negri bossi injection moulding machines used for sale

Hydraulic injection moulding machine manufactured in 2009. This Negri Bossi BM BIRAGHI SINTESI 100 features a clamping force of 1000 kN and an opening stroke of 370 mm. The machine has a platen size of 610 × 550 mm and a maximum mould height of 450 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi BM BIRAGHI SINTESI 100 machine we have for sale. Contact us for further details.

NEGRI BOSSI - SACMI 1300 Ton HIGH TONNAGE 2014 Model BI-POWER VH1300 /12100 120mm Screw Calculated Injection Volume 7351 cm3 Shot Weight 6689 Grams Space between HxV Tie Bars 1400 x 1200 ASK FOR VIDEOS

B&A REF:  9222 TON: 85 SCREW DIAMETER:  35MM SHOT WEIGHT: 155 STROKE VOLUME:  170CM3 INJECTION PRESSURE:  1700AR PLATEN SIZES:  590 X 570MM DBTB: 400 X 360MM MIN MOULD HEIGHT:  150MM MAX MOULD HEIGHT: 450MM MOULD OPENING STROKE:  360MM MAX DAYLIGHT:  810MM EJECTOR STROKE:  125MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 2  MOTOR: 11 HEATING CAPACITY: 7.5KW ROBOT INTERFACE: EUROMAP 12 SCREW DRIVE:   HYDRAULIC

Presse à injecter NEGRI BOSSI 800 T Vector type 8000H-8400 Année : 2018 Nombres d’heures. : 25 000 heures? Commande : TACTUS? Force de verrouillage : 800 T? Diamètre vis : 110 mm? Volume injectable : 5160 cm3 Poids en PS : 4720 gr? Pression d’injection : 2020 bars? Dimensions des plateaux : 1670 x 1580 mm? Distance entre colonnes : 1100 x 950 mm? Epaisseur moule max : 1200 mm? Moteur de dosage électrique? 2 noyaux hydrauliques 4 soufflettes? Interface robot?

B&A REF: 9272 TON: 85 SCREW DIAMETER: 35MM SHOT WEIGHT: 155 STROKE VOLUME: 170CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 590 X 570MM DBTB: 400 X 360MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 450MM MOULD OPENING STROKE: 360MM MAX DAYLIGHT: 810MM EJECTOR STROKE: 125MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 7.5KW SCREW DRIVE: HYDRAULIC

Key data: 1000 kN, 40 mm

Year: 1994 Clamping Force: 100T Screw Diameter: 40mm L/D Ratio: 20 Mold Opening Stroke: 150 x 410 mm Mold Thickness: 150 x 450 mm Platen Dimensions: 590 x 690 mm Distance Between tiebar: 400 x 400 mm Maximum Pressure on Material: 1715 bar Injectable Volume: 302cc Weight: 4170kg Dimensions: 4805 x 1015 x 2065 mm

NEGRI BOSSI CANBIO 210 T type V210-610 Année : 2008 Force de fermeture : 2100 KN - 210 T Diamètre vis : 40 mm Volume injectable: 285 cm3 Capacité d’injection en PS : 260 gr Pression d’injection : 2100 bars Rapport L/D : 22 Débit d'injection maxi : 129 cm3/s 3 zones de chauffe Course d’ouverture moule : 540 mm Epaisseur moule mini / max : 200 - 630 mm Passage entre colonnes : 570 x 510 mm Dimension des plateaux : 870 x 790 mm Puissance moteur de la pompe : 22 kW Puissance totale installée : 35 kW Dimensions : 6,03 x 1,54 x 2,20 m Poids : 8200 Kg

Key data: 8500 , 100

Presse à injecter NEGRI BOSSI 850T Vector type V850-6500 Année : 2007 Nombres d’heures : 44 000 heures Force de verrouillage : 850 T Diamètre vis : 100 mm Volume injectable : 3925 cm3 Pression d’injection : 1670 bars Dimensions des plateaux : 1670 x 1580 mm Distance entre colonnes : 1140 x 1020 mm Course d’ouverture : 1200 mm Epaisseur moule mini : 400 mm Moteur de dosage électrique Interface robot

