gear cutting and hobbing machines used for sale (196)

Qty. 1 Second-hand Slab Surface Scalper Mfc.: TBA Built: 1972 Scalped Slab Dimensions: 1000-3000 x 740-2000 x 180-350 mm – L x W x T Main Drive Electric Motor Power: 250 kW, 380 V, 735 RPM Scalping depth at once: 4-5 mm Capacity: Average 7 tons/h (For 1040 mm width slab)

industrial furnace Uterna 2x2x2m 650C auto door PLC

Key data: 540

The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies, for the process of noise and contact pattern tests on bevel gears and hypoid gears. Technical data Diameter: 540 (400) mm Hypoid: ±50 mm mm Pinion spindle Dm: 90 mm mm Dimensions: 1,800 x 1,800 x 1,600 m Machine weight: approx. 2,800 kg Information and data are non-binding, subject to prior sale Special features: The machine is intended for noise and contact pattern tests on bevel and hypoid gears of all gears. By simulating operating conditions, applying different speeds and changing the load states for drive and outlet, the optimal installation distance for standstill can be determined. Digital actual value display for 2 axes Stepless speed adjustment via frequency converter Electrically fused and acceptabl ...

Key data: 450

The Klingelnberg PEK 300 H bevel gear testing machine is designed for universal single-flank rolling testing of bevel gears and crown gears. Here, gears can be measured and graphically evaluated by means of single-flank rolling testing. These test methods are particularly suitable for determining defects in the gear geometry such as concentricity and axial running properties, rolling deviations or pitch errors. Here, a practical installation situation of a gear outside the gearbox is simulated under real load conditions and then evaluated. Deviations in the gear geometry, machining errors due to defective tools and damage to the gears can thus be detected and eliminated even before assembly. The following parameters can be measured here: » Single-flank deviations Fi', fi', fl', fk' » Crossing, Runout Roundness (Option) » Carrying diagram with digital camera »  ...

max. wheel diameter: 1000 mmgear width: 630 mmmax. module: 16 min. module: 1 wheel diameter with counterstay: 800 mmmax. number of teeth: 999 clamping length: 1060 mmworkpiece weight: 1500 kgmax.helical angle: 45 °grinding spindle drive: ca. 20 kWControl: Opal / Siemens total power requirement: 70 kWweight of the machine ca.: 17,5 t- CNC control Opal / Indramat with Siemens S5 PLC- paperbandfilter- oil mist exhauster- complete coveringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 630 mm, 8

Max. outer diameter (gear): 630 mm Max. inner diameter (gear): approx. 750 mm Max. tooth width: 180–200 mm Max. module: 8 Shock stroke: up to 220 mm Stroke rate: 47–300 strokes/min Tool holder: MK 4 Drive power: approx. 8 kW Total connected load: approx. 10–12 kW Njbmsww Er Hompw Spjwk Machine weight: approx. 5,500–5,800

Key data: 630 mm, 8

A used gear pusher Lorenz S8/630 with interchangeable wheels.

