sip accessories for machine tools used for sale

The SIP Sirius 7 is a high-precision fixed-bridge Coordinate Measuring Machine (CMM) designed for dimensional inspection and quality control in manufacturing environments. Sirius 7 is known for its robust construction and hydrostatic bearing system, ensuring smooth and accurate measurements. Key Specifications • Measuring Range: 1,000 mm × 1,000 mm × 800 mm (X × Y × Z) • Accuracy: ±4 µm (micrometers) • Repeatability: ±2 µm • Guide System: Hydrostatic bearings • Temperature Compensation: Yes • Control Type: Manual (standard), with options for digital or CNC control systems • Probe System: Typically equipped with Renishaw or similar touch-trigger probes • Software Compatibility: Compatible with various metrology software platforms, including PC-DMIS and others

X axis travel 1000 mm Y axis travel 700 mm Spindle travel 300 mm Table dimension 1.100x842 mm Spindle speed 40-2000 rpm Max power input 10 kW Spindle motor 8 HP Total permissible load on worktable 1 ton Machine approximate weight 15 ton

spindle diameter: 135 mm x-travel: 1000 mm distance between columns: 1000 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 135 mm x-travel: 1000 mm y-travel: 795 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8054 Type: HYDROPTIC 6 Producer: SIP Generated: Parameters: Work table length: 1100 mm Work table width: 842 mm Maximum spindle speed: 2000 1/min Maximum table load (even): 1000 kg X-axis travel: 1000 mm Y-axis travel: 700 mm Z-axis travel: 800 mm Spindle power: 6 kW Machine height: 3205 mm Machine length: 3280 mm Machine width: 2335 mm Machine weight: 10000 kg

spindle diameter: mm x-travel: mm distance between columns: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 135 mm x-travel: 1000 mm y-travel: 700 mm z-travel: 300 mm cross rail adjustment - vertical: 780 mm distance between table/spindle: 1000 mm table surface area: 1100 x 842 mm distance between columns: 1100 mm table load: 1500 kg tool taper: SK 45 spindle turning speed range: 2400 U/min spindle drive: 5,9 kW feed range: 1 - 6000 mm/min weight of the machine ca.: 10,6 t dimensions of the machine ca.: m Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs € 118,436.00) Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm Th ...

spindle diameter: 110 mm x-travel: 900 mm y-travel: 600 mm z-axis: 200 mm table length: 1020 mm table width: 860 mm taper MK: 40 Table size, approx. 1,020 x 860 mm Max. weight of workpiece 800 kg Table travel, longitudinal, max. (X) 900 mm Boring head travel, cross, max. (Y) 600 mm Boring spindle stroke (Z) 200 mm Vertical travel of cross beam (W) 635 mm Vertical distance between table and boring spindle 15 - 850 mm Distance between columns 950 mm Spindle Ø 110 mm Spindle taper internal/external ISO 40 18 spindle speeds 10 - 2,500 rpm Milling feeds of table, infinitely variable 1 - 6,000 mm/min 4 milling feeds of boring head 30 - 180 mm/min 6 boring feeds 0.01 - 0.39 rpm Accuracy of all 3 axes when the machine was new 0.003 mm Quick feeds for table, boring head slide, and boring spindle, max. 6,000 mm/min Spindle drive 6.2 kW Weight, approx. 9,000 kg Total electrical load  ...

