mayfran accessories for machine tools used for sale

Mayfran Hinged Belt Chip Conveyor with Enlarged Coolant Tank Condition: NEW Overall length: 4.00 m Hinge belt width: 0.50 m Lifting height: 1.10m Total width: 1.20m Coolant tank L: / W: / H: 3.20 x 1.20 x 0.25 m Hand shower Machine pump Pump with piping

liter capacity: 980 l Pressure of pump: 8 / 20 bar control: Schütze / Contactors total power requirement: - kW weight of the machine ca.: 560 kg dimensions of the machine ca.: 2,3 x 2,0 x 1,8 m Coolant System MAYFRAN - BFU 980 /S/20+/8 - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³, 96.6 l/min, pressure 25 bar, max. temperature 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temperature 90°C The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transport length: 4700 mm band width: 450 mm dayligth: 500 mm width: 600 mm 0: 900 mm total power requirement: kW weight of the machine ca.: 2 t dimensions of the machine ca.: 6,7x0,6x1,5 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: 980 l Pressure of pump: 8 / 20 bar control: Schütze / Contactors total power requirement: - kW weight of the machine ca.: 560 kg dimensions of the machine ca.: 2,3 x 2,0 x 1,8 m Coolant System MAYFRAN - BFU 980 /S/20+/8 - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³, 96.6 l/min, pressure 25 bar, max. temperature 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temperature 90°C The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: 980 l Pressure of pump: 8 / 20 bar control: Schütze / Contactors total power requirement: - kW weight of the machine ca.: 560 kg dimensions of the machine ca.: 2,3 x 2,0 x 1,8 m Coolant System MAYFRAM - DPF400-V980 SKD (BFU 980 /S/20+/8) - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 3 - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temp. 90°C 3.0 kW, 3,514 rpm, 20.5 m³/h, 341.66 l/min, pressure 25 bar, max. temp. 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temp. 90°C The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Including rack and transport yoke Auction-ID: A1-48474-204

Article: profile turning trip dog Manufacturer: Schütte Many different sizes for Schütte profile turning attachment 68AE Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

pickoff with shaft for Schutte multi spindle automatic lathe SF67, used pickoff C26GF pickoff shaft C26GF9S1 gear WG-67S Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: draw bar Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: quadrant lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: feed lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: push rod Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: push lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Technical data Mixed lot of cutting tools, tool holders and machine accessories. Configuration Various tool holders and tool holders Multiple milling heads and milling tools Drilling and boring tools Four-jaw chuck ATORN 3D Probe 2 tool mounting/holding fixtures with TUL KELCH SYSTEM labeling Other machine tools and accessories as shown in the illustrations Auction-ID: A7-49302-191

Article: pickoff with shaft Manufacturer: Schütte pickoff with shaft for Schutte multi spindle automatic lathe SF67 pickoff C26GF pickoff shaft C26GF9S1 gear WG-67S holder B73GF1S1 Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

polygon turning unit for Schutte AG20, used 1 polygon turning unit type Saco SC 15.22.001-Nr.3 1 cardan shaft type Saco SC 15.52.188.00 1 gear box SC 15.22.001-Nr. 3 Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Auction-ID: A1-49027-110

Auction-ID: A1-49027-109

Auction-ID: A1-49027-108

Auction-ID: A1-49027-111

Auction-ID: A1-49027-106

Standard Auction-ID: A1-49309-64

Auction-ID: A1-49365-52

Various band saws Auction-ID: A1-49309-194

Auction-ID: A1-49365-49

Carl Mahr Esslingen E18-596 Concentricity test block Auction-ID: A7-48995-24

Auction-ID: A1-49027-103

Sale from candelabra/lamp post factory liquidation. Custom made workshop table. Wooden. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-20

Sale from candelabra/lamp post factory liquidation. Custom made workshop table. Metal frame, wooden top. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-18

Sale from candelabra/lamp post factory liquidation. Custom made workshop table. Metal. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-17

Sale from candelabra/lamp post factory liquidation. Custom made workshop table with drawers. Metal frame, wooden top. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-16

Sale from candelabra/lamp post factory liquidation. Roll stand. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-24

