valve, sealing rings needle beam, sealing ring valve needle beam, impeller, Connection 400V, dimensions LxWxH approx. 110x50x156cm, weight approx. 142kg, good used condition, fully functional

Injector Rühle PR 15, brine injector with 15 needles, new have been made: all hoses and connections, pressure gauges, impellers, valve on the needle beam, needle bar sealing rings, mixing valve, bearings and pump drive sealing rings, Connection 400V, dimensions LxWxH approx. 120x50x157cm, weight approx. 145kg, very good used condition, fully functional

Rühle Frozen Meat Cutter Type: GFR 450/250 CW 5.5 Cross cutter 4 pieces

" SPECIAL PRICE DUE TO BUSINESS CLOSURE" 200 mm K+G WETTER Mixer Grinder Type: MAW U200 Model: 431 Type designation 431 Year of Make: 1998 2 speeds Nominal power meat auger drive 21/35 kW Nominal power feeder drive and mixing shaft drive 4.7/5.9 kW Standard operating voltage (special voltages available on request) 400 V / 50 Hz Nominal power 41 kW Rated current 85 A Fuse 100 A gL Cutting Set Unger U 200 Perforated disc diameter 200 mm Processing capacity 184 kg/min (11 t/h) Hopper capacity 530 l Mixing capacity 350 kg Weight 2280 kg Ejector for auger and cutting set hydraulic Support device of the pre-cutter Mixed Time Selection incl. mast load for 200 litre cutter wagon – manufacturer Kittner – year of construction: 2017 completely overhauled Shipping time: immediately