schleif tec accessories for machine tools used for sale

High-precision parallel documents, sanded in pairs, dimension + parallelism in height and width +/- 0.005mm. Dirkt from the manufacturer, made in Austria.

Multi-clamp , high-precision multi-clamp rail ground +/- 0.01mm, width 50, 72 and 100 mm. Directly from the manufacturer from Austria and inexpensive.

Centric tensioner, very precise & stable design +/- 0.01mm, with or without middle jaw for 2-part voltage.

Fixed tensioner, mechanical vice with fixed jaw, B= 50, 72, 100mm, length 200 + 270mm, high-precision version made of hardened tool steel. Additional possibility for middle jaw for 2-part voltage. 100% manufactured in Austria directly from the manufacturer.

Multi-compartment clamping prism for clamping to process mould pins.

Quick-change driver and universal driver for turning and cylindrical grinding. Different sizes.

SWM + SM + UM drivers for lathes and grinders. Quick-change driver + abrasive driver + universal driver. Different sizes. Best quality and safety at the best price.

Stainless steel multi-clamping prism A143-6-10-fold, size W 57 x L 143 x H 76mm, ground on all sides with steps.

Tool assembly block high quality for ISO 40, OSO 50, HSK 40 + 63 + 80 +100. Tool head can be changed by quick-release fastener. Tool can be swivelled 8x 45°.

Key data: 50 mm

Precision grinding vise with pull-down or spindle. Hardened steel, rust resistant.

An R.A. TEX s.r.l. forming machine for the production of staples is available. Strip thickness range: 0.8mm-2mm, strip width range: 80mm-130mm, cutting capacity range: 26mm-140mm, production rate: 250/min, leg length range: 15mm-63mm. The machine can produce the following staple types: Duplex 76, Haubold 500, Super Duplex/KG700, SP90, N4450, Blue, Red, Red special size, G5562, G4450, BEA92, GSN18, GS16, GSW16 and SQ. Machine dimensions X/Y: approx. 6800mm/2500mm, weight: approx. 7600kg. Documentation available. An on-site inspection is possible.

Description -Angle 45 -Bandwidth 000mm -height adjustable

Wire electrode, aluminum welding wire, aluminum welding wire, aluminum-magnesium alloy welding rod -Net weight: 7 kg -Number: 2x package available -Price: per package -Weight complete: 7.6 kg/package

Wire electrode, welding wire, copper base MIG solid wire electrode for soldering copper, copper-silicon, copper-zinc alloys -Net weight: 10.9 kg -Number: 1x package available -Price: per package -Weight complete: 11.5 kg/package

Foot switch, safety foot switch, foot pedal, foot controller, foot remote control, pedal actuator -Manufacturer: L-TEC, Pedal actuator foot remote control type FC-4 -Connector plug: 5-pin -Overall dimensions: 300/155/H190 mm -Weight: 4.2 kg

Inv. Num. : 7256 Type: RFM 600/2 Producer: Röders TEC Created: 2000 Parameters: Work table length: 700 mm Work table width: 550 mm X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 300 mm

Key data: 1200 mm, 1000 mm, 500 mm

Röders 3-Axis High-Speed Machining Center High-Dynamics Vertical Machining Center Engineered for optimal accuracy and continuous precision, this 2012 Röders RXU 1200 provides exceptional 3-axis CNC performance for advanced manufacturing and toolmaking. Technical Details ‍ ‍ 1. Machine identification data Name: High-Speed Machining Center Manufacturer: Röders Model: RXU 1200 Machine number: 13761-12 Year of manufacture: 2012 2. Operational parameters Travel (X / Y / Z): 1200 mm / 1000 mm / 500 mm Clearance height: 600 mm Machining feed rate: 0 - 60,000 mm/min Table size: 1300 x 1100 mm Max. workpiece weight: 3000 kg Axis drives: Linear motors in all axes Spindle: GMN HCS170; 40.4 kW; 100 - 30,000 rpm Tool holder: HSK-F63 Tool magazine: 56 positions Max. tool diameter: 35 mm (HSK-F63) Operating hours: approx. 16,951 h Spi ...

