makino milling machines used for sale

x-travel: 1000 mm y-travel: 1000 mm z-travel: 950 mm Control: FANUC Pro-3 feed X/Y/Z/-axis: 1 - 50.000 mm/min rapid traverse X/Y/Z: 50,00 m/min tool taper: HSK-A 100 turning speeds: 20 - 12.000 U/min spindle drive: 25 / 30 kW torque milling spindle: 420 Nm spindle diameter in front bearing: 110 mm B - axis: 360 x 0,001 ° size of pallet: 2x 800 x 800 mm table load capacity: 1.800 kg dimension of workpiece: 1.000 x 950 mm workpiece height max.: 1.000 mm tool piece magazine with: 188 tool length - max.: 475 mm tool diameter: 320 mm weight of tools max.: 20,00 kg total power requirement: 65,00 kW weight of the machine ca.: 30,00 t dimensions of the machine ca.: 8,00 x 5,30 x H3,50 m Horizontal machining center with FANUC Porfessional 3 control, NC rotary table, el. handwheel, chip conveyor, coolant filter KNOLL VRF 450/2300, through-spindle coolant, 188-station tool magazine. New spindle in ...

size of pallet:400x400 mm numbers of pallets:15 table load:400 kg weight of the machine ca.:0,060 t dimensions of the machine ca.:0,4 x 0,4 m 15 pallets for Makino A 55, size 400 x 400 with T-slots for sale

Type: Die-sinking EDM machine Number: 21958 Category: Die-sinking EDM machines / EDM Manafacture: Makino Model: EDAF 3 Year of construction: 2016 Travel: 450 x 350 x 350 mm [ X x Y x Z ] Table size X: 700 mm Table size Y: 500 mm max. workpiece size X: 850 mm max. workpiece size Y: 650 mm max. workpiece size Z: 400 mm max. workpiece weight: 800 kg C-axis Linear scales (X,Y,Z) Control Hyper i Super Spark iV Super Surface Super Edge (incl. MF 4) Super Surface Graphite EROWA Robot Interface (A-Type)

Control: Fanuc Profesional 5 Max.travel range: X 450 mm Y 650 mm Z 460 mm Spindle speed ? 18000 rpm Taper ? HSK 63 Tool changer ? 25 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for parts set up, lase

Control: Fanuc Profesional 3 Max.travel range: X 450 mm Y 650 mm Z 460 mm Spindle speed ? 18000 rpm Taper ? HSK 63 Tool changer ? 25 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for parts set up, lase

Control: Makino Generator: MGW-R Max.travel range: X 600 mm Y 400 mm Z 250 mm U x V axis travel +/- 75 mm Work tank dimensions: 920 x 600 mm Dialectric tank capacity: 900l Made in Japan

Control: Makino Generator: MGW-R Max.travel range: X 600 mm Y 400 mm Z 250 mm U x V axis travel +/- 75 mm Work tank dimensions: 920 x 600 mm Dialectric tank capacity: 900l Made in Japan

Generator: MGH5 max.travel range: X 800mm Y 500mm Z 400mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 32 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Er

Generator: MGF max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Ero

Generator: MGF2 max.travel range : X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode / parts changer: Erowa UPC 5 position, ITS 72 - 90 position, ITS 148 - 15 position cooling device for dial

Generator: MGF2 max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode / parts changer: Erowa UPC 5 position, ITS 72 - 90 position, ITS 148 - 15 position cooling device for diale

Generator: MGF2 max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Er

Generator: MGF2 Max. Travel range: X 450mm, Y350mm, Z 350mm, C yes Clamping of tool: Erowa System ITS Clamping of parts: Erowa Sysem UPC Electrode / parts changer: Erowa UPC 10 position, ITS 72-90 position Cooling device, fire extuiguishing

Generator: MGF max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts: Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Erowa ITS / UPC Er

Generator: MGF2 max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Er

Generator: MGH max.travel range: X 450mm Y 300mm Z 320mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Ero

Generator: MGH max.travel range: X 800mm Y 500mm Z 400mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 32 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Erow

Generator: MGH5 max.travel range: X 450mm Y 300mm Z 320mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Er

