tos gear cutting and hobbing machines used for sale

Key data: 1600 mm, 460 mm, 16

TABLE DIAM 1350

Gear hobbing machine TOS OF-71 with change gears

Inv. Num. : 8631 Type: OFA 16 A Producer: TOS Created: 1976 Parameters: Machine weight: 3550 kg

Inv. Num. : 8799 Type: FO-10 Producer: TOS Created: 1958 Parameters: Maximum gear diameter: 1000 mm Maximum module: 10 Machine dimensions: 3120 x 1870 x 2525 mm Machine weight: 9000 kg

Inv. Num. : 8974 Type: OFA 16 SC Producer: TOS Generated: Parameters: Machine weight: 5 t

MAX DIAM 500, MAX MODUL 8 , MAX STROCE 125 , SINUMERIC 840 D

max. wheel diameter: 500 mm gear width: 125 mm max. module: 8 ram stroke range: 135 mm max.helical angle: 41 ° table diameter: 500 mm no. of teeth: 12 - 300 total power requirement: 7,5 kW weight of the machine ca.: 6 t 2021 completely overhauled and equipped with controls and new motors. suitable for internal & external gear shaping with: - Control unit - chip conveyor - coolant - change gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SHIFT PULLEYS ,MAX DIAM 600 ,MAX MODUL 6

The machine is in good technical condition, testing is possible by prior arrangement.

MAX DIAMETER 550 , MAX MODULE 6

Swing over bed 840 mm Swing over support 530 mm Center distance 2000 mm Spindle bore 82 mm Spindle diameter in front bearing 160 mm Spindle taper - metric 100 Morse Tailstock 6 Maximum workpiece weight at the lowest speed of 6000 kg Largest blade profile 40 x 40 mm Electric motor for headstock drive 18.5 kW Machine dimensions L x W 3420 x 1880 mm Machine weight (according to the spike distance) 5700 kg

Tip height: 250 mm Center width: 1500 mm Circumferential Ø: over bed 500 mm Spindle bore: 56 mm Spindle mount: size 8 Pick-up cone tailstock: 6 MK Spindle speeds: 11.2 - 1400 rpm Feeds: longitudinal/flat 0.027-3.8/0.013-1.9 mm/rev Thread pitches: 0.5 - 36 mm Electrical connection: 380 V, 2 x 5.5 kW Space requirement: 3600 x 1250 x 1300/1600 mm Weight: 3000 kg

Key data: 400 mm, 800 mm

For sale TOS lahe SU80/8000 y.m. 1963/2008 Diameter above the bed: 800 mm Circulating diameter above the slide: 495 mm Distance between centers: 8000 mm Machine dimensions (wxd): 1845x11175 mm Machine cca weight: 10000 kg The lathe has a lot steady rest and DRO ESSA

Center distance 11,000 mm Turning diameter 730 mm Drill height 500 mm turnable on the bench 1050 mm Motor power 22 kW

turning diameter over bed: 800 mm turning diameter over slide rest: 860 mm turning length: 6000 mm turning diameter: 800 mm swing diameter over bed slide: 800 mm swing diameter over cross slide guide: 520 mm spindle bore: 71 mm speeds: 11,2 - 1800 U/min volt: 400 V chuck: 315 mm chuck: 630 mm total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TOS Galanta SUIL 40A – Lead and Pull Spindle Lathe For sale is a well-preserved and mechanically overhauled 2009 TOS Galanta SUIL 40A lead and pull spindle lathe, built in 1998. Specifications Manufacturer: TOS Model: Galanta SUIL 40A Machine number: 0219 Year of manufacture: 1998 (mechanically overhauled 2009) Dimensions: approx. 2.2 m × 1.1 m × 1.75 m Weight: 1620 kg Main drive: 5.5 kW Spindle speed (max.): 3150 rpm Spindle bore: 50.2 mm Center spacing: 1000 mm Center height: 200 mm Turning diameter over bed: 400 mm Condition: ready for use (used) Accessories Three-jaw chuck Tailstock Lunette Coolant Setup Interchangeable Wheel Set Operating instructions (German) The machine is fully functional. Viewing possible by appointment


