Numerically Controlled Machining Centres DMG DMC 80 H

X-travel: 500 mm Y-travel: 710 mm Z-travel: 710 mm IntNr231113
Warentarifnummer / Goods tariff number 8457 10 10 00
Horizontal machining center
Manufacturer: DMG Deckel Maho
Type: DMC 80H hi-dyn. RS4 with 2-fold plate changer and pallets Station 4 stations
NC rotary table 360°
Accuracy Package
Tool holders
Steep cone: HST 100 DIN 69893 Form A
Tool magazine positions chain: 1 x 90 & 1 x 90
Chip conveyor including belt filter from Knoll
BILUTEC Air Technology – Filtration Systems
Machine number: 28840003102
Year of Make: 2001
Control: Siemens Sinumerik 840D
Operating hours: approx. 83,500 h
Specifications
Specifications
Main drive
• Direct drive by liquid-cooled, speed-controlled induction motor
• Speed ranges, infinitely programmable:
o Operating mode: 0 to 6,000 rpm
o Setup mode: 0 to 800 rpm
o Manual intervention: 0 to 5,000 rpm
•Torque:
o S1 – 100% duty cycle: max. 300 Nm (220 lb-ft)
o S6 – 40% duty cycle: 440 Nm (322 lb-ft) max
•Achievement:
o S1 – 100% duty cycle: 25 kW (33 hp)
o S6 – 40% duty cycle: 37 kW (49 hp)
Feed drive
• 3-phase AC synchronous servo motors
• Feed speed of the X/Y/Z axes:
o Infinitely programmable: 1 to 40,000 mm/min (0.04 to 1,575 in/min)
o Rapid traverse: 40,000 mm/min (1,575 in/min)
o Setup operation: 1 to 2,000 mm/min (0.04 to 79 in/min)
o Manual interventions: 1 to 5,000 mm/min (0.04 to 200 in/min)
• Feed force:
o X/Z axes (100% duty cycle): max. 15,000 N (3,372 lb)
o Y-axis (100% duty cycle): max. 10,000 N (2,255 lb)
System
• Resolution, smallest input step:
o X/Y/Z axes: 0.001 mm (0.0004 in)
• Position tolerance (according to VDI/DGQ 3441):
o Direct measurement of X/Y/Z axes: 0.010 mm (0.004 in)
o Direct measurement of the B-axis: 14 arc seconds
Roundtable
• Speed: max. 19 rpm
• Pallet clamping force: 120,000 N (27,000 lb)
• Tipping torque: max. 16,000 Nm (3,520 lb-ft)
• Tangential torque: max. 4,800 Nm (3,523 lb-ft)
Pallet
• Quantity: 1
• Size: 500 x 630 mm (19.7 x 24.8 in)
• Permissible load per pallet:
o When using 1 pallet: max. 500 kg (1,102 lb)
o When using 2 pallets: max. 900 kg (1,984 lb)
• T-slots:
o Number x width: 4 x 14 mm (0.16 x 0.55 in)
•Guideway:
o Number x Width: 1 x 14 mm (0.04 x 0.55 in)
Workspace
•Travel:
o Tool diameter larger than 200 mm (7.87 in):
o Tool diameter less than 200 mm (7.87 in):
o Asymmetrical travel range:
o X-axis: 800 mm (31.5 in)
o X-axis: +500/-400 mm (+19.7/-15.7 in)
 Y-axis: 710 mm (27.9 in)
 Z-axis: 710 mm (27.9 in)
 B-axis: 360°

Machine size:
4,600 x 2,400 x 2,700 mm
Machine weight:
10,500 kg

1x machine: L = 530 cm x W = 240 cm x H = 284 cm; M = 15,000 kg
1x control cabinet: L = 170 cm x W = 60 cm x H = 220 cm; M = 1,800 kg
1x chip conveyor: L = 520 cm x W = 50 cm x H = 150 cm; M = 750 kg
2x pallets with accessories: L = 80 cm x W = 60 cm; M = 500 kg
1x Euro pallet with hydraulic power unit
1x Euro pallet with some accessories
1x Euro pallet with covers: L = 200 cm x W = 100 cm
1x filter carrier: L = 240 cm x W = 80 cm x H = 200 cm; M = 500 kg
1x Tool magazine: L = 300 cm x W = 240 cm x H = 338 cm; M = 7,000 kg
1x rotary table: L = 330 cm x W = 300 cm x H = 220 cm; M = 4,500 kg

Delivery time at short notice by arrangement.

