CNC Long Turning Automatics used for sale (51)

TX8i-s / WinFlexIPS Bar diameter up to Ø 32 mm Version convertible long/short turning Controlled axes 9 Tool Carrier WRV Top X/Y/Z Dualdrive Sub-spindle with lower WRV, separate drive Rear unit with drive Nominal voltage 400 V, 3~, N, PE · 50 Hz Connected load 28 kVA, pre-fuse 63 A Supply cable recommended 16 mm² to 30 m, otherwise 25 mm² Total drive power 46 kW · 73 A Compressed air requirement approx. 300 Nl/min Machine weight 6,850 kg Dimensions L × W × H 3,870 × 1,670 × 2,500 mm Safety standard EN ISO 23125, type 3 small - Cooling lubrication with cutting oil — internal supply 30 bar, medium pressure 20 bar, high-pressure internal cooling 80–120 bar with its own pump - Coolant treatment plant with belt filter (ELBARON) - Mist extraction and smoke extractor - Fire protection and extinguishing system — prerequisite for unmanned shifts with oil - Work ...

GENERAL Project No.: 906048 Quantity: 1 pcs. Manufacturer: MAIER Type: ML 26 C5-Y2 Control: Fanuc 31i B Year of Make: 2019 Condition: Used machine Approx. (hrs): 31850 Spindle Approx (hrs): 13519 Program run approx. (hrs.): 28672 DESCRIPTION TURNING Axles 7 Max. turning diameter 26 mm Max. speed main spindle 8000 1/min Max. power main spindle at ED 10-40/100% 5.5/3.7 kW Spindle Passage Main Spindle 32 mm Axes on the main spindle unit C (5° indexing)/Z Workpiece spindle stroke main spindle 450 mm Max. rapid traverse speed in X/Y/Z Main spindle unit 32 m/min Partial hollow clamping cylinder on the main spindle Max. speed sub-spindle 8000 1/min Max. power sub-spindle at ED 10-40/100% 5.5/3.7 kW Spindle pass-through sub-spindle 26 mm Axes on the sub-spindle unit C (5° indexing)/Z/Y Blowing air through the sub-spindle Workpiece ejection through the sub- ...

GENERAL Project No.: 906047 Quantity: 1 pcs. Manufacturer: TORNOS Type: EvoDeco 32/10 Control: Fanuc 31i B5 plus Year of Make: 2022 Condition: Used machine Approx (hrs): 17435 Spindle Approx (Hrs): 10233 DESCRIPTION TURNING Axles 10 Max. turning diameter 32 mm Max. speed main spindle 8000 1/min Axes on the main spindle unit C/Z Workpiece spindle stroke main spindle 260 mm Max. speed sub-spindle 8000 1/min Axes on the sub-spindle unit C OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Electrostatic oil/emulsion mist extraction system Scraper Chip Conveyor Coolant Setup Coolant temperature control Preparation for CO2 fire extinguishing system Parts Discharge Belt Precast removal device Bar Feeder/Bar Loader ROBOBAR SBF-532 "3M"" Max. rod diameter 32 (36) mm Max. rod length 3200 m ...

Key data: 26 mm

Control: Traub TX 8i Main spindle max. rod Ø: 26 mm Max. speed: 8,000 rpm Sub-spindle max. rod Ø 26 mm Max. speed: 8,000 rpm Tool system Number of turrets: 2 (upper and lower turret) Tool positions per turret: 12 stations, without drive Front apparatus 5-way with Z3 carriage without drive Reverse processing station (5 tools) without drive IEMCA BOSS 432/44 Bar Feeder

CNC Swiss Automatic Lathe with Bar Loading Magazine Stamag FMB Turbo 5-42 TX8i control system with Traub tool monitoring Main spindle: - C-axis with driven tools - Holder for driven guide bushing, max. passage 26 mm, stroke 225 mm - Electrical and pneumatic control for driven guide bush Sub-spindle: - Counter spindle as motor spindle with hollow clamping and locking device with Z4 carriage - C-axis - Tool carrier lower X1 / Y1 - Axes - 12 tool holders driven - Tool carrier top X2 / Z2 - Axes - 12 tool holders, driven - X3 - Transverse axis for front apparatus / sub-spindle - Front apparatus 5-way with Z3 carriage without tool drive - Tapping side processing station (5 tools) with axis X4 / Y4 without Tool drive - Hinged belt conveyor - Coolant equipment for externally and internally cooled tools, 20 l/min - 30 bar - Equipment for deep hole drilling with comp ...