Key data: 1000 mm, 810 mm, 500 mm

Röders 3-Axis High-Speed Machining Center High-Dynamics Vertical Machining Center Featuring state-of-the-art drive technology, this 2018 Röders RXU 1001 delivers high dynamic performance and exceptional precision for demanding 3-axis machining applications. Technical Details ‍ ‍ 1. Machine identification data Name: High-Speed Machining Center Manufacturer: Röders Model: RXU 1001 Machine number: 15355-14 Year of manufacture: 2018 2. Operational parameters Travel (X / Y / Z): 1000 mm / 810 mm / 500 mm Clearance height: 700 mm Machining feed rate: 0 - 60,000 mm/min Table size: 996 x 796 mm Max. workpiece weight: 2000 kg Axis drives: Linear motors in all axes Spindle: 40.4 kW; 100 - 30,000 rpm Tool holder: HSK-F63 Tool magazine: 40 positions Max. tool diameter: 30 mm Operating hours: approx. 56,106 h Spindle hours: approx. 27 ...

Key data: 500 mm, 400 mm, 240 mm

Röders 3-Axis High-Speed Machining Center Compact 3-Axis High-Speed Milling Machine This 2006 Röders RXP 500 is a dedicated 3-axis high-speed machining center, highly regarded in the industry for micro-machining and delivering impeccable surface finishes. Technical Details ‍ 1. Machine identification data Name: CNC High-Speed Milling Machine Manufacturer: Röders Model: RXP 500 Machine number: 11714-65 Year of manufacture: 2006 2. Operational parameters Travel (X / Y / Z): 500 / 400 / 240 mm Table size: 550 x 450 mm (T-slots: 14 mm, spacing 63 mm) Max. workpiece weight: 400 kg Axis drives: Linear motors in all axes Feed rate: 0 – 40,000 mm/min Spindle: 14 kW; 42,000 rpm Tool holder: HSK E40 Tool magazine: 21 positions (optional up to 42 positions) Max. tool diameter: 16 mm Connections (Electrical): 400 V 3-phase (390V - 410V) ...

Key data: 1200 mm, 1050 mm, 500 mm

Röders 3-Axis High-Speed Machining Center High-Dynamics Vertical Machining Center This 2013 Röders RXU 1200 is a top-tier 3-axis high-speed machining center engineered for maximum rigidity and flawless surface quality in complex milling operations. Technical Details ‍ ‍ 1. Machine identification data Name: High-Speed Machining Center Manufacturer: Röders Model: RXU 1200 Machine number: 13761-12 Year of manufacture: 2012 2. Operational parameters Travel (X / Y / Z): 1200 mm / 1000 mm / 500 mm Clearance height: 600 mm Machining feed rate: 0 - 60,000 mm/min Table size: 1300 x 1100 mm Max. workpiece weight: 3000 kg Axis drives: Linear motors in all axes Spindle: GMN HCS170; 40.4 kW; 100 - 30,000 rpm Tool holder: HSK-F63 Tool magazine: 56 positions Max. tool diameter: 35 mm (HSK-F63) Operating hours: approx. 16,951 h Spindle ...