The machine can be viewed by appointment.
Changes and errors in the technical data and specifications as well as prior sale reserved!

Horizontal machining center
Manufacturer: DMG Deckel Maho
Type: DMC 80H hi-dyn. RS4 with 2-fold plate changer and pallet station 4 stations
NC rotary table 360
Accuracy package
Tool holders
Steep taper: HST 100 DIN 69893 Form A
Tool magazine positions Chain:1 x 90 & 1 x 90
Chip conveyor Including belt filter from Knoll
BILUTEC Lufttechnik – Filtration systems
Machine number: 28840003102
Year of manufacture: 2001
Control: Siemens Sinumerik 840D
Operating hours: approx. 83,500 h
Machine specifications
Technical specifications
Main drive
– Direct drive by liquid-cooled, speed-controlled induction motor
– Speed ranges, infinitely programmable:
o Operating mode: 0 to 6,000 rpm
o Set-up mode: 0 to 800 rpm
o Manual intervention: 0 to 5,000 rpm
– Torque:
o S1 – 100% duty cycle: max. 300 Nm (220 lb-ft)
o S6 – 40% duty cycle: max. 440 Nm (322 lb-ft)
–Power:
o S1 – 100% duty cycle: 25 kW (33 hp)
o S6 – 40% duty cycle: 37 kW (49 hp)
Feed drive
– 3-phase AC synchronous servomotors
– Feed speed of the X/Y/Z axes:
o Infinitely programmable: 1 to 40,000 mm/min (0.04 to 1,575 in/min)
o Rapid traverse: 40,000 mm/min (1,575 in/min)
o Set-up mode: 1 to 2,000 mm/min (0.04 to 79 in/min)
o Manual operations: 1 to 5,000 mm/min (0.04 to 200 in/min)
– Feed force:
o X/Z axes (100% M5857993 duty cycle): max. 15,000 M5857993 N (3,372 lb)
o Y-axis (100% duty cycle): max. 10,000 N (2,255 lb)
Measuring system
– Resolution, smallest input step:
o X/Y/Z axes: 0.001 mm (0.0004 in)
– Position tolerance (according to VDI/DGQ 3441):
o Direct measurement of the X/Y/Z axes: 0.010 mm (0.004 in)
o Direct measurement of the B-axis: 14 arc seconds
Rotary table
– Speed: max. 19 rpm
– Pallet clamping force: 120,000 N (27,000 lb)
– Tilting moment: max. 16,000 Nm (3,520 lb-ft)
– Tangential torque: max. 4,800 Nm (3,523 lb-ft)
Pallet
– Quantity: 1
– Size: 500 x 630 mm (19.7 x 24.8 in)
– Permissible load per pallet:
o When using 1 pallet: max. 500 kg (1,102 lb)
o When using 2 pallets: max. 900 kg (1,984 lb)
– T-slots:
o Number x width: 4 x 14 mm (0.16 x 0.55 in)
– Guide groove:
o Number x width: 1 x 14 mm (0.04 x 0.55 in)
Working range
– Travel distance:
o Tool diameter greater than 200 mm (7.87 in):
o Tool diameter smaller than 200 mm (7.87 in):
o Asymmetrical travel range:
o X-axis: 800 mm (31.5 in)
o X-axis: +500/-400 mm (+19.7/-15.7 in)
 Y-axis: 710 mm (27.9 in)
 Z-axis: 710 mm (27.9 in)
 B-axis: 360°

Machine size:
4,600 x 2,400 x 2,700 mm
Machine weight:
10,500 kg

1x machine: L = 530 cm x W = 240 cm x H = 284 cm; M = 15,000 kg
1x control cabinet: L = 170 cm x W = 60 cm x H = 220 cm; M = 1,800 kg
1x chip conveyor: L = 520 cm x W = 50 cm x H = 150 cm; M = 750 kg
2x pallets with accessories: L = 80 cm x W = 60 cm; M = 500 kg
1x Euro pallet with hydraulic unit
1x Euro pallet with some accessories
1x Euro pallet with covers: L = 200 cm x W = 100 cm
1x filter carrier: L = 240 cm x W = 80 cm x H = 200 cm; M = 500 kg
1x tool magazine: L = 300 cm x W = 240 cm x H = 338 cm; M = 7,000 kg
1x rotary table: L = 330 cm x W = 300 cm x H = 220 cm; M = 4,500 kg

Delivery time at short notice by arrangement.

The machine can be inspected by appointment.
Changes and errors in the technical data and information as well as prior sale reserved!
seller offer No. resale 167203184