Key data: 26 mm

5 CNC lathes machines for sale ONLY in PACKAGE : 1. CNC sliding head lathes, 3 pieces Make : Traub Type : TNL 26 Year of construction : 2011 / 2008 / 2006 Hours : 64.154 / 75.849 / 81.823 Control : Mitsubishi TX 8i Equipment : - Main spindle - Sub-spindle - Turret top - driven + Y axis - Turret lower - driven + Y axis - Front apparatus - driven + Y axis - Residual apparatus - Bar feeder 2x FMB / 1x Breuning The machines come from ongoing production. 2. CNC lathe, 2 pieces, one defective Make : EMCO Type : Turn 332 MC Year of construction : 2010 / 2008 Operating hours : unknown Control : Siemens Sinumerik 840D Equipment : - Main spindle - Sub-spindle - Revolver top - Revolver underneath - Bar feeder TOP ETL 8-45 One machine is from ongoing production, one has already served as a spare parts carrier, and several components have been  ...

General Manufacturer: Citizen Type: C16-VII Year of Make: 2003 Control: Cincom Mitsubishi Spindle Bar Passage: 16 mm Turning length: 200 mm Main spindle: 10,000 rpm C-axis 0.0001° Sub-spindle: 10,000 rpm spindle indexing Dimensions and weight Weight: 1,750 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Iemca Genius 118 Bar Feeder Tool holder for a total of 17 tools 6 axes X1/Z1/Y1/C1/X2/Z2 Chip conveyor Parts Conveyor Belt Oil Mist Extraction Air Max

General Manufacturer: Citizen Type: Cincom C16-VI Year of Make: 2004 Control: Cincom Mitsubishi Spindle Bar Passage: 16 mm Turning length: 200 mm Main spindle: 10,000 rpm C-axis 0.0001° Sub-spindle: 10,000 rpm spindle indexing Dimensions and weight Weight: 1,750 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Iemca Genius 118 Bar Feeder Tool holder for a total of 17 tools 6 axes X1/Z1/Y1/C1/X2/Z2 Chip conveyor Parts Conveyor Belt Oil Mist Extraction Air Max

General Manufacturer: Citizen Type: Cincom C16-VI Year of Make: 2005 Control: Cincom Mitsubishi Spindle Bar Passage: 16 mm Turning length: 200 mm Main spindle: 10,000 rpm C-axis 0.0001° Sub-spindle: 10,000 rpm spindle indexing Dimensions and weight Weight: 1,750 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Iemca Genius 118 Bar Feeder Tool holder for a total of 17 tools 6 axes X1/Z1/Y1/C1/X2/Z2 Chip conveyor Parts Conveyor Belt Oil Mist Extraction Air Max

MANURHIN KMX 326 C sliding head lathe was built in 2008 in France by MANURHIN KMX. The machine, distinguished by its high efficiency, was specially designed for precision machining of workpieces with even the most complex geometries. All machining processes, i.e. precision drilling, threading and turning are performed by means of a reliable spindle and tools taken from two capacious turrets. The MANURHIN KMX 326C CNC automatic lathe is offered with equipment, consisting of, among others, a CNC controller, bar feeder and tooling. The total weight of the machine is 2600 kg. Technical specifications of the MANURHIN KMX 326 C CNC lathe - CNC controller: GE FANUC Series 18i-TB - number of axes: 5 (X1, X2, Y, Z, C) - spindle rotational speed: 50-7200 rpm - spindle bore: 26 mm - spindle stroke: 160 mm - 6-position turret (2 pcs.) - bar feeder: FMB turbo 3-36 - toolholders - collets  ...

CITIZEN CINCOM M32 CNC turning center built in 2011 in Japan provides precision drilling, threading and turning of workpieces with a maximum diameter of 32 mm. To improve the machining process, the machine uses two spindles (main spindle and back spindle) with high rotational speed and power. A specially designed bed with high thermal stability further reduces the impact of heat during machining, increasing the life and reliability of all components. All machining parameters are programmed in the intuitive CINCOM SYSTEM M6D CNC control with many useful functions. Among the functions available, the controller allows, for example, self-diagnosis of the machine or program backup. High reliability, precision and extensive machining capabilities make the CITIZEN M32 III swiss-type lathe the ideal choice for even the most complex applications. The offer also includes extensive additional ...

