gear cutting and hobbing machines used for sale (215)

KOEPFER 153 Gear Hobbing machine Cutting diameter with loader 80 mm Cutting diameter without loader 142 mm Max. module 2 Cutting length 150 mm Workpiece length 300 mm Workpiece length with loader 220 mm Miller dimensions 70 x 71 mm Miller rotation speed 280 -2240 rpm Head inclination +/- 35° Dimensions : 1690 x 1410 x 1640 mm Weight 3t

KOEPFER 151 Gear Hobbing Machine - Horizontal Available 2 machines. Semi-automatic machine Max. gear dia 150 mm Module 2 Max Profile depth / Plunge cut depth 7 mm Max hobbing length 135 mm Max length of workpiece, approx. 280 mm Hob slide swivable 250 degrees Hob size dia x length 65 x 60 mm Hob shifting, manually max. 40 mm Hob Spindle speeds 140 – 1120 rpm Workspindle bore 24 mm Bore of collet chuck, max. 3 – 24 mm Feed range, axial/plunge cut 0.06 – 2 mm/rev No. of teeth, min./max. 6 - 200 Spindle Drive/Total electrical load, approx. 2,2 / 4 kW Weight, approx. 1,400 kg Very good condition

Circulation cutter from Klingelberg

Planing comb to Maag gear planing machine

The machine is in good technical condition, testing is possible by prior arrangement.

The machine is in good technical condition, testing is possible by prior arrangement.

The machine is in good technical condition, testing is possible by prior arrangement.

The machine is in good technical condition, testing is possible by prior arrangement.

Max. workpiece diameter... 1000mm Module ... 10- Main engine power ... 7.5kW L x W x H ... 3120 x 1870 x 2525mm Machine weight ... 10000kg

Max. wheel diameter: 1600 mm Min. disc diameter: 800 mm Gear width: 560 mm Max. module: 16 Minimum module: 4 Table diameter: 1350 mm Table load capacity: 7000 kg Machine weight: approx. 18 tons Machine connected, can be tested. Machine equipped

I am selling this machine. Plugged in, can be tested. We can send a video of the machine via WhatsApp. The machine is well equipped Horizontal Gear Hobbing Machine Kolomna model 5B370. YOM – 1974. Max.working diameter- 500 mm; Max. module - 20; Max.workpiece lenght- 3 000mm; Very good working condition. Main technical data: Max working diameter:500 mm; Max diam. of workpiece:900 mm; Max workpiece length:3000 mm; Max modul of workpiece, mm: -by hobbing cutter 20; -by disk cutter 25; Max tilt angle:+45; Max weight of workpiece: 4000kg; Max diam. of hobbing cutters: 300mm; Max length of hobbing cutters:400 mm; Axial feeding: 0,02-575mm/min; Radial feeding: 0,36-7,1mm/min; Overall dimensions, mm: -length: 10770; -width: 4070; -height: 2580; Weight: 27100 kg.

I am selling this hobbing machine. Plugged in, can be tested. Many accessories. Technical parameters: Max. wheel: 7100 mm Gear wheel width: 1500 mm Max. module: 45 Table diameter: 4000 mm Cutter diameter x width: 400 x 500 mm Max. helix angle: 45 degrees Planer diameter: 500 mm Planer speed: 9–63 rpm Total power consumption: 47 kW Weight: 160,000 kg

Inv. Num. : 7890 Type: Coex 3-layers Producer: MAM Created: 2005 Parameters: Film width: 440-600 mm Circumference of the balloon: 1200 mm Maximum speed: 30 m/min Cutting thickness: 0.060-0.200 mm

[ 5000 characters max., no information about the advertiser ] Brand:MODUL Model:ZFWZ 2000/3 Type:Gear Hobbers Year:1981 Location:Czech Republic Specification: Max diameter of gear without tailstock 2100 mm Max diameter of gear with tailstock 1450 mm Max face of gear 1060mm Max module with hobbing head 22 Max/ Min center distance 1240/150 mm Min number of teeth 10 Max pressure angel 45 deg Table dia / number of slots 1800 mm/12 Bore in table / length 600/800 mm Max dia of hob / length 300/330 mm Max weight of workpiece 15000 kg Accessories: Standard milling head Tailstock (no clamping) Set of gear supports (shoes) Set of arbors Set of change gears