Generator: MGH max.travel range: X 450mm Y 300mm Z 320mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Ero

x-travel: 1000 mm y-travel: 1000 mm z-travel: 950 mm Control: FANUC total power requirement: - - - kW weight of the machine ca.: - - - t dimensions of the machine ca.: - - - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 900 mm, 500 mm, 450 mm

Inv. Num. : 7549 Type: F5 Produzent: MAKINO Erzeugt: 2013 Parametern: Steuerungssystem: FANUC Arbeitstischlänge: 1000 mm Arbeitstischbreite: 500 mm Anzahl der Stapelpositionen: 30 Stücke Anzahl der Achsen: 4 Stücke Maximale Vertikalspindeldrehzahl: 20.000 1/min Verfahrwege X-Achse: 900 mm Verfahrwege Y-Achse: 500 mm Verfahrwege Z-Achse: 450 mm Kegel: HSK 63 F Anzahl aller Werkzeuge: 30 Stücke Ausstattung: IKZ Werkzeughalter

Used machine in good condition. Available for immediate delivery. - Number of tool stations: 30 - Control: CNC - Max. workpiece weight: 17.600 kg - Max. tool weight: 66 kg - Axes: 4 - Weight: 77.175 - Dimensions (long x wide x high): 1.501 x 1.300 x 1.000 mm

EDAF-3 precise machining machine, ATC 32EA , XYZ Scale, Erowa chuck, micro machining circuit - Dimensions (long x wide x high): 2.314 x 3020 x 2660 mm - Working area (X x Y x Z): 850 x 650 x 400 mm - Max. electrode weight: 60 kg - Weight: 4.800 kg - Max. workpiece weight: 800 kg - Work table size (width x length): 700 x 500 mm - Control: Control CNC

Inv. Num. : 8267 Type: S56 Producer: Makino Created: 2009 Parameters: Control system: FANUC 310is Work table length: 1000 mm Work table width: 500 mm Maximum table load (uniform): 650 kg Maximum vertical spindle speed: 20000 1/min X-axis travel: 900 mm Y-axis travel: 500 mm Travel Z axis: 450 mm Cone: HSK-A63 Number of all tools: 30 pieces Machine height: 3063 mm Machine length: 3302 mm Machine width: 2570 mm Machine weight: 7500 kg

EDM machine Makino DUO64 vintage 2011.

This 3-axis Makino V55-A15 vertical machining center was manufactured in 1998. It features a CNC FANUC PROFESSIONAL 3 control system, a table size of 1000 x 500 mm, and a spindle speed of up to 15000 rpm. X, Y, Z travels are 900, 500, and 450 mm respectively. Includes a conveyor. If you are looking to get high-quality milling capabilities consider the Makino V55-A15 machine we have for sale. Contact us for more information.

This 3-axis Makino EDNC 30 die-sinking EDM machine was manufactured in 1998. It features travel paths of 300mm in X, 250mm in Y, and 250mm in Z, a table size of 500 × 350 mm, and can handle a maximum workpiece weight of 500 kg. Consider the opportunity to buy this Makino EDNC 30 die-sinking EDM machine. Contact us for more information about this machine.

x-travel: 800 mm y-travel: 750 mm z-travel: 770 mm Control: FANUC Prof 3/A rapid travel x/y/z: 30000 mm/min palets changer: 630 x 630 table weight: 1200 Kg spindle speed:: 14000 U/min spindle taper: HSK A 63 spindle motor: 30/25 kW tool change unit: 40 pos distance spindle center to table: 100-850 mm Internal cooling system: weight of the machine ca.: 17 t dimensions of the machine ca.: 7,9 x 4,2 x 3,3 m Equipped with: - Fanuc Professional 3/A CNC control - Coolant through spindle - Pallet changer - Tool changer (HSK-A63) - Knoll coolant system (renewed) - Chip conveyor - Mütek briquette press (2015) The machine has been used reliably in single-shift operation in recent years, operating hours: Spindle hours: The scope of delivery includes numerous HSK-63 tool holders – both those currently in the machine and a complete Euro pallet with additional tool holders. - Two clamping towers  ...

control: FANUC 16 MA-Pro 3 Number of axles: 4 St. x-travel: 900 mm y-travel: 800 mm z-travel: 970 mm b-axis: 0.001 ° size of pallet: 630 x 630 mm tool piece magazine with: 244 milling spindle: HSK100 spindle turning speed - stepless: -12000 U/min chip conveyor: kW misc. accessories: weight of the machine ca.: 20 t dimensions of the machine ca.: 6.5 x 3 x 3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Basic pallets for MAKINO A77 /81 Dimensions 630 x 630 mm with T-slot spacing 125mm Several available !