Presse à injecter NEGRI BOSSI 850T Vector type V850-7000 Année : 2011 Force de verrouillage : 850 T Diamètre vis : 110 mm Pression d’injection : 1670 bars Dimensions des plateaux : 1670 x 1580 mm Distance entre colonnes : 1140 x 1020 mm Course d’ouverture : 1200 mm Epaisseur moule mini : 400 mm Moteur de dosage électrique Interface robot

Key data: 4300 , 70

Presse à injecter NEGRI BOSSI 430T Vector type 4300 H 3200 Année : 2014 Force de verrouillage : 430 T Diamètre vis : 70 mm Volume injectable : 1587 cm3 Pression d’injection : 1587 bars Distance entre colonnes : 760 x 680 mm Epaisseur moule min / max : 250 / 800 mm Course d’ouverture : 730 mm Interface robot

NEGRI BOSSI V 160 - 610 CANBIO ?Année : 2001 Force de fermeture : 160T Volume injectable : 360 cm3? Capacité d’injection : 330 gr de PS? Diamètre de vis : 45 mm? Pression d’injection : 1700 bars ?Épaisseur moule mini/max  : 170 - 550 mm ?Course d’ouverture : 460 mm? Entre colonnes H-V :  510 × 450 mm Dimensions des plateaux : 780 x 730 mm? Commande : DIMI EL 2 Interface colorateur? Noyaux hydrauliques : 1? Noyau air : 1 Dimensions. : 5,72 x 1,47 x 2,15 m Poids : 6150 kg

Key data: 3200 , 1035 , 70

NEGRI BOSSI 320 T type V320-2000CANBIO? Année : 2000 Force de fermeture : 320 T Diamètre vis : 70 mm Rapport L/D : 20 Volume d’injection : 1150 cm3? Capacité d’injection : 1035 gr de PS? Pression d’injection : 1700 bars ?Épaisseur moule mini/max  : 250/700 mm Entre colonnes H-V :  630-570 mm Dimensions des plateaux : 970 x 940 mm? Commande : DIMI EL 2 Interface colorateur Noyaux hydrauliques : 1? Noyau air : 1 Dimensions. : 7,55 x 1,80 x 2,24 m Poids : 12 300 kg

NEGRI BOSSI 55 T type V55-200 CANBIO? Force de fermeture : 55 T Diamètre vis : 28 mm Rapport L/D : 20 Volume d’injection : 92 cm3? Capacité d’injection : 84 gr de PS? Pression d’injection : 2100 bars? Épaisseur moule mini/max : 120/350 mm ?Entre colonnes H-V : 315 x 280 mm Dimensions des plateaux : 455 x 430 mm? Commande : DIMI EL 2 Interface colorateur ?Noyaux hydrauliques : 1? Noyau air : 1 Dimensions. : 3,72 x 1,18 x 1,80 m Poids : 2000 kg

B&A REF: 9340 TON: 130 SCREW DIAMETER: 40MM SHOT WEIGHT: 2015 STROKE VOLUME: 232CM3 INJECTION PRESSURE: 1710AR PLATEN SIZES: 620 X 665MM DBTB: 410 X 460MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 420MM MAX DAYLIGHT: 920MM EJECTOR STROKE: 150MM CONTROLS: COLUMBIA CORE PULLING: 1 AIR VALVES: 1 MOTOR: 15 HEATING CAPACITY: 9KW ROBOT INTERFACE: EUROMAP 67 ROBOT: WITTMANN BRIMUS 16 SCREW DRIVE: HYDRAULIC

B&A REF: 9343 TON: 110 SCREW DIAMETER: 35MM SHOT WEIGHT: 162 STROKE VOLUME: 178CM3 INJECTION PRESSURE: 1955AR PLATEN SIZES: 770 X 730MM DBTB: 480 X 440 MM MIN MOULD HEIGHT: 80MM MAX MOULD HEIGHT: 350MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 850MM EJECTOR STROKE: 125MM CONTROLS: TACTUS CORE PULLING: 2 AIR VALVES: 1 MOTOR: 15 SERVO HEATING CAPACITY: 7.5KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE MOTOR: HYDRAULIC