Key data: 600 mm, 450 mm, 300 mm

Röders 3-Axis High-Speed Machining Center 3-Axis High-Speed CNC Machining Center A proven performer in industrial milling, this 1999 Röders RFM 600/2 delivers reliable 3-axis high-speed cutting designed for precision tooling and mold making. Technical Details ‍ ‍ 1. Machine identification data Name: High-Speed Machining Center Manufacturer: Röders Model: RFM 600/2 Year of manufacture: 1999 Machine number: 88194-80 2. Operational parameters Travel (X / Y / Z): 600 / 450 / 300 mm Table size: 700 x 550 mm Max. table load: 800 kg Spindle speed: 42,000 rpm Spindle motor power: 14 kW Feed rate: 0 – 30,000 mm/min Rapid traverse: 30 m/min Tool changer: 18-position Operating hours: approx. 108,888 h Spindle hours: approx. 18,625 h Control: Röders RMS6 Connections (Electrical): 400 V; 20 kVA 3. Weights Total machine weight: approx. 52 ...

working area L-W-H: 10001150850 mm manual operated rotary table: Ø accessories and equipment:: Absaugung Number of working hours: 600 h voltage: 400 V total power requirement: 0,4 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 222,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area L-W-H: 10001150850 mm manual operated rotary table: Ø accessories and equipment:: Absaugung Number of working hours: 600 h voltage: 400 V total power requirement: 0,4 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 222,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Article: profile turning trip dog Manufacturer: Schütte Many different sizes for Schütte profile turning attachment 68AE Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

pickoff with shaft for Schutte multi spindle automatic lathe SF67, used pickoff C26GF pickoff shaft C26GF9S1 gear WG-67S Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: draw bar Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: quadrant lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: feed lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: push rod Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: push lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: pickoff with shaft Manufacturer: Schütte pickoff with shaft for Schutte multi spindle automatic lathe SF67 pickoff C26GF pickoff shaft C26GF9S1 gear WG-67S holder B73GF1S1 Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

polygon turning unit for Schutte AG20, used 1 polygon turning unit type Saco SC 15.22.001-Nr.3 1 cardan shaft type Saco SC 15.52.188.00 1 gear box SC 15.22.001-Nr. 3 Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Auction-ID: A1-48536-134

Auction-ID: A7-48215-77

Face plate, face plate chuck, face launder chuck Pos. 1 --> Outer Ø: 400 mm --> Inner Ø: 160 mm --> Height: 100mm --> T-slots: 6 pieces Pos. 2 --> Outer Ø: 400 mm --> Inner Ø: 140 mm --> Height: 60mm --> T-slots: 3pcs, Pos. 3 --> Outer Ø: 300 mm --> Inner Ø: 100 mm --> Height: 94mm --> T-slots: 6 pieces Pos. 4 --> Outer Ø: 400 --> Inner Ø: 100 mm --> Height: 60mm --> T-slots: Auction-ID: A1-48483-85

Face plate, face plate chuck, face launder chuck Pos. 1 --> Outer Ø: 200 mm --> Inner Ø: 80 mm --> Height: 50mm --> T-slots: 6 pieces Pos. 2 --> Outer Ø: 250 mm --> Inner Ø: 100 mm --> Height: 100mm --> T-slots: 6 pieces Pos. 3 --> Outer Ø: 300 mm --> Inner Ø: 100 mm --> Height: 50mm --> T-slots: 6 pieces Pos. 4 --> Outer Ø: 300 mm --> Inner Ø: 100 mm --> Height: 100mm --> T-slots: 6 pieces Pos. 5 --> Outer Ø: 300 mm --> Inner Ø: 100 mm --> Height: 100mm --> T-slots: 6 pieces Auction-ID: A1-48483-84

Centering tip with bead nut Auction-ID: A1-48483-101

Auction-ID: A1-48580-65

Auction-ID: A1-48580-68

Auction-ID: A1-48580-70

Auction-ID: A1-48580-66

Reducers, tightening screws, jaws and clamping screws in various designs, incl. SSI SCHAEFER transport box Auction-ID: A1-48855-33