Universal tool milling machine TOS FNGJ 32 3 Axis Heidenhain Digital Display Year of Make: 1999 Travel: X 600 Y 400 Z 400 Speed range: 40 – 2000 rpm With the following accessories: Rigid angle table 800 x 400 mm clamping surface Vertical milling head Extendable drill quill Various tool holders SK 40 Safeguard Chip tray Machine Light Automatic central lubrication pump for X,Y,Z axis Coolant Setup 4 pcs machine shoes

machine has live spindle for drilling and grinding face plate diameter mm 800 max. workpiece diameter mm 1000 max. workpiece height mm 750 max. diameter of external working mm 1000 Z axe mm 630 face plate revolutions 1 5 – 500 rpm main motor output kW 30 (40) machine dimensions length mm 4900 height mm 3830 width mm 4485 machine weight kg 16000 machine had DRO Tesla NS 642

Machine weight: 39,000 kg Faceplate diameter 2000 mm number of supports: 2 pcs. Dimensions : Height 6280 mm width 6600 mm length 4800 mm Extras: Right support with turret head, left and side - sliders. Digital indication of NS 114. Technical condition at the time of sale: Defective rotary amplifier main drive-replacement is required. Require replacement of cables and wires external piping:-machine control cabinets. Repair and adjustment of electrical parts. Not operated since 1994 The maximum dimensions of a workpiece Height 1300 mm Diameter of 2000 mm Weight 15 000 kg

500 mm chuck TOS

Table clamping area: 290 x 1250 mm Table movement x: 800 mm Table movement y: 360 mm Table movement z: 450 mm Milling head pivotable: 90/45 ° Spindle holder: ISA 40 Spindle speeds: 56 - 4500 rpm Pinolene stroke: 125 mm Pinolene feeds: 0.035; 0,14; 0.7 mm/min Spindle drive: 1.8/2.4 kW Space requirement: 2000 x 1900 x 2300 mm Weight: 1700 kg

Peak height: 160 mm Tip width: 1500 mm Grinding wheel dimensions: 500 x 127 x 40 mm Grinding wheel speeds: 1570/2050 rpm electr. Connection: 380 V kW Space requirement: 4400/6400 x 2000 x 1400 mm Weight: approx. 4000 kg

Tech. Data and more info on request

Ø board: 1250 mm Maximum turnerable: 1500 mm Useful height: 1355 mm Vertical crossbar stroke: 800 mm Ram vertical stroke: 1000 mm Toolholder number: 15 Table pruned: 12000 kg CNC Tesla NS 642 C Fast: 8 m/min Power: 40 kW Weight: 27.2 ton

Code 1810 DESCRIPTION CNC Universal milling machine Make TOS Model FNG 63 CNC S/N 16663 Year 1991 Control Heidenhain TNC 355 Table 1120 x 630 mm Longitude ( X – axis ) table 800 mm Vertical ( Y – axis ) table 500 mm Cross ( Z – axis ) spindle 630 mm Spindle movement ( H/V ) 100 mm Spindle taper 40 ISO Speeds 20 - 4000 rpm Feeds X-Y-Z 1 – 7500 mm/min Rapides 7,5 m/min Spindle motor 11 kW – 380 Volts Accessories Table 1120 x 630 mm Coolant Condition Machine is in normal condition

bore capacity in steel (diameter): 50 mm arm length: 1500 mm workpiece height max.: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1610008 Type of machine Radial drill Make MAS Type VO 50 Admision in drilling spindle MT 5 Max. drill capacity 50 mm Base dimensions 1820 x 986 mm Speeds (Rpm) 28 - 2500 Feeds (mm/R) 0,5 - 2 Lenght (mm) 3250 Width (mm) 1120 Height (mm) 3396 Weight 4550 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BN 102 C Producer Tos Swing 280 mm Distance between centres 630 mm Cross table adjustment 250 mm Longitudinal table adjustment 510 mm Vertical milling head adjustment 290 mm Machine weight 1000 kg