B&A REF: 9341 TON: 550 SCREW DIAMETER: 90MM SHOT WEIGHT: 2365 STROKE VOLUME: 2600CM3 INJECTION PRESSURE: 1630AR PLATEN SIZES: 1310 X 1260MM DBTB: 900 X 800MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 850MM MOULD OPENING STROKE: 900MM MAX DAYLIGHT: 1750MM EJECTOR STROKE: 300MM CONTROLS: COLUMBIA CORE PULLING: 2 AIR VALVES: 2 MOTOR: 55 HEATING CAPACITY: 34KW ROBOT: STYRAMA SERVO SCREW DRIVE: HYDRAULIC

Key data: 550 kN, 28 mm

NEGRI BOSSI V55-200 - 55T Year: 1998 Working Hours: 51,000 hrs Screw diameter: 28mm Injection capacity per cycle: 84g Opening stroke: 255mm Mold thickness (min x max): 120mm x 350mm Distance between tie bars (H x V): 315mm x 280mm Ejector stroke: 75mm 1 hydraulic core pull 2 air valves

Key data: 1600 kN, 45 mm

NEGRI BOSSI V160/610 - 160T Year: 2001 Working Hours: 72,500 hrs Screw diameter: 45mm Injection capacity per cycle: 360g Opening stroke: 460mm Mold thickness (min x max): 170mm x 550mm Distance between tie bars (H x V): 510mm x 450mm Ejector stroke: 200mm 1 hydraulic core pull 2 air valves

Key data: 3200 kN, 70 mm

NEGRI BOSSI V320/2000 - 320T Year: 2000 Working Hours: 85,000 h Screw diameter: 70mm Injection capacity per cycle: 1035g Opening stroke: 630mm Mold thickness (min x max): 250mm x 700mm Distance between tie bars (H x V): 630mm x 570mm Ejector stroke: 225mm 1 hydraulic core pull 1 air valve

Key data: 14500 , 11700 , 150

NEGRI BOSSI 1450 T injection molding machine Reference : VH 1450 /17000? Year of the machine : 2007 Working hours : 60 000 hours Screw diameter : 150 mm Injection volume : 12 720 cm3 Weight in PS : 11 700 gr Injection pressure : 1420 bars Distance between tie bar : 1300 x 1520 mm Platen dimensions : 2000 x 2220 mm Mold thickness : 600 - 1600 mm Dosing rate. : 215 gr / sec Electrical dosing motor Robot interface Maximum power : 323 KW Screw with treatment Weight: 78 000 kg

Engel injection moulding machine old

Control CC 100 for ENGEL injection moulding machines

Arburg 420C-1300-675 (167) Item number: 167 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 297 g Clamping force: 1,300 kN Screw diameter: 50 mm Spray pressure: 2080 bar Spar spacing: 420 x 420 mm Clamping plate size: 615 x 615 mm Tool installation height min.: 350 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 84840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Funnel: No Core train: Yes Air valve: Yes

Key data: 5500

Screw diameter; H3500 - 85 mm / H2000- 65 mm Injectable volume: H3500 - 946 cm3 / H2000- 511 cm3 Injection pressure: H3500 - 1509 bar / H2000-2228 bar Column width: 930 x 930 mm Minimum mould thickness: 300 mm max: 1000 mm Opening stroke: 1100 mm Cores: 4 Robot Interface: Yes Options: Automatic clamping 24 heated zones

Key data: 2000

Nozzle spacing: 100 mm Screw diameter: H260: 38 H470: 45 mm Injectable volume:H260: 168 H470: 278 cm3 Injection Pressure: H260: 1564 H470: 1659 Column width: 610 x 610 mm Mould thickness: 280-760 mm Opening stroke: 560 mm Cores:: 2 Robot Interface: Yes Possibility of a GROSFILLEY swivel base

Key data: 3200 kN, 359 g/PS, 50 mm

1.0 St. gebr. Two-component injection molding machine Manufacturer: ARBURG Type: 720A3200-800/70 Year of Make: 2017 Clamping force: 320 tons Spar spacing 720 x 720 mm Installation height min./max.: 300 - 800 mm Opening travel: 600 mm Screws DN 1: 50 mm Max. displacement: 392 cm³ Moulded part weight in hp: 359 g Screw DN 2: 22 mm Max. displacement: 34 cm³ Moulded part weight in hp: 31 g Control: Selogica Request technical equipment.

Ref. no.: 18255 Manufacturer: ENGEL Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ Advanta ...

