ŠKODA 160 used machines

2 pieces Rheinhütte - pumps

Inlet width: 1,600 mm Inlet height: 550 mm Rotor diameter: 1,600 mm Chopping knife count: 4 pieces Counter-knife count: 1 piece Feed unit: 2 x 5 rollers Drive: 2 x 250 kW Machine weight: approx. 34,000 kg

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 1600 Year of construction: 2018 Operating hours: approx. 400 Specifications: Drive power: 2 x 55 kW Sieve: 35 mm hexagonal Screen design: solid screen basket, reinforced with ribs, including sieve quick-change device Counter knife: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and level sensor (Sonar Bero) Transmission: Compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor aircraft: 600 mm Rotor design: 4 rows (76 pieces) positive inserts 60 x 60 mm on tool holders Rotor bearing: Standing bearing Machine floor and slide bottom: grooved Weight: approx. 13,400 kg Universally applicable shredder for a wide variety of materials The ZTLL shredder is the result of more than 35 years of kn ...

IMEAS grinding cabin RCI/160 - RCS.2T/160 consisting of a lower and an upper satin finishing machine with two rollers.

Reference ID PP-47933 Category Flexo Printer Manufacturer Bobst Model 160 A-Matic and Flexo 160 Year Built 1994 Color 2 Speed 6500 sheets/h Max. size 1,600 x 1,100 mm Min. size 600 x 520 mm Condition Good Location Europe Availability - Machine Description BOBST 160 A-MATIC CUTTING MACHINE Sheet sizes: - Maximum cutting size: 1,600 x 1,100 mm - Minimum cutting size: 600 x 520 mm Cutting size with front waste: - Maximum cutting size: 1,600 x 1,075 mm - Minimum cutting size: 580 x 492 mm - Gripper margin adjustable: 15 +/- 3 mm - Thickness of corrugated board up to 9mm - Thickness of solid board from 1mm - Cutting force, maximum: (400 tons) 4MN - Production speed: up to 6.500 sheets per hour Construction year: 1994 Production country: SWITZERLAND Voltage: 480 V Frequency: 50 Hz 2 COLORS UNIT BOBST FLEXO 160 Sheet sizes: - Maximum cutting size: 1,600 x 1, ...

TIG and Electric Welding Machine / Inverter ESAB Type LTN 160WIG Welding Machine for TIG and ElectrodeFabr. No. 405-423-0479 Year of construction approx. 2010Power TIG 160 Amp. = 35% ED 110 Amp. = 60% ED 80 Amp. = 100% EDL power electrode 140 Amp. = 35% ED 110 Amp. = 60% ED 80 Amp. = 100% EDNetz connection 230 Volt, 50 Hz, Schuko plug- stepless power adjustment- 2 stroke and 4 stroke operation- Operating mode rod electrode- 12 meter TIG hose package with hand torch- only DC = DC- HF ignition-

Used hot air generator with oil burner Ready for operation at the site

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, face milling cutter head, shoulder milling cutter -Type: R 282.2 160 -Hole diameter: 40 mm / bolt circle diameter 67 x 14 mm -Dimensions: Ø 160 x 62 mm -Weight: 4.9 kg

Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Type: 8230-160/5 -Outside: Ø 160 mm -Bolt circle: Ø105 mm -Mounting: Short taper 5, cone Ø 79 - 82 mm -Dimensions total Ø 160 x 65 mm -Weight: 2.2 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Festo, standard cylinder double-acting type DNG-32-160-PPV-A -Stroke: 160 mm -Piston: Ø 63 mm -Piston rod: Ø 12 mm -Max. pressure: 12 bar -Quantity: 3 pieces available -Price: per piece -Dimensions: 308/50/H50 mm -Weight: 1.0 kg/piece

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DSBC-80-160-PPVA-N3 -Stroke travel: 160 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm / M20 -Hole: Ø 20 mm -Max. pressure: 12 bar -Quantity: 1 cylinder available Price: per piece -Dimensions: 520/95/H170 mm -Weight: 5.2 kg

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, round cylinder type DSNU-20-160-PPV-A 19241 -Stroke travel: 160 mm -Piston: Ø 20 mm -Piston rod: Ø 8 mm / M8 -Max. pressure: 10 bar -Number: 7 cylinders available - Price: per piece -Dimensions: 290/35/H32 mm -Weight: 0.3 kg/piece

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, round cylinder type DSNU-20-160-PPV-A 19241 -Stroke travel: 160 mm -Piston: Ø 20 mm -Piston rod: Ø 8 mm / M8 -Max. pressure: 10 bar -Quantity: 1 cylinder available -Dimensions: 290/27/H55 mm -Weight: 0.3 kg

Dear Sir or Madam, we have now available used transformer stations Year of construction : 2001-2002 Power : 1600KVA Primary voltage : 20kV Secondary voltage: 690V, Switching group: DYN5 Switchgear: SF6 total weight per station is 12.5 tons Dimensions: Length = Width = Height = Immediately ready for use and available, nationwide cheap delivery. If you have any further questions, Mr. Schmidt Techn. Purchasing is there for you, available Monday to Saturday from 8 a.m. to 10 p.m. and in case of emergency 24 hours

Garvens Automation continuous weighing scale 1600-1150-950 RA1975 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Manufacturer: Garvens Automation Type: SL 100 ID1 Year of construction: 1996 Machine type: automatic checkweigher Total size: approx. 1600 x 1150 x 550 mm (WxDxH) Electrical connection (Plug and Play) Nominal voltage: 380V and 220V Nominal frequency: 50Hz / 60Hz (+/-2 %) Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g Conveyor belt 1600-1150-950 and SEW gear motor with frequency converter Conveying length (FL): 1600 mm effective width (NUB): 1150 mm belt width (GB): 950 mm Motor Type: SEW Gearmotor with frequency converter Motor Power: kW 0.55/0.55 Speed: 0,02-1,2 m/s Feat ...

