WEISHAUPT wm used machines

- Manufacturer: Weishaupt, - Type: WM - G30/3-A, - Version ZM, - Gas and dual fuel burners for heat supply and industrial plants, - Power 600 - 5700 kW, - Year of construction 2013, - Operating hours 26,600, - Connection pressure: 15 - 500 mbar, - Control voltage 230 V, 50Hz, 10 A, - Mains voltage 400 V, - Electrical power 16.79 kW, - Protection class IP 54, Sliding-stage or modulating power control (ZM):• The power is adjusted glidingly between partial and full load via actuators depending on the heat requirement• The two load points are approached continuously. There is no sudden switching on or off of large amounts of fuel, Weishaupt gas and dual-fuel burners WM 30 are suitable for intermittent operation and continuous operation on:, • Heat generators according to EN 303, • Hot water systems, • Hot water systems, • Steam boiler, • Warm air generators, • Certain process ...

A Bosch steam boiler with Weishaupt oil burner is available. 1) Bosch ECO 1, year of manufacture: 2021, volume: 51l, max. permissible pressure: 31bar, test pressure: 51bar, max. temperature: 238°C, heat output: 87kW. 2) Bosch UL-S 2000, year of manufacture: 2021, volume: 3315l, max. permissible pressure: 13bar, test pressure: 24.7bar, max. temperature: 195°C, steam output: 2000kg/h. 3) Weishaupt WM-L20, year of manufacture: 2021, oil output min./max.: 275kW/2000kW, heating oil pressure: 30bar. Including Siemens Simatic HMI control, water treatment, economizer and attachments. Documentation available.

An old steam boiler Loos including a relatively new Weishaupt burner is available. 1) Steam boiler Loos UL-S, year of manufacture: 1991, steam output: 6000kg/h, max. operating overpressure: 13bar, boiler volume: 6380l. 2) Weishaupt burner G50/2-A, year of manufacture: 2013, output range: 600kW-5400kW, connection pressure range: 15mbar-500mbar. Documentation available. An on-site inspection is possible.

Large steam generator LOOS, type: UL-S including gas burner WEISHAUPT G50/2-A - LOOS steam generator, built in 1991 for 6,000 kg of steam / h - Steam capacity: 6,000 kg/h - WEISHAUPT burner, built in 2013 - Burner power: 600 - 5,400 kW Viewing possible on request.

Weishaupt monarch L5Z steam generator, heating oil

WEISHAUPT FUEL BURNER - IN WORKING ORDER - LITTLE USED -

Weishaupt Dual Fuel Burner -mu Type WM-GL20/4-A with digital combustion manager WFM Version ZM-R-3LN (SuperLowNox) Power range (N-gas) 300 - 2450 kW Power range (EL) 350 - 2450 kW Fully automatic on the oil side and gas side in a sliding step or modulating depending on the type of power control. Control range on the gas side up to 1:8 possible. Control range on the oil side up to 1:5 possible. for the combustion of heating oil EL according to DIN 51603 and natural gas according to DIN DVGW worksheet with the following components: Burner housing Blower with three-phase motor Integrated speed module for controlling Frequency converter (included) Combustion air control with drive Fuel system best. made of high-pressure gear pump with Pressure regulating valve, electrosolenoid valves as Quick-closing device nozzle stock and nozzle Magnetic coupling for shutting off the oil ...

Manufacturer: Weishaupt Type: WM-G20/3-A Number of pieces: 2 pcs. Year of construction 2019 Power: 2000 kW Location: Wuppertal

Loos International Weishaupt Brenner 1700 L Volume 1500-1630 KW 6 Bar 110 Degree Temp. Year of construction 2003

WEISHAUPT RGL 40/2-A BURNER Power: 500 - 3400 kW Available: Immediately Description: - Execution: ZM - Gas Type: N / Category II - Connection Pressure: 100 - 4000 mbar - Heating Oil: EL according to DIN 51 - Oil Throughput: 55 - 286 kg/h The burner burns both natural gas and heating oil. It was in daily use until it was decommissioned. The burner was maintained annually and is fully operational. Find more here - / Contact us at -

A complete painting system is available. Components: (1) overhead conveyor, (2) spraying area/brush wall, length: 4000mm, width: 1500mm, height: 4800mm, with Maxon burner, suction pipe, drawers for dry paint disposal, six filter mats, various filters, (3) evaporation area, (4) drying booth, length: 6500mm, width: 5200mm, height: 3150mm, with Weishaupt WG10N/1-D ZM-LN gas burner. Overall system dimensions: 24,000mm/10,000mm, max. output: 45kW. Documentation is available.

Three burners are available. 1) Elco. 2) Seibold WV 500, year of construction: 2022, fuel: light oil EL, calorific value: approx. 10kWh/l, fuel flow rate: approx. 160l/h, nominal heat output: 1600kW, pilot burner fuel: propane, propane calorific value: approx. 26kWh/nm³, propane pre-pressure: 100mbar, max. chamber temperature: 270°C, max. chamber pressure: 3mbar. 3) Weishaupt, year of construction: 1999, output range: 474kW-2491kW. On-site inspection is possible.

Two Weishaupt gas burners including two WMG boilers are available. Output: 2x3.3MW. Documentation available. An on-site inspection is possible.

Some small equipment is available. 1) Water treatment system BWT, year of manufacture: 2006, tanks: 2, max. operating pressure: 10bar, max. test pressure: 11bar, max. operating temperature: 50°C, volume: 48l, control system: BWT Soft-Control II. 2) Weishaupt burner L1Z-B, year of manufacture: 2008, power range: 70kW-415kW. 3) Wet cooler. An on-site inspection is possible.