Ref. no.: 18591 Manufacturer: ARBURG Year of construction: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m Further information: The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes. These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential. Typical features of this ...

Ref. no.: 18092 Manufacturer: ENGEL Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil fe ...

Container Size (Max.): 2,5 l

Injection stretch blow moulding machines for PET bottles

Key data: 1500 kN

Clamping force: 150 t. Clamping type: Toggle system. Tie-bar spacing: 470 × 470 mm. Platen size: 700 × 700 mm. Mold height (min–max, approx.): 180–500 mm. Opening stroke: 420 mm. Ejector stroke: 130 mm. Injection volume: 320 cm³. Screw diameter: 42/45 mm (to be confirmed). Heating zones: 4. Machine dimensions: 5000 × 1400 × 2000 mm. Machine weight: 6000–7000 kg.

Key data: 3200 kN, 309 g/PS, 50 mm

Production Line Manufacturing Coffee Capsules NESPRESSO Consisting of the following components: Pos. 01) Injection moulds for capsules, manufacturer: FOSTAG AG 1.0 pcs tool with 16 cavities 1.0 pcs tool with 32 cavities Pos. 02) Two-component injection moulding machine, Bcobrsw Nriue Rvf Nyju Manufacturer: ARBURG, Type: 720A3200-800, Year of manufacture: 2017 The capsules are made as falling parts.

Key data: 1300 kN, 127 g/PS, 35 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ARBURG Type: 420C1300-350-60 Year of Make: 2003 Clamping force: 130 tons Spar spacing 420 x 420 mm Screws DN 1: 35 mm Moulded part weight in hp: 127 g Screw DN 2: 25 mm Moulded part weight in hp: 45 g Control: Selogica Equipment: . Core train -Robots

Ref. no.: 18635 Manufacturer: SEPRO Year of construction: 2022 Further information: The SEPRO S5-25 med is a powerful 3-axis servo linear robot designed for automated part removal and handling applications on injection moulding machines. The robot is in very good technical and cosmetic condition and comes from a clean production environment. The med” version is specifically designed for medical manufacturing and cleanroom applications. The robot was used exclusively for testing and training purposes and therefore has very low operating hours. The robot is additionally fitted with a Zimmer Group pneumatic rotation module and a Gimatic QCY90-A Quick Tool Changer system. The Zimmer module allows components to be rotated between defined positions, while the Gimatic system enables quick changing of grippers or vacuum tooling. These additional features increase the flexibility of the robot f ...

Key data: 800 kN, 30 mm

Stock No.: 503561 Manufacturer: ENGEL Type: VICTORY 200-80 Tech Control: CC100 Year of Make: 2005 Hours: 76988 h Clamping force: 800 kN Plate size h x v: 670 x 600 mm Min. installation height: 250 mm Plate spacing max.: 700 mm Opening travel: 450 mm Screw diameter: 30 mm Displacement: 99 cc Spray pressure: 1450 bar Equipment Screen text German CEE socket 16A Core pull hydraulic 1x Machine including conveyor belt Machine including handling Machine with water battery Machine without material hopper Levelling elements Schuko socket 10A Machine dimensions LxWxH: 4.05m x 1.93m x 2.2m Total Weight: 5200KG Technical Data Handling Machine type : Linear handling Make: Engel Control: ER-HLI 31 VC Year of Make: 2005 Handling weight: 2 kg On-screen text: German Total weight: 250 kg

Key data: 1000 kN, 157 g/PS, 42 mm

1.0 pcs. Two-component injection moulding machine electric Manufacturer: DR. BOY Type: 100E Type: 552 Year of Make: 2017 Clamping force: 100 tons Spar spacing (hxv) 430 x 360 mm Installation height MIN. 250 mm Screws DN 1: 42 mm Moulded part weight 1: 157.6 g/hp Screws DN 2: 24 mm Moulded part weight 2: 39.1 g/hp Control: PROCAN ALPHA Equipment: 1 x Core Pull Highly wear-resistant plasticizing unit Control Pneumatic Needle Gate Nozzle Dryer, manufacturer: FARRAG, year of manufacture: 2016

Presse à injecter BILLION bi matière 750 T Type : H780/6860 - 750 Vis de 45 mm Vis de 90 mm Equipée du dosage électrique et start and stop

