injection moulding machines used for sale (1,087)

This Netstal S 6000-5500E was manufactured in 2004. A hydraulic injection moulding machine featuring a tie bar distance of 1020 x 1020 mm and an opening stroke of 950 mm. Equipped with 1 core valve, 2 air valves, and a screw diameter of 100 mm. It also includes an EU 12 for robot connection. For more information about this hydraulic injection moulding machine, please reach out to us.

This CHENDE CJ480M3V was manufactured in 2007. A hydraulic injection moulding machine featuring a tie bar distance of 800 x 770 mm and an opening stroke of 750 mm. It includes 2 core valves, 3 air valves, and an EU 12 for robot connection. Consider the CHENDE CJ480M3V machine we have for sale. Contact us for more information.

This Krauss Maffei 600 - 3500 C3 hydraulic injection moulding machine was manufactured in 2006. It features a tie bar distance of 1000 x 930 mm and an opening stroke of 1150 mm. Equipped with 1 core valve, 3 air valves, and a screw diameter of 80 mm, it also includes an EU 12 connection for robot integration. For more information about this hydraulic injection moulding machine, please reach out to us.

This Krauss Maffei 200-1000 C2 was manufactured in 2006. A hydraulic injection moulding machine featuring a tie bar distance of 560 x 560 mm and an opening stroke of 700 mm. It includes a screw diameter of 55 mm and is equipped with 1 core valve, 3 air valves, and an EU 12 connector for robot integration. A solid choice for expanding production capabilities. For more information about this hydraulic injection moulding machine, please reach out to us.

This Krauss Maffei 80-340 C2 was manufactured in 1998. It features a MC3F controller, Euromap Interface 12, and hydraulic and air units. With a screw diameter of 35 mm, it offers a maximum pressure of 2156 bar and an injection volume of 156 cm³. Consider the opportunity to buy this Krauss Maffei 80-340 C2 hydraulic injection moulding machine. Contact us for more information.

This Krauss Maffei 110-520 C1 was manufactured in 2000. It features a MC4 controller, Euromap Interface 12, and a hydraulic unit. With a screw diameter of 45 mm, it offers a maximum pressure of 1878 bar and an injection volume of 275 cm³. Consider the opportunity to buy this Krauss Maffei 110-520 C1 hydraulic injection moulding machine. Contact us for more information.

This injection moulding machine was manufactured in 2001. A robust Netstal SYNERGY 1500-600, it features a clamping force of 150 T and a screw diameter of 45 mm. It has been used for PP materials, ensuring reliability and efficiency with 56,000 production hours. A great opportunity to buy this Netstal SYNERGY 1500-600 injection moulding machine. Contact us for more information.

This Krauss Maffei 125-520 C1 was manufactured in 2001. It features a MC4 controller, Euromap Interface 12, and a screw diameter of 50 mm. With a maximum pressure of 1521 bar and an injection volume of 340 cm³, it is ideal for precision moulding tasks. Contact us for more information.

ARBURG 270 S 150-60 U ALLROUNDER MACHINE WAS FULLY SERVICED NOT LONG AGO WITH NEW SCREW TECNICAL DATA IN LIST -PHOTO EUROMAP 150-60

Fanuc ROBOSHOT α-S30iB (2023)Model: FANUC ROBOSHOT α-S30iBClamping Force: 300 kNMax. / Min. Mold Height: 330 mm / 150 mmTie Bar Distance (HxV): 310 x 290 mmPlaten Diameter: Ø 100 mmInjection Speed: 600 mm/sScrew Diameter: 22 mmScrew Volume: 11 ccmResin Compatibility: Glass fiber content up to 30%Machine Type: Fully Electric Injection Molding Machine

Arburg 320 C 500-170 (2014)Working hours : 44.124 hClamping force: 50 tScrew diameter : 25 mmShot weight : 75 gClamping force: 500 kNDistance between tie bars: 320 × 320 mmPlaten size (H × V): 446 × 446 mmMinimum mould height: 200 mmMaximum daylight opening: 550 mmEjector stroke: 125 mmScrew diameter: 30 mmMaximum shot volume: 85 cm³Maximum shot weight (PS): 77 gInjection pressure: 2000 barScrew speed max: 400 r/minNozzle stroke: 250 mmNozzle contact pressure: 40.6 kNHeating capacity: 9.4 kWPump drive power: 11 kWTotal installed power: approx. 20.5 kWL 3.4 m x W 1.4 m x H 2.0 mWeight :2 400 kgInjection UnitThermoplastics injection unit, 25 mm screw, high wear-resistant designStandard screw coupling with flat-ended geometryOpen nozzle, 25 mmNozzle tip for open nozzleHeater band for open nozzleClamping UnitMounting platen set, central diameter 125 mmCore pull 1, serial movement, holdin ...

