176 BÜRKLE used machine for sale

Paint casting machine, paint casting station -Paint casting machine Manufacturer: Bürkle -Max. pouring width: 1290 mm -Adjustable pouring gap: via handwheel with indicator -hydraulically: height adjustable -without: paint pump -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

Veneer press Bürkle With 2 floors Type S 100 250/130 Panel size 2550 mm x 1300 mm Deck press with 2 shelves Maximum opening between the panels approx. 350 mm Hydraulic Press Cold Press Press force 100 tons. Surface pressure 3.1 kg/cm Number of cylinders 6 pieces Piston diameter 80 mm Rack and pinion guide Rated current 5.4 A Frequency 50 HZ Current type 3 PH Operating voltage 3 PH Dimensions approx. 3350 mm x 1525 mm x H 1845 mm

A Bürkle roller coater including Bürkle LZU 800 outfeed table is available. Working width: 700mm, max. mechanical feed speed: 120m/min, nominal feed speed: 25m/min, max. workpiece height: 80mm, working height range: 880mm-920mm, outfeed table length: 4000mm, operating hours: approx. 1233h. Accessories: two original Bürkle spare rollers (sealed). Documentation available. On-site inspection possible.

Working width: 1300mm, workpiece thickness min./max.: 3mm/80mm, workpiece width min./max.: 10mm/1300mm, max. workpiece length: 100mm, workpiece height min./max.: 3mm/120mm, roller application speed: 5m-30m/min, feed: 6m-30m/min. Documentation available. On-site inspection is possible.

- Manufacturer: Bürkle - Type DAL 1-1300 R - Year of construction approx. 1990 - 1993 - Working width 1300 mm - Machine is overhauled, then very good condition - Working height 870 mm - Part height 3 - 80 mm - Operating side on the right - Paint application roller 50 Shore - Dosing roller hard chrome-plated approx. 174 mm - Rubberized counterpressure cylinder - Belt transport - Length 1050 mm - Feed adjustable via handwheel 6 - 30 m/min - Total connection approx. 2 kW - Weight 3250 kg - With control cabinet - Volts, Hz 400 / 50 - Machine number 4610.17 - Commodity code 8479 8997 - Voltage fluctuations max. +/- 5 % - Images only sample images

Manufacturer: Bürkle, Type: Wellenträge Ersatzbürste, Year: ca.1998, FREETEXT1: Träger für Beizvertreiber Maschine, FREETEXT2: mit Schnellspan möglichkeit, Year :ca.1998

Manufacturer: Bürkle, Type: Bürste, Working widht max mm: 1300, Diameter of brushes: 150,

Manufacturer: Bürkle, Type: Betonpflasterlackieranlage, Year: 2007, Finished product: Oberflächenbeschichtung, Work piece width min-max mm: 1300, Destacking plant: Vakuum, Inlet conveyor: mit Ausrichstation, 1 UV dryer lamps/Watt: yes, Conveyor belt/roller: Band, 2 paint roller: Bürkle SLC 1300, 2 UV dryer lamps/Watt: yes, wast cleaning: yes, Conveyour system: Band, Stacking plant: yes, Year :2007

Manufacturer: Bürkle Lackauftragsmaschine , Type: DAL 1, Year: 1989, Control: hand, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 6-120, Operating side: rechts, Working height: 890 +-, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 6-30, kW - Leistung Transport: 0,75, Auftragswalzengeschwindigkeit m/min min-max: 6-30, Durchmesser Auftragswalze mm: 238, Dosierwalze verchromt: yes, Attachment bracket roller: yes, rbakel: yes, Year :1989

Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: 35-40, Approx. thickness of rubber coating in mm: 15, Stahlkerndurchmesser ca. mm: 200, Diameter of neck: 40, Total lenght mm: 1970, Rubber coating defective: no,

Manufacturer: Bürkle 1416 mm shore 55 gebraucht muss geschliffen werden<CRLF>Type: Lack-Ersatzwalzen, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1410, Shore Härte: ca 55, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: 180, EPDM: yes, Can be reground: yes, Application roller rubber coating mm: ca 20,

Manufacturer: Bürkle Lackauftragswalze shore 60 Länge 1336 mm NEU, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: 60, Approx. thickness of rubber coating in mm: ca.20,

Manufacturer: Bürkle Dosierwalze 1415 mm 174 mm D , Bürkle: yes, Roller rubber coating: no, Rubber coating length cm: 1410, Chromium-plated dosing roller mm: 174,

Manufacturer: Bürkle Ersatzwalze 1416 mm shore 30 prüfen muss geschliffen werden, Bürkle: yes, Roller rubber coating: 30, Rubber coating length cm: 1410, Shore Härte: 25, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: 180, Wedge follower: yes, Rubber coating defective: no, Application roller rubber coating mm: ca. 240,

