194 DIVERSE used machine for sale

Screw conveyor, screw conveyor, screw conveyor, discharge screw - Type: Tubular auger - Screw length: 6024 mm - Drive motor: 3.00 kW - Speed: see nameplate - Housing: Galvanized steel - Screw conveyor: stainless steel 1.4301 - Screw conveyor: Ø approx. 490 mm

2500 heavy-duty grids various variants Used goods, very good condition, see pictures Material: Hot-dip galvanized Weight load: approx. 450 kg/m² Bearing rod runs over the long side The following variants are currently available: Dimensions Mesh size Bearing bar height Material thickness Bearing bar 1000x1000mm 19x30mm 45mm 3mm 1410x1000mm 19x30mm 45mm 3mm 1335x1000mm 19x30mm 45mm 3mm 1335x485mm 19x30mm 45mm 3mm 1335x720mm 19x30mm 45mm 3mm 1410x720mm 19x30mm 45mm 3mm 1410x670mm 19x30mm 45mm 3mm 1335x885mm 19x30mm 45mm 3mm 1410x870mm 19x30mm 45mm 3mm 1410x885mm 19x30mm 45mm 3mm 1140x1000mm 19x30mm 45mm 3mm Negotiation price: € 45,- per m³ net from stock P10267 Larger quantities on request! Numerous gratings with different mesh sizes and support rods are available! Goods are in stock. Transport and assembly possible on request. Viewing possible at ...

H16 Timber beam formwork girder Height 16cm, Width 65mm, Weight 3,3kg/meter The tried-and-tested components for many peeling systems. Formwork girders are basic of many formwork systems and can be used individually. The carefully manufactured beams prove themselves thousands of times a day on many construction sites. The location is our warehouse in 5202 Neumarkt For further information or a viewing, I am always at your disposal. You can reach us at Tel.Nr.: +43 664 1296830 or by e-mail: officeberger-international.at Berger Construction Equipment GmbH

Drill bits for rock drills in different lengths

Stainless steel container standing 6,000 liters, insulation - 1 x yes, 1 x no; Approximate dimensions: diameter: 1,850 mm, total height incl. feet: 3,300 mm, height feet: 700 mm, height container 2,300 mm without cone Use so far: lye or acid

Stainless steel container 5,000 litres, 2 chambers 50/50, 2 x lid, insulation, 2 x floor drain tap, 2 x 2,500 litres, Ca-abemssungen: length 2,900 mm, width 1,300 mm, height 1,600 mm Price ex works

Stainless steel tank standing 13,000 liters - 2 pieces in stock, Including insulation and agitator propeller. So far, they have been used for milk production. Approximate dimensions: Diameter: 2,100 mm, height incl. feet approx. 4,000 mm, height feet approx. 500 mm. Price ex works, delivery possible

Stainless steel tank standing 10,000 liters capacity, insulation, agitator propeller, approximate dimensions: diameter 2,100 mm, total height incl. feet 4,000 mm, height feet: 500 mm, use so far: milk, price ex works, delivery possible.

Painted ceiling supports 3.60m Steel construction supports with a red dip bath paint. Decoupling system - this enables a quick disarming of the support with little effort Foot reinforcement - by mounting a stronger pipe near the footplate Due to holes every 100 mm in the inner tube, the extension length varies between 50 and 500 cm Compatible with most of the accessories of other formwork Technical data: Inner and outer tube made of steel S235JR according to UNI EN 10219-1 / 2 concealed threads, step 8 mm, for adjusting the length Threaded pins directly on the outer tube, or welded, manufactured by rolling, i.e. without rejecting the material Lower plate available in flat or curved version Upper plate available in three versions (flat plate, with fixed cross or "U"-shaped) Highly resistant safety hook for fastening between inner and outer tube Hand-squeezing for safe con ...

Convolute (excerpt) from different tools - see picture

Doka 3-ply sheets provide the basis for many Doka formwork systems and have a wide range of uses. Doka has the right solution for all requirement, covering anything from standard applications to rentable panels. Multiple use and prevention of positive imprints through closed surface on both sides coated with high-quality melamine resin. Lower costs for finishing work based on high dimensional and angle accuracy. Type: 3-ply formwork sheet made of spruce, crosswise glue-bonded, with edge strip Surface: urea-melamine resin adhesive high degree of format accuracy

Doka 3-ply sheets provide the basis for many Doka formwork systems and have a wide range of uses. Doka has the right solution for all requirement, covering anything from standard applications to rentable panels. Multiple use and prevention of positive imprints through closed surface on both sides coated with high-quality melamine resin. Lower costs for finishing work based on high dimensional and angle accuracy. Type: 3-ply formwork sheet made of spruce, crosswise glue-bonded, with edge strip Surface: urea-melamine resin adhesive high degree of format accuracy

most spare parts, as well as control parts of all well-known manufacturers - see pictures (excerpt) list in auer-machinesdotcom >> spare parts

Mixed lot of WSP of various manufacturers Further: Scheibenfraeser MAY Scheibenfraeser SANDVIK Coromant

1 Items various drill bushes

various knife head fraesers / plan fraesers 200, 215 250 mm

various knife head fraesers / plan fraesers 280 mm

various knife head fraesers / plan fraesers 315, 400 mm More: knife head, various, 430, 450 mm

Complete, well-preserved log yard. Completely inclusive round timber feed for short and long logs, with long timber cutting and sorting, log turner, metal detector, debarking system Esterer ER 90, Bruks root reducer, and sorting line, very robustly built. Complete disposal and including the complete steel substructure and all cabling up to the switchgear. Complete control system as well as operating cab with operator station as a container solution. Simply complete Dismantling on your own

FSA Electric Pallet Truck HUB15FLEX Load capacity 1500 kg Fork length 1150 mm Tandem rollers Battery 10Ah/48V Battery Discharge Indicator Built-in charger Weight approx. 125 kg 0041 62 922 68 28

Trowalization system 2-fold Connection 400V (Opening see sketch)

Sheet Metal Curve Cutting Machine 400 V Dimensions: 140 x 40 x 100 cm

for sale Universal coolant device 230 V incl. containers, switches, plugs and hoses for mounting on lathes, drills, etc. Weight approx. 4 kg

for sale - Scissor Pallet Truck PAL JF 115 PU manual with quick-lift function Stacker trucks Load capacity 1000 kg Stroke 85 - 800 mm Fork length 1150 mm Weight approx. 115 kg further models and inquiries to FSA Maschinen AG