spindle diameter: 135 mm x-travel: 1000 mm distance between columns: mm y-travel: 700 mm bore capacity in steel: 60 mm spindle stroke: 300 mm spindle turning speed range: 40-2000 U/min table-size: 1100x842 mm cross rail - adjustment: 770 Vertikalweg mm spindle drive: 6 kW total power requirement: kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: m with: - 2 axes digital display Newall - Rotoptic table - Swivelling rotary table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 135 mm x-travel: 950 mm distance between columns: 1100 mm y-travel: 700 mm cross rail adjustment - vertical: 780 mm quill travel: 300 mm max. distance between table and spindle-nose: 1000 mm table surface area: 1100x842 mm table load: 1500 kg speeds: 40-2000 U/min adjustment speed: 5-1500 mm/min electrics - voltage/frequency: 380/50 V/Hz total power requirement: 8 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 3,3x2,34x2,8 m total power requirement: 8 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 3,3x2,34x2,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Article: profile turning trip dog Manufacturer: Schütte Many different sizes for Schütte profile turning attachment 68AE Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

pickoff with shaft for Schutte multi spindle automatic lathe SF67, used pickoff C26GF pickoff shaft C26GF9S1 gear WG-67S Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: draw bar Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: quadrant lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: feed lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: push rod Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: push lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Assortment of tools / accessories for die-sinking EDM machine Without! Surface-mounted clamping aids and HIRSCHMANN clamping elements!

Article: pickoff with shaft Manufacturer: Schütte pickoff with shaft for Schutte multi spindle automatic lathe SF67 pickoff C26GF pickoff shaft C26GF9S1 gear WG-67S holder B73GF1S1 Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

polygon turning unit for Schutte AG20, used 1 polygon turning unit type Saco SC 15.22.001-Nr.3 1 cardan shaft type Saco SC 15.52.188.00 1 gear box SC 15.22.001-Nr. 3 Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Various parts. Auction-ID: A1-47074-64

Machine clamp. Auction-ID: A1-47074-68

Auction-ID: A1-40976-133

Auction-ID: A1-40976-134

Auction-ID: A1-47279-127

Dimensions: White long: 295x58x40 Black cooling water tank: 260x45x40 Black chip conveyor: 190x57x115 White cooling water tank: 100x100x118

Chip tipping bucket

Chip tipping bucket

Accessories and tools for Mori Seiki SL 15

Accessories and tools for Mori Seiki SL 250

EROWA Pallets ER-024323 There is a new EROWA pallet of type ER-024323 for sale. The pallets are in their original packaging. Auction-ID: A1-46872-15

Accessories and tools for Mori Seiki SL 250 Auction-ID: A7-47048-71

Accessories and tools for Mori Seiki SL 15 Auction-ID: A7-47048-70

Accessories and tools for Mori Seiki SL 15 Auction-ID: A7-47048-69

Chip tipping bucket Auction-ID: A1-47219-54

Chip tipping bucket Auction-ID: A1-47219-55

Dimensions: White long: 295x58x40 Black cooling water tank: 260x45x40 Black chip conveyor: 190x57x115 White cooling water tank: 100x100x118 Auction-ID: A1-47219-15

Chip tipping bucket Auction-ID: A1-47219-53

Chip tipping bucket Auction-ID: A1-47219-52

Pallets with various materials (garden tools, brooms, etc.) Auction-ID: A1-47219-162

Mixed lot of MAPAL WWS tooling system. Includes 1x indexable cutting head and 1x Ø16 MAPAL tool (30320052), along with screws and documentation.

Lot consists of industrial drilling tools, diameters Ø5.5 mm, Ø10.6 mm Auction-ID: A7-46756-229

Mixed lot of MAPAL WWS tooling system. Includes 1x indexable cutting head and 1x Ø16 MAPAL tool (30320052), along with screws and documentation. Auction-ID: A7-46756-209

Set of adjustable hand reamers by Walton Tools (USA, West Hartford, since 1908). Includes two plastic cases with multiple adjustable reamers and blades in various sizes Auction-ID: A7-46756-210

Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...

Transmission belts, drive belt, flat belt, leather belt, belt, transmission belt FROM leather, fabric, rubber, plastic direct from the manufacturer! All dimensions and qualities according to your possible! We customize for you and look forward to your inquiry!