Max. rod Ø 20 mm Max. machining length 165 mm Spindle speed 8,000 1/min Max. rod Ø sub-spindle 20 mm Max. speed sub-spindle 8,000 1/min Number of tools that can be used: 21 Turning Tools Multiple Chisel Holders: 6 Driven tools for transverse machining: 3 Front side drilling tool: 4 Rear drilling tool: 8 Speed driven tools: 8,000 1/min

CITIZEN M32 V CNC sliding head lathe was built in 2003 in Japan by CITIZEN WATCH CO., LTD. The machine is used for precision 8-axis machining of workpieces of even the most complex geometries. All machining processes, i.e. precise drilling, threading and turning are performed by 2 reliable spindles and tools taken from 3 capacious tool stations. What’s more, the specially designed bed with high thermal stability perfectly reduces the influence of heat, increasing the service life of all components and cutting tools. The offer also includes a wide range of equipment that significantly extends the machine’s machining capabilities and guarantees excellent repeatability of the manufactured parts. This includes e.g. an advanced CNC controller with many useful functions, such as self-diagnosis and program backup. All this makes the CITIZEN M32V swiss-type lathe the best choice for many  ...

STAR ECAS 32T CNC lathe was built in 2007 in Japan by STAR MICRONICS CO.,LTD. The machine, which combines high performance and precision, has been designed to improve the machining of even the most complex workpieces. Its extensive machining capabilities facilitate complex machining processes such as turning, drilling and threading, both on the front and back of the workpiece. This makes the STAR MICRONICS ECAS 32T CNC lathe indispensable in many industries, such as the automotive and aerospace. The STAR ECAS-32T swiss-type lathe is equipped with, among others, 11 axes, two spindles (main spindle and sub-spindle) and capacious turrets that can accommodate many tools for any type of machining. The maximally rigid design additionally ensures incredible process stability, which is essential to achieve excellent precision and quality of the produced parts. The total weight of the machine  ...

STAR ECAS 32T CNC lathe was built in 2005 in Japan by STAR MICRONICS CO., LTD. The machine, designed for the precise machining of complex workpieces, is used in many industries, such as automotive and aerospace. Its extensive machining capabilities facilitate complex machining processes, such as turning, drilling and threading, both on the front and back of the workpiece. Compared to other lathes available on the market, the offered STAR ECAS-32T swiss-type lathe stands out with the use of 11 axes, two 10-position turrets and two spindles (main spindle and sub-spindle). The extremely rigid design, in turn, provides the incredible process stability which is necessary to achieve excellent precision and quality of the produced parts. All this is complemented by intelligent CNC control, in which even the most advanced work programs are created in just a few steps. The STAR MICRONICS ECAS  ...

Specifications: Main spindle: Max. turning diameter: 33 mm Max. speed: 8000 1/min Drive power: 5.5 kW Drive power at 60% ED: 7.5 kW Slide 1: Carriage path Z1: 320 mm Slide path X1: 50 mm Carriage path Y1: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool holder slide 1: Number of tools fixed with tool shank 16 x 16: 5 pieces Slide 2: Slide path X2: 165 mm Carriage path Z2: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool holder slide 2: Number of stations for turret with integrated spindle: 8 pieces Number of axially driven tools (integrated): 8 pieces Coolant pan, approx.: 400l Coolant pump, max. capacity: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - CNC control Fanuc iT - Workpiece unloading system - IEMCA bar loading magazine - 5-item tool carrier plate for carriage 1 - Elec ...

CNC automatic lathe Traub TNL 32-7 • Version TNL32/TNL32K alternating mode • Control TX8i-s • Main spindle passage 32 mm, with C-axis • Counter spindle incl. partial hollow stress • Revolver top X/Y/Z/H axis: 10 shots dual drive • Revolver bottom X/Y/Z/H axis: 9 shots total drive; Counter spindle sep. Drive • RAPP 8-fold; Total drive 3 tools IK • Workpiece deflection unit with linear gripper • Coolant supply 3 bar • Coolant supply 8 bar • Hinge belt chip conveyor, discharge height 1000mm • Glass scale X-axis turret top/bottom • Compact belt filter for cooling lubricant: filter fineness approx. 30-40 μm • Bar loading magazine FMB LSK 38, for rods 3.2 m (original price at that time 340.000,- €uro)

