128 DMG used machine for sale

Inv. Num. : 8514 Type: CLX 450 TC Producer: DMG Created: 2022 Parameters: Switch-on hours: 13312 h Hours: 8547 h Maximum spindle speed: 5000 1/min X-axis travel: 750 mm Y-axis travel: 200 mm Travel Z axis: 1000 mm Max. workpiece diameter: 400 mm Maximum length of the workpiece: 1100 mm Machine weight: 9200 kg

Control Heidenhain ... TNC 530 Clamping table surface ... 600x1000mm Axis X ... 630mm Axis Y ... 560mm Axis Z ... 560mm Spindle speed ... 0-12000 rpm controlled axes ... 5 cooling HSK 63 Table diameter ... 600mm Magazine spaces ... 24 Main engine power ... 15/10kW Max. workpiece weight ... 500kg The machine is in good condition, possible to test under power.

Inv. Num. : 8243 Type: DMU 60 P Producer: DMG Generated: Parameters: Work table length: 1000 mm Work table width: 600 mm Number of axles: 5 pieces X-axis travel: 600 mm Y-axis travel: 525 mm Travel Z axis: 500 mm Speed: 12000 1/min Machine weight: 4000 kg

DMG DMC 200 U duoBLOCKYear of manuf. : 2007 Control : Heidenhain iTNC 530 Speed : 12000 rpmMovement X/Y/Z : 1800/2000/1100 mmTool holder : HSK 100 ____________Description:In General:Year of manufacture:2007Control system:Heidenhain iTNC 530Travel distances X/Y/Z:1,800/2,000/1,100 mmRotational speed:12,000 rpmMedia feed-through:Blast air + cooling lubricantSpindle:Technology:Motor spindleSpeed:12,000 rpmPower:44 kWTorque:288 NmTool holder:HSK 100NC swivel head:Technology:Universal milling headB-axis:0°-180°NC rotary table:Technology:Rotary table with pallet carrierC-axis:360°Clamping surface:1,600 x 1,400 mmMax. table load:4,000 kgHolding torque:approx. 17,000 NmTool magazin:Technology:Chain magazineNumber of stations:120Tool changer:Double gripperEquipment:Position sensors:Direct scales in all axesChip disposal:Chip conveyorCoolant supply:Internal c oolant system, 40 barAu ...

Key data: 750 mm, 600 mm, 520 mm

CNC 5-Axis HSC Vertical Machining Center DMG DMU 70 eVo Linear NEW DESIGN Year of construction: 2011 Heidenhain iTNC 530 2-axis NC swivel rotary table Table size Ø 700 x 500 mm Table load max. 350 kg C-axis rotation 360° x 0.001° Swivel axis B-axis 120° x 0.001° X 750 mm Y 600 mm Z 520 mm Spindle drive motor 25/35 kW Spindle speeds max. 18,000 rpm. 60-fold tool magazine positions Tool holder HSK-A63 Electrified tour of the factory Offer number MV-6513

x-travel:1.250 mm y-travel:880 mm z-travel:800 mm spindle turning speed range:1 - 10.000 U/min high speed spindle taper ISO:50 table-size:1.250 x 1.000 mm max. workpiece weight: 2.000 kg feed speeds infinitely variable:1 - 30.000 mm/min rapid traverse speed:40 m/min weight of the machine ca.:16 t dimensions of the machine ca.:7,2 x 4,4 x 2,9 m

1 gebr. DMG DMU 50 M machining centre, built in 2001 X-axis travel: approx. 500 mm Y-axis travel: approx. 400 mm Z-axis travel: approx. 400 mm Table diameter approx. 630 mm T-slots 6 pieces B-axis can be swivelled manually (-5° to +95°) C-axis manually rotatable 360° Max. workpiece weight approx. 200 kg Tool holder SK40 (DIN 69871) Speed range up to approx. 8,000 rpm Spindle power approx. 7.5 – 10 kW Torque approx. 40 – 60 Nm Control: HH 124 Weight approx. 3.8 t.

This 4-axis DMG Lasertec 40 laser engraving machine was manufactured in 2009. It features a picosecond laser with an average power of 50W and a wavelength of 1064 nm. The machine offers a travel range of X=400 mm, Y=300 mm, and Z=500 mm, with maximum feed rates of 15 m/min for X and Y axes and 12 m/min for the Z axis. Consider the opportunity to buy this DMG Lasertec 40 laser engraving machine. Contact us for more information.

This 7-axis DMG GILDEMEISTER GMX 250S Linear was manufactured in 2008. A turn-mill centre featuring the advanced Heidenhain Plus IT 3D CNC Pilot 4290 control unit, it represents the pinnacle of turning and milling capabilities. Contact us for more information.