SH75 max. wheel diameter 750 mm gear width 200 mm max. module 10 min. module 1 min. wheel diameter 30 mm max. number of teeth 300 min. number of teeth 6 tooth helical angle min/max 0 / 60 ° min. ram stroke 0 mm max. ram stroke 225 mm table diameter 500 mm table load 0,8 t no. of strokes 23,5 - 150 Hub/min table hole 90 mm total power requirement 7 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2,1 x 1,7 x 2,1 m

Complete production line for bevel gears, consisting of 6 bevel gear milling machines Klingelnberg BF 201 including orders for contract work for sale Technical data Diameter: 240 mm Module: 10 mm Tooth width: 60 mm Dimensions: 2.3 x 2 x 1.7 m Machine weight: approx. 6,700 kg Information and data are non-binding, subject to prior sale Special features: Complete production line consisting of 6 machines with the following accessories: - Bevel gear machine - 1x interchangeable gear set - 1x test block - Mounts (proportionate) - Knife set (proportionate) - Documentation (1xOriginal / data set) Furthermore, contract gear orders could follow, catalogue goods and special bevel gear sets according to customer specifications, complete volume approx. 8,000 components / year. Asking price of the seller 18.000.- VB / per machine

Key data: 540

The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies, for the process of noise and contact pattern tests on bevel gears and hypoid gears. Technical data Diameter: 540 (400) mm Hypoid: ±50 mm mm Pinion spindle Dm: 90 mm mm Dimensions: 1,800 x 1,800 x 1,600 m Machine weight: approx. 2,800 kg Information and data are non-binding, subject to prior sale Special features: The machine is intended for noise and contact pattern tests on bevel and hypoid gears of all gears. By simulating operating conditions, applying different speeds and changing the load states for drive and outlet, the optimal installation distance for standstill can be determined. Digital actual value display for 2 axes Stepless speed adjustment via frequency converter Electrically fused and acceptabl ...

Key data: 450

The Klingelnberg PEK 300 H bevel gear testing machine is designed for universal single-flank rolling testing of bevel gears and crown gears. Here, gears can be measured and graphically evaluated by means of single-flank rolling testing. These test methods are particularly suitable for determining defects in the gear geometry such as concentricity and axial running properties, rolling deviations or pitch errors. Here, a practical installation situation of a gear outside the gearbox is simulated under real load conditions and then evaluated. Deviations in the gear geometry, machining errors due to defective tools and damage to the gears can thus be detected and eliminated even before assembly. The following parameters can be measured here: » Single-flank deviations Fi', fi', fl', fk' » Crossing, Runout Roundness (Option) » Carrying diagram with digital camera »  ...

Very little walked, Control: conventional, Lubricants: cutting oil, Miscellaneous accessories: HDT & GT hobs, Recordings etc.

gear hobbing diameter - external: 1200 mmgear hobbing diameter - internal: 1200 mmgear hobbing width -max.: 260 mmcontrol: Liebherr PC-NC max. workpiece diameter: 1500 mmtable diameter: 900 mmtable bore diameter: 320 mmmax. table load: 95 kNpower capacity: 30 kWcoolant pump: 120 l/minAxial distance between thrust spindle - table: 0-820 mmShaping spindle diameter: 125 mmtool taper: SK 45 DIN weight of the machine ca.: 26 tdimensions of the machine ca.: 8,073 x 6,183 x 4,375 mStrokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/minEquipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tip circle diameter: 650/800 mmworkpiece length - max.: 1100 mmmax. module: 20 (25) mmmin. module: 0,5 mmcontrol: Siemens Sinumerik 840 D total connected load: 62 kVAhelical angle: -45 / + 120 °weight of the machine ca.: 10 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1000 mmgear width: 630 mmmax. module: 16 min. module: 1 wheel diameter with counterstay: 800 mmmax. number of teeth: 999 clamping length: 1060 mmworkpiece weight: 1500 kgmax.helical angle: 45 °grinding spindle drive: ca. 20 kWControl: Opal / Siemens total power requirement: 70 kWweight of the machine ca.: 17,5 t- CNC control Opal / Indramat with Siemens S5 PLC- paperbandfilter- oil mist exhauster- complete coveringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1250 mmgear width: 430 mmmax. module: 30 min. module: 2 no. of teeth: 10 - 400 max.helical angle: 45 °Stößelhublänge: 25 - 450 mmstroke position adjustment: 310 mmDoppelhubzahl - stufenlos: 70 - 190 U/mingrinding wheel diam. min/max.: 290 - 400 mmtable diameter: 1000 mmtable load: 4000 kpdimensions of the machine ca.: 7,7 x 4,5 x 3,3 mtotal power requirement: 30 kWweight of the machine ca.: 28 t- Complete covering- Oil mist extraction- Coolant system- counter Holder- change Gears- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 630 mm, 8