Key data: 3500 kN, 1100 g/PS, 70 mm

Year of construction 2010 Clamping force: 350 tons. Screw diameter: 70 + 30 mm Shot volume: 1155 cm³ + 113 cm³ Good condition

Key data: 2400 kN, 916 g/PS, 70 mm

1.0 PCS Gebr. Two Component Injection Molding Machine second aggregate is attached to the side. Manufacturer: NETSTAL Type: SYNERGY1700 - 110 Year of Make: 2004 Clamping force: 240 tons Tiebar spacing: 630 x 630 mm Screw diameter 1: 70 mm Moulded part weight 1: 916 g/hp Screw diameter 2: 28 mm Moulded part weight 2: 59 g/hp Equipment: Core slides 2 x DS / 1 x AS Second unit is mounted on the side

Key data: 2400 kN, 377 g/PS, 50 mm

1.0 PCS Gebr. Two Component Injection Molding Machine the second unit is attached to the side, with Robots Manufacturer: NETSTAL Type: SYNERGY 2400-900 - 230 Year of Make: 2000 Clamping force: 240 tons Tiebar spacing: 630 x 630 mm Screw diameter 1: 50 mm Moulded part weight 1: 377 g/hp Screw diameter 2: 32 mm Moulded part weight 2: 99 g/hp Equipment: Robot, manufacturer SEPRO Core slides 2 x DS / 1 x AS Second unit is mounted on the side Robot SEPRO

Key data: 1750 kN, 337 g/PS, 50 mm

1.0 PCS Gebr. Two Component Injection Molding Machine the second unit is attached to the side Manufacturer: NETSTAL Type: SYNERGY 1750-900-230 Year of Make: 2012 Clamping force: 175 tons Tiebar spacing: 510 x 510 mm Screw diameter 1: 50 mm Moulded part weight 1: 377 g/hp Screw diameter 2: 25 mm Moulded part weight 2: 47 g/hp Equipment: Core slides 2 x DS / 1 x AS Second unit is mounted on the side

Key data: 1750 kN, 377 g/PS, 50 mm

1.0 PCS Gebr. Two Component Injection Molding Machine the second unit is attached to the side Type: SYNERGY 1750-900-230 Year of Make: 2016 Clamping force: 175 tons Tiebar spacing: 510 x 510 mm Screw diameter 1: 50 mm Moulded part weight 1: 377 g/hp Screw diameter 2: 25 mm Moulded part weight 2: 47 g/hp Equipment: Core slides 2 x DS / 1 x AS Second unit is mounted on the side Robot Wittmann, Year of manufacture: 2016

Key data: 1200 kN, 123 g/PS, 35 mm

1.0 PCS Gebr. Two Component Injection Molding Machine the second unit is mounted on the side Manufacturer: NETSTAL Type: SYNERGY 1200-460 - 60 Year of Make: 2006 Clamping force: 120 tons Handlebar spacing: 460 x 460 mm Screw diameter 1: 35 mm Moulded part weight 1: 123 g/hp Screw diameter 2: 20 mm Moulded part weight 2: 31 g/hp Equipment: Core slides 2 x DS / 1 x AS Second unit is mounted on the side

Specifications: - Brand/product line: Supernova - Product type: cleaning granulate / purging compound - Application: Injection Molding Machine Cleaning - Number of packages: 5 boxes - Net weight per package: 20 kg - Total net weight: approx. 100 kg - Shape: granules / granules - Industrial application within plastics processing Application: - For cleaning/purging injection moulding machines - For cleaning cylinder and plastic processing system - Can be used for material and color changes, depending on product specifications - For removing residual plastic/material residues from the processing system Condition / Comments: - Batch consisting of 5 boxes. - Net content: 20 kg per box. - Total net weight: approx. 100 kg. - Exact variant and technical product specifications not determined. - Delivered in the condition and packaging as shown. - See photos for a further impression of the lot and ...

with spare screw, high-pressure hose and various spare parts - see pictures

This Krauss Maffei 200-1000 C2 was manufactured in 2006. A hydraulic injection moulding machine featuring a tie bar distance of 560 x 560 mm and an opening stroke of 700 mm. It includes a screw diameter of 55 mm and is equipped with 1 core valve, 3 air valves, and an EU 12 connector for robot integration. A solid choice for expanding production capabilities. For more information about this hydraulic injection moulding machine, please reach out to us.