Convolute (excerpt) from different tools - see picture

Pneumotec Workpiece Accumulator PWS 100 Year of construction: 06/2013 Plate diameter 220 mm Number of plates: 20 pieces Height 1200 mm +/-100 mm adjustable Width 780mm Length 3150mm

Including milling heads and holder Auction-ID: A1-43894-55

Precise 0,6kw ESC 3043 +Control Unit 50k 1min. pneum. Tool change D.4mm Total weight 15kg. Only the spindle without cable weighs approx. 3.5kg Pneumatic collet/tool change. Diameter 4.00mm Max. speed 50,000, minimum 10,000 is specified. According to the controls, however, it somehow goes up to 6000 down. Water cooling is necessary during operation, this is all described in the original operating instructions. Water cooling is not included. The requirements are described. There is at least talk of liquid cooling on the technical drawing. Very good used condition, full function. You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice. 24 63 87 F1448 (internal article number)

suitable for Peddinghaus profile steel shears Effective length 2,000 mm

In and with crate

Consisting of various rotary tables, dividing heads and a magnetic clamping plate suitable for DECKEL milling machines Reference: Hüpometall - Lot 26 Weight: approx. 300kg

Universal plan and boring head ISO - 50 recording

3-points Steady Ø 350 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Width: 1200 mm Thickness: 300 mm Total height: 1300 mm Weight: approx 250 kg

Touches 3-points Steady Ø 800 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 800 mm Base dimensions: L 635 x W 300 mm Distance between fixing V: 480 mm Width: 1600 mm Thickness: 350 mm Total height : 1500 mm Weight: approx 250 kg

dimensions of the machine ca.: 380 x 200 x 134 mm weight of the machine ca.: 24 kg power requirement: - kW baseplate-clamping range: 110 x 70 mm workpiece sizes: max. 56 x 70 x 25 mm profile depth: max. 15 mm angular adjustment: 0-2 ° Condition: unused: Electrik 24 Volt: Unused unit in a wooden box. Clamping: permanent-magnetic, to use on a table of a grinding machine for grinding pieces with angle. Detailed describtion see attached PDF. doc. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Consisting of: 2x Electric motor, 3x top link, clamps, 2x cylinder

consisting of 33 pieces HSK 63 tool holders equipped with cutting tools such as milling cutters, drills and boring tools as well as posts of clamping jaws and a matching tool carrier rack Reference: Hercegfi - Lot 59 Weight: approx. 400kg

Peiseler Branch Table Model : 20.0500 Diameter : Ø 500 Pitch : 24 No. 1131

Revolving Center MK - 5 with changeble points

Knoll High Pressure System KF 110/700 Year of Make: 2017 Paper Belt Filter Tank capacity: 600 litres Mas. Pressure: 70bar Little used. Like new

WKZ spindle SK40 Used

Details: Year of construction 2021 The Haimer Power Clamp Economic Plus NG is a high-performance shrink device that is known on the market for its high reliability and precision. Its low power consumption and robust construction make it an ideal choice for any workshop. Technical data: Power consumption: 1.5 kW Shrink range: 3 - 32 mm Dimensions (L x W x H): 600 x 800 x 1200 mm

Including clamping tools, drills, inserts, tools, in 1 cabinet (700x730x1040) Auction-ID: A1-43894-29

Including clamping tools, drills, inserts, tools, in 1 cabinet (700x730x1040) Auction-ID: A1-43894-30

Includes hinged door cabinet with accessories Auction-ID: A7-46939-46

consisting of a vice, jaw width: 160 mm and a three-jaw chuck from the manufacturer RÖHM, diameter: 400 mm Reference: Schmidt - Lot 12 Weight: approx. 150kg Auction-ID: A7-46763-70

Consisting of various rotary tables, dividing heads and a magnetic clamping plate suitable for DECKEL milling machines Reference: Hüpometall - Lot 26 Weight: approx. 300kg Auction-ID: A7-46763-102

consisting of 33 pieces HSK 63 tool holders equipped with cutting tools such as milling cutters, drills and boring tools as well as posts of clamping jaws and a matching tool carrier rack Reference: Hercegfi - Lot 59 Weight: approx. 400kg Auction-ID: A7-46763-228

