v trade accessories for machine tools used for sale

thickness of jaw: 160 mm total power requirement: - weight of the machine ca.: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 100 mm total power requirement: - weight of the machine ca.: - daylight opening: 90/105 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 0600 mm table width: 420 mm table height: 300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 038 mm total power requirement: - weight of the machine ca.: - clamping width: 75 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 088 mm total power requirement: - weight of the machine ca.: - clamping width: 125 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 073 mm total power requirement: - weight of the machine ca.: - clamping width: 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 063 mm total power requirement: - weight of the machine ca.: - clamping width: 90 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tol measurements: - weight max.: - range L-W-H: 960x650x840 mm tool adaptor: ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mm table width: 800 mm table height: 560 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 160 mm total power requirement: - weight of the machine ca.: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tol measurements: - weight max.: - range L-W-H: 960x650x840 mm tool adaptor: ISO 50 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 098 mm total power requirement: - weight of the machine ca.: - clamping width: 125 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 073 mm total power requirement: - weight of the machine ca.: - clamping width: 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 600 mm : 500 mm : 400 mm : 1000x500 mm : 1200x250 mm : 40-3200 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1050 mm : 480 mm : 550 mm : 1524x380 mm : SK 40 : 127 mm : 105 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 200 mm total power requirement: - weight of the machine ca.: - daylight opening: 310 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 130 mm total power requirement: - weight of the machine ca.: - daylight opening: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 130 mm total power requirement: - weight of the machine ca.: - daylight opening: 100/110 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 160 mm daylight opening: - total power requirement: - weight of the machine ca.: 115 - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 100 mm total power requirement: - weight of the machine ca.: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 mm : 1275 mm : 1330 - : MK 5 bore depth: 270 mm spindle turning speed range: 44-1206 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 585/600 mm : 465/480 mm : 385/400 mm : 900x500 mm : 1200x250 mm : 40-2000 U/min : SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35 mm throat: 320 mm bore stroke: 160 mm no. of turning speeds: stufenlos Stufen spindle turning speed range: 65 - 460 / 460 - 3250 U/min feeds: 0,1 - 0,2 - 0,3 mm/U spindle taper: MK 4 table surface area: 500 x 420 mm base plate: 650 x 450 mm Distance spindle/table max.: 500 mm column diameter: 120 mm distance spindle/base plate: 1100 mm Total height: 2200 mm voltage: 400 V / 50 Hz drive motor: 1,5 kW coolant pump drive: 0,2 kW total power requirement: 1,7 kW weight of the machine ca.: 0,550 t dimensions of the machine ca.: 0,6 x 0,8 x 2,2 m Industrial, gear-driven drilling machine, with coolant device, adjustable drilling depth, left-hand and right-hand rotation of the spindle, motor with 2 speeds, work light, table can be rotated and tilted, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25319 Specifications: - Drilling capacity in steel ST 60 35 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 160 mm - Drilling spindle speeds 65 - 3250 rpm - 3 feeds 0.1 / 0.2 / 0.3 mm/rev - Projection 320 mm - Max. distance table - drilling spindle 560 mm - Table with 2 T-slots 500 x 420 mm - Height adjustable via rack with hand crank - Table left + right tiltable - Drive 400 V / 1.5 kW - Space requirement approx. W 550 x H 2200 x D 900 mm - Weight approx. 550 kg - with: - Right – Counterclockwise - Coolant device -Lighting