x-travel: 900 mmy-travel: 300 mmz-travel: 1000 mmcontrol: Siemens Sinumerik 840D max. workpiece diameter: 1600 mmmax. module: 20 mmtip circle diameter: 350 mmMilling arbour diameter: 375 mmTotal closing value: 80 kVaweight of the machine ca.: 33,5 tdimensions of the machine ca.: 10,530 x 6,375 x 4,680 mFeed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/minSpindle speeds in rpm: - Tool 26 to 265 - Workpiece table 0 to 8Equipment/accessories: - M 2 motor milling head - Milling mandrels - Oil cooler - Technical documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 500 mmHypoid adjustment: ±70 mmaxial cross angle: 90 °Distance Y-: 150 - 350 mmDistance Z-axis: 120 - 340 mmturning speed range - stepless: 0 - 5000 U/minmax. torque on the spindle: 57 NmCone: 99,2 mmPull-in force Tool clamping: 23000 NBraking torque max.: 93 Nmtotal connected load: 20 kVAtotal power requirement: 15 kWweight of the machine ca.: 6 tdimensions of the machine ca.: 2,35 x 2,24 x 2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ratio of transmission: 10:1 min. number of teeth: 3 max. number of teeth: 200 range of tooth size: 20 mmtooth width max.: 58 mmspindle speeds (infinitely variable): 6000 U/minwork piece spindle speed: 1200 U/mindiameter of tools max.: 230 mmdiameter of tools min: 69,85 mmx-axis: 325 mmy-axis: 350 mmz-axis: 470 mmb-axis: + 90,1 / - 1 °work piece table - Ø: 212,71 mmControl: SIN 840 D SIEMENStotal power requirement: 75 kWweight of the machine ca.: 10.000 Kgdimensions of the machine ca.: 6,10 x 4,40 x 3,30 mcoolant filtering unit Hoffmann HSF 100 VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: --- mmgear width: --- mmmax. module: --- min. module: --- total power requirement: --- kWweight of the machine ca.: --- tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 100 mmgear width: 26 mmmax. module: 31 min. module: 0,1 Control: Siemens 840 D SLtotal power requirement: 45 kWweight of the machine ca.: 7 tdimensions of the machine ca.: 4x3x2,5 mGleason 100S gear shaping machinefor the production of internally and externally toothed cylindrical gears andother cylindrical workpiece circumference regularly occurringprofiles and moulds as well as for the production of profiles using thesingle part process.Technical data:Nominal workpiece diameter 100 mmLargest circumferential diameter 150 mmMachine nominal module approx. 3 mm(Guide value depending on the respective machining task.)Shaping spindle stroke speed range 0 - 3,000 1/minStroke position adjustment range (manual) 20 mmLargest toothing width 26 mmSmallest pitch height of the hydrostaticinclined guide 400 mmSmallest/largest distance between tool axis - 20/+ 180 mmand workpiece  ...

max. wheel diameter: 180 mmgear width: 45 mmmax. module: 4 min. module: 0,5 stroke length max.: 0 - 52 mmspindle taper: innen MK 4 table diameter: 160 mmtable bore diameter: 75 mmno. of strokes: 355 - 630 Hub/minfeed range: 0,008 - 0,4 mm/Hubdimensions of the machine ca.: 2,30 x 1,50 x 2,36 mpower capacity: 6 kWweight of the machine ca.: 2.500 kgYear of construction: Approx. 1970The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 900 mmgear width: 500 mmmax. module: 1 min. module: 10 total power requirement: 16 kWweight of the machine ca.: 8.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hobbing length: 1750 mmmilling width: 260 mmmax. module: 10 min. module: 12 total power requirement: 8 kWweight of the machine ca.: 4500 kgdimensions of the machine ca.: mD O N A U - K N A P P (Germany)Universal Automatic Rack Milling MachineModel UZFM – V 300 H Year approx. 1980 Serial No. 80-234xMax. length of rack 1,750 mmMilling travel / milling width cross max. 260 mmModule, steel / cast iron 10 / 12Table clamping size 275 x 1,850 mmMounting height below cutter, depending on cutter Ø 136 – 410 mmCutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mmCutter width max. floating / with support 50 / 140 mmCutter mandrel Ø max.  ...

max. wheel diameter: 80 mmgear width: 120 mmmax. module: 3 min. module: 1 control: SIEMENS 840 C total power requirement: 30 kWweight of the machine ca.: 7500 tdimensions of the machine ca.: mL I E B H E R RCNC – Controlled Gear Hobbing MachineType LC 82Baujahr 1995 Ser.-Nr. 0836______________________________________________________Gear-Diam. max. 80 mmModule Range 1 - 3 Helix Angle +/- 45 °Distance Table Center to Tool Center 15 – 160 mmHobbing Head Slide stroke vertical 250 mmTangential Travel / Shift Travel of Tool slide 180 mmMinimum Number of Teeth 3 (!)Hob Size max. Ø x length approx.  ...