Hexagonal tower Dimensions 500 x 500 x 500mm Height 930 mm Base plate 630 x 630mm Grid 40mm Double angle dimensions: 630 x 200 mm, height 760 mm, base plate 630 x 630mm, grid 40mm Square tower Dimensions 400 x 400mm Height 930 mm Base plate 630 x 630mm Grid 40mm

Key data: 500 mm, 1 mm, 500 mm

5-Axis CNC Vertical Machining Center with Pallet Pool Makino D500 Year of construction: 2011 Fanuc 310iS Professional 5 2-axis NC rotary and swivel table Erowa pallet handling system with 4 pallets Table size 400 x 400 mm C-axis 360° A-axis +30° ~ -120° X 500 mm Y 1,000 mm Z 500 mm Spindle speeds 300 – 3,000 rpm. 60-cavity tool magazine Offer number MV-6494

This 3-axis Makino SNC 64-A15 was manufactured in 2001. It features a main spindle speed ranging from 300 to 30,000 rpm and a spindle motor power of 15 kW. The machine is equipped with a tool magazine holding 15 positions and offers a feed rate of up to 16,000 mm/min. If you are looking to get high-quality graphite and metal machining capabilities, consider the Makino SNC 64-A15 vertical machining centre we have for sale. Contact us for further details.

This 5-axis Makino U6 HEAT was manufactured in 2016. It features an impressive X-axis travel of 650 mm, Y-axis travel of 450 mm, and Z-axis travel of 420 mm. The machine has a maximum workpiece size of 1,000 x 800 x 400 mm and can handle a maximum workpiece weight of 1,500 kg. If you are looking to get high-quality wire EDM capabilities, consider the Makino U6 HEAT wire EDM machine we have for sale. Contact us for further details.

Inv. Num. : 9172 Type: EDNC 65 Producer: MAKINO Created: 1998 Parameters: Max. travel length of the X-axis: 650 mm Max. travel length of the Y-axis: 450 mm Max. travel length of the Z-axis: 350 mm Maximum electrode weight: 100 kg

x-travel: 800 mm y-travel: 750 mm z-travel: 770 mm Control: Fanuc type: PRO-3 tool taper: HSK 100 power capacity: 30 kW turning speeds: 10000 U/min rapid traverse: 35 m/min Tool changer: 90 Pos. Cooling through the spindle: 70 bar size of pallet: 630x630 mm Table load: 1200 kg rotary table tiltable: 1 Grad type of pallet-changer: 2 total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: m Special features: Tool magazine for 90 HSK-A100 short-taper tools 70 bar high-pressure coolant system Indexable rotary table swivels in 1° increments Pallet size 630 x 630 mm Maximum table load 1,200 kg Hydraulic power unit for fixture clamping system Fanuc Pro-3 control system Automation: Dual pallet changer Tool breakage detection Automatic workpiece measurement with Marposs touch probe The tech. Data are manufacturer or operator information and therefore non- bindi ...

x-travel: 900 mm y-travel: 800 mm z-travel: 970 mm Control: Fanuc type: PRO-3 tool taper: HSK 100 power capacity: 30 kW turning speeds: 12000 U/min rapid traverse: 50 m/min Tool changer: 90 Pos. Cooling through the spindle: 70 bar size of pallet: 630x630 mm Table load: 1200 kg rotary table tiltable: 1 Grad type of pallet-changer: 2 total power requirement: kW weight of the machine ca.: 20 t dimensions of the machine ca.: m Special features: Tool magazine for 90 HSK-A100 short-taper tools 70 bar high-pressure coolant system Indexable rotary table swivels in 1° increments Pallet size 630 x 630 mm Maximum table load 1,200 kg Hydraulic power unit for fixture clamping system Fanuc Pro-3 control system Automation: Dual pallet changer Tool breakage detection Automatic workpiece measurement with Marposs touch probe The tech. Data are manufacturer or operator information and therefore non- bindi ...