: 600 mm : 500 mm : 400 mm : 1000x500 mm : 1200x250 mm : 40-3200 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 600 mm : 500 mm : 400 mm : 1000x500 mm : 1200x250 mm : 40-3200 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 420 mm : 220 mm : 380 mm : 840x390 mm : 950x250 mm : 65-2600 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 600 mm : 500 mm : 400 mm : 1000x500 mm : 1200x250 mm : 40-3200 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1200 mm : 580 mm : 600 mm : 1575x425 mm : SK 40 : 152 mm : 110 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 420 mm : 220 mm : 380 mm : 840x390 mm : 950x250 mm : 65-2600 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 420 mm : 220 mm : 380 mm : 840x390 mm : 950x250 mm : 65-2600 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 420 mm : 220 mm : 380 mm : 840x390 mm : 950x250 mm : 65-2600 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Article: profile turning trip dog Manufacturer: Schütte Many different sizes for Schütte profile turning attachment 68AE Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

pickoff with shaft for Schutte multi spindle automatic lathe SF67, used pickoff C26GF pickoff shaft C26GF9S1 gear WG-67S Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: draw bar Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: quadrant lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: feed lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: push rod Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: push lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: pickoff with shaft Manufacturer: Schütte pickoff with shaft for Schutte multi spindle automatic lathe SF67 pickoff C26GF pickoff shaft C26GF9S1 gear WG-67S holder B73GF1S1 Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

polygon turning unit for Schutte AG20, used 1 polygon turning unit type Saco SC 15.22.001-Nr.3 1 cardan shaft type Saco SC 15.52.188.00 1 gear box SC 15.22.001-Nr. 3 Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Auction-ID: A1-41278-922

Auction-ID: A7-48215-77

Face plate, face plate chuck, face launder chuck Pos. 1 --> Outer Ø: 400 mm --> Inner Ø: 160 mm --> Height: 100mm --> T-slots: 6 pieces Pos. 2 --> Outer Ø: 400 mm --> Inner Ø: 140 mm --> Height: 60mm --> T-slots: 3pcs, Pos. 3 --> Outer Ø: 300 mm --> Inner Ø: 100 mm --> Height: 94mm --> T-slots: 6 pieces Pos. 4 --> Outer Ø: 400 --> Inner Ø: 100 mm --> Height: 60mm --> T-slots: Auction-ID: A1-48483-85

Face plate, face plate chuck, face launder chuck Pos. 1 --> Outer Ø: 200 mm --> Inner Ø: 80 mm --> Height: 50mm --> T-slots: 6 pieces Pos. 2 --> Outer Ø: 250 mm --> Inner Ø: 100 mm --> Height: 100mm --> T-slots: 6 pieces Pos. 3 --> Outer Ø: 300 mm --> Inner Ø: 100 mm --> Height: 50mm --> T-slots: 6 pieces Pos. 4 --> Outer Ø: 300 mm --> Inner Ø: 100 mm --> Height: 100mm --> T-slots: 6 pieces Pos. 5 --> Outer Ø: 300 mm --> Inner Ø: 100 mm --> Height: 100mm --> T-slots: 6 pieces Auction-ID: A1-48483-84

Centering tip with bead nut Auction-ID: A1-48483-101

Auction-ID: A1-48580-65

Auction-ID: A1-48580-68

Auction-ID: A1-48580-70

Auction-ID: A1-48580-66

Ingot / Bar Casting Moulds and Foundry Equipment General data: Equipment type: Casting moulds and handling tools for aluminium Application: Aluminium ingot / bar casting Main components: Long rectangular refractory-lined moulds (for aluminium bars/ingots) Multi-cavity cast iron moulds Smaller block-type moulds (stacked, for small ingots or test pieces) Handling tools: Manual ladles for pouring molten metal Tongs, rods, and skimming tools Additional equipment: Steel working table / rack Custom frame for holding moulds during pouring Description: Complete set of casting moulds and auxiliary equipment used in aluminium foundry operations. The system includes various mould types for producing ingots and bars, along with manual handling tools and support structures for efficient and safe casting processes. Auction-ID: A7-48441-19

WITHOUT cabinet Auction-ID: A7-48588-8

Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...

Transmission belts, drive belt, flat belt, leather belt, belt, transmission belt FROM leather, fabric, rubber, plastic direct from the manufacturer! All dimensions and qualities according to your possible! We customize for you and look forward to your inquiry!