Max. outer diameter (gear): 630 mm Max. inner diameter (gear): approx. 750 mm Max. tooth width: 180–200 mm Max. module: 8 Shock stroke: up to 220 mm Stroke rate: 47–300 strokes/min Tool holder: MK 4 Drive power: approx. 8 kW Total connected load: approx. 10–12 kW Njbmsww Er Hompw Spjwk Machine weight: approx. 5,500–5,800

Key data: 630 mm, 8

A used gear pusher Lorenz S8/630 with interchangeable wheels.

max. wheel diameter: 630 mmgear width: 215 mmmax. module: 12 min. module: 1 number of teeth: 5 - 140 stroke length max.: 225 mmtable diameter: 500 mmtable load: 400 kpgrinding wheel diam. min/max.: 270-350 mmmax.helical angle: 45 °no. of strokes: 75 - 315 p.M.total power requirement: 8,5 kWweight of the machine ca.: 6,3 tdimensions of the machine ca.: 3,2 x 3,6 x 3,7 mchange gears,program control,complete covering,coolant/Filtering attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 900 mmy-travel: 300 mmz-travel: 1000 mmcontrol: Siemens Sinumerik 840D max. workpiece diameter: 1600 mmmax. module: 20 mmtip circle diameter: 350 mmMilling arbour diameter: 375 mmTotal closing value: 80 kVaweight of the machine ca.: 33,5 tdimensions of the machine ca.: 10,530 x 6,375 x 4,680 mFeed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/minSpindle speeds in rpm: - Tool 26 to 265 - Workpiece table 0 to 8Equipment/accessories: - M 2 motor milling head - Milling mandrels - Oil cooler - Technical documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 780 mmgear width: 130 mmmax. module: 8 / 10 table diameter: 510 mmtable bore diameter: 160 mmnumber of strokes (double strokes): 30 - 1500 DH/minControl: Siemens Sinumerik 3 distance table - lower edge of ram: 650 mmtable-size: 500 mmtotal power requirement: 36 kVAweight of the machine ca.: 8,5 tdimensions of the machine ca.: 4,9 x 3,65 x 3,8 mThe machine is suitable for:- Internal and external gear teeth in small quantities- Internal gear teeth in blind holes (non-through holes)- External gear teeth without run-out, as hobbing would not be possibleExamples of components are: Internal gear rings for planetary gears, drive shafts, clutch hubs...- Siemens Sinumerik 3 CNC control- Chip conveyorMachine was only used sporadicallyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 500 mmHypoid adjustment: ±70 mmaxial cross angle: 90 °Distance Y-: 150 - 350 mmDistance Z-axis: 120 - 340 mmturning speed range - stepless: 0 - 5000 U/minmax. torque on the spindle: 57 NmCone: 99,2 mmPull-in force Tool clamping: 23000 NBraking torque max.: 93 Nmtotal connected load: 20 kVAtotal power requirement: 15 kWweight of the machine ca.: 6 tdimensions of the machine ca.: 2,35 x 2,24 x 2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 500 mmgear width: 125 mmmax. module: 8 ram stroke range: 135 mmmax.helical angle: 41 °table diameter: 500 mmno. of teeth: 12 - 300 total power requirement: 7,5 kWweight of the machine ca.: 6 t2021 completely overhauled and equipped with controls and new motors.suitable for internal & external gear shapingwith:- Control unit- chip conveyor- coolant- change gearsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.