Arburg 520S 1300-400 (2015)Clamping force: 130 tScrew diameter: 40 mm (higly wear resistant)Shot weight: 184 gDistance between tie bars V: 520 mmDistance between tie bars H: 520 mmMin/Max mould height: 350mmOpening stroke: 925mmShot volume: 201 cm3Type: HorizontalDrive: Hydraulic (Arburg servohydraulics)Hours: 28.000 hours only!+ Apex Sprue picker robot4 free cooling circuitsCore puller: 1

Engel E-Victory 170H/50V/120 combi (2015) 2k machineRobot Engel Viper 20 LinearCC300 controllClamping force: 1200 kNOpening stroke: 505 mmEjector stroke: 130 mmEjector force: 39.8 kNPump drive power: 21.361 kWInjection unit 1Screw diameter: 25 mmMax. swept volume: 59 cm³Screw speed max: 400 r/minScrew speed max (current): 400 r/minInjection rate: 109 cm³/sInjection rate (increased): 109 cm³/sSpecific injection pressure: 2400 barSpecific injection pressure (increased): 2400 barInjection unit 2Screw diameter: 20 mmMax. swept volume: 25 cm³Screw speed max: 450 r/minInjection rate: 104 cm³/sSpecific injection pressure: 2400 barMachine with conveyor.Working hours : 41.427 h

Arburg 630 S 2500 - 1300 with robot Multilift H mit B-Actise (2004)Clamping force: 250 tTie-bar spacing: 630 × 630 mmPlaten size: 900 × 900 mmMold height (Min / Max): 300 – 700 mmMaximum daylight (open space): 1,300 mmOpening stroke: 600 mmEjector stroke: 225 mmEjector force: 86 kNScrew diameter: 55 mm Shot volume: 558 cm³Injection pressure: ~2,380 barNumber of heating zones: 12Control system: SelogicaMachine dimensions: 6.4 m × 2.1 m × ~2.2 m (L × W × H)Machine weight:  14,000 kgInstalled power / electricity: ~68 kWRobot / automation interface: Euromap 2500‑1300Core pullers: hydraulic

Working hours : 21.447 hClamping force: 125 tonsTie-bar spacing (horizontal × vertical): 470 mm × 470 mm  Platen size (mould plate) approx: 745 mm × 770 mm  Minimum mould height (installation height): approx 300 mm  Mould opening (stroke): 600 mm  Maximum daylight between plates: approx 900 mm  Screw diameter: 40 mm  Injection volume: ~ 204 cm³ (≈185 g PS) in one similar spec sheet  Motor power / drive: 18.5 kW drive power (pump drive)  Heating power: around 11 kW  

Arburg 470 C 1500-350 (2006)Working hours : only 7.113 hClamping Force: 150 tons  Tie-bar Spacing: (H × V): 470 mm × 470 mm  Maximum Plate Size : 650 mm × 650 mm  Minimum Mould Installation Height: 250 mm  Maximum Distance between Platen (when fully open): ~750 mm  Mould Opening Stroke : 500 mm  Screw Diameter: 45 mmApproximate Shot Volume (Injection Volume): 230 cm³  Approximate Shot Weight (for PS): 210 g  Injection Pressure: 1 670 bar  Motor/Drive Power: Example listing ~ 37 kW servo/hydraulic drive power  Heating Power: Example listing ~ 10.2 kW  Machine Dimensions (Length × Width × Height):  5.4 m × 2.0 m × 2.2 m  Machine Weight:4 500 kg  

Arburg 420 C 1000-250 (2000)Clamping force : 100 tScrew diameter : 30 mmDistance between tie bars : 420 x 420Shot weight : 100 gWorking hours : 134.000 h

Arburg 270 C 400-100 (2000)Clamping force: 40 tScrew diameter : 20 mmDistance between tie bars : 270 x 269 mmShot weight : 25 gType : horizontalDrive : hydraulicHours : 138000 h

Machine Name : Chen Hsong EM120-VYear of Manufacture : 2011Operating Hours : 58,209Clamping Force (kN) : 1200Injection Pressure (bar) : 1700Cylinder Volume (cm³) : 203Screw Diameter (mm) : 42Horizontal Platen Size (mm) : 610Vertical Platen Size (mm)  : 560Tie Bar Distance Horizontal (mm) : 410