Convolute (excerpt) from different tools - see picture

weight: . kg taper MK: .. Different jaw sizes and makes. Price information is not possible without a visit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Including cabinet LxWxH: 730x720x1050mm Auction-ID: A1-48232-170

Pneumotec Workpiece Accumulator PWS 100 Year of construction: 06/2013 Plate diameter 220 mm Number of plates: 20 pieces Height 1200 mm +/-100 mm adjustable Width 780mm Length 3150mm

Precise 0,6kw ESC 3043 +Control Unit 50k 1min. pneum. Tool change D.4mm Total weight 15kg. Only the spindle without cable weighs approx. 3.5kg Pneumatic collet/tool change. Diameter 4.00mm Max. speed 50,000, minimum 10,000 is specified. According to the controls, however, it somehow goes up to 6000 down. Water cooling is necessary during operation, this is all described in the original operating instructions. Water cooling is not included. The requirements are described. There is at least talk of liquid cooling on the technical drawing. Very good used condition, full function. You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice. 24 63 87 F1448 (internal article number)

suitable for Peddinghaus profile steel shears Effective length 2,000 mm

Universal plan and boring head ISO - 50 recording

3-points Steady Ø 350 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Width: 1200 mm Thickness: 300 mm Total height: 1300 mm Weight: approx 250 kg

Touches 3-points Steady Ø 800 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 800 mm Base dimensions: L 635 x W 300 mm Distance between fixing V: 480 mm Width: 1600 mm Thickness: 350 mm Total height : 1500 mm Weight: approx 250 kg

Revolving Center MK - 5 with changeble points

type: -- mm tool adaptor: - weight: - kg centre height: -- mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 15.000 kg height: 790 - 1350 mm width: 1200 mm weight: 65.0 kg Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - with height adjustment - CE marking techn. Details: - Height: 790 mm - Width: 1200 mm - Load capacity: 15 to - Height adjustment: 790 - 1350 mm - Support surface: 120 x 120mm - Space requirement approx .: 1350 x 720 x 1350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 5.000 kg height: 800 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 60 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 5.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 2.000 kg height: 800 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 50 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 2.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 20 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 4 x 180 kg Mixing ratio: . 0 fertility: . 0 4x 180 KG The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 4 x 204 l Mixing ratio: . 0 fertility: . 0 4x 180 KG The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WKZ spindle SK40 Used

Radius grinding device for DECKEL S11 grinding machine – ISOG ref: 2601X00

max. load: . kg 0: . 0 weight: . kg The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us Morehe tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forwar ...

These include: rotating centers, drill heads and T-wrenches on and with steel mobile cabinet Auction-ID: A1-48414-30

DATA ON THE MACHINE Machine type: Machine landing gear / Tank rolls Manufacturer: HTS Model: ECO-Skate I30L-I30S / 6t payload Built: 2020 Condition: new Location Warstein , Germany Reference MZ-HTS-ECOSKATE-I30L+S-DP Description We offer you a new transport suspension from the manufacturer HTS / made in Germany consisting of Train drawbar Type:I30L Roll count: 4 / Material PU Height: 110mm Payload: 3t Weight: 14kg And Paralell suspension type: 30S Roll number 4 / Material PU Height: 110mm Connecting rod: 120-880mm Payload: 3t Weight: 14 kg Further technical data on request. Not the chassis you're looking for? We are happy to offer you heavy-duty suspensions in various sizes up to 128t payload. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer is subject to chang ...

DATA ON THE MACHINE Machine type: Machine landing gear / Tank rolls Manufacturer: HTS Model: ECO-Skate I90L-I90S / 18t Payload Year of construction: new Condition: new Location Warstein , Germany Reference MZ-HTS-ECOSKATE-I90L+S-DP Description We offer you a new transport suspension from the manufacturer HTS / made in Germany consisting of Train drawbar Type:I90L Roll count: 12 / Material PU Height: 110mm Payload: 9t Weight: 57kg And Paralell suspension type: 90S Roll number 12 / Material PU Height: 110mm Connecting rod: 460-1145mm Payload: 9t Weight: 36 kg Further technical data on request. Not the chassis you're looking for? We are happy to offer you heavy-duty suspensions in various sizes up to 176t payload. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer i ...