Bohrleistung in Stahl (-Ø: 50 mm throat: 1500 mm workpiece height max.: 1380 mm Bohrleistung in Guß (-Ø: 60 mm Abstand Spindelmitte bis Säule: 320 - 1250 mm swival range +/-: 180 ° base plate surface area: 2640 x 1000 mm max. torque on the spindle: 310 Nm Bohrspindel-Ø/ Aufnahme: 75 mm /MK 5 bore spindle stroke: 310 mm spindle turning speed range: 28 - 2500 U/min feed:: 0,05 - 2 mm/U power capacity: 4 kW weight of the machine ca.: 4,3 t cube table 500 x 500 x 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6305 Type: SKJ 20 Produzent: TOS Erzeugt: 1982 Parametern: Tischdurchmesser: 2000 mm Maximales Werkstückgewicht: 15000 kg Max. Werkstückhöhe: 1200 mm Maximale Tischdrehzahl: 170 1/min Gewicht: 35000 kg

Inv. Num. : 6598 Type: SK 12 Producer: ZPS Created: 1964, GO 1994 Parameters: Table diameter: 1180 mm Clamping plate speed: 5.3-225 1/min Max. turning diameter: 1350 mm Max. workpiece height: 900 mm Max. workpiece weight: 5000 kg Length: 2360 mm Width: 3860 mm Height: 4260 mm Weight: 18300 kg

Surface grinder BPH 320A/1000

Key data: 500 mm

804337 Spindle and nut X-axis TOS TRENS SN50 series

Spindle and nut X-axis 1015037

x-travel: 720 mm y-travel: 360 mm z-travel: 420 mm total power requirement: 8 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,56 x 2,56 x 1,82 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 1000 mm grinding length: 2000 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 720 mm y-travel: 360 mm z-travel: 420 mm total power requirement: 8 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. grinding diameter 200 mm Max. sanding length 600 mm Max. workpiece weight 60 kg Device for internal grinding: no Machine dimensions L x W x H 2100x1800x1500 mm Machine weight 2300 kg Center width 600 mm

Center spacing 1 000 mm Max. diameter of the cylinder to be ground 250 mm Minimum step of the X-axis 0.001 mm Minimum step of the Z-axis 0.005 (0.001) mm Circumferential speed of the grinding wheel 25 – 45 m/s Maximum weight of the workpiece between the tips 80 kg Maximum weight of the workpiece including pick-up – on-the-fly clamping 25 kg Grinding wheel diameter 400 mm Cizctcazsk Grinding head spindle drive 4 kW Kavalír CNC control system

x-travel: 1400 mm y-travel: 630 mm z-travel: 600 mm Control: Heidenhain total power requirement: 15 kW weight of the machine ca.: 5,85 t dimensions of the machine ca.: 1800x630 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8204 Type: SK 12 Producer: TOS Created: 1953 Parameters: Max. turning diameter: 1350 mm Clamp plate diameter: 1180 mm Length: 2360 mm Width: 3860 mm Height: 4260 mm Weight: 18300 kg

Control Siemens ... Sinumerik ONE Max. workpiece diameter ... 2200mm Table diameter ... 2000mm Max. table load ... 20000kg Max. workpiece height ... 1710mm Axis Z ... 1000mm Average of the sanding piece ... 180 x 200mm powered tools ... 15 Number of positions in the tool changer... 15 Main engine power ... 58kW L x W x H ... 6700x10400x6400mm Main motor power of driven tools ... 19.5kW Speed of driven tools... 8-3300 rpm Work feed ... 4000mm/min Rapid traverse ... 10000m/min Axis C ... 360° IKZ... 20bar Speed of the clamping plate ... 2-160 rpm Machine weight ... 32000kg Documentation Conveyor C Axis Coverage according to CE marking The machine has undergone a complete overhaul. More info on request. With 1 year warranty.