CNC slot machine Gildemeister GLD 25 with counter spindle Technical data: Manufacturer: Gildemeister Type: GLD 25 Built: 1999 Control: FANUC Series O-T Main spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (Z-axis): 160 mm Counter spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (C-axis): 265 mm - Rapid speed C-axis 15 m/min Sled: - Slide: X= 30 mm, Y= 220 mm - Rapid x-axis 10 m/min - Rapid y-axis 15 m/min - Number of WZ on the sled: 5 + 3 (driven) - Speed WZ (driven) : 6,000 rpm Accessories: - Chip conveyor -Bar loader: IEMCA MINI BOSS 325/32 Dimensions LxWxH: - Machine with chip conveyor 3150 x 1100 x 1700 mm - Bar loader 3900 x 800 x 1400 mm Weight: - Machine: approx.2000 Kg - Bar loader: approx. 1000 kg. - Total weight: approx. 3,000 kg

Swiss type CNC Manurhin KMX TWIN 207 is a double-spindle automatic machine with automatic feeding of bars. The CNC lathe was produced in 2000 in France. Technical data : - type of automatic lathe: Swiss Type - control: NUM - Swiss control - number of axles: 6 - turning diameter up to: 20 mm - diameter of passage Ø: 28 mm - number of turns: 150-8000 rpm - feed: 10/15 m / min - number of tools: 8 + 8 + 4 + 4 pcs - spindle power: 2.2 kW - tailstock: counter spindle - machine weight: 5000 kg Lathe equipment: - two main spindles / two opposite spindles - material feed with FMB Doppel-Turbo - counter spindle: 150-6000 rpm - chip conveyor - Manurhin / Schlichting-System clamps - coolant filtration

turning speeds: 0 - 8.000 U/minhollow: 20 mmcontrol: FANUC - 31i B Turning Automatic Lathe - swiss lathe | ML20C5 - 2016 equipped with chip conveyor.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: ML20C5 | ML-20C5 | ML-20 C5 | ML 20 C5The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar material dia.: 20 mmspindle passage: 24 mmturning speeds: 10.000 U/minturning length: 350 mmControl: CNC Yaskawa Siemens 840Di c-axis: 0,01° °gripping station: 20 mmc-axis: 0,01° °speeds: 10.000 U/minrapid traverse: 20 m/minturret (x-stations): 3 x 8 + (3x Y-Achse) total power requirement: 5,5 kWweight of the machine ca.: 4.850 tdimensions of the machine ca.: 3,2 x 1,75 x 1,9 mdriven tools: 3 x 8 bar loader: FMB high pressure pump: ja/yes parts conveyor: ja/yes option long parts: ja/yes CNC sliding headstock automatic lathe Star ECAS 20T (12 axes) with 2 spindles, 3 turrets and barloader FMB.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar material dia.: 32/38 mmspindle passage: 44 mmturning length: 320 mmturning speeds: 200-8000 U/minc-axis: 0,001 Gradgripping station: 32/38 mmturning length: 120 mmturning speeds: 200-8000 U/minc-axis: 0,001 0number of tools: 13 fixnumber of milling stations: 4+5 drivencontrol: Mitsubishi Meldas M70 Number of axles: 5+2 St.total power requirement: 7,5 kWweight of the machine ca.: 2850 kgdimensions of the machine ca.: 2,5 x 1,4 x 1,75 + FMB mbar loader: FMB turbo 3-36 fire distinguisher: Kraft & Bauer CNC sliding headstock machine Citizen L32-1M8, built 01/2019 with barloaderFMB turbo 3-36equipped with swarf & coolant tank, fire distiguisher.ON/OFF 29.564h (status 24.03.2026)Running hours 26.607h (status 24.03.2026)GBL function (standard)LFV function: noThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 16 mmspindle passage: 16 mmturning length: 160 mmcontrol: GE FANUC Series 18 i-T spindle turning speed range: 8000 U/minrapid traverse: 30 m/mintotal power requirement: 2,2 kWweight of the machine ca.: 2,1 tAccessories: bar loader IEMCA, GENIUS 226-32 L, YOM 2002 (for bar dia. 2 - 26 mm and bar lengths 1500 - 3210 mm), chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 20 mmspindle passage: 24 mmturning length: 320 mmControl: CINCOM spindle turning speed - stepless: 200-10000 U/minturret head: weight of the machine ca.: 3.35 tdimensions of the machine ca.: 3.0x1.3x2.3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

NC sliding headstock lathe Star SE 16 FMB Minimag bar loader high pressure coolant pump, Control: Fanuc 21i-TB