Two drawer cabinets with roller drawers incl. accessories for CNC lathe Traub TNS30 are offered. Accessories e.g. Traub Adjusting Microscope Traub Adjustment Tool VDI30 Soft top jaws approx. 82 set (3 jaws each) approx. 5 driven tools (partially disassembled) approx. 80 tool holders Approx. 72 collets approx. 32 collets Lot of parting chisel Lot of turning chisels Post Milling Cutter Dial gauge Lot of centering drill bits Post of interchangeable tips for moving tips Lot of Inserts Lot of spare parts Traub Without the pictured 3-jaw chuck Cabinet Height 1m, Width 70cm Depth 70cm The photos do not show the complete scope of delivery. More photos on request or by visiting on site. Listing without guarantee! Sale price

As good as new reversible base jaws Insert: Three-jaw chuck with helical toothing, also power chucks. Manufacturer: Three-jaw chuck FORKARDT-F400; RÖHM-Duro-400→ (FOKARDT; ROHM; SCHUNK; KITAGAWA) Name of the base jaws: for example: MFG 400; SFG400 Three-jaw wedge rod chuck ø 400mm: Hand chuck F400; F500L DURO400; DURO 500 Rota-S 400; Rota-S500 THW500 F B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La= hole spacing; J=Za= tooth spacing; S= groove for top jaw or base jaw W = 45 mm H = 55 mm L = 160 mm N = 30mm S = 18mm La= 60mm Thread M16 x 1.5 Weight approx. 9-10 Kg /set

Chip protection booth - With safety switch - Doors on all 3 sides - Width: 200 cm - Depth: 75 cm - Height: 50 cm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Spare parts from a Fraesmaschine Webo Roeperwerk type Gradumat Table size approx. 12501000mm, complete control Fanuc Y.O.M. 1987 such as board control panel, glass mass staebe, servoverstaerker, motors, ball roller spindles, feed motors, uvw. Price on request No more vertical head. Special price

2x Bilz FAEBI 430 + 2x Wedge Shoes - Rubber Air Springs / Machine Feet - 2x wedge shoes + base - 2x Bilz FAEBI 430 rubber air springs + substructure - 9x spacers - By adjusting the air pressure, the deflection behavior can be adjusted - Wear-resistant, low-maintenance air damping, easily adjustable from the outside - No transmission of structure-borne noise Specifications FAEBI 430 Rubber Air Spring: - Load: 2750 - 6500 daN - Max. pressure: 6 bar - Cushion height: approx. 90 mm - Cushion diameter: 480 mm - Support diameter: 315 mm - Dimensions incl. substructure LxWxH: 510 x 510 x 200 mm - Threaded rod: M20 / 180 mm Wedge shoes: - Dimensions incl. substructure LxWxH: 330 x 250 x 200 mm Spacers: - Diameter: 470 mm - Thickness: 2x 4 mm / 2x 2 mm / 2 x 1.5 mm / 3x 1 mm

Roller movement Offer number: 80051 Technical data: - Roller aisle consisting of 2 side-mounted roller conveyors - Roll width 50 / 70 mm - Roll diameter 50 mm - Number of rolls left + right each 60 pcs - Total width of the roll aisle 200 mm - Length 3250 mm - Height approx. 740 mm - Weight approx. 60 Kg

High-precision parallel documents, sanded in pairs, dimension + parallelism in height and width +/- 0.005mm. Dirkt from the manufacturer, made in Austria.

4 STK. LANGE FRÄSDORNE FOR HORIZONTAL FRÄSEN SK 50 FOR 22 mm, 27 mm, 32 mm, 40 mm THE FRÄSDORNE ARE IN A VERY GOOD CONDITION

Tube spice MK 5 125-200 mm NEW

Fixed and walking lunettes for FAT Poles TUR 560 and TUR 630