TOS BUC 63A/3000 Cylindrical Grinding Machine Grinding Diameter 630 mm Grinding Length 3000 mm Height of centers 315 mm Workpiece Weight 2500 Kg Max. Grinding wheel dimensions 750 x 100 x 305 mm Spindle Speed 840/970 rpm Workpiece Spindle Speed 8 - 315 rpm Grinding support stroke 90 / 280 mm Table Speed: Variable - from 0.01 to 3.6 m / min Grinding Head Swivel 90 Degree Table Swivel +/- 5 Degree Work Head Tilts from 90 taper - Morse 6 Spindle Drive 15 KW Machine Dimensions 10000 x 3400 x 2000 mm Machine Weight 13.7 Ton Machine weight approx. 12 t Space requirement approx. 12 x 4.3 x 1.9 m Total power input 22 kW

Producer TOS Tjechië Type FNK25A Table size 250 x 1300 mm Movement X=axis 800 mm Movement Y=axis 350 mm Movement Z=axis 450 mm Spindle taper SK 40 DIN 2080 movement quill 125 mm Spindle speed 56 -4500 Rev/min. Table feedrate X-Y-Z as Yes Voeding Pinole Yes Power 4 kW Dimensions L x W x H 2665 x 1980 x 226 mm Weight 1,760 Kg

Inv. Num. : 8398 Type: OFA 71A Producer: TOS Generated: Parameters: Maximum module: 10 mm Maximum gear diameter: 710 mm Maximum table load: 1000 kg Number of teeth of bevel gear: 8-400 Machine height: 2400 mm Machine length: 3900 mm Machine width: 2600 mm Machine weight: 13500 kg Equipment: Set of interchangeable wheels Conveyor

VTL TOS SKJ 8F, working condition

Inv. Num. : 5411 Type: SK 12 Producer: TOS Created: 1961 Parameters: Table diameter: 1200 mm Max. turning diameter: 1300 mm Maximum workpiece weight: 4 t Max. workpiece height: 1000 mm Weight: 18.3 t

Cylindrical grinder BUB 32/1500

Inv. Num. : 8602 Type: W 9 Producer: TOS Created: 1975 Parameters: Work table length: 950 mm Work table width: 950 mm Maximum weight of the workpiece: 3000 kg Spindle diameter: 90 mm Maximum spindle speed: 1800 1/min X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 900 mm Machine weight: 11000 kg Equipment: DRO

1 gebr. CNC Milling Machine, Fabr. TOS, Type FNG 63 Travel: X 800 mm Y 500 mm Z 630 mm Heidenhain Control

overhauled: 2025 Control Siemens ... Sinumerik ONE Max. workpiece diameter ... 1800mm Table diameter ... 1600mm Max. table load ... 12000kg Max. workpiece height ... 1760mm Axis Z ... 1000mm Plunger Cut... 180x220mm powered tools ... 15 Number of positions in the tool changer ... 15 Axis C ... 360° cooling ... 20bar Main engine power ... 60kW Speed of the clamping table surface ... 2-200 rpm Speed of driven tools ... 8-3300 rpm Motor power of driven tools ... 19.5kW Machine weight ... 27200kg L x W x H ... 5700x7000x5900mm The machine is completely overhauled. More info on request. With one-year warranty.

