Band Saws used for sale (154)

Inv. Num. : 7179 Type: BS 740 RS3 Producer: FELDER Created: 2021 Parameters: Machine width: 860 mm Machine length: 1100 mm Machine weight: 500 kg Cutting height: 450 mm Saw blade length: 5365 mm Equipment: Automatic workpiece feeding

cutting diameter: 230 mmcutting speed: 35 - 70 m/mincutting width: 260 x 200 mm: mmsaw band length: 2720 x 27 x 0,9 mmtotal power requirement: 1,1 kWweight of the machine ca.: 0,68 tdimensions of the machine ca.: 1,8 x 1,8 x 1,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Alternativ Saw KASTO PSB 280 U Blades dimensions: 450 mm x 40 mm x thickness 2 mm Cutting capacity in the round: 280 mm Square cutting capacity: 240 x 240 mm Rectangular cutting capacity: 280 x 160 mm Cutting capacity at 45°: 170 mm Automatic descent 2 speeds rotation Swivel jaws from 0 to 45° Jaws length : 350 mm x Height 150 mm Maxi jaws opening: 310 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 1800 x 800 x 1300 mm Weight: approx 1 T

CONTROLS  electronic controls TECHNICAL SPECIFICATION  max. diameter of saw blade: 260 mm  cutting capacity round: 260 mm  cutting capacity square: 260 mm  mitre cutting: yes   cutting range     round: 260 mm  .. oblong: 400 mmTECHNICAL SPECIFICATION  max. cutting height: 260 mm  sawband length: 4310 mm  sawband width: 0.9 mm  cutting speed min.: 17 m/min  cutting speed max.: 90 m/min  power of band drive: 2.2 kWELECTRICAL SPECIFICATIONS  total power consumption: 3.2 kW  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 2400 mm  space requirements -front/back-: 2100 mm  total height: 2000 mm  total weight approx.: 1220 kgMachine overhauled, cleaned, and all oils replaced!The machine is fully hydraulically equipped, with a cooling water tank and pump, and a chip container for quick emptying.

Bandsäge Karl Müller Cutting width 70 cm Cooling 2 cutting speeds Weight 400 kg Length 2 m Width 0.80 m Height 1.20 m

TECHNICAL SPECIFICATION  max. cutting height: 150 mm  sawband length: 3660 mm

Bundle clamping device manual

cutting diameter: 440 mmsaw band length: 5200 x 1,1 x 34 mmcutting width: 610 x 440 mmcutting speed: m/mintotal power requirement: 3,7 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 2,7 x 1,55 x 1,5 mBand saw horizontal- Coolant system- Emergency stop switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: FRIGGI Band Saw 2MF650 ACN Details: Type 2MF650 ACN Serial number 2511 Year of construction 1997

capacity 90 degrees: round: 115 mmcapacity 90 degrees: flat: 100 x 150 mmband saw dimensions: 1638 x 13 x 0,65 mm: 20/29/50 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Band length: min. 3200mm, max. 3400mm With welding machine

cutting diameter: 220 mmsaw band length: - mmcutting width: - mmtotal power requirement: 0,7 kWweight of the machine ca.: 0,240 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Delivery time immediately from stock! Motor three-phase current 400V with frequency converter (kW) 4.0 Table dimensions (mm) 600 x 600 Cutting width (mm) 400 Cutting height (mm) 390 Cutting speed (m/min) 50 – 1000 Band saw blade dimensions (mm) 3600 x 13 x 0.9 Machine dimensions without packaging (mm) 2225 x 1120 x 770 Weight (kg) 465 Standard equipment Precise drive controlled via a frequency converter Digital speed display Stepless belt speed Balanced intervertebral discs Hard rubberized treads Hardened and ground guide jaws LED task light Height-adjustable guide arm Machine colour RAL 7005 / RAL 7035 12-month warranty for single-shift operation

cutting diameter: 450 mmsaw band length: 6600 x 41 x 1,3 mmtable height: 800 mm: 450 mm: 450 mm: 450 x 270 mmworkpiece weight: 15 - 95 m/min: 7,5 kWwork height max.: 3000 kgconnected load: 3750 x 1400 x 2100 mmControl: NEW PRICE ~ 40.700 EUROvery good conditionSemi-automatic bandsaw, two-column guidedEquipment:- hydraulic vice- infinitely variable cutting speed- chip conveyor- line laser- driven chip brush- coolant device- operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

