62 BATTENFELD used machine for sale

Material: PVC // with degassing, counter-rotor, DC motor 29 kW, screw diameter 86 mm, L/D 16 Capacity: 150 - 250 KG/hr

Cast Film CoEx System (ABA), PE / PP, Capacity: approx. 400 - 700 kg/h, Main extruder, 120 mm, co-extruder of 60 mm, screen changer, melt pump, Co-Ex block, nozzle 1,650 mm, 2-roll chill-roll smoothing unit, cooling section, extractor, double winder with cutting device and edge control, edge trim, film measuring device thickness NDC (without measuring head), incl. operating instructions and e-plans.

Material: PE, PP, PS // DC motor: 132 kW, power: approx. 300 - 500 KG/hr, screw 90mm, L/D30, strand nozzle, water bath, strand granulator.

Material: PVC // Details: DC motor 10 kW, screw diameter 52 mm, L/D 16, degassing, capacity: approx. 10 - 70 KG/hr.

warehouse no.: 501525 manufacturer: BATTENFELD Typ: Druckplatte 4505715 year of construction: 2012 We offer a mould plate / pressure plate for injection moulding machine from BATTENFELD for model HM II 4500, number 4505715. Pressure plate for injection molding machine Battenfeld HM series II 4500, Art. Nr.: 4505715th printing plates include injection molding machines to the highly stressed machine parts. The pressure plate is offered immediately from stock in Langenfeld (Rheinland), available

Battenfeld UTR 300 heating controller for control of Unilog 4000 B

Unused Control UNIROB B4 (8.4 TFT touch screen) X axis=1000 (39.4) with servo motor Y axis=1000+1000 (78.7) with servo motor Z axis=4000 (127.5) with servo motor Movement interpolation. Repetition accuracy of +/- 0.1 mm. Maximum weight including gripper: 20 kg. Pneumatic pressure: 6 bars Maximum speed: 3,000 mm/s. Interface: EUROMAP 67 - Interface: EUROMAP 67 - Control: UNIROB B4 - Stroke (X): 1.000 (39,4) with servo mm - Stroke (Y): 1.000+1.000 (78.7) with servo mm - Stroke (Z): 4.000 (127,5) with servo mm - Take-out speed: 3.000 mm/s - Payload: 20 Kg

Key data: 1100 , 40

Screw diameter; 40 mm Injectable volume: 201 cm3 Injection pressure: 1859 bar Turntable: 1040 mm Mould thickness min: 300 mm max: 600 mm Cores: 3 Robot Interface: Yes Mold Heating Zones: 8

complete screw and barrel dia. 45 mm for Battenfeld /1000 injection moulding machine is good condition

Little used screw for Battenfeld .../1900 injection unit 65 mm diameter

New screw and barrel for Battenfeld .../1900 injection unit 55 mm diameter complete with heaters and screws in the factory box.

- Battenfeld Unilog 4000 display - Battenfeld Unilog 4000 claviatura - Battenfeld Unilog 4000 TFU 400 card - Battenfeld Unilog 4000 rack - Battenfeld Unilog 4000 CPST 203 card - Battenfeld Unilog 4000 CPEA 200 card - Battenfeld Unilog 4000 ELIF 400 card - Battenfeld Unilog 4000 CC10 card - Battenfeld Unilog 4000 SNT 411 power supply - Battenfeld Unilog 4000 UTR 300 card

CALIBRATING TABLE BATTENFELD K 160 V2, 2 Speck v-pumps 4 kw / 2 sections, 16 x vacuum-connections, 12 x water-connections, Blower for drying, HAUL OFF BATTENFELD P 100 SV, 2-belt haul-off (type caterpillar), Contact 1.200 x 160 mm, Speed approx. 0,5 – 15 m/min., Motor-power approx. 4 kw, Pulling-power approx. -6.000 N maxi., SAW BATTENFELD SPR 32 P, Profile-saw upstroking, Blade Ø 300 mm, Chip/dust-suction, control panles,, Electric manuals available

