cranes used for sale (186)

1 factory-tested, very well preserved single girder crane angle load approx. 5,000 kg Wingspan approx. 10,000 mm Hook path about 7,500 mm Make steel Workshop examination 2016 Floor control equipped with angle trolley for optimal hook path, freely movable working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 4.0/16.0 m / min

1 factory-tested single girder overhead travelling crane lifting capacity 5000 kg Span around 10,000 mm Hook way max. 5.000 mm Make steel Year of production/workshop test 1983/2016 Crane equipped with steel monorail trolley, freely movable floor control Working speeds: Hoist 0.5/3.4 m / min Trolley gear 16.0 m / min Crane chassis 4.0/16.0 m / min

1 factory-tested, very well-preserved single-girder crane with angle trolley load approx. 4,000 kg Load trolley CA 5,000 kg Wingspan approx. 7.100 mm Make steel Year of production / workshop testing 1986/2016 Crane radio control equipped with angle trolley for a perfect hook road, Working speeds: Hoist 0.5/3.25 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min

1 factory-tested, well-preserved single-girder ceiling crane Load approx. 3,200 kg Wingspan approx. 6.280 mm Hook path about 12,000 mm Make DEMAG Year of production/workshop testing 1991/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min

1 factory-tested, very well-preserved single-girder crane Lifting capacity 3,200 kg Span approximately 6,000 mm hook path Max 12,000 mm Make DEMAG Year of production/workshop test 1993/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist CA. 1.0/6.3 m / min trolley gear approx. 14.0 m / min crane chassis 10.0/40.0 m / min

1 factory-tested ceiling crane girder Lifting capacity 3000 kg Wingspan approx. 6,800 mm Hook way approx. 8,000 mm Make MAN GHH Year of production/workshop testing 1988/2016 equipped monorail trolleys, short type, freely movable floor control Working speeds: Hoist around 0.8/8.0 m / min Trolley gear approx. 4.0/16.0 m / min Crane chassis approx. 8.0/32.0 m / min

Bridge crane for Ausseneinsatz Fabrikat steel - built 2007 Traglast 60 t - 16 m track width - height 8 m with enhances crane runway - completely screwed approx. 66 m long

1 factory-tested, well-preserved pillar jib crane Payload 1000 kg Projection about 6,360 mm Overall height approx. 3,350 mm Bottom bracket approx. 2,850 mm make of ABUS Workshop examination 2015 equipped with an electric chain hoist, floor operation on the boom moveable, and a new coat of paint Working speeds: Hoist around 1.0/4.0 m / min Trolley gear by hand rotation by hand The photos show a sample crane

1 factory-tested pillar crane Payload 1000 kg Reach 5,000 mm Height approx. 4,000 mm Bottom bracket 3,170 mm Make of ABUS Workshop examination 2015 Electric chain hoist, floor operation with a new coat of paint Working speeds: Hoist around 1.5 / 6.0 m / min Trolley gear by hand Slewing gear by hand

Load on the pivot around 41 t ISO container recording 10 / 20 / 30 / 40 foot Make: various renowned manufacturers Workshop review: 2015 various spreader: fix, telescoping, manually and with Tongs utensils for swap bodies Fully functional workshop overhaul and paint renewal upon request.

Load capacity up to 25,000 kg Grab content from 0.5 m² up to 4 m² Make: various renowned manufacturers workshop testing 2015 Fully functional workshop overhaul and paint renewal upon request.

Load capacity up to 12,500 kg Gripper content of 0.5 m³ up to 5 m³ Make: various renowned manufacturers workshop testing 2015 Fully functional workshop overhaul and paint renewal upon request.

Load capacity up to 12,000 kg Grab content from 1 m 3 up to 10 m³ Make: all reputable manufacturers workshop testing 2015 Fully functional workshop overhaul and paint renewal upon request.

Flat gear brake motor Gear motor Manufacturer: DEMAG Type: KBA112 B12/4 / KBA112B12 / 4 Detailed information on the manufacturers page, see pictures. Condition: New, can have traces of camp, comes from stock. Scope of delivery: see the pictures.

Knuckle Boom Crane Available – National Oilwell Varco (NOV) High-quality offshore lifting equipment ready for deployment: Make: National Oilwell Varco (NOV) Crane Type: Knuckle Boom Crane Model: OC2599KCE-15-25(18) Manufactured: 2011 Condition: Excellent Origin: Removed from FPSO vessel Safe Working Load (SWL) & Radius: • 1 Fall: 7.5T 25.4m • 2 Fall: 15T 24.9m ⚖️ Weight: 47.1T (excluding pedestal) Location: Europe Ideal for offshore, marine, and heavy lifting operations.