max. wheel diameter: 400 mmgear width: 280 mmmax. module: 1 min. module: 4 total power requirement: 15 kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 80 mmgear width: 150 mmmax. module: 2,5 min. module: total power requirement: 10 kWweight of the machine ca.: 2400 kgM I K R O N (Switzerland)Fully Automatic Gear Hobber for Worm GearsModel A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15_____________________________________________________ _______max. gear- without feed magazine approx. 80 mmmax. gear- with feed magazine approx. 50 mmModule max. 2, / 2,5 Axial milling length approx. 150 mmmax. workpiece-mounting length approx. 200 mmMilling slide can be swivelled up to 90 degreesMilling cutter - 24 - 50/63 mmMax. radial distance of milling slide 0-14/18 mmMilling cutter adjustment max. 25 mmMilling cutter speed 212 - 2.000 rpmAxial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation  ...

Under power , complete

Pfauter RS 2 With accessories

Kapp Model AST 203 Hob sharpening machine

Klingelnberg ZW 301 Gear Measuring Machine Weight 750 kg

Gear hobbing machine horizontal Pfauter P160 With accessories

Gear hobbing machine vertical Pfauter P251 With accessories

Thread milling and hobbing machine Wanderer 31 NU Machining length 3000 mm With accessories

Gear Hobbing Machine Pfauter P 400 With interchangeable wheels 

Reishauer RZ 362A Built in 1999 Accessories: 2x Fässler dressing device Diamond Wheels Whetstones Turbo separator

max. wheel diameter: 400 mmgear width: 275 mmgear width: 275 mmmax. module: 6 weight of the machine ca.: 5,5 tshifting: 100 mmdist. cutter spindle - workpiece spindle: 40/265 mmhob turning speeds: 50-400 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mmgear width: 275 mmmax. module: 6 Overall size: 300x330x245 cmweight of the machine ca.: 5,5 tdist. cutter spindle - workpiece spindle: 40/265 mmhob turning speeds: 50-400 U/minSpecification:Max wheel diameter: 400 mmMin module: 1Max module: 6 Table diameter: 370 mm Max wheel diameter: -With counterstay: 340 mm -Without counterstay: 400 mmMax axial offset: 275 mmMax tangential adjustment: 100 mmTooth helical angle: 45 degreesMax cutter diameter: 145 mmMax hobbing length: 170 mmHob turning speeds capacity: 63-180 U/minFeeds infinitely variable axial: 0,2-10 mm/UFeeds infinitely variable tangential: 0,1-5 mm/URadial for spur gears: 0,1-4 mm/URadial for worm gears: 0,025-1 mm/URapid traverse axial: 500 mm/minRapid traverse tangential: 250 mm/minRadial for spur gears: 400 mm/URadial for worm gears: 100 mm/UMotor power: 7.4 kWThe data for this ad was created with Mod ...

Max. Pitch circle diameter External gearing: 300 mmMax. Pitch circle diameter internal gearing: 300 mmMax. Outer diameter of workpiece (equipment): 450 mmmax. module: 6 gear hobbing width -max.: 100 mmMax. Helix angle (with tool Ø 125 mm): +/- 45 °strokes - infinitely variable: 130 - 1300 Hub/minworkpiece weight: 1000 kgMinimum distance table top - tool spindle: -55 / +300 mmMaximum distance table top - tool spindle: 200 mmMaximum distance table top - tool spindle: 350 mmManual Upright side shift: +/- 25 mmManual swivelling angle of the tool spindle: +/- 0,5 °Max. Tool speed: 15 UpMMax. Workpiece speed: 27 UpMMax. Tool diameter: 7 Zollvoltage: 400 Vfrequency: 50 HzMax. Line power: 70 Atotal power requirement: 48 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 4,27 x 3,11 x 2,87 mcontrol: Siemens Sinumerik 840 C table hole: 40 mmtaper in main spindle: SK 45 Gleason PFAU ...