S131GH Metal band saw Motor: 230V 1.1kW 50Hz Feed infinitely adjustable Band saw blade speed: 22/ 31/ 55 m/min Band saw blade 1638x13x0,65 mm Cutting angle -45° to 60° Dimensions 1085 x 498 x 978mm Net weight 78kg G&STÜ-3300131

cutting diameter: max. 225 mmsaw band length: 2.480 mmwidth of saw-band: 27 mmdimensions of saw-band: 2.480 x 27 x 0,9 mmcutting angle: 0 - 60 °band speed: 20 - 90 m/minCuttingrange 90°: max. 225 mmcapacity 90 degrees: square: 190 mmcapacity 90 degrees: flat: 150 x 245 mmcapacity 60 degrees: round: 90 mmcapacity 60 degrees: square: 90 mmcapacity 60 degrees: flat: 120 x 90 mmcapacity 45 degrees: round: 145 mmcapacity 45 degrees: square: 150 mmcapacity 45 degrees: flat: 190 x 150 mmtotal power requirement: 1,5 kWweight of the machine ca.: 185 kgdimensions of the machine ca.: 1,5 x 1,2 x 1,6 mDocuments: Saw Bands: 1x Coolantsystem: Metal BandsawOPTIMUM - OPTIsaw S 275 PVThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saegebaender Roentgen, new

cutting diameter: 260 mmcapacity 90 degrees: round: 260 mmcapacity 90 degrees: square: 250 x 400 mmsaw band length: mmtable height: mmcutting speed: 20 - 80 m/minControl: konventionell total power requirement: 2,0 kWweight of the machine ca.: kgDimensions (LxWxH): 2,0 x 1,4 x 1,2 mHorizontal band saw, semi-automaticThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Band saw Saw machine Brand: HESKA Type: ESU-H63 S/N 793322 Infinitely adjustable 16-3200 m/min Hydraulic feed table with approx. 410 mm stroke, to the right approx. 45° and to the left approx. 15° inclined Band length: 4700 mm Operating instructions are available. Sold only to commercial enterprises! All information without guarantee

Hans Schreiner metal bandsaw with pivoting cutter arm, for the professional, with soft hydraulic for the correct pressure, electrical coolant systemfor all kind of metals, steels and Nirosta, quick clamping viceautomatic cut stop, the semi-automatic control with preprogrammed cycle (user starts - clamping workpiece - cutting - saw arm resetting - unclamp workpiece) is optional at the MBS370SA for metal worker and workshops with small - and mass serial products. Strengthened frame for more stability.CE conformTechnical Data:Motor: 400V,50HzReduce gear rate: 25:1 Wheel diameter: 380mmBlade size: 3160x27x0.9mmBlade speed: 34 or 68 m/minCutting angle: 45°L, 30°L, 15°L, 0°, 15°R, 30°R, 45°R, 60°RCoolant pump: 400V, 50Hz, 3~, 25WPacking size: 1770x765x1120mmWeight: 365 kg

Standard equipment torsion-resistant, robust cast-iron saw frame driven shaving brush powerful industrial worm gear motor automatic shutdown after cutting end mechanical saw band tension with electrical band breakage monitoring Quick-release vice, movable Hydr. Saw frame lowering with rapid response function (infinitely adjustable) electric coolant pump Precision carbide saw band guides, ground (adjustable) large-sized round support table, with miter cuts, miter indicator (scale) to the operator side direct switching from manual operation to downing mode easily removable chip collecting tray Material stop 500 mm with scale incl. saw band combing gearing 4/6. Techniche Data Motor three-phase current 400 V, pole switchable 1.1/1.5 kW Saw band Dimensions 2720 x 27 x 0.9 mm Flywheels 300 mm Cutting speed 40/80 m/min. Vice-height span 275 mm Working height 978 mm Weigh ...