Manufacturer: Bürkle Transportband ohne UV Einheit, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-80, Working widht max mm: 1400, Number of lamps: 1, kW power 1 lamp: 11, Lampenlänge mm: 1400, Reflektor von oben abnehmbar: yes, Gesamtlänge UV Modul mm: 2500, Lamps straight installation: yes, Conveyor: 6-30,

Manufacturer: Bürkle Lackauftragswalze 1415 mm shore 60 25 mm Gummi , Bürkle: yes, Rubber coating length cm: 1416, Shore Härte: 60, Approx. thickness of rubber coating in mm: 25,

Manufacturer: Bürkle Zentrierollengang, Year: 2002, Control: no, Working length mm: 4500, Working widht mm: 1400, Engine power kW: 0,75, Durchmesser Rolle mm: 75, Rollenmittenabstand: ca.200 mm, angetrieben über Flachriemen: yes, Stop straightedge: yes, Pneumatically controlled: yes, Anschlaglineal verstellbar: yes, Anschlagkante Höhenverstellbar: no, Freilaufrollen: no, Year :2002

Manufacturer: Bürkle UV Trockner, Type: UV Modul, Year: 2001, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 100, Number of lamps: 1, kW power 1 lamp: 80 W/cm, Lampen gerade eingebaut: yes, Adjustable: no, Position of lamps: gerade, Conveyor lenght mm: 5000, Chain pitch mm: 76, Drive power kW: 1,1, Working height in mm: 950 +/-, Through running hight mm: 3-80, Feedin speed m/min: 5-25, Rod transportation: yes, Year :2001

Manufacturer: Bürkle Lackersatzwalze 1416 mm shore 50 Gummi muss geschliffen werden, Spare roller: DAL SLC, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: 50, Approx. thickness of rubber coating in mm: ca.25,

Manufacturer: Bürkle Lackwalze 1416 mm 30 shore 25 Gummi<CRLF>Gerillt , Roller rubber coating: gerillt, Rubber coating length cm: 1416, Shore Härte: 30,

Manufacturer: Bürkle Lackauftragswalze 1416 mm ca 25 mm Gummi shore ca 25 Ersatzwalze Neu, Spare roller: SAL/SLC/DAL, Bürkle: yes, Roller rubber coating: 238, Rubber coating length cm: 1415, Shore Härte: ca.25, Approx. thickness of rubber coating in mm: 30, Stahlkerndurchmesser ca. mm: 187, Creasing on a 1 cm: walze ist gelasert, Wedge follower: yes, Rubber coating defective: neu,

Manufacturer: Bürkle Lackwalze 1416 mm 30 shore muss geschliffen werden, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: ca 30, Approx. thickness of rubber coating in mm: 25, Stahlkerndurchmesser ca. mm: 186,

Manufacturer: Bürkle Ersatzlackwalze 30 shore 1300 mm 80 Gang gerillt Neu<CRLF>Type: Lack-Ersatzwalzen, Spare roller: DAL/SAL/SLC, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1420, Shore Härte: ca.40, Approx. thickness of rubber coating in mm: ca.20, Stahlkerndurchmesser ca. mm: 187, Creasing on a 1 cm: 80 Gang/gerillt,

Manufacturer: IST , Type: UV Trockner, Year: 11.1997, Work piece width min-max mm: 10 - 1.300, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 3 - 80, Working widht max mm: 1.300, Number of lamps: 1, kW power 1 lamp: 10, Lamps straight installation: yes, Adjustable: halblast, Power per lamp watt UV: 80, Conveyor lenght mm: ohne, Conveyor lenght mm: ohne, Year :11.1997

Manufacturer: Bürkle Lackersatzwalze 1416 mm 40 shore neu geschliffen, Spare roller: DAL SLC, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: ca.40, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: 197,

Manufacturer: IST, Type: UV Trockner, Year: 11.97, Work piece width min-max mm: 10 - 1.300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 3 - 80, Working widht max mm: 1.300, Number of lamps: 3, kW power 1 lamp: 10, kW power all lamps: 30, Lamps straight installation: yes, Adjustable: halblast, Power per lamp watt UV: 80, Conveyor lenght mm: ohne, Conveyor lenght mm: ohne, Year :11.97

Manufacturer: Bürkle Lackgiessanlage, Control: hand, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 3-120, Working widht max mm: 1300, Operating side: links, Working height: 920, Pump system: Rührwerk, FREE TEXT: bald verfügbar,

Manufacturer: Bürkle , Spare roller: SLC/DAL, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: ca.45, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: 187, Can be reground: yes,