Slotting machine TOS HOV63

Inv. Num. : 8852 Type: SKJ 8 CNC Producer: TOS Created: GO 2006 Parameters: Control system: MEFI CNC 859 Table diameter: 780 mm Motor power: 40 kW Max. workpiece diameter: 1050 mm Max. workpiece height: 630 mm Max. workpiece weight: 2000 kg Weight: 9000 kg Equipment: Ant electric drives

faceplate diameter: 1250 mm swing diameter: 1400 mm turning height: 1400 mm control: Siemens 840D travel -x axis: -80 / +1100 mm travel -z axis: 1060 mm workpiece height max.: 1400 mm max. workpiece weight: 8000 kg Shank diameter: 200 x 240 mm table turning speeds: 2- 400 U/min drive capacity - spindle motor: 44 kW max. torque on the faceplate: 14510 Nm rapid traverse: 12 m/min turning speed range - milling: 0,01 - 7,4 U/min speeds of tool: 4 - 3000 U/min work piece power: 22 kW Torque: 840 Nm total power requirement: 90 kVA weight of the machine ca.: t dimensions of the machine ca.: m equipped with: - CNC control Siemens 840Dsl - C-axis - driven tools - tool changer 12-fold (driven tools) - complete enclosure - chip conveyor - coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 1050 mm dist. between centers: 6000 mm centre height: 520 mm turning length: 4810 mm workpiece weight max. (main spindle): 6000 kg Maximum workpiece weight with steady rests: 8000 kg max. torque on the spindle: 12500 Nm number of spindle speeds: 2,8-560 1/min Speed range 24 levels: feed per revolution: 0,08-56 mm chuck diameter: 630 mm Maximum travel distance of the longitudinal slide: 4810 mm Maximum travel distance of the cross slide (suppor: 530 mm Maximum travel distance of the tool slide (support: 340 mm Tailstock quill diameter: 150 mm total power requirement: 31 kVA weight of the machine ca.: 10500 kg dimensions of the machine ca.: 7860 x 1970 x 1480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling machine TOS KURIM FRO 6, FRO8

Inv. Num. : 8965 Type: FSQ 80 NC Producer: TOS Created: 1989 Parameters: Control system: HEIDENHAIN NS 700 Work table length: 3000 mm Work table width: 800 mm Maximum vertical spindle speed: 2500 1/min X-axis travel: 3000 mm Y-axis travel: 900 mm Travel Z axis: 1000 mm Machine height: 3500 mm Machine length: 5660 mm Machine width: 4400 mm Machine weight: 18000 kg

Key data: 1250 mm, 1400 mm

Inv. Num. : 8970 Type: BT 1250 C2 Producer: TOS HULIN Created: 2016 Parameters: Switch-on hours: 15429 h Equipment: C-axis Powered tools Max. turning diameter: 1,400 mm Face plate diameter: 1,250 mm Max. workpiece height: 1,400 mm Max. workpiece weight: 8,000 kg Speed range faceplate: 2–400 rpm (2-stage infinitely variable control) Main drive SIEMENS: 44 kW Driven tools: 4–3,000 rpm Power tool drive SIEMENS: 22 kW Max. cutting force: 50,000 N Dimensions and weight: Machine height: 5,555 mm Space requirement incl. protective cover: 7,470 x 5,725 mm Total weight: approx. 34,000 kg Ideal for heavy-duty machining, energy plant construction and large rotationally symmetrical components.

Key data: 1600 mm, 2000 mm, 1500 mm

Inv. Num. : 8971 Type: BT 1600 S2 Producer: TOS HULIN Created: 2018 Parameters: Switch-on hours: 11910 h Max. turning diameter: 2,000 mm Face plate diameter: 1,600 mm Max. workpiece height: 1,500 mm Max. workpiece weight: 12,000 kg Speed range faceplate: 2–315 rpm (2-stage infinitely variable control) Main drive SIEMENS: 58 kW Max. cutting force: 45,000 N Working stroke ram: 1,060 mm Feeds: Working feed: 1–4,000 mm/min Rapid traverse: 12,000 mm/min Feed per revolution: 0.001–50 mm/rev Threading: 0.01–400 mm/rev Dimensions and weight: Machine height: 5,655 mm Space requirement incl. protective cover: 8,685 x 5,325 mm Total weight: approx. 46,000 kg