Technical data Manufacturer cabinet: SSI Schaefer Execution: Workshop Drawer Cabinet Additional unit: ASTOR 66 Counter Condition: used Configuration Extensive content of tools and workshop accessories available: Taps and dies Reamers Twist drills and various drilling tools Measuring tools and angles Various hand tools Pneumatic Fittings and Pneumatic Components Pneumatic valves and pneumatic hoses Various small parts and spare parts ASTOR 66 Sorting/Counting Device Included Note Documents, folders and documents are not included in the scope of delivery. Liquids, spray cans, aerosols, solder pastes, chemicals and other hazardous substances are not included in the scope of delivery. Sales are made exclusively with the tools, pneumatic parts and small parts recognizable in the pictures. All information without guarantee. Auction-ID: A1-48536-32

Technical data Description: Workbench with fixtures and accessories Execution: Steel Workbench with Wooden Worktop Dimensions (approx.): 250 x 60 x 150 cm Condition: used Configuration Workbench with drawer and base cabinet Support/work table included in the scope of delivery Hand lever bending/straightening device available Large manual press/straightener with spindle drive available Eccentric / hand press available Tesa Edge Closer Box Sealer 6052 available Various fixture, clamping and moulded parts included Various tools and accessories included in display boxes Several forming and embossing tools available in the base cabinet Note The sale includes a green workbench and the support on it as well as the fixtures, tools and accessories on the workbench that can be seen in the pictures. Technical data of the devices are not known. All informati ...

Auction-ID: A1-48722-127

Ingot / Bar Casting Moulds and Foundry Equipment General data: Equipment type: Casting moulds and handling tools for aluminium Application: Aluminium ingot / bar casting Main components: Long rectangular refractory-lined moulds (for aluminium bars/ingots) Multi-cavity cast iron moulds Smaller block-type moulds (stacked, for small ingots or test pieces) Handling tools: Manual ladles for pouring molten metal Tongs, rods, and skimming tools Additional equipment: Steel working table / rack Custom frame for holding moulds during pouring Description: Complete set of casting moulds and auxiliary equipment used in aluminium foundry operations. The system includes various mould types for producing ingots and bars, along with manual handling tools and support structures for efficient and safe casting processes. Auction-ID: A7-48441-19

WITHOUT cabinet Auction-ID: A7-48588-8

Tool holders, clamp holders, reducers, extensions and boring rods in various designs (26x), incl. SSI SCHAEFER transport box Auction-ID: A1-48855-1

Clamp holders, reducers, extensions and boring rods in various designs (27x), incl. SSI SCHAEFER transport box Auction-ID: A1-48855-2

Clamp holders, parter holders and tool holders in various designs (14x), incl. ALUTEC transport box Auction-ID: A1-48855-8

Clamp holders, parter holders and tool holders in various designs (15x), incl. ALUTEC transport box Auction-ID: A1-48855-7

Technical data Machine Type: Tool cabinet with threaded tools, files and hand tools Execution: Tool cabinet Configuration Equipped with: - Machine taps - Hand taps - Left-hand taps - PG, pipe and trapezoidal taps - Needle files and abrasive files - Oil stones / whetstones - Stop angles and measuring tools - Hand saws, spatulas and knives - Screw clamps and parallel screw clamps - Threaded reamers, extensions and tool holders Remarks Extensive tool inventory in wooden tool cabinet. Delivery according to photos. Content unchecked. Auction-ID: A1-48536-67

Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...

Transmission belts, drive belt, flat belt, leather belt, belt, transmission belt FROM leather, fabric, rubber, plastic direct from the manufacturer! All dimensions and qualities according to your possible! We customize for you and look forward to your inquiry!

