We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Model
(Manufacturer: BOGE)
used
Compressed air dryer, refrigeration dryer -Max. Pressure: 16 bar -Operating voltage: 380 V -Dimensions: 1050/950/H1770 mm -Weight: 556 kg
used
Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, screw block compressor stage from compressor type SL 270 -Screw block: type BS 430 -Final pressure: max. 15.0 bar -Hole circle: Ø 295 mm / M20 / Ø 740x22 mm -Shaft: Ø 100 x 200 mm -Dimensions: 1200/850/H790 mm -Weight: 917 kg
used
Compressed air tank, pressure container, pressure tank, compressed air boiler, pressure vessel, compressor tank, pressure accumulator for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, pressure accumulator with filter block from compressor type SL 270 -Pressure accumulator: Type 306022 V 230 L -Final pressure: max. 15 bar -Hole circle: Ø 240 x 22 mm -Filter units: see photos of individual components -Dimensions: 1600/980/H1270 mm -Weight: 289kg
used
Compressor control, compressor control, control panel, control box, control unit -Manufacturer: Boge, compressor control from screw compressor type VLED 30R-11A -Individual components: see photos -Dimensions: 200/110/H150 mm -Weight: 1.2 kg
used
An oil-lubricated screw compressor Boge including an air dryer unit is available. Tank volume: 350l, motor power: 11kW, max. operating pressure: 8bar, air flow rate: 1810l/min, machine dimensions X/Y/Z: approx. 2000mm/750mm/1400mm, weight: approx. 400kg. An on-site inspection is possible.
used
Compressor Boge, CL 4– used - : Ex-location prices (net): 2.950.-€ (net) Manufacturer: Boge Type: CL 4 Year of Make: 2005 approx. 4,000 operating hours Compressed air tank: Manufacturer: BWB H-Nr 540226 Volume: 90L PS 11 bar T.max: 80 degrees T.min: -10 degree K-SK 3400 Ph 16.5 bar Condition: good Available: immediately Location: Waltrop
used
used
Two identical compressors with integrated refrigerated dryer are offered. Pressure dew point: +3°C, rated power: 30kW, delivery rate (FAD): 5.31m³/min at 8bar, 4.77m³/min at 10bar, 3.86m³/min at 13bar, control: Boge Autotronic, fully automatic operation. Inspection is possible by arrangement.
used
used
feed pressure: 10.0 bar Effective free air delivery: 700 L/min motor: 400 V 0: 250 Liter weight of the machine ca.: 397 kg. total power requirement: 5.5 kW range L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price: 8.848 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
feed pressure: 10.0 bar Effective free air delivery: 1.950 L/min motor: 400 V 0: 250 Liter weight of the machine ca.: 467 kg. total power requirement: 15.0 kW range L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 13.576 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
feed pressure: 10.0 bar Effective free air delivery: 1.000 L/min motor: 400 V 0: 250 Liter weight of the machine ca.: 410 kg. total power requirement: 7.5 kW range L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 9.450 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
feed pressure: 8 bar liter capacity: 1,65 m³ / min dimensions: 1000 x 750 x 950 mm total power requirement: 11 kW weight of the machine ca.: 175 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
power capacity: ? kW feed pressure: ? bar liter capacity: ? l weight of the machine ca.: 300 kg dimensions of the machine ca.: 1,211,5 m Nr. 4324 Screw compressor BOGE S20 Currently not ready for operation - Cause unclear / unchecked Presumably fault on circuit board Transport dimensions approx. 1200 x 1000 Weight approx. 300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A complete Boge compressor system with a capacity for 16 compressors with a central control system is available. 1) Boge SLF 271 screw compressor, capacity: 30.5m³/min, cooling air volume flow: 5000m³/h, drive motor: 200kW, weight: approx. 4700kg. 2) Boge S 271 screw compressor, capacity: 30.5m³/min, cooling air volume flow: 5000m³/h, drive motor: 200kW, weight: approx. 4500kg. 3) Boge S 180 screw compressor, capacity: 20.8m³/min, cooling air volume flow: 5000m³/h, drive motor: 132kW, weight: approx. 3200kg. 4) Microfilter Boge FFP 250. 5) Refrigeration compressed air dryer Boge DS 460, capacity: 46m³/min, max. operating pressure: 14bar, weight: approx. 500kg. 6) Refrigeration compressed air dryer Boge DS 260, capacity: 20.8m³/min, max. operating pressure: 14bar, weight: approx. 240kg. 7) Boge tank, volume: 5000l, max. tank pressure: 11bar, weight: 1200kg. 8) Condensate cleaning ...