Used machine in good condition. Available for immediate delivery. - Screw diameter: 50 mm - Clamping force: 1.600 kN - Shot weight max: 297 g - Injection pressure: 2.080 bar - Injection volume: 353 cm? - Screw L/D ratio: 20 - Ejector stroke / force max.: 225 / 66 mm / kN - Mould opening stroke max: 650 mm - Mould height min: 250 mm - Daylight between platens max: 900 mm - Platen size (h x v): 685 x 685 mm - Distance between tie-bars (h x v): 470 x 470 mm - Operating hours: n/a - Power: installed max: ? 30 kW - Weight: 6.630 kg - Dimensions (long x wide x high): 5.000 x 1.615 x 2.110 mm

2025 BIG embankment bucket 160cm with OQ45-5 attachment, Technical specifications:, - Weight: 216 kg, - Recording width: 160 cm, - Contents: 279 liters, - CAT 5 - suitable for 5.6 - 9 t excavators

Used Spiral Mixer with Bottom Emptying DIOSNA, Type: SP 160 E -In Bakery Condition- - with bottom emptying - Kettle capacity: 160 kg dough -El. Connection: 400 V, 50 Hz, 20 kW - Condition: Good, technically tested, run in the bakery until the end Visits and test runs are possible by arrangement.

Leda Mattiello Extrusion line 160 mm 50 LD 2 degassing pumps, under refurbishing, ENERGY SAVING IR heaters, for PP PS PE ABS PC, etc., Very good quality extruder, 3 m3 ca. storage silo, crammed vertical screw for light materials with adjustable speed,, extruder with 160 mm. screw, 50 L/D, ** n.8 Infra Red Petrelli Heaters x 11 kw each V.380 - for great energy saving, 315 kw a.c.Sever drive with inverter (about 60% power used in work), Gefran inverter, n.2 vacuum degassing pumps, semi-automatic screen-changer 320 mm Ø screens (possible configuration with fully automatic scren-changer), horizontal water ring pelletizer - or different, drying centrifuge, closed water cycle, Zambello gearbox with oil recirculating pump, oil-water heat exchanging unit, Control cabinet for managing the whole line including thermoregulators, etc., Nominal throughput rate 800-900 kg./h depending on material., T ...

Servo motor, electric motor, DC motor, pitch motor, pitch drive, rotary encoder, tachometer, encoder, -Manufacturer: RUCKH -Type: Pitch GM 160M-4 -SAP no.: 48587 -Power: 7.5 kW -Max. Speed: 1600 rpm -Voltage: 288 V -Brake: was removed -Fan: -Construction: B5 -Tachometer: -Shaft: toothed Ø 42 x 50 mm -Dimensions: 870/380/H575 mm -Weight 155 kg

Servo motor, electric motor, DC motor, pitch motor, pitch drive, rotary encoder, tachometer, encoder -Manufacturer: RUCKH -Type: Pitch GM 160M-4/SSB -SAP No .: 56418 -Power: 7.5 kW -Max. Speed: 1600 rpm -Voltage: 288 V -with brake/fan/encoder -Construction: B5 -Shaft: Ø 42 x 50 mm -Dimensions: 870/370/H555 mm -Weight: 171 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Müco, single-phase transformer type EST 160 -Power: 160 VA -Voltage: 230V 50/60Hz -Technical data: see photo type plate -Dimensions: 100/80/H100 mm -Weight: 2.3 kg

Linear drive, linear gear, lifting gear, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, linear drive type DGE-40-1600-ZR-RF-LH-RK-GK -Stroke length: 1600 mm -Servo motor: Festo type EMMS-AS-70--S-RM -Planetary gear: Neugart PLE 80 -Number: 4x linear drive available -Price: per piece -Dimensions: 2240/130/H410mm -Weight: 24.5 kg/piece

Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane undercarriage, crane undercarriage, trolley -Manufacturer: Konecranes, electric chain hoist with powered trolley -Chain hoist: Type XN10 1604 b1 load capacity 1600 kg -Main stroke: 4 m/min -Fine stroke: 1 m/min -Hook path: 5.4 m -Crane chassis: TDV 1600 20/5 m/min -Carrier width: max. 310 mm -Dimensions: see photo technical drawing -Transport dimensions: 1200/700/H550 mm -Weight: 110 kg

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Oerlikon, Inverter welding machine type CITISTICK 160 -Welding current range: 5-160A -Mains connection: 230V -Accessories: Welding cable with electrode clamp, ground cable -Dimensions: 430/300/H340 mm -Weight: 11 kg