x-travel: 800 mm y-travel: 750 mm z-travel: 770 mm Control: Fanuc type: PRO-3 tool taper: HSK 100 power capacity: 30 kW turning speeds: 10000 U/min rapid traverse: 35 m/min Tool changer: 90 Pos. Cooling through the spindle: 70 bar size of pallet: 630x630 mm Table load: 1200 kg rotary table tiltable: 1 Grad type of pallet-changer: 2 total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: m Special features: Tool magazine for 90 HSK-A100 short-taper tools 70 bar high-pressure coolant system Indexable rotary table swivels in 1° increments Pallet size 630 x 630 mm Maximum table load 1,200 kg Hydraulic power unit for fixture clamping system Fanuc Pro-3 control system Automation: Dual pallet changer Tool breakage detection Automatic workpiece measurement with Marposs touch probe The tech. Data are manufacturer or operator information and therefore non- bindi ...

table length: 750 mm table width: 550 mm ampere: 60 A Control: Makino MGE20 x-travel: 600 mm y-travel: 400 mm z-travel: 250 mm workpiece weight: 450 kg tool change unit: 8 total power requirement: kW weight of the machine ca.: 5,00 t dimensions of the machine ca.: 3,00 x 3,50 x H3,00 m Die-sinking machine with control MAKINO MGE20 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAKINO EDNC 30F ist eine Senkerodiermaschine, ausgelegt für Präzisionsbearbeitung, hohe Genauigkeit und Zuverlässigkeit. Arbeitskapazitäten: Tisch 500 x 350 mm mit 4 T-Nuten (10 mm, Abstand 80 mm), max. Tischbelastung 500 kg; Verfahrwege X 300 mm, Y 250 mm, Z 250 mm; größtes Elektrodengewicht 50 kg; Dielektrikum 60 l (650 x 450 x 300 mm). Technische Hauptdaten: Eilgang 20 m/min; Anschluss 50 Hz 3x 400 V; Maschinengewicht ca. 4100 kg; Abmessungen 2800 x 2200 x 2300 mm. Ermöglicht enge Toleranzen; typische Einsatzbereiche: Automobil, Luft-/Raumfahrt, Medizintechnik, Uhrenindustrie, Werkzeugbau. Technische Daten ohne Gewähr

MAKINO V 33i Graphite ist ein 3-Achsen Bearbeitungszenter, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Tisch 750×450 mm mit 4 T-Nuten 18H8 im Abstand 100 mm, max. Belastung 300 kg; Wege X650 Y450 Z350 mm; Werkstück max L750 B635 H250 mm. Technische Daten: Spindelaufnahme HSK E50 (Abstand Nase–Tisch 150–500 mm), stufenlos 300–30.000 t/min, max. Drehmoment 23,1 Nm; Spindel 17/13 kW; Vorschub 1–20.000 mm/min, Eilgang 20 m/min; Magazin 60 Plätze, Werkzeug-Ø max 80 mm, Länge 250 mm, Wechsel 4,8 s; 3×400 V 50 Hz, Druckluft 4–8 bar; Maschinengewicht ~7700 kg, Abm. 2330×2325×2600 mm, Gesamtleistung 50 kVA. Zubehör: Lampe, Ölnebelabsaugung, Spindelkühlung, Werkstücklader EROWA EASY ROBOT, Zustandsleuchte. Erreicht enge Toleranzen; geeignet für Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gew ...

MAKINO A 77-A 188 ist ein Bearbeitungszenter von hoher Präzision, großer Genauigkeit und hoher Zuverlässigkeit. Arbeitskapazitäten: 2 Tische (630x630 mm), Hub X 800 mm, Y 750 mm, Z 770 mm. Technische Daten: Werkzeugaufnahme HSK-A 100; Spindeldrehzahl 20–10.000 t/min; Spindelmotor 30 kW; Anschluss 50 Hz 3x 400 V; Gewicht ca. 18.000 kg; Abmessungen L6430 x B3650 x H3000 mm; Platzbedarf ~40/24 m2. Zubehör: Satz Werkzeughalter. Ermöglicht enge Toleranzen; Anwendung in Automotive, Luftfahrt, Medizintechnik, Uhrenbau und Maschinenbau Technische Daten ohne Gewähr