used
feed pressure: 10 bar liter capacity: 2,66 m³ / min total power requirement: 18,5 kW motor speeds:: 3000 min/1 dimensions: 1200 x 900 x 1200 mm weight of the machine ca.: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Max. pressure: 8 bar control voltage: 24 Volt total power requirement: 15 kW Number of working hours: 20.563 h - Maximum pressure: 8 bar - Delivery quantity: 2,57 m³ / min - Nominal power: 15 kW - Control voltage: 24 Volt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Max. pressure: 8 bar control voltage: 24 Volt total power requirement: 15 kW Number of working hours: 39.819 h - Maximum pressure: 8 bar - Delivery quantity: 2,57 m³ / min - Nominal power: 15 kW - Control voltage: 24 Volt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Manufacturer: Boge, Type: S 150, Year: 2004, Volume flow m³/min: 14,20-18,95, Operating hours: 24098, Running idle houres: 1190, Final compressed pressure bar: 7,5-13, Drive power kW: 110, FREE TEXT: Lüftermotor 4, Year :2004
used
Manufacturer: Boge Kompressor einheit mit Trockner und Behälter, Type: S 20-2, Year: ca.2014, Control: Boge, Screw compressors: yes, Operating hours: 8850, Running idle houres: 2500, Volume flow m³/min: 2,24, Final sealing pressure bar 1: 10, Power input kW: 15, Compressed air boiler litres: 1000, Required space L x W x H mm: 15, FREE TEXT: inkl.Drucklufttrockner und 1000 Liter Kessel und Ölwasserabscheider und Feinstfilter, Year :ca.2014
used
Manufacturer: Boge, Type: VLEA 7,5 R-7, Year: 1990, Schraubenkompressor: yes, Operating hours: 4899, Running idle houres: 1434, Revolutions of main rotor U/min: 4480, Drive power kW: 7,5, Volume flow rate m³/h: 1,05, Max. Betriebsdruck : 8, Year :1990
used
Manufacturer: Boge, Type: Flex 37-12, Volume flow m³/min: 5,1, Operating hours: 43060, Running idle houres: 2224, Final compressed pressure bar: 10, Revolutions of main rotor U/min: 5205, Drive power kW: 37, Volume flow rate m³/h: 5,1,
used
Manufacturer: Boge, Type: D 63, Control: Elektrisch, Volume flow m³/min: 375, Drive power kW: 0,96, Kühlluftbedarf m³/h: 1300, Compressed air min/max bar: 2-16,
used
Manufacturer: Boge , Type: S 90, Year: 1997, Control: yes, Screw compressor: yes, Operating hours: ca.35000, Wechselschaltung : möglich, Driving power kW 1: 65, Volume flow m³/min 1: 9,65, Available: Ende 2023, Year :1997
used
Manufacturer: Boge, Type: S 90, Year: 1997, Control: yes, Screw compressor: yes, Operating hours: ca.38000, Running idle houres: 12000, Wechselschaltung : möglich, Driving power kW 1: 65, Volume flow m³/min 1: 9,65, Final compressed pressure bar: 10, Available: Ende 2023, Year :1997
used
Screw compressor Boge 400 V 11 KW 1.45 m3/min 10 bar Accessories : belts, filters, small parts The compressor goes to fault after switching on:
used
Screw compressor C9 Flow rate 1.1 m3/min 10 bar 7.5KW Hours 9000 Schematic E-Parts Compressor is unchecked.
new
New airend BOGE BA 15 as a replacement for Termomeccanoca SCA8D-R (TM SCA 8 D-R) The installation dimensions are the same. BOGE Id.Nr.: 201021166P ( incl. gasket 60 x 60 x 2 and O-Ring-76x3-N-FKM (Viton) 75)
new
New airend BOGE BA 30 as a replacement for Termomeccanoca SCA10D (TM SCA 10 D) The installation dimensions are the same. BOGE Id.Nr.: 201021766P ( incl. gasket DN 60x D110x 2 and O-Ring-90x3-N-FKM (Viton) 75)