BATTENFELD EXTRUSION LINE FOR PVC, EVA,.., including:, PAPENMEIER MIXER, type TSEH 200/KMSU 400 L, construction year 1991, Electrical power heating 30/35 kw - Cold 6,0/7,5 kw, including supporting structure, Total dimensions LWH : 2.4002.6502.550 mm., Weight : about 3.000 kg., BATTENFELD EXTRUDER, metal detector, feeding unit, barrel with screw 150 mm., 7 heating areas, 5 cooling fans, Assea 110 kw Drive, vacuum degassing pump, screenchanger 2x 90 mm.Ø, heating 4,0 kw, Gneuss temperature probes, hydraulic power station 2,3 kw, air pelletizer, variable speed, self adjusting knives, 1,5 kw drive, adjustable pressure, extra (Bausano cutting system with inverter), pellets cooling unit, vibrating screen with one air turbine on each side, Constructed in 1989, Documents available, offered AS IS WHERE IS or CHECKED., CUTTING: AIR

This Battenfeld cooling tank is in machine storage at Plastima Used Machinery. The vacuum tank is from 1994 and is in great condition. Brand: Battenfeld Extrusionstechnik GmbH Model: V125VA Year of construction: 1997 Tube outer diameter max: 125 mm Cooling length: 6000 mm

This haul-off machine, manufactured by Battenfeld Extrusionstechnik GmbH, is in the machine storage of Plastima Used Machinery. The machine, a model Haul-Off R630/6V, dates from the year 1990. Make: Battenfeld Extrusionstechnik GmbH Model: Haul-Off R630/6V Year of manufacture: 1990 Voltage: 380 V Power: 4,5 kW Pipe diameter max: 110 mm to 630 mm

Key data: 1000 kN

Battenfeld HM 100/525 with the Battenfeld R10S robot / Operating hours: approx. 19,000 in automatic mode Year of Make: 2008 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 100 t Handlebar spacing: 470x420 mm Size of the clamping plates: 680x663 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: approx. 19,000 in automatic mode Total number of operating hours: 26,580 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Battenfeld R10S robot Year of Make: 2015 5-axis robot: 3 axes are driven by servo motors (electric); Axis B - pneumatic, Axis C Robot with adapter Purchase of the r ...

Key data: 1000 kN

Battenfeld TM 100/525 Year of Make: 2007 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 100 t Spar spacing: 420x420 mm Size of the clamping plates: 640x640 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B2 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Dimensions: Weight: 3900 kg Length/Width/Height: 4.46x1.33x1.78 m Drive: Pumps/motor: 18.5 kW Heating capacity: 12.1 kW Total power: 30.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participa ...

Key data: 1300 kN

Battenfeld BA 1300V/315 V-R / Vertical Injection Molding Machine with the Rotary Table Year of Make: 1997 Injection unit: Screw diameter: 40 mm Injection weight: 182.9 g Spray pressure: 1575 bar Dosing volume: 201 cc Clamping unit: Clamping force: 130 t Handlebar spacing: 454x740 mm Size of the clamping plates: 815x1010 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG 4000 Additional equipment: Air Valve x 5 Hydraulic core pull x 1 Rotary table: 1250 mm The vertical injection unit - screw diameter fi 35 mm Dimensions: Weight: 7500 kg Length/Width/Height: 3.83x2.33x4.16 m Drive: Pumps/motor: 18.5 kW Heating capacity: 8.98 kW Total power: 27.48 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live te ...

Key data: 2700 kN

Battenfeld HM 270/1330H/1000H / 2K machine in very good technical condition / Operating hours: approx. 10,000 h in automatic mode Year of Make: 2006 Injection unit: Screw diameter: 55 mm Injection weight: 594 g Spray pressure: 2041 bar Dosing volume: 653 ccm Clamping unit: Clamping force: 270 t Handlebar spacing: 710x710 mm Size of the clamping plates: 1030x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B4 Additional equipment: Machine in very good technical condition 2K machine with parallel horizontal injection units Central injection Operating hours: approx. 10,000 in automatic mode Total number of operating hours: 11,876 h Control with air valve Hydraulic core pull x 3 Reinforced Injection Units – Bimetal Proportional valves on injection units - precise spraying Parallel movements Injection unit 1000H Screw diameter: 50 mm I ...