grinding diameter: 850 mm grinding length: 6000 mm centre height: 425 mm grinding wheel size: 750 x 100 x 305 mm table - swivable: -2 / +2 Grad table load capacity: 3000 kg chucking diameter: 315 mm grinding head swivelling: 90 Grad spindle taper MT: 6 spindle speeds: 12 -300 mm grinding head - power requirement: 22 kW Control: Siemens 840D grinding wheel head adjustable: +30 / -10 ° total power requirement: 41 kW weight of the machine ca.: 22 t dimensions of the machine ca.: 16,0 x 4 x 2,1 m - Siemens Sinumerik 840D CNC control - SBS balance system - INTERNAL GRINDING DEVICE - 4 support steady rests - Tailstock - Coolant system - Electronic hand-held control panel - Ball screws X-Z - Pneumatic quill stroke - Paper belt filter device - Oil mist extraction device - Full protective cover The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 850 mm grinding length: 4000 mm centre height: 425 mm control: Siemens 8 max. workpiece weight between centres: 3000 kg workpiece weight in steadies max.: 4000 kg max. workpiece weight -without tailstock: 300 kg vertical Stroke: 0 - 90 °/deg. work piece spindle speed: 23 - 230 U/min workpiece-spindlehead motor: 5,3 kW grinding spindle head - swivable: +30 / -10 °/deg. dimensions of grinding wheel: 750 x 125 x 305 mm table feed: 0,01 - 4000 mm/min rapid traverse of table: 10 m/min table swivelabel +/-: +3 / -3 °/deg. grinding wheel speed: 25 - 50 m/sec grinding motor: 19 kW dimensions: 14,0 x 3,13 x 2,6 m total power requirement: kW weight of the machine ca.: 19,4 t dimensions of the machine ca.: m Universal external cylindrical grinding machine, modernised in 2011 Siemens 828D control system Internal grinding head, swivelling MPM grinding wheel balancing machine  ...

Inv. Num. : 9019 Type: W 100 A Producer: TOS Generated: Parameters: Work table length: 1250 mm Work table width: 1250 mm X-axis travel: 1600 mm Y-axis travel: 1120 mm Travel travel Z-axis: 1250 mm

Inv. Num. : 9028 Type: SK 12 Producer: TOS Created: 1971 Parameters: Equipment: Accessories

Circumferential diameter over bed ... 840mm Turning length ... 2750mm Max.workpiece weight ... 6000kg Circumferential diameter via support ... 530mm Spindle bore... 82mm Spindle speed ... 7-900 rpm The machine is in good condition, possible to test under power.

Year of manufacture: 1994 / overhauled: 2025 Circumferential diameter over bed ... 630mm Turning length ... 2000mm Circumferential diameter via support ... 340mm Main engine power ... 7.5kW L x W x H ... 4000 x 1400 x 1520mm Machine weight ... 2960kg The machine is in very good condition - after the general overhaul. More info on request. It is possible to visit our warehouse in Brno.

Inv. Num. : 9082 Type: SKJ 8 NC Producer: TOS Created: GO 2020 Parameters: Control system: MEFI CNC 872 Max. workpiece diameter: 800 mm Max. workpiece height: 630 mm Max. workpiece weight: 2000 kg Length: 2000 mm Width: 2550 mm Height: 3700 mm Weight: 10000 kg Equipment: Hydraulic table clamping Electric rotation of the cutter head Ball screws GO 2020: Complete machine overhaul with conversion to a new MEFI CNC 872 control system Conversion from the original hydraulic drives to Yaskawa servo motors New electrical installation New hydraulic system and central lubrication

Coming for sale : TOS Hol Monta UB85/6000 CNC , 2014 Under power less used and very good condition