An originally packaged Weishaupt burner is available. Thermal output range: 145kW-570kW, flame head: W40/1, typical pump pressure setting: 12bar, weight: approx. 40kg. Documentation available. An on-site inspection is possible.

Mobile container heating system Year of construction 2023 Original price: 178.500,- € gross Boiler Buderus GE615 Power: approx. 511–570 kW Burner Weishaupt WM-L10/3-A Monarch Oil burner (tbsp heating oil) Regulation Buderus Logamatic 5311 Other components Two large heating buffer tanks Chimney outside Hydraulics complete in the container Connection cables for heating network Location of the machine: 76661 Philippsburg The facility can be visited on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.

Electric motor, three-phase motor -Power: 0.76 kW -Speed: 3000 rpm -Shaft diameter: 14 mm -Construction: B5 -Protection class: - -Dimensions: 285/195/H215 mm -Weight: 10 kg

Fuel: Natural gas, power range: 100kW-1000kW, connection pressure range: 15mbar-500mbar, NOx class: 2. An on-site inspection is possible.

Additional title: gas burner for steam generator, Min. capacity: 900 kW, Max. capacity: 5100 kW, Min. pressure: 10 mbar, Max. pressure: 140 mbar

Many thanks for your interest on our second hand machines, please find follow our offer: Complete Waffle production plant, consiting of: manufacturer : Danger Wafer oven Type : WM 52 plates YOM : ca. 1975 - 1980 heating : natural gas or propane waffle sheet : 470x290 mm deep karee different : automatic sheet take off : Cooler and Fully automatic Hebenstreit WZ-EM wafer spread line for two colours manufacturer : Hebenstreit Type : WZ-EM YOM : 1991 output capacity : up to 50 sheet/min. wafer format : 290 x 470 mm bis 350 x 480 mm dimensions : ca. 11000 x 1300 x 1700 mm different : Film- und Kontaktstreichverfahren consisting of: - wafer magazine - First WZ Cream station - cover station - second WZ cream station - stack station - cover station - Pressing device We offer this machine in 'as is' condition, without warranty, ex Ware ...

Scale with conveyor belt Brand Sartorius Built in 2006 Type: WM6FDP-1000Q Up to 6 kg Conveyor belt speed: 15-36 m/min Bandwidth: 300mm - Calculation and display of weight values (RS-232C) - 100 product storage - Fixed weight values in dynam. Operation - TCP | IP, RS-422 and RS-485 can be used via external cartridges

Prallbrecher Prallmühle Steinbrecher Einwellenshredder used Manufacturer: HAZEMAG / KLEEMANNs Type: WMS 800/1 Rotor diameter: approx. 800 mm without a fallback mechanism Filling shaft approx. 800 x 600 mm Ejection shaft approx. 1200 x 800 mm Dimensions without motor: approx. 2600 x 2300 x 2300 mm The drive succeeds via V-belts and can be individually adapted to the requirements.

Machine Details Warehouse number 1105-03654 Machine Type Machining Center - Vertical Make ycm SUPERMAX Type wmc 1100 a Year of construction 1994 Control type CNC Storage location FRANCE Country of origin Taiwan Delivery time immediately Freight base EX WORK Technical details x-travel 1100 mm y-travel 600 mm z-travel 630 mm CNC control FANUC OM Table size 1200 x 600 mm Spindle holder ISO 40 bt Spindle speeds 45 - 8000 1/min Spindle drive motor 11 ( 30 min ) kW Tool changing device for 30 tools table load 1200 kg Projection 630 mm Operating voltage 380 V Rapid traverse speed 12 m/min Feed range 1 - 5000 mm/min Machine weight approx. 6.6 t Space requirement approx. 2.90 x 2.60 x 2.50 m Information - Control: FANUC o M - Coolant device MAGAZINE 30 COMPARTMENT DOUBLE ARM

BRAND: FLOW YEAR: 2007 MODEL: WMC2 4030 PRODUCTION HOURS: 4247 APPLICATION TYPE: WATER CUTTING LOCATION: CZECH REPUBLIC MACHINE TYPE: WATERJET CUTTING MACHINES AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: FLOW MODEL: FLOWMASTER 6.0 MOVEMENT X-AXIS MOVEMENT: 4000 MM Y-AXIS MOVEMENT: 3000 MM MEDIA PUMP DRIVE POWER: 4150 ADDITIONAL EQUIPMENT - ABRASIVE MATERIAL 5 TONS - SPARE HIGH-PRESSURE PUMP 37 KW - SPARE PARTS - CANTILEVER RACK Additional Information MACHINE HISTORY MATERIAL TYPE: PLASTICS, STEEL MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - WATER TREATMENT SYSTEM - ABRASIVE MATERIAL HOPPER - INCL. ADS (ABRASIVE DELIVERY SYSTEM) - PASER ECL CUTTING HEAD - FLOW CAD 6. 0 SOFTWARE - FLOW MASTER 6. 0 SOFTWARE - THE RACK SYSTEM IS INCLUDED QUALITATIVE MACHINE BENEFITS: - REGULARLY SERVICED AND IN A VERY GOOD CONDITIO ...

BRAND: FLOW YEAR: 2003 MODEL: WMC 2 4020 MACH 4 PRODUCTION HOURS: 6580 APPLICATION TYPE: WATER CUTTING LOCATION: GERMANY MACHINE TYPE: WATERJET CUTTING MACHINES AVAILABILITY: IMMEDIATELY GINDUMAC ID: DE-WAT-FLO-2003-00001 Technical Information GENERAL DATA MEASUREMENTS WIDTH: 4000 MM MEASUREMENTS DEPTH: 2000 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - 78000 PSI PUMP 75KW - FLOW SOFTWARE INCLUDED FLOW MASTER 6 - TWO HEADS - ONE INSTALLED + READY TO USE, ONE AVAILABLE AS A SPARE PART