Demonstration machineYear of manufacture 2021Hans Schreiner metal band saw with swivel arm, for professionals, with soft hydraulics for the right cutting pressure, electric coolant system, for all metals, steels and stainless steel. Quick-release vise. Choice of automatic operation and manual operation can be easily switched. Automatic belt shutdown, price with base, reinforced frame for more stability, CE compliantTechnical data:Motor output power up to 1.9kW S6 (1.5kW S1)

Band saw Jespa 340/630 HAP column guided Band saw Jespa Semi-automatic Type 340/630 HAP Column-guided Built in 2009 Saw blade length 5.150mm

Dimensions (L/W/H): 6530x1150x2980 mmWeight: 900 kgTotal power requirement: 3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting range 90°, round: 225 mm Cutting range 90°, square: 200 x 200 mm Cutting range 45°, round: 160 mm Cutting range 45°, square: 160 x 160 mm Cutting range 60°, round: 100 mm Cutting range 60°, square: 100 x 100 mm Saw band: 2480 x 27 x 0.9 mm Cutting speeds: 45 / 90 m/min Engine power: 1.5 kW Voltage: 400 V Delivery - BiMetal saw band 2480 x 27 x 0.9 mm, 6/10 ZpZ - Carbide guides (4 jaws) - Adjustable workpiece stop 0.5 m - Manometer for belt tension - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base

Dimensions (L/W/H): 5000x1150x2980 mmWeight: 665 kgTotal power requirement: 3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting area round / square 90°: 255 mm / 210 x 210 mm Cutting area flat 90°: 310 x 210 mm Cutting area round / square 45°, right: 220 mm / 210 x 210 mm Cutting area flat 45°, right: 220 x 200 mm Cutting area round / square 45°, left: 230 mm / 200 x 200 mm Cutting area flat 45°, left: 230 x 200 mm Cutting area round / square 60°, right: 135 mm / 135 x 135 mm Cutting area flat 60°, right: 135 x 135 mm Sawband dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor recording power S6 40%: 2.2 kW Working height: 930 mm Delivery: - Saw band - Material stop - Manometer (band voltage) - Saw band hard metal guides - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base

Dimensions (L/W/H): 6000x1150x2980 mmWeight: 800 kgTotal power requirement: 3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Execution semiautomatic 90° diameter: 600 800 x 600 mm Engine: 14,5 kW Blade: 9000 x 67 x 1, 6 mm Min. diameter: 10 mm Working height: 630 mm Weight: 4.3 to.

Dimensions (L/W/H): 6000x1150x2980 mmWeight: 850 kgTotal power requirement: 3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Standard equipment Manual heavy duty band saw machine with hydraulic Sawframe reduction for miter cuts from 45 ° left to right 65° Saw frame made of sturdy cast iron construction Massive round table Oil bath gearbox consisting of bronze wheel with hardened and ground steel worm Carbide Guide and adjustable roller bearings Quick clamping Vice with additional quick adjustment and quick release lever Electric high-performance Coolant pump Mechanical blade tension with electric blade monitoring Control tool Free delivery including packaging

Dimensions (L/W/H): 5000x1150x2980 mmWeight: 665 kgTotal power requirement: 3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 100 mmcapacity 45 degrees: round: 65,0 mmcapacity 90 degrees: flat: 100 x 150 mmcapacity 45 degrees: flat: 60 x 100 mmdimensions of saw-band: 1470 x 13,0 x 0,65 mmvolt: 230 V: 45,0 m/minweight: 26,0 kgrange L-W-H: 700 x 320 x 420 mmscope of delivery- saw band- workpiece stop- Quick release vice- Ergonomic handle- Chip collector The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mmsaw band length: 3660 x 27 x 0,9 mmcutting width: 320 mmcutting capacity - flat: 320 x 300 /90° mmcutting capacity - round: 320 / 90° mmcutting capacity - square: 300 / 90° mmspeed: 20 - 100 m/minsawing motor: 2,2 kWhydraulic motor: 0,37 kWcoolant pump: 0,12 kWtotal power requirement: 2,8 kWweight of the machine ca.: 770 kgdimensions of the machine ca.: 2100 x 1300 x 850 mmFeatures:• Inverter for adjustable speed• hydraulic lifting of the saw arm• automatic stop after sawing operation• manual saw blade tensionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mmsaw band length: 3660 mmcutting width: 1,3 mmclamping range: Länge 450 mmclamping range: Höhe 250 mmcutting speed: 20 - 70 m/mincutting capacity: stufenlos mitter cutting - all-position: 45 °voltage: 380 Vfrequency: 50 Hzpower capacity: 0,55 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 1,5 x 1,0 x 1,6 mcoolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 120 mmcapacity 90 degrees: flat: 120 x 102 mmcapacity 90 degrees: square: 112 x 112 mmcapacity 45 degrees: flat: 78 x 78 mmcapacity 45 degrees: round: 80.0 mmcapacity 60 degrees: flat: 50 x 43 mmcapacity 60 degrees: round: 50.0 mmcutting speed: 35 - 80 m/minsaw band length: 1440 x 13.0 x 0.65 mmvoltage: 230 Vengine output: 1300 Wattweight: 18.0 kgrange L-W-H: 520 x 400 x 900 mmPortable metal band saw for cuts between 0° and 60°Dry cutting (no coolant)Up to 60% faster cutting compared to a conventional band sawthanks to the NG system with opposite direction of rotation of the saw blade.- Dry cutting (no coolant)- Innovative, coupled band tensioner. for checking and setting the correct band tension- Steel vice with prism-shaped guide- Powerful 1300 W motor- Constant Speed setting with current limitation- Stable, robust frame made of sectional steel- Bracket locking devi ...