Inv. Num. : 9157 Type: SK 12 Producer: TOS Created: 1963 Parameters: Table diameter: 1120 mm Maximum workpiece weight: 5000 kg Max. workpiece diameter: 1250 mm Max. workpiece height: 1000 mm

grinding diameter: 630 mm grinding length: 3000 mm centre height: 315 mm grinding wheel size: 750 x 100 x 305 mm grinding wheel width: 150 taper: MK 6 chuck diameter: 315 mm grinding head swivelling: 90 Grad grinding spindle head - swivable: 30 ° table - swivable: 4,30 - 6,30 Grad grinding spindle speed: 815 / 935 U/min spindle speeds: 8 - 57 / 28 - 150 mm grinding sp.stock-cross tvl. frwd/rear/total: 420 mm grinding head quick motion: 80 mm table speed -stepless-: 0,05 - 4,5 m/min workpiece weight: 1200 kg grinding spindle drive: 22 kW Control: Siemens 840D total power requirement: 56 kVA weight of the machine ca.: 13 t dimensions of the machine ca.: 9900×2980×1875 mm The machine is suitable for grinding cylindrical and conical workpieces using longitudinal and plunge grinding methods. The table movement, the feed movement of the grinding headstock, and the tailstock quill return are ...

Control Heidenhain ... TNC 530 Clamping table surface... 3000x1250mm Axis X ... 3000mm Axis Y ... 1000mm Axis Z ... 1400mm Spindle speed... 10-5000 rpm Max. table load... 7000kg Spindle holder ... ISO 50. Number of positions in the tool changer ... 8 Machine weight ... 23000kg Spindle Hunter 30 000rpm Rotary table ISN 1000 CNC V

TOS FNGJ 40 tool milling machine with 3-axis Heidenhain digital display -Travel X/Y/Z 600x400x400mm -Automatic feeds + rapid traverses in all three axes -Spindle speeds of 63-3150 rpm -Tool holder ISO 40 -Hydraulic tool clamp -Angle table 800x400mm -Vertical - Horizontal milling device -Vertical head swivel with quill -Coolant device -Tool trolley + tool holders + milling tool -Counter bearing + horizontal milling spindle -Clamping block for tool holders -Machine feet -Documentation Dimensions: LxWxH 2.5x2x2.3 meters / Weight 2600 kg

x-travel: 7000 mm y-travel: 2800 mm z-travel: 1100 mm spindle turning speed - stepless: max. 4000 U/min spindle drive motor: 30 kW column daylight: 2550 mm table-size: 8000 x 2000 mm tool taper: ISO 50 feed range: 1 - 15000 mm/min c-axis: +/- 105 ° b-axis: 360 ° Control: Siemens 840D total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: 14,8 x 7,9 x 5,4 m Retrofit end of 2026 - CNC control Siemens Sinumerik 840 D - ATC for 40 tools (ISO 50) - 2 axis universal Milling head - Coolant - chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3050 mm, 800 mm, 850 mm

From location: CNC Bed Milling Machine Manufacturer: TOS Kurim Type: FSS 80 Year of Make: 1991 Control: Heidenhain TNC 407 Two-spindle H-V head that rotates automatically programmatically (horizontal/vertical) • Table clamping surface 800x3000 mm • X-axis working stroke (longitudinal) 3050 mm • Transverse stroke 800 mm • Vertical working stroke 850 (790) mm • Spindle taper ISO 50 • Spindle turning range 9 - 2000 rpm -1 • Working position. continuous 1 - 3000 mm / min -1 • Fast feed .. 8000 mm/min -1 • 22 kW spindle motor • Machine dimensions 7660x3470x2740 • Total machine weight 14400 kg

Manufacturer: TOS Model No.: H 80 Condition: Used Stock number: 9338 Worktop length: 1120 mm Worktop width: 900 mm Spindle diameter: 80 mm

Manufacturer: TOS Model: W 100 Condition: Used Stock number: 9339 Worktop length: 1250 mm Worktop width: 1250 mm X-axis moves: 1600 mm Y-axis moves: 1120 mm Z-axis moves: 1250 mm Spindle diameter: 100 mm