Hydraulic injection moulding machine manufactured in 1999. This Krauss Maffei KM800-5700 MC features a clamping force of 8000 kN and an injection unit size of 5700. It has a maximum mould height of 1,100 mm and an opening stroke of 1,400 mm. If you are looking to get high-quality moulding capabilities, consider the Krauss Maffei KM800-5700 MC machine we have for sale. Contact us for further details.

2 pcs. molds with 1-1 cavity, automat with hot runnel control, PP material molds sizes both: 300x245x213 mm machine size min. 25 T

1 cavity from PP material mold sizes: 383x450x384 mm machine size min. 100 T

Hydraulic injection moulding machine manufactured in 2023. This HAITIAN MA900ІІ features a clamping force of 900 kN and a mold opening stroke of 320 mm. It has a screw diameter of 36 mm and a theoretical shot volume of 153 cm³. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN MA900ІІ machine we have for sale. Contact us for further details.

The injection momlding machine corresponds to the hydromechanical two-platen series, clamping force: 550t, operating hours: approx. 80h, with Handling Krauss Maffei KM 250/ LRX-S 250. An on-site inspection is possible, the machine is located in Mexico.

A vertical injection moulding machine from ARBURG is offered. Clamping force: 50t, table size X/Y: 500mm/420mm, max. shot volume: 65cm³, min. opening width: 272mm (172mm), max. opening width: 522mm (422mm), hydraulic/pneumatic cascades: 2/4, hydraulic/pneumatic core pulls: 0/0, hydraulic operating hours: 6979h, automatic operating hours: 4696h, total cycles: 142609. Including shuttle table. Documentation available. Inspection possible by arrangement.

Used injection molding tools for the manufacture of plastic slippers. Offer total 43 pcs. refers to two cavities tooling and accessories. From small children (23) to men (45) in size, it is suitable for the manufacture of slippers of various types and colors. For sale total 12,900 Euro

Clamping force: 300kN, tie-bar spacing: 270x270mm, cylinder diameter: D15, control: Arburg Control+, automatic operating hours: 63.212h, pump operating hours: 63.212h, cycles: 15.328.195. An on-site inspection is possible.

Clamping force: 500kN, tie-bar spacing: 320x320mm, cylinder diameter: D30, control: Arburg SLOGICA, automatic operating hours: 63.147h, pump operating hours: 65.755h, semi-automatic operating hours: 14h, cycles: 13.943.435. An on-site inspection is possible.

Vertical injection moulding machine manufactured in 2016. This Battenfeld CM 40 features a machine weight of 5200 kg and a working height of 1000 mm. The machine is equipped with a robust safety system, ensuring operational safety. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld CM 40 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2013. This Krauss Maffei 35-180 CX features a plasticising size of 180 and a screw diameter of 28 mm. With 2 units available, this machine offers reliable performance for your production needs. If you are looking to get high-quality plastic processing capabilities, consider the Krauss Maffei 35-180 CX machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details.

Condition: used, with visible signs of use, was operational until placed in storage, control voltage: 24V, operating voltage: 230V, frequency: 50Hz, CO₂ pressure: 10bar, connected load: 500W, with CE marking. An on-site inspection is possible.

Hydraulic injection moulding machine manufactured in 2007. This Krauss Maffei 300-1400 CX features a clamping force of 3,000 kN and a tie bar distance of 630 × 630 mm. It includes a hydraulic clamping unit drive and an injection unit size of 300–1400. If you are looking to get high-quality moulding capabilities, consider the Krauss Maffei 300-1400 CX machine we have for sale. Contact us for further details.

Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible.

Clamping force: 1250kN, tie-bar spacing: 475x450mm, injection unit: 440, max. flow rate: 100l/min, max. hydraulic pressure: 190bar, weight: 6.6t, an on-site inspection is possible.

Clamping force: 1600kN, width: 1600mm, height: 2200mm, weight: 6.8t, an on-site inspection is possible.

Clamping force: 650kN, length: 4000mm, width: 1600mm, height: 2200mm, weight: 3.9t, an on-site inspection is possible.

Clamping force: 1500kN, rated current: 133A, connected load: 74kW, an on-site inspection is possible.