Convolute (excerpt) from different tools - see picture

Pneumotec Workpiece Accumulator PWS 100 Year of construction: 06/2013 Plate diameter 220 mm Number of plates: 20 pieces Height 1200 mm +/-100 mm adjustable Width 780mm Length 3150mm

Precise 0,6kw ESC 3043 +Control Unit 50k 1min. pneum. Tool change D.4mm Total weight 15kg. Only the spindle without cable weighs approx. 3.5kg Pneumatic collet/tool change. Diameter 4.00mm Max. speed 50,000, minimum 10,000 is specified. According to the controls, however, it somehow goes up to 6000 down. Water cooling is necessary during operation, this is all described in the original operating instructions. Water cooling is not included. The requirements are described. There is at least talk of liquid cooling on the technical drawing. Very good used condition, full function. You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice. 24 63 87 F1448 (internal article number)

suitable for Peddinghaus profile steel shears Effective length 2,000 mm

Universal plan and boring head ISO - 50 recording

3-points Steady Ø 350 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Width: 1200 mm Thickness: 300 mm Total height: 1300 mm Weight: approx 250 kg

Touches 3-points Steady Ø 800 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 800 mm Base dimensions: L 635 x W 300 mm Distance between fixing V: 480 mm Width: 1600 mm Thickness: 350 mm Total height : 1500 mm Weight: approx 250 kg

Revolving Center MK - 5 with changeble points

0: 15.000 kg height: 790 - 1350 mm width: 1200 mm weight: 65.0 kg Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - with height adjustment - CE marking techn. Details: - Height: 790 mm - Width: 1200 mm - Load capacity: 15 to - Height adjustment: 790 - 1350 mm - Support surface: 120 x 120mm - Space requirement approx .: 1350 x 720 x 1350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 5.000 kg height: 800 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 60 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 5.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 2.000 kg height: 800 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 50 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 2.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 20 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 4 x 180 kg Mixing ratio: . 0 fertility: . 0 4x 180 KG The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 4 x 204 l Mixing ratio: . 0 fertility: . 0 4x 180 KG The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Radius grinding device for DECKEL S11 grinding machine – ISOG ref: 2601X00

max. load: . kg 0: . 0 weight: . kg The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us Morehe tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forwar ...

These include: rotating centers, drill heads and T-wrenches on and with steel mobile cabinet Auction-ID: A1-48414-30

Auction-ID: A1-48536-145

Article: Assortment cabinet / drawer cabinet with mixed workshop and machine accessories Configuration Contents: large mixed lot with reamers, twist drills, end mills, turning pins, steel wool, cylinder and standard parts as well as various tool and machine accessories in numerous drawer compartments. Design: multi-part cabinet/shelving system with drawers and storage compartments. Note: Sold as mixed stock according to photos, scope and completeness not verified. Auction-ID: A1-48536-43

type: -- mm tool adaptor: - weight: - kg centre height: -- mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

type: -- mm tool adaptor: - weight: - kg centre height: -- mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DATA ON THE MACHINE Machine type: Machine landing gear / Tank rolls Manufacturer: HTS Model: ECO-Skate I30L-I30S / 6t payload Built: 2020 Condition: new Location Warstein , Germany Reference MZ-HTS-ECOSKATE-I30L+S-DP Description We offer you a new transport suspension from the manufacturer HTS / made in Germany consisting of Train drawbar Type:I30L Roll count: 4 / Material PU Height: 110mm Payload: 3t Weight: 14kg And Paralell suspension type: 30S Roll number 4 / Material PU Height: 110mm Connecting rod: 120-880mm Payload: 3t Weight: 14 kg Further technical data on request. Not the chassis you're looking for? We are happy to offer you heavy-duty suspensions in various sizes up to 128t payload. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer is subject to chang ...

DATA ON THE MACHINE Machine type: Machine landing gear / Tank rolls Manufacturer: HTS Model: ECO-Skate I90L-I90S / 18t Payload Year of construction: new Condition: new Location Warstein , Germany Reference MZ-HTS-ECOSKATE-I90L+S-DP Description We offer you a new transport suspension from the manufacturer HTS / made in Germany consisting of Train drawbar Type:I90L Roll count: 12 / Material PU Height: 110mm Payload: 9t Weight: 57kg And Paralell suspension type: 90S Roll number 12 / Material PU Height: 110mm Connecting rod: 460-1145mm Payload: 9t Weight: 36 kg Further technical data on request. Not the chassis you're looking for? We are happy to offer you heavy-duty suspensions in various sizes up to 176t payload. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer i ...