Peiseler Model : 20.0355 Diameter : Ø 355 mm Pitch : 24 No. 1183 Auction-ID: A1-41999-100

Peiseler Branch Table Model : 20.0500 Diameter : Ø 500 Pitch : 24 No. 1131 Auction-ID: A1-41999-99

Spare parts from a Fraesmaschine Webo Roeperwerk type Gradumat Table size approx. 12501000mm, complete control Fanuc Y.O.M. 1987 such as board control panel, glass mass staebe, servoverstaerker, motors, ball roller spindles, feed motors, uvw. Price on request No more vertical head. Special price

DATA ON THE MACHINE Machine type: Machine landing gear / Tank rolls Manufacturer: HTS Model: ECO-Skate I30L-I30S / 6t payload Built: 2020 Condition: new Location Warstein , Germany Reference MZ-HTS-ECOSKATE-I30L+S-DP Description We offer you a new transport suspension from the manufacturer HTS / made in Germany consisting of Train drawbar Type:I30L Roll count: 4 / Material PU Height: 110mm Payload: 3t Weight: 14kg And Paralell suspension type: 30S Roll number 4 / Material PU Height: 110mm Connecting rod: 120-880mm Payload: 3t Weight: 14 kg Further technical data on request. Not the chassis you're looking for? We are happy to offer you heavy-duty suspensions in various sizes up to 128t payload. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer is subject to chang ...

DATA ON THE MACHINE Machine type: Machine landing gear / Tank rolls Manufacturer: HTS Model: ECO-Skate I90L-I90S / 18t Payload Year of construction: new Condition: new Location Warstein , Germany Reference MZ-HTS-ECOSKATE-I90L+S-DP Description We offer you a new transport suspension from the manufacturer HTS / made in Germany consisting of Train drawbar Type:I90L Roll count: 12 / Material PU Height: 110mm Payload: 9t Weight: 57kg And Paralell suspension type: 90S Roll number 12 / Material PU Height: 110mm Connecting rod: 460-1145mm Payload: 9t Weight: 36 kg Further technical data on request. Not the chassis you're looking for? We are happy to offer you heavy-duty suspensions in various sizes up to 176t payload. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer i ...

Two drawer cabinets with roller drawers incl. accessories for CNC lathe Traub TNS30 are offered. Accessories e.g. Traub Adjusting Microscope Traub Adjustment Tool VDI30 Soft top jaws approx. 82 set (3 jaws each) approx. 5 driven tools (partially disassembled) approx. 80 tool holders Approx. 72 collets approx. 32 collets Lot of parting chisel Lot of turning chisels Post Milling Cutter Dial gauge Lot of centering drill bits Post of interchangeable tips for moving tips Lot of Inserts Lot of spare parts Traub Without the pictured 3-jaw chuck Cabinet Height 1m, Width 70cm Depth 70cm The photos do not show the complete scope of delivery. More photos on request or by visiting on site. Listing without guarantee! Sale price

Tool holders SK30 - Approx. 60 spindle tools - Thread compensation holder - Approx. 40 collet holders Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Chip protection booth - With safety switch - Doors on all 3 sides - Width: 200 cm - Depth: 75 cm - Height: 50 cm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Flanges and Divereses

High-precision parallel documents, sanded in pairs, dimension + parallelism in height and width +/- 0.005mm. Dirkt from the manufacturer, made in Austria.

Roller movement Offer number: 80051 Technical data: - Roller aisle consisting of 2 side-mounted roller conveyors - Roll width 50 / 70 mm - Roll diameter 50 mm - Number of rolls left + right each 60 pcs - Total width of the roll aisle 200 mm - Length 3250 mm - Height approx. 740 mm - Weight approx. 60 Kg