cutting diameter: mmsaw band length: mmtable height: mmweight of the machine ca.: 3 tdimensions of the machine ca.: mDimensions Saw Band (metric): 18‘ 4-1/2’ x 1-1/2 ‘x .050’Saw Band Dimensions (inch): 18‘ 4-1/2’ x 1-1/2’ x .050’Band width in mm: 41Band length in mm: 5600Band thickness in mm: 1.3Automatic band saw (360 mm)SMA-REF-7091Category: BandsawsManufacturer: PehakaType: PEHAKAMAT 360 ZPYear of manufacture: 2000Saw blade: 5.600 x 41 x 1,3 mmWorking range:90° round 360 mm90° square 360 x 360 mmSpecial features:roller conveyor 1,300 x 380 mmhydr. belt tensioningDimensions Weight: 3 tonnesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: - mmthroat: - mmworkpiece height: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 255 mmsaw band length: 2765x 0,9 x 27 mmcutting width: 300 x 180 mmturning speeds: 35 + 70 U/mintotal power requirement: 1,8 kWweight of the machine ca.: 450 tdimensions of the machine ca.: 1,7 x 1,23 x 1,75 mSPECIAL PRICE!Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250Super HA-I Easy• miter left 60° + right 45°• Material height sensor (automatic cut start detection)• Frame and gear made from one piece, very quiet cut and very low vibration• Hydraulic vice can be moved sideways a.• Guided, high quality industrial bearings• Solid vice + machine casting• Large machine bed• Machine base with tool compartment and chip drawer• Cut monitoring by ammeter• Cutting pressure feed regulator• Support roller (infeed side)• Ball bearing turntableSemi-automatic function:1. Clamp material2. Saw starts3. Rapid lowering to the s ...

cutting diameter: - mmsaw band length: - mmtable height: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 227 mmsaw band length: 2455 mmtable height: 840 mmcutting width: 260 mmturning speed range:: 36 / 72 m/mindimensions of saw-band: 2455 x 27 x 0,9 mmcapacity 90 degrees: round: 227 mmcapacity 90 degrees: square: 220 mmcapacity 90 degrees: flat: 260 x 220 mmcapacity 45 degrees: round: 150 mmcapacity 45 degrees: square: 145 mmcapacity 45 degrees: flat: 200 x 220 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,25 tdimensions of the machine ca.: 0,8 x 1,4 x 1,5 mMiter band saw- automatic cut- Base frame- Coolant pump- Chip brush for cleaning the saw band- Vise with quick adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mmsaw band length: 2950 x 27 x 0,9 mmtable height: ca. 800 mmband speed: 36/72 m/mintotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,37 tdimensions of the machine ca.: mMEP sawing machine:Saw band bow, vice unit and base made of durable cast ironPrecision grade marking on the cast iron structureElectrical system (with fully identifiable electrical wiring andLow voltage system 24 V)Switch handle IP 55 for manual cycles (if available)Rotating scraper brush for the saw bandClamping unit with vice for quick approachAccurate stops with adjustment for miter cuts at 0°, 45°, 60° leftBi-metal saw band 2950 x 27 x 0.9 mmKeys, instructions for use and instructions for ordering spare parts in theUser languageSHARK 281 with manual operation and SHARK 281 CCS with manual operation and cuttingwith automatic head feed by its own weight.CCS (Cut Control System) w ...