Key data: 3000 kN

Battenfeld HM 300/2250S with the Wittmann W818 robot / Machine in very good technical condition / Operating hours: approx. 40,000 h in automatic mode Year of Make: 2007 Injection unit: Screw diameter: 55 mm Injection weight: 702.5 g Spray pressure: 2500 bar Dosing volume: 772 ccm Clamping unit : Clamping force: 300 t Spar spacing: 710x630 mm Size of the clamping plates: 1030x1020 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch control panel Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runners x 8 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection New original screw and barrel are installed in the machine Robot Wittmann W818 4-axis, high-speed robot:  ...

Key data: 3000 kN

Battenfeld EcoPower SE 300/1330 / Electric Machine Year of Make: 2012 Injection unit: Screw diameter: 50 mm Injection weight: 491.4 g Spray pressure: 2470 bar Dosing volume: 540 cc Clamping unit: Clamping force: 300 t Tiebar spacing: 770x720 mm Size of the clamping plates: 1090x1170 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B6 - Touch Screen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Machine in very good technical condition Euromap 67 Robot interface Air Valve x 8 Control with hot runners x6 Hardened injection unit - Bimetal Parallel movements It is possible to change the screw diameter for fi 45, 55, 65 mm Dimensions: Weight: 14100 kg Length/Width/Height: 7.20x2.04x2.20m Drive: Pumps/motor: 0 kW Heating capacity: 22 kW Total power: 0 kW All offered machines are started by our servic ...

Spare parts for injection molding machines Spare parts electric Battenfeld Battenfeld Bachmann MF 600/1 B Nr. B 3736/01 Battenfeld Bachmann CV-A500 No. 2532/00 Battenfeld Bachmann MEM 501/S No. B 8776/00 Battenfeld Bachmann KOP 500U/S Nr. B 6786/00 Battenfeld Bachmann MEM 501 No. B 4018/00 Battenfeld Bachmann STU 500 E No. B 6448/00 Battenfeld Bachmann VID 500/S No. B 6802/00 Battenfeld Bachmann STU 500 No. B 4749/00 Battenfeld Bachmann CVA 500 Nr. B 2532/00 Battenfeld Bachmann AIO 500 No. B 2585/00 Battenfeld Bachmann AIO 500 No. 2585/00 Battenfeld Bachmann KOP 500 U/S No. B 6786/00 Battenfeld Bachmann KOP 500 U No. 2563/00 Battenfeld Bachmann CC 11/4 Nr. B 6047/00 Battenfeld Bachmann CE 32/1S No. 6144/00 Battenfeld Bachmann CE 32/1 No. B 2600/01 Battenfeld Bachmann CE 32/1S No. B 6144/00 Battenfeld Bachmann CE 32-100B Battenfeld Bachmann VID 500 Nr. B 2565/00  ...

Key data: 50 , 1 , 14

Manufacturer: Battenfeld Type: Microsystem 50 Year of production: 2000 Control: Unilog B4 Closure Type: Knee Closing force: 50 kN Maximum mold dimensions: 196 mm x 156 mm Plate Size: 196mm x 364mm Tool height: min 100 Opening Distance: 200mm Maximum distance between plates: 300 mm Screw: 14mm Stroke Volume: 1.1 ccm / 1 gram PS Injection pressure: 2500 bar General Total power: 2 kW Dimensions: 1.9 m x 0.8 m x 2.4 m weight: 1100 kg On-screen text: German Accessories: • Rotary table, • Robot integrated with the machine, • Fully electric injection molding machine, • Quality monitoring module, • Cleanroom module, • In-mold pressure control • Quiet operation of the machine • Additional 14 mm auger

BATTENFELD TM 1300 injection moulding machine was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection moulding method, in which plasticised plastic is fed into a mould and then closed with high press force. In order to achieve parts with high repeatability and durability, the machine uses many reliable components with excellent parameters, including a high-precision mould clamping system operating at a force of up to 130 tonnes. All this is complemented by the intuitive UNILOG B4 CNC control with its many useful functions, which allows programming of the operating modes in just a few steps. The TM 1300 injection moulding machine weighs 7000 kg. Technical specifications of the BATTENFELD TM 1300 injection moulding machine - CNC controll ...