Two drawer cabinets with roller drawers incl. accessories for CNC lathe Traub TNS30 are offered. Accessories e.g. Traub Adjusting Microscope Traub Adjustment Tool VDI30 Soft top jaws approx. 82 set (3 jaws each) approx. 5 driven tools (partially disassembled) approx. 80 tool holders Approx. 72 collets approx. 32 collets Lot of parting chisel Lot of turning chisels Post Milling Cutter Dial gauge Lot of centering drill bits Post of interchangeable tips for moving tips Lot of Inserts Lot of spare parts Traub Without the pictured 3-jaw chuck Cabinet Height 1m, Width 70cm Depth 70cm The photos do not show the complete scope of delivery. More photos on request or by visiting on site. Listing without guarantee! Sale price

As good as new reversible base jaws Insert: Three-jaw chuck with helical toothing, also power chucks. Manufacturer: Three-jaw chuck FORKARDT-F400; RÖHM-Duro-400→ (FOKARDT; ROHM; SCHUNK; KITAGAWA) Name of the base jaws: for example: MFG 400; SFG400 Three-jaw wedge rod chuck ø 400mm: Hand chuck F400; F500L DURO400; DURO 500 Rota-S 400; Rota-S500 THW500 F B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La= hole spacing; J=Za= tooth spacing; S= groove for top jaw or base jaw W = 45 mm H = 55 mm L = 160 mm N = 30mm S = 18mm La= 60mm Thread M16 x 1.5 Weight approx. 9-10 Kg /set

Chip protection booth - With safety switch - Doors on all 3 sides - Width: 200 cm - Depth: 75 cm - Height: 50 cm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Spare parts from a Fraesmaschine Webo Roeperwerk type Gradumat Table size approx. 12501000mm, complete control Fanuc Y.O.M. 1987 such as board control panel, glass mass staebe, servoverstaerker, motors, ball roller spindles, feed motors, uvw. Price on request No more vertical head. Special price

2x Bilz FAEBI 430 + 2x Wedge Shoes - Rubber Air Springs / Machine Feet - 2x wedge shoes + base - 2x Bilz FAEBI 430 rubber air springs + substructure - 9x spacers - By adjusting the air pressure, the deflection behavior can be adjusted - Wear-resistant, low-maintenance air damping, easily adjustable from the outside - No transmission of structure-borne noise Specifications FAEBI 430 Rubber Air Spring: - Load: 2750 - 6500 daN - Max. pressure: 6 bar - Cushion height: approx. 90 mm - Cushion diameter: 480 mm - Support diameter: 315 mm - Dimensions incl. substructure LxWxH: 510 x 510 x 200 mm - Threaded rod: M20 / 180 mm Wedge shoes: - Dimensions incl. substructure LxWxH: 330 x 250 x 200 mm Spacers: - Diameter: 470 mm - Thickness: 2x 4 mm / 2x 2 mm / 2 x 1.5 mm / 3x 1 mm

Roller movement Offer number: 80051 Technical data: - Roller aisle consisting of 2 side-mounted roller conveyors - Roll width 50 / 70 mm - Roll diameter 50 mm - Number of rolls left + right each 60 pcs - Total width of the roll aisle 200 mm - Length 3250 mm - Height approx. 740 mm - Weight approx. 60 Kg

4 STK. LANGE FRÄSDORNE FOR HORIZONTAL FRÄSEN SK 50 FOR 22 mm, 27 mm, 32 mm, 40 mm THE FRÄSDORNE ARE IN A VERY GOOD CONDITION

Tube spice MK 5 125-200 mm NEW

Fixed and walking lunettes for FAT Poles TUR 560 and TUR 630

Extension cable 3 meters for Sony digital display 2 square, price each EUR 70,-- plus VAT

various wedge shoes, set-up elements, machine feets