engines used for sale (1,722)

approx. 17 kw/23 hp 2-cylinder diesel engine, water-cooled, complete engine with starter, alternator and gear hydraulic pump. Also available: Isuzu 3 AB 1 – B 02, 3 cyl., 25 kw/34 hp as well as various parts ex Isuzu 3 KC1 Diesel engines 1-6 cyl., various makes: Deutz, Daedong, Farymann, Hatz, Iseki, Isuzu, Komatsu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Output from 4.5 – 100 kw, used, partly as good as new.

Key data: 625 KW, 2 1/min

2x Jenbacher gas engines JMS 312 built in 2008, with brand new generator, exhaust gas heat exchanger next to the engine, additional oil tank. No NOX control. Modules are stored and preserved, location Schleswig, Holstein, modules immediately available, ideal as exchange modules in the event of inspections or fire damage.

Key data: 55 KW, 300 1/min

Herford engine, 1-cylinder, horizontal, 300 rpm, 75 hp, overhauled

URACA 690 bar

Key data: 38 KW, 2100 1/min

Scania DC13-313A AT engine completely overhauled only in exchange on request with starter, light nose + belt drive. Engine is completely overhauled ready for installation with 12 months warranty. Old engine must come back to us within 14 days without breakage, cracks and repairable.

Key data: 89 KW, 1900 1/min

Diesel engine used, with gearbox ZF220 1.5:1 reduced Volvo Penta D5A-B TA identical to Deutz BF4M1013

Key data: 195 KW, 2300 1/min

Used diesel engine Deutz BF6M1013 MC identical to: Volvo Penta D7C-B TA

Key data: 195 KW, 2300 1/min

Used diesel engine Volvo Penta D7C-B TA identical to Deutz BF6M1013 MC

Key data: 75 KW, 300 1/min

Herford engine, diesel heavy oil engine, 1 cylinder, horizontal piston 75 hp 300 rpm, engine was completely overhauled by Fachwerkstatt Schenkluhn, collector's item

Key data: 1600 KW, 1500 1/min

Dear Ladies and Gentlemen, We have 2 engines MTU 16V4000 Diesel 1600KW 1500 rpm We have another 2x MTU 20V4000 Diesel 2420KW 1500 rpm Operating hours 260 only and have been regularly serviced. If you have any questions or details, please do not hesitate to contact us. Best regards, Schmidt Mobile: 0172 72 653 24

Lot of Siemens electric motors

Key data: 18 KW, 13 1/min

Infinitely adjustable variator motor with belt variator

Key data: 225 KW, 1500 1/min

Scania engine DC09-63A fuselage engine from Schnell CHP completely overhauled in exchange. Old engine must be break-free and crack-free + repairable. MIW Motoren-Instandsetzungs-Werk GmbH Nord-West-Ring 8 D-27404 Zeven Germany Phone: 0049 4281 950583 infoatmiw-zeven

Key data: 337 KW, 1500 1/min

New engine block Scania DI/DC12 with OE number 2055383 at special net price Net/piece 12.595€ Price is subject to VAT Gross price: 17.381€ MIW Motoren-Instandsetzungs-Werk GmbH Nord-West-Ring 8 D-27404 Zeven/Germany Phone:0049(0) 4281-950583

Commonrail Pump Used from experimental setup. Few hours

INDRAMAT Permanent Magnet Three-phase Servo Motor

INDRAMAT Permanent Magnet Three-phase Servo Motor

INDRAMAT Permanent Magnet Three-phase Servo Motor

Key data: 13 KW

Manufacturer: Rexroth Model No.: MHD112C-035-PG3-BN 4000 min-1 Part No. 294649 IP: 65 13.3 kW 48 kg More engines new and used - you can find them in our shop! International shipping costs on request!

Key data: 1067 KW

we are looking for a Jenbacher 3 1067 kw we have a biogas plant

We sell a used Volvo engine TWD1211P as a spare parts carrier, The block has a hole, cylinder head , piston , Injection pump, etc. good

Fanuc Engine comes from an X-axis milling machine

Siemens Motor 1 FT 5102 0A C01-Z see nameplate

Key data: 626

Pro2 container unit with 626kW el. Performance for power generation - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TBG 616V16K - 626kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GCB - Current Bh number only exactly 90.000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling water circuit, designed for the c ...

Key data: 451 KW, 1500 1/min

Year of manufacture 10/2020, engine in running condition and has only a slight leakage at the oil pan. A total of 11,000 operating hours.

Turbocharger for MTU Engine 4000 Series Unused from stock. There are several Different Types

1 pc. used worm drive motor - 5 cyl. radial piston motor ex Küpper-Weiss automatic spreader. Engine has run until the spreader is retired, sold as an untested spare parts carrier. More used parts as well as used winter service technology in stock - see example photos! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal, environmental maintenance, engines and more...

MWM TCG 2020 V 20 Remanufactured Motor / Short Block It is a refurbished short block. Repaired in accordance with the manufacturer's guidelines and the RAL seal of approval. Circumference: - Crankcase incl. new bearings - Crankshaft (Std-dimension) incl. new bearings - Camshafts incl. new bearings - Wheel drive incl. wheel box cover - Flywheel housing - Oil pump with oil suction pipe -Sump - Valve tappets - Oil pressure valve On request, the scope can be expanded (e.g. pistons, liners, cylinder heads, oil coolers, etc.) Further information on the scope and design can be found on our homepage: buecker-essing Removal and installation as well as service for the engine and CHP unit are optionally possible. Please contact us for a written offer. We also have other remanufactured engines, as well as AT cylinder heads, turbochargers, spare parts and othe ...

MWM TCG 2020 V 16 Remanufactured Motor / Short Block It is a refurbished short block. Repaired in accordance with the manufacturer's guidelines and the RAL seal of approval. Circumference: - Crankcase incl. new bearing - Crankshaft (Std-dimension) incl. new bearings - Camshafts incl. new bearings - Wheel drive incl. wheel box cover - Flywheel housing - Oil pump with oil suction pipe -Sump - Valve plunger - Oil pressure valve On request, the scope can be expanded (e.g. pistons, liners, cylinder heads, oil coolers, etc.) Further information on the scope and design can be found on our homepage: buecker-essing Removal and installation as well as service for the engine and CHP unit are optionally possible. Please contact us for a written offer. We also have other remanufactured engines, as well as AT cylinder heads, turbochargers, spare parts and other ...

Side channel blowers See nameplate, All 8 are the same!