This 5-axis DMG DMU 100 T was manufactured in 2002. It features a Heidenhain control system and a SK40 taper. Note that the pneumatic cylinder of one of the two tool changers is defective and needs replacement. Consider the opportunity to buy this DMG DMU 100 T vertical machining centre. Contact us for more information about this machine.

Key data: 750 mm, 600 mm, 560 mm

DMG DMC 75V Linear . Details: YOC 2004 Program run 38,958 hours Spindle hours 37,462 hours Rapid traverse 90m/min Travel X-750/Y-600/Z-560mm Spindle HSK63 18,000rpm Tool magazine 30 places Direct path measurement system Table 950 x 650 Heidenhain iTNC 530 Outer blowing air Accessories: WITHOUT accessories such as tools, mounts and zero-point clamping system.

This DMG Gildemeister Twin 65 was manufactured in 2004. It features a Siemens 840D Powerline control, 2x Sauter revolver with 12x VDI 30 each, and a revolver 1 with Y-axis. It includes a parts pick-up device, belt filter system, coolant tank of 980L with 20/40 bar, and a bar loading magazine IRCO Profimat 65. Reach out for more information about this machine.

This 5-axis DMG DMC 100 H was manufactured in 2005. It features a Siemens 840D powerline control with Shopmill, a 1,000 mm travel in X, Y, and Z axes, and a speed range up to 8,000 rpm. The machine includes a HSK 100 tool holder, 270/360 tool positions, and two 800 x 800 mm pallets. Consider the opportunity to buy this DMG DMC 100 H horizontal machining centre. Contact us for more information.

This 5-axis DMG Sauer Ultra sonic 50 universal machining centre was manufactured in 2006. It features a Siemens 840 D control system, a 16-fold tool changer, and a fully protected cabin with safety doors. The table size is Ø 630 x 500mm, supporting a load of 200kg. Ideal for diverse machining needs, the DMG Sauer Ultra sonic 50 machine we have for sale is a robust addition to any workshop. Contact us for more information.

This 5-axis DMG DMC 100 H was manufactured in 2006. It features a Siemens 840D powerline control with Shopmill, and robust traverse paths of 1000 mm in X, Y, and Z axes. Equipped with a high-speed range up to 8000 rpm, dual gear stages, and an HSK 100 tool holder with up to 360 positions. Includes two 800x800 mm pallets and a B-axis at 0.001° precision. Contact us for more information about this machine.

This 3-axis DMG DMC 635 V eco was manufactured in 2011. It features a vertical milling spindle with a tool holder SK 40, capable of speeds up to 8,000 min-¹. The machine offers a maximum drive power of 13 kW and a rapid traverse rate of 25 m/min. Ideal for complex machining tasks, consider the opportunity to buy this DMG DMC 635 V eco vertical machining centre. Contact us for more information about this machine.

This 2-axis DMG GILDEMEISTER CTX 320 linear V3 was manufactured in 2004. A versatile turn-mill centre, it offers robust construction and precision for complex machining tasks. If you are looking to get high quality turning and milling capabilities consider the DMG CTX 320 linear V3 machine we have for sale. Contact us for more information.

This 3-axis DMG MILLTAP 700 was manufactured in 2016. It features a 24,000 rpm spindle, 60 m/min rapid traverse, and a quick tool change system. Equipped with a Siemens 840D control and a Renishaw 3D probe, it offers precision and efficiency. Consider the opportunity to buy this DMG MILLTAP 700 vertical machining centre. Contact us for more information about this machine.

This 4-axis DMG CTX 420 Linear V6 was manufactured in 2002. It features a Siemens 840D Powerline control, VDI 40 tool holder, Y-axis, chip conveyor, and a counter spindle. The machine has been fully overhauled by Eichten Werkzeugmaschinen GmbH, ensuring it is in perfect condition. If you are looking to get high-quality turn-mill capabilities, consider the DMG CTX 420 Linear V6 machine we have for sale. Contact us for more information.

This 5-axis DMG DMU 125 P hi-dyn was manufactured in 2001. It features a Heidenhain control system, a SK50 spindle taper, and 120 tool stations. With spindle hours totaling 22,180, consider the opportunity to buy this DMG DMU 125 P hi-dyn universal machining centre. Contact us for more information about this machine.

2 x BAZ DMG DMU 60T BJ 2000/2002

5 axle BAZ DMG DMU 70 BJ 2011

Milling machine DMG DMU 100t BJ 2003 more technical data and more pictures on request

5 Axle BAZ DMG DMU 50 evo BJ 2000 more technical data and more pictures on request

2 x poles BAZ Manufacturer: DMG Type: DMP 60s BJ: 2004 and 2003