: 1000 mm: 1000 mm: 1200x1000 mmsaw band length: 11300 x 80 x 1,3 mmtable height: 790 mmband speed: 14 - 60 m/mintotal power requirement: 18 kWweight of the machine ca.: 9,0 tdimensions: 5,0 x 1,68 x 3,15 mThe semi-automatic, hydraulic saws from the X-tech line offer the bestSaw technology and best performance when cutting special steels• The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise.• The chip conveyor is hydraulically driven and the speed is adjustable• All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee.• Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They ...

: 900 mm: 900 mm: 900x900 mmsaw band length: 9300 x 67 x 1,1 mmtable height: 790 mmband speed: 14 - 60 m/mintotal power requirement: 11 kWweight of the machine ca.: 8,45 tdimensions: 4,485 x 1,68 x 3,15 mThe semi-automatic, hydraulic saws from the X-tech line offer the bestSaw technology and best performance when cutting special steels• The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise.• The chip conveyor is hydraulically driven and the speed is adjustable• All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee.• Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They m ...

cutting diameter: 220 mmsaw band length: 2455 mmtable height: 850 mmcutting width: 230 mmcutting speed: 35 + 70 m/mindimensions of saw-band: 2455 x 27 x 0,9 mm: 90 mm: 90 mm: 90 x 100 mm: 150 Impact energy: 150 Air consume per blow: 150 x 210 : 220 mmstroke back stop: 210 mmcross-slide: 230 x 185 total power requirement: 1,2 kWweight of the machine ca.: 0,24 tdimensions of the machine ca.: 1,2 x 0,6 x 1,7 mSPECIAL PRICE!-Miter cuts up to 60° left-Cutting speed 35 / 70 m / min.- Vice with quick release device-Carbide saw band guide-Tape tension control-Electr. automatic coolingAuto-Cut-System = 3 step system-Automatic saw frame lowering via the hydraulic cylinder-Infinitely adjustable feed-with limit switch- rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed-Manual modeShare of freight costs 85 EURThe data for this ad was created with ...

cutting diameter: 240 mmsaw band length: 2910 x 27 x 0,9 mmcutting width: 310 mmtable height: 900 mm: 35 + 75 m/min: 1,1/1,8 kW: 470 kg: 800 x 1720 x 1450 mmManufacturer no. 20437Description:- Miter cuts left 60° and right 45°- Quick-action clamping stick can be moved in the T-slot for quick position changes- Hydraulic brake cylinder- Large ball-bearing turntable for easy miter adjustment (durable)- Chip clearing brush- Machine base with automatic cooling system- Lockable main switch, emergency stop separately- EMC (Electromagnetic Compatibility), UVV- Current consumption display (saw band wear history, tool monitoring)- Automatically more performance with the proven Berg & Schmid 3-stage AutoCutsystemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 460 mmsaw band length: 0/ mmtable height: 0/ mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mmsaw band length: 4570 x 27 x 0,9 mmtable height: mmcutting width: 450 x 280 mmpower capacity: 4,0 kWcutting speed: 15 - 105 m/minengine: 380 Vtotal power requirement: 4,0 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 1,8 x 0,8 x 1,2 mBand saw with- coolant device- mitre deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 240 mmcapacity 90 degrees: square: 240 mm: 165 x 310 mmsaw band length: 2.725 x 27 x 0,9 mm mmtable height: 940 mmband speed: 35 / 70 m/mintotal power requirement: 1,1 kWweight of the machine ca.: 0,4 tThe Z252/DG has the following equipment:- Hydraulic semi-automatic,- Double miter 60° left/45° right- emulsion pump,- base,- saw blade,- 400V plug -16A-The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 560 mmsaw band length: 7.260x54x1,6 mmControl: mit 99 Programmen work height max.: 650 mmChip coveyor: inkl. power capacity - table: 10 HPsawing motor: 650 kWweight of the machine ca.: 4.800 kgdimensions of the machine ca.: 3.400x2.050x2.380 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.