Overhead crane : 5 TN, length: 9.2 m, brand: Azpeitia Hermanos. MF-0097 Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Column-Mounted Crane DEMAG Capacity: 125 kg Arm travel: 3500 mm Height under hook: 2200 mm Total column height: 3150 mm Height under arm: 2700 mm With electric hoist In good condition Voltage: 380 V Weight: approx 250 kg

Manufacturer: Épgép STAHL Wingspan: 16.3 m Lifting height: 10 m Lifting capacity: 12.5 t Overall length: 16,300 mm Modernized, wired remote control, new 12.5 t carriage

Darusín 30 ton double girder bridge crane with 14 meter crane runway, columns manufactured by Darusín Kft, STREET. Year of manufacture: 2017. span: 9.1m lifting height: 7m crane runway length: 12.5 meters crane type: Street ZX1006 lifting speed: 1.3/0.3m /min travel speed: 20/2m /min voltage: 400v 50Hz 28A IP44 Control: 48 v with Crane Book

Jib Crane, Column-Mounted Crane, Column Jib Crane, Crane 250 kg, Used Machine Manufacturer: Abus Load Capacity: 250 kg Column Height: 2900 mm Reach: 2600 mm Hoist: Demag, Chain Hoist Type: DKUN 2-250 K V2 Load Capacity: 250 kg Lifting Height: 2600 mm IP Rating: IP 55

Make: Helia Model: HR 160/15-2BJ Built year: 2008 Condition: New / Unused Capacity: 3000 and 9000 kg Weight: 11,700 kg

TECHNICAL DATA: Single beam system Track width: 12.9 ml Lifting height: 6 m Lifting speed: 5.00/0.83 m/min Lifting force: 2 t Installed power: 2.7 kW Voltage: 380 V COMPLETE WITH: 06 masts: 5 m each 04 Crossbars/Travel Paths: 10.35 m each

Compact and reliable lifting solution for workshops and production environments The BPL Flexiheffer jib crane is an ideal solution for safely and efficiently moving loads up to 150 kg. The crane is designed for intensive daily use and offers a large working range thanks to the smooth jib arm. Technical Specifications Brand: BPL Type: Flexilifter 150‑R4‑L‑1500‑0 Year of construction: 2003 Height 2, 872 mm, width : 500 mm, length 1,878 mm Maximum lifting capacity: 150 kg, lifting stroke 1,500 mm Swing radius: 4,000 mm Construction: Steel column + swing arm Operation: Manual, smooth running Condition: Well-maintained, fully functional Connection: compressed air min. 6 bar, 700 NL/min Key Benefits Safe and ergonomic working with light to medium loads Compact design – ideal for workshops with limited space Smooth swivel movement for fast and accurate positi ...

Specifications will follow ASAP

Two pieces of lifting watches for use with indoor cranes without weight indication of the load

Payload: 1,300 kg Max. vacuum lifter: 4,000 x 2,000 mm Number of suction cups: 19 pcs. Dimensions LxWxH: 480 x 200 x 250 cm Weight: 1,400 kg

Wall swivel crane Payload 250 kg Lifting height 5,000 mm Extension 6,500 mm Hallway control Electricallifting/Lowering Lifting speed 10 /2.5 m/min. Connection 380 Volt

K-TECHNIK lifting beam was built by K-TECHNIK s.r.o. in the Czech Republic in 2024. The device is used for the safe lifting and transport of diverse loads weighing up to 4 tonnes. The combination of robust design with four hooks with fixed spacing makes it the perfect solution for cyclical work. The K-TECHNIK H lifting beam weighs 547 kg. Technical specifications of the K-TECHNIK lifting frame - maximum lifting capacity: 4000 kg - maximum lifting area (L x W): 4200 x 2750 mm - number of load hooks: 4 - device dimensions (L x W x H): 4860 x 2832 x 457 mm - K-TECHNIK device weight: 547 kg

TOC 900 kg vacuum lifter was built in 2021 in Poland by Przedsiębiorstwo HAK Sp. z o.o. The device, designed for lifting parts with a flat surface, is an irreplaceable tool in, among others, the handling of industrial machinery. An electricity-powered vacuum generator is located directly on its design, significantly reducing operating costs compared to pneumatically powered pumps. Furthermore, the OC-900 vacuum lifter is extremely versatile and can be mounted on the hook of any lifting device. Technical specifications of the TOC 900 kg vacuum lifter - maximum lifting capacity: 900 kg - maximum lifting area (L x W): 7000 x 2000 mm - minimum lifting area (L x W): 1000 x 500 mm - suction cup diameter: 250 mm - suction cup number: 10 - main beam length: 6000 mm - main beam cross-section: 80×80 mm - crossbeam length: 1200 mm - crossbeam cross-section: 40×40 mm - handle length: ...

type ABUS VS - 1000/5,0 (406) Overall height 3.65 m Lower edge height 3.30 m Column diameter stlpa 406 mm Projection 5,000 [mm] Hook travel 2,900 [mm] Btto 941 [kg] Swivel 360 [°] Chain hoist ABUS GM 3, lifting speed 1/4 m/ min, cat motor. Powered Original crane book with inspections Last test 2025 new paint job Column RAL 7038 light grey Boom RAL 1007 - daffodil yellow current price - new 10.580 eur -without packaging, transport and VAT. - Pictures - original condition before overhaul