Sale from candelabra/lamp post factory liquidation. Workshop chair. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-30

Sale from candelabra/lamp post factory liquidation. Custom made workshop table. Metal frame, wooden top. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-19

Sale from candelabra/lamp post factory liquidation. Custom made workshop table with vise. Metal frame, wooden top. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-21

Sale from candelabra/lamp post factory liquidation. Workshop shelf. Metal. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-29

Large set of professional tooling including flat and combination wrenches, files, hammers, chisels, mechanical accessories, chucks, tool holders and various metal equipment. Interesting set for mechanical workshop, maintenance, machining, locksmithing, metal construction or tool resale. Visible storage bins are included. Sale in a single lot with all the contents visible in the photographs. Auction-ID: A1-48554-259

2x heavy pulley pullers Auction-ID: A1-49309-124

2x roller stand Auction-ID: A1-49309-70

2 pulley pullers Auction-ID: A1-49309-68

Pallets with various materials (garden tools, brooms, etc.) Auction-ID: A1-49365-162

Various bending jigs Auction-ID: A1-49309-196

Various parts for turret lathe 1 pallet Auction-ID: A1-49309-60

Dimensions: White long: 295x58x40 Black cooling water tank: 260x45x40 Black chip conveyor: 190x57x115 White cooling water tank: 100x100x118 Auction-ID: A1-49365-15

Various punch brackets, stamps Auction-ID: A1-49309-56

Rear gauge digitally adjustable Auction-ID: A1-49309-185

Various wheels and roller track Auction-ID: A1-49309-166

Various hydraulic hoses And pressure gauge Auction-ID: A1-49309-79

Cabinet with various punches and dies For punching machine Auction-ID: A1-49309-76

Tool cabinet incl. accessories and tools for Mori Seiki Auction-ID: A7-49053-60

Cutting length 150 mm, sheet thickness 6 mm, flat steel 70 x 6 mm, round steel 11 mm, weight 13 kg, delivered in original packaging Auction-ID: A1-48552-87

Total 8 pieces of sanding belts, size 90 x 2600 mm, grit 50 Auction-ID: A1-48552-171

Cutting length 125 mm, sheet thickness 6 mm, flat steel 70 x 6 mm, round steel 11 mm, weight 12 kg, delivered in original packaging Auction-ID: A1-48552-132

Blades for Jörg cutting scissors type 4002/E, 3x length 1100 mm, 1x length 1020 mm, 2 pieces unused Auction-ID: A1-48552-23

Transmission belts, drive belt, flat belt, leather belt, belt, transmission belt FROM leather, fabric, rubber, plastic direct from the manufacturer! All dimensions and qualities according to your possible! We customize for you and look forward to your inquiry!

Convolute (excerpt) from different tools - see picture

Pneumotec Workpiece Accumulator PWS 100 Year of construction: 06/2013 Plate diameter 220 mm Number of plates: 20 pieces Height 1200 mm +/-100 mm adjustable Width 780mm Length 3150mm

Precise 0,6kw ESC 3043 +Control Unit 50k 1min. pneum. Tool change D.4mm Total weight 15kg. Only the spindle without cable weighs approx. 3.5kg Pneumatic collet/tool change. Diameter 4.00mm Max. speed 50,000, minimum 10,000 is specified. According to the controls, however, it somehow goes up to 6000 down. Water cooling is necessary during operation, this is all described in the original operating instructions. Water cooling is not included. The requirements are described. There is at least talk of liquid cooling on the technical drawing. Very good used condition, full function. You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice. 24 63 87 F1448 (internal article number)

Auction-ID: A1-49027-102

Auction-ID: A7-49053-207

Universal plan and boring head ISO - 50 recording

3-points Steady Ø 350 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Width: 1200 mm Thickness: 300 mm Total height: 1300 mm Weight: approx 250 kg

Touches 3-points Steady Ø 800 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 800 mm Base dimensions: L 635 x W 300 mm Distance between fixing V: 480 mm Width: 1600 mm Thickness: 350 mm Total height : 1500 mm Weight: approx 250 kg