Control: Heidenhain 355 x-travel: 850 mm y-travel: 550 mm z-travel: 450 mm tool taper: SK50 hydraulic vise: documentation: weight of the machine ca.: 5,5 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mm y-travel: 800 mm z-travel: 1000 mm Control: Heidenhain type: TNC 155 table surface area: 3000x800 mm turning speeds: 2000 U/min spindle taper ISO: 50 total power requirement: kW weight of the machine ca.: 16 t dimensions of the machine ca.: 7,8x3,85x3,1 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the so ...

grinding diameter: 630 mm grinding length: 3000 mm workpiece weight: 2500 kg grinding wheel diameter: 750 mm voltage: 400 V Control: total power requirement: kW weight of the machine ca.: t Table Swivel 5° - 0° - 5° Internal Grinding Attachment Marposs Steadies Dresser Coolant The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS  ...

Heidenhain iTNC530Indramat10,000 mm1,500 mm2,500 mm0.001 mm20,000 NX 20,000 mm/min, Y 20,000 mm/min, Z 20,000 mm/min (16,000 mm/min at 2,500 mm Z stroke)20 micrometres (X over 2,000 mm; Y; Z)10 micrometres (X over 2,000 mm; Y; Z)CES rotary table 2,000 x 2,500 mm, max. load 20,000 kgISO 50 (CSN 22 0433 / DIN 2079-CC)20 - 4,000 rpm, continuous30 / 37 kW1,000 NmVK 4000 universal, VA2 4000 straight, VP2 4000 angular - all after overhaulChain type (Q) - R 40, 40 toolsDia. 130 mm adjacent / 250 mm with one free position; weight 25 kg; length 340 (unit given as kg in the offer, apparently mm)CTC max 80 s / CTC min 30 s50 kVA3 x 400 V, 50 Hz6 barLpA 80 dB, LWA 99 dBChain type chip conveyors with one chip containerCooling unit for thermal stabilization of the spindle head driveProtective fence with electric locking, protective cover of working area, stable operator platformNew wiring; new bearing ...

x-travel: 850 mm y-travel: 500 mm z-travel: 450 mm table-size: 1250x500 mm spindle taper ISO: 50 spindle turning speed range: 35,5-1800 U/min weight of the machine ca.: 5.2 t HEIDENHAIN TNC-355 Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TOS Hostivar BUB 32/1000 Universal cylindrical Grinder YOM 1986 Original TOS DRO Max. Grinding diameter 320 mm Max. Grinding length 1000 mm Max. weight of workpiece 350 kg Main motor output 16kW Dimensions 5190x1976x1668 mm Machine weight 5500 kg

bore capacity in steel (diameter): 60 mm Center of spindle to wall or column: min./max. 320 - 160 mm spindle turning speed range: 20 - 2.500 U/min quill stroke: 310 mm total power requirement: 4 kW weight of the machine ca.: 4.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: mm grinding length: mm centre height: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TOS BHU25 ist eine Rundschleifmaschine für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazität: Spitzenweite 1000 mm, UmlaufØ 280 mm, Weg 1130×245 mm; Scheibe Ø400×40 mm; Werkstück max 60 kg. Techn.: Scheibe 1570–2050 t/min (2), Spindel 22–710 t/min (12); Schleifspindel 4 kW; Gesamt 8 kVA; Gewicht 2500 kg; 3×380 V 50 Hz. Zubehör: Reitstock mit Feinverstellung, Abrichtvorrichtung, Kühlung, Lampe. Eignet sich für enge Toleranzen; Branchen: Automotive, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

Table 600 x 300 mm Travel distances X / Y / Z: 400 / 300 / 350 mm Spindle holder SK 40 Spindle speeds: 50 - 2500 rpm Drive power 2.2 kW Accessories: Vise, dividing head, rotatable vertical milling head, Weight 1,500 kg Machine dimensions: L 1485 x W 1475 x H 1680 mm Instruction manual in German