MAKINO A 77-A 188 is a Horizontal Bearbeitungszenter für Präzision, hohe Genauigkeit und Zuverlässigkeit. Anzahl Tische 2 (630×630 mm); Verfahrwege X800 Y750 Z770 mm; Werkzeugaufnahme HSK-A100. Spindel 20–10.000 t/min, Spindelmotor 30 kW; Anschluss 50 Hz 3×400 V. Gewicht ~18.000 kg; Abmessungen 6430×3650×3000 mm; Platzbedarf 40/24 m2. Zubehör: Satz Werkzeughalter. Eignet sich für enge Toleranzen; Branchen: Automotive, Luftfahrt, Medizintechnik, Uhrenindustrie, Maschinenbau Technische Daten ohne Gewähr

MAKINO A 88e-A 188 ist ein Horizontal Bearbeitungszenter für hohe Präzision, Genauigkeit und Zuverlässigkeit. Kapazität: 2 Tische 630x630 mm; Wege X 800 mm, Y 750 mm, Z 770 mm; Werkzeugaufnahme HSK-A100. Daten: 20–10000 t/min (stufenlos), Spindelmotor 30 kW, 50 Hz 3x400 V; Gewicht ~18000 kg; Abmessungen L6430 x B3650 x H3000 mm; Platzbedarf ~40/24 m2. Zubehör: Satz Werkzeughalter. Erreicht enge Toleranzen; typische Branchen: Automotive, Luftfahrt, Medizintechnik, Uhrenbau, Werkzeugbau. Technische Daten ohne Gewähr

We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95. The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box. Also some tool pots are damaged. Can be repaired or used as spare parts

x-travel:650 mm y-travel:450 mm z-travel:420 mm control:MAKINO Hyper i U-axis:± 75 mm V-axis:± 75 mm max. size of workpiece LxWxH:1000 x 800 x 400 mm workpiece weight:max. 1500 kg Table dimensions:910 x 710 mm weight of the machine ca.:5 t Dimensions (L/W/H):3 x 3 x 2,3 mm Memory:10 GB Wire EDM in good condition.

table length:920 mm table width:600 mm ampere:13,2 A weight of the machine ca.:6 t dimensions of the machine ca.:2,46 x 2,24 x 2,33 m X-axis:600 mm y-axis:400 mm Z-axis:260 mm max. table load:1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg.

HS9000 High Speed Milling Spindle / Angular Milling Head Type: High speed milling spindle head / angular milling attachment Manufacturer: Nikko / Nikken Model: HS9000 Application: Milling, drilling and machining operations on machining centres or special machines This item is delivered loaded on truck or container. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-49190-29

From a current recycling we offer you 2 used column drilling machines / thread cutting machines from maxion, type BS 36 GL. Year of Make: 2022 Condition: good Hours: Asking price: 5,000 € each Original price: 11.900 € each Equipment / accessories / other information: Tapping capacity: M5-M30 Spindle speeds: 160-260-380-580-880 rpm Spindle MK 4 Thread depth 90mm Drilling depth 160mm Radius 300m Table 550x440mm Overall height 2105mm Asset Manager: M. Vorkötter Phone: 0202-257273152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: 68753 Waghäusel The sale is without warranty Subject to prior sale

From a current recycling we offer you a used column drilling machine / thread cutting machine from Maxion, type BS 50 GL. Year of Make: 2022 Condition: good Hours: Asking price: 9.900 € Original price: € 18,900 Equipment / accessories / other information: Tapping capacity: M5-M45 Spindle speeds infinitely variable 35-530 rpm Spindle MK 4 Thread depth 150mm Drilling depth 200mm Radius 325m Table 650x5000mm Overall height 2150mm Asset Manager: M. Vorkötter Phone: 0202-257273152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: 68753 Waghäusel The sale is without warranty Subject to prior sale

Operating voltage: 400 v Ma.Nr.: 41636 HEIDENHAIN positioning and control TNC 131 / 135 Complete Dokunnetation (operating instructions, technical plans) exists. Errors excepted!