Auction-ID: A1-48824-106

Revolving Center MK - 5 with changeble points

0: 5.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 2.000 kg height: 800 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 50 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 2.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 20 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 4 x 180 kg Mixing ratio: . 0 fertility: . 0 4x 180 KG The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 4 x 204 l Mixing ratio: . 0 fertility: . 0 4x 180 KG The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Radius grinding device for DECKEL S11 grinding machine – ISOG ref: 2601X00

max. load: . kg 0: . 0 weight: . kg The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us Morehe tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forwar ...

weight: . kg taper MK: .. Different jaw sizes and makes. Price information is not possible without a visit. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Consisting of various milling cutters, reamers and boring tools Auction-ID: A7-49089-12

consisting of various clamping jaws, impact rates Auction-ID: A7-49089-62

consisting of extensions, rings, screws Auction-ID: A7-49089-23

consisting of various reamers, taps, milling cutters Auction-ID: A7-49089-44

consisting of various boring tools, drill chucks, picks and more Auction-ID: A7-49089-25

consisting of various taps and carbide milling cutters, countersinks, cutter heads, indexable inserts from the manufacturer WEDIA Auction-ID: A7-49089-9

consisting of reamers, taps, solid carbide burrs, carbide burrs, disc milling cutters Auction-ID: A7-49089-45

consisting of twist drills, carbide drills and other workshop supplies Auction-ID: A7-49089-46

consisting of various sleeves, twist drills and long drills Auction-ID: A7-49089-35

consisting of various clamping systems from the manufacturer LENZKES and KUKKO Auction-ID: A7-49089-106

Consisting of various sleeves and clamping devices as well as extensions Auction-ID: A7-49089-24

consisting of various measuring stands and clamping devices Auction-ID: A7-49089-130

Consisting of two SK 50 tool holders, face milling cutters, carbide milling cutters, reamers in different designs and sizes Auction-ID: A7-49089-4

consisting of parallel supports, collets, in different sizes Reference: Option - Lot 53 Auction-ID: A7-49056-93

consisting of sleeves, insert holders and dial gauges Auction-ID: A7-49089-129

axially driven tool holder with BMT 65 for e.g. Doosan Manufacturer: RGX- Tools, Quality Made in Europe Fast delivery Brand: RGX-Tools Type: RGX2-65/101-32/2(DO) Condition : new Warranty : 6 months Price only applies to stock goods from production year 2024 - Only 3 pieces available Description: BMT 65 Radial Tool Holder, with Internal Cooling for DOOSAN; Hyundai Wia... Axial version ( straight holder ) Manufacturer: RGX- Tools Item number: RGX2-65/101-32/2(DO) Tool holder: Collet ER 32 Internal cooling : yes ; 20 bar Compatible with the following machines Chevalier ᐳ FBL-300 DOOSAN ᐳ PUMA 2100/2600 M/LM/MS/LMS DOOSAN ᐳ PUMA 2100/2600 Y/LY/SY/LSY DOOSAN ᐳ PUMA 3100 M/LM/LY/XLM/XLY/ULM/ULY DOOSAN ᐳ PUMA MX 2000/2500 DOOSAN ᐳ PUMA MX 2600 T/ST DOOSAN ᐳ PUMA TT 2000/2500 M/S/Y Focus CNC ᐳ FBL 300MC HAAS ᐳ DS-30Y HAAS ᐳ ST-20/25/30/35 Y ...

consisting of deep-hole drills, internally cooled solid drills, inserts in various designs and sizes, as well as indexable insert cutters Auction-ID: A7-49089-27

consisting of HSK mounts with cutter heads, indexable insert cutters, carbide cutter heads, carbide disc cutters, normal milling cutters Auction-ID: A7-49089-15

Spindle cut-off device Schaublin 102 - Type F. Mint condition, never used, with traces of storage.

Quick-release drilling device for milling machine, drilling machine. Drilling barrel diameter 5 mm. DIN 6348 - size 0.

Set of 5 multi-spindle heads from the Swiss brand Pibomulti. Incomplete, lack of clamps and nuts for tightening the bits.

Wooden box of individually wrapped clamps with plastic film. The accuracy class is 0.008 mm. ER20: 12 clamps with diameter 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13