Spare parts for Battenfeld injection moulding machines The parts are 100% original and functional, and above all, much cheaper than new parts • Control units •Screens • Pressure transducer • Smart cards •Modules •Power supplies •Switches •Keyboard • Temperature controllers • Amplifier Cards •Transducers • Pressure switches • Hydraulic motors • Hydraulic pumps •Manometers • Oil coolers • Proportional valves • Safety valves • Directional valves • Water faucets

Key data: 800 , 153 , 35

Manufacturer: Battenfeld Type: HM 80/350 S Year of construction: 2005 Control: Unilog B4 Closing force: 800 kN Closing type: Hydraulish Tie bar spacing: 370 mm x 420 mm Plate size: 544 mm x 544 mm Tool height: min 225 mm Opening distance: 475 mm Plate spacing max.: 700 mm Screw: 35 mm Lifting volume: 169 ccm Injection weight PS: 153.8 gram HP Injection pressure: 2083 bar general Engine: 15 kW Heating: 10,4 kW Dimensions: 3.7 m x 1.4 m x 1.9 m Weight: 4100 kg Screen text: German / English Additional equipment Robot interface Core train: x1

The BATTENFELD BA 600 CDC injection molding machine was built in Austria in 2002. It is equipped with Unilog B4 control. It has a closing force of 600 kN forms. The screw diameter is 33 mm and the injection volume is 99 cm3. The machine has plates for mounting injection molds with dimensions of 511 x 511 mm, and the clearance between the columns is 320 x 320 mm. The injection molding machine is equipped with a receiving robot, hot runners, a conveyor belt for collecting moldings, four pillows, a string of cores and technical documentation. Technical parameters of the BATTENFELD BA 600 CDC injection molding machine – control: Unilog B4 – dimensions of tool plates: 511 x 511 mm – clearance between columns: 320 x 320 mm – tool height, min. : 150 mm – opening path: 511 mm – injection pressure: 2022 bar – injection volume: 99 cm3 – injection weight: 90 g – screw  ...

Key data: 1000 , 291 , 45

Manufacturer: Battenfeld Type: BA 1000/525 TM Built: 2002 Control: Unilog B4 Closing force: 1000 kN Closing type: Knee lever Tie bar ratio: 420 mm x 420 mm Plate size: 640 mm x 640 mm Tool installation height: min 200 mm max 450 mm Opening distance: 330 mm Plate spacing max.: 830 mm Screw: 45 mm Lifting volume: 318 cc Spray weight PS: 291 gram PS Spray pressure: 1659 bar General Engine: 18.5 kW Heating: 13.8 kW Dimensions: 4.1 m x 1.3 m x 1.8 m Weight: 3900 kg Screen text: German / English Additional equipment Robot interface Core train: x2

Key data: 750 , 198 , 40

Manufacturer: Battenfeld Type: BA 750 - 350 TM Built: 2000 Control: Unilog B4 Closing force: 750 kN Closing type: Knee lever Tie bar distance: 370 mm x 370 mm Plate size: 590 mm x 590 mm Tool installation height: min 200 mm max 400 mm Opening distance: 330 mm Plate spacing max.: 730 mm Screw: 40 mm Lifting volume: 220 cc Spray weight PS: 198 gram PS Spray pressure: 1595 bar General Engine: 15 kW Heating: 12.1 kW Dimensions: 3.8 m x 1.3 m x 1.8 m Weight: 3300 kg Screen text: German / English Additional equipment Robot interface Core train: x1