Table clamping surface: 600 x 1100 mm traverse path x: 800 mm traverse path y: 450 mm traverse path z: 500 mm Quill stroke: by hand approximately 50 mm of spindle speeds: 63-3150 rpm stufenl feeds. adjustable: 0,1-1500 mm / min rapid traverse: x/y/z 4.5/2,6/3 m / min. Supply: 380 V, 5.5 kW space: 3000 x 2500 x 2030 mm weight: 4000 kg

Table size: 500 x 1200 mm traverse path x: 1000 mm stroke y: 550 mm traverse path z: 600 mm spindle retainer: ISO 40 spindle speeds: 60-2700 rpm spindle drive: 10 kW Electr. Supply: 380 V, 20 kVA kW space: 3200 x 2800 x 2650 mm weight: 7.3 t

Table clamping surface: 500 x 1000 mm stroke x: 630 mm traverse path y: 500 mm traverse path z: 460 mm Quill stroke: hand 45 mm spindle retainer: ISA 40 spindle speeds: 31.5-3150 rpm stufenl feeds. adjustable: 1-3000 mm / min rapid traverse: x/y 6 / z 4 m/min. Supply: 380 V, 6/8 kW space: 1800 x 2120/2600 x 2020 mm weight: 3100 kg

Table clamping surface: 630 ø mm traverse path x: 600 mm traverse path y: 450 mm traverse path z: 500 mm Quill stroke: hand 80 mm spindle retainer: ISO 40 spindle speeds: 20-3150 rpm stufenl feeds. adjustable: 1-3000 mm / min rapid traverse rate: 4 m / min. Connection: 380V kW space: 2000 + 850 x 2000 x 2000 mm weight: 3300 kg

Stroke x: 600 mm traverse path y: 400 mm traverse path z: 400 mm spindle retainer: ISO 40 spindle speeds: 80-4000 rpm stufenl feeds. adjustable: 0,1-1500 mm / min rapid traverse: x & y/z 4/2.5 m / min. Supply: 380 V, 16 kVA kW space: 2450 x 2200 x 1900 mm weight: 2250 kg

Universal tool milling machine, used universal milling machine, used Type FU 315 - V/2 Fabr. WMW Heckert Built: 1979 Table size/ table: 1250 x 315 mm Laengsmotion/ longit. move: X: 850 mm Horizontal movement/ horiz. Move: Y: 270 mm Vertical movement/ Vert. move : Z 355 mm Tool holder/taper: ISO 50 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 28 - 1400 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t

Universal tool-feeding machine, used universal milling machine, used Type FU 250 x 1000/2 Fabr. WMW Auerbach Built: 1988 Table size/ table: 1130 x 255 mm Laengsmotion/ longit. move: X 690 mm Horizontal movement/ horiz. Move: Y 190 mm Vertical movement/ Vert. move : Z 360 mm Tool holder/taper: ISO 40 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 56 - 2800 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t Specification: Vertical head,shock head

MAHO C Axis Machine Table - Table diameter: 600 mm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Table clamping surface: 500 x 1600 mm table movement x: 1220 mm table movement y: 500 mm table movement z: 500 mm spindle retainer: SK 50 spindle speeds: 56-2800 rpm feeds longitudinal & cross: 10-1800 mm / min feed vertically: 2.5-450 mm / min. Supply: 400 V, 16 kVA kW space: 2000 x 2250 x 2150 mm weight: 4500 kg

Universal milling machine. Hure head. Table size: 2000x480mm. Longitudinal travel: 1700mm. Cross travel: 400mm. Vertical travel: 575mm. ISO50. Motor power: 20cv. Weight: 5500Kgs. Dimensions: 2550x2380x2680.

Universal milling machine with automatic movement ram. Table size: 1600mmx320mm. Longitudinal travel: 1200mm. Cross travel: 300mm. Vertical travel: 600mm. ISO50. Hure head. Equipped with DRO Fagor.

Universal milling machine. Table size: 1400mmx300mm. Longitudinal travel: 1200mm. Cross travel: 320mm. Vertical travel: 500mm. ISO40. Hure head. Speeds: 12. (40-1800rpm). Motor power: 7Kw.

Vertical machining center Cincinnati Millacron Traverse path x 1270 mm Y: travel 660 mm Z: travel 660 mm CNC control: Acramatic 850SX Table size: 1,370 x 660 mm Table load: 910 kg Rapid traverse x/Y/Z: 15,000 mm / min. Spindle speeds: 60-8,000 rpm. Spindle recording: ISO 40 Distance from spindle - table min/max: 150/880 mm Tool changers: 21 items Equipped with:-cooling device -