Clamping force: 800kN, an on-site inspection is possible.

Electrical injection moulding machine manufactured in 2005. This Husky Hylelectric H1000 RS95/80 features a clamping force of 10,000 kN and a maximum injection pressure of 2280 bar. It has a total platen size of 2070 x 1840 mm and a screw diameter of 80 mm. If you are looking to get high-quality injection moulding capabilities, consider the Husky Hylelectric H1000 RS95/80 machine we have for sale. Contact us for further details.

Electrical injection moulding machine manufactured in 2005. This Husky Hylelectric H1000 RS95/80 features a clamping force of 10,000 kN and a total platen size of 2070 x 1840 mm. It has a maximum injection pressure of 2280 bar and a screw diameter of 80 mm. If you are looking to get high-quality injection moulding capabilities, consider the Husky Hylelectric H1000 RS95/80 machine we have for sale. Contact us for further details.

Electrical injection moulding machine manufactured in 2022. This HAITIAN Mars III MA 600/130B eco features a clamping force of 600 kN and a maximum injection pressure of 1,840 Bar. It has a screw diameter of 28 mm and accommodates molds with a maximum height of 330 mm. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN Mars III MA 600/130B eco machine we have for sale. Contact us for further details.

screw size: 62 mm injection shot weight in Polysterol: 903 g/PS closing pressure: 3300 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping force: 80t, 3-phase mains supply: 400V, 50Hz, total rated current: 130A, upstream fuse: 160A, max. motor current: 30A, an on-site inspection is possible. The machine is located in Hungary.

Hydraulic injection moulding machine manufactured in 2018. This ENGEL duo 5160/700 features a clamping force of 7000 kN and platen dimensions of 1510 x 1440 mm. The machine includes a screw diameter of 80 mm and a shot volume of 2061 cm³. If you are looking to get high-quality injection moulding capabilities, consider the ENGEL duo 5160/700 machine we have for sale. Contact us for further details.

screw size: 98 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 8600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic injection moulding machine manufactured in 2015. This KraussMaffei 1300-12000 MX features a clamping force of 13,000 kN and platen dimensions of 2210 x 1910 mm. The injection unit has a screw diameter of 105 mm and a shot volume of 5195 cm³. If you are looking to get high-quality injection moulding capabilities, consider the KraussMaffei 1300-12000 MX machine we have for sale. Contact us for further details.

Mains voltage: 400V, 3L+N, 230V, 3L, rated current: 7.5A at 400V, 11A at 230V, frequency: 50/60Hz, short-circuit breaking capacity: 3.5kA, weight: 370kg, an on-site inspection is possible.

Hydraulic injection moulding machine manufactured in 2006. This Arburg Allrounder 630S-2500-800/350 features a clamping force of 2,500 kN and a maximum mold height of 900 mm. It includes a screw diameter of 45/35 mm and a maximum injection volume of 195/140 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 630S-2500-800/350 machine we have for sale. Contact us for further details.

screw size: 84 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 440 kN volumn: 1660 volt: V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electrical injection moulding machine manufactured in 2019. This YEAR-CHANCE YC-C 220S features a clamping force of 2,200 kN and a maximum injection volume of 546 cm³. It is equipped with a screw diameter of 55 mm and a maximum injection pressure of 1,797 Bar. If you are looking to get high-quality injection moulding capabilities, consider the YEAR-CHANCE YC-C 220S machine we have for sale. Contact us for further details.

Electrical injection moulding machine manufactured in 2020. This ZHAFIR ZERES ZE900/210B features a clamping force of 900 kN and a maximum injection pressure of 2,000 Bar. It has a screw diameter of 32 mm and accommodates molds with a maximum height of 410 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES ZE900/210B machine we have for sale. Contact us for further details.

Clamping force: 100kN, tie-bar spacing: 470mm, mains connection: 400V/50Hz/64A, control: CDIAS, weight: 5.7t, an on-site inspection is possible.

Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible.

Hydraulic injection moulding machine manufactured in 2002. This Arburg 420 C 1000-150/60 features a clamping force of 1,000 kN and a maximum mold height of 750 mm. It includes a screw diameter of 25/22 mm and a maximum injection volume of 54/30 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 420 C 1000-150/60 machine we have for sale. Contact us for further details.