Arburg 270 S 250-60 (2004)Clamping Force: 25 tTie Bar Spacing: 270 mm × 270 mmPlaten Dimensions: 400 mm × 400 mmMax. Mold Opening Stroke: 275 mmMin. Mold Height: 198 mmMax. Daylight: 279 mmEjector Stroke: 95 mmMold Opening Force (Max.): 14 kNMachine Dimensions (W × D): 1250 mm × 3800 mmMachine Weight: Approximately 1900 kgScrew Diameter: 22 mmStroke Volume: 39 cm³Injection Pressure: 1810 barInjection Flow (2 Pumps): Up to 8.1 cm³/sMaterial Throughput (PS): Up to 22.0 kg/hYear of Manufacture: 2004Type: Hydraulic Injection Molding Machine

Arburg 820 S 4000-3200 (2005)Clamping Force: 400 tonScrew Diameter: 90 mmShot Weight: 1860 gInjection Volume: 2036 cm³Injection Pressure: 1580 barOpening Stroke: 700 mmDistance Between Tie Bars: 820 × 820 mmMould Height Min/Max: 350 – 850 mmOpening Width: 1050 – 1550 mmPlaten Size (h × v): 1171 × 1171 mmMachine Dimensions (L × W × H): 8,3 × 2,3 × 2,4 mMachine Weight: 22 500 kgWorking hours : 79.000

• Clamping Force: 80 tons (800 kN) • Screw Diameter: 35 mm • Shot Weight (PS): 165 grams • Tie Bar Spacing (H × V): 420 mm × 420 mm • Opening Stroke (Max): 450 mm • Minimum Mould Height: 250 mm • Maximum Daylight (Platen Distance): 700 mm • Control System: Selogica • Power Consumption: 29.9 kW • Machine Dimensions (L × W × H): 5,200 mm × 1,600 mm × 2,200 mm • Machine Weight: 3,800 kg

Chen Hsong SM4500-TP (2013) Supermaster Servo drive seriesClamping force: 4500 tScrew diameter: 250 mmShot weight: 61166 gDistance between tie bars V: 2100 mmDistance between tie bars H: 2430 mmOpening stroke: 2300-3400 mmShot volume: 67216 cm3Max daylight: 4500 mm

Engel INSERT 330H/90Controll: CC100 Condition: funtional Vertical machine with Horizontal injectionRotary table diameter: 1100mmClamping force: 90 tonOpening max. : 570Opening min. : 270Platen size: 590x340Screw: 40 mmScrew length: 160 mmInjection volume: 201 cm3Injection pressure: 1230 barMotor: 15 kwWeight: 5600 kgHeight 2800 mm

Engel victory 200/50 spex (2010)CC200Clamping force: 50 tScrew diameter: 35 mmType: HorizontalDrive: HydraulicHours: 56000

Weight 52 kgPicker from IMM Engel Victory 80/50 Spex

Clamping Force: 60 tons (600 kN)Injection Unit Orientation: VerticalRotary Table: IncludedScrew Diameter: Approximately 35 mmShot Size: Around 4.4 oz (125 g)Injection Pressure: Up to 210 barInjection Speed: Approximately 139 mm/sMould Opening Stroke: 305 mmEjector Stroke: 106 mm

Arburg 520 TV 1300-350 (2004)Clamping Unit:Clamping Force: 1,000 kN (100 tonnes)Opening Force: 115 / 300 kNOpening Stroke: 300 mmMaximum Distance Between Platens: 600 mmMinimum Mould Installation Height: 300 mmTie Bar Spacing: 1,300 mmMaximum Weight of Movable Mould Half: 500 kgEjector Force: 45 / 175 kNEjector Stroke: 150 mm  Injection Unit:Screw Diameter: 40 mmInjection Volume: 230 cm³Injection Pressure: 1,670 bar

Clamping force: 110 tScrew diameter: 22 mmShot volume: 41 cm3Screw L/D ratio: 20Calculated stroke volume : 41,8 cm3Correct injection pressure : 2,864 barMax. screw speed : 500 minScrew tongue : 150 NmNozzle path contact force : 250/40 mm/kNInjection flow outside : 76 cm3/sCylinder heating capacity : 6,3 kWNumber of heating zones : 4Working hours: 35.953 hours Type: HorizontalDrive: Electric

Netstal S-1500-460 (2003)Clamping force - 150 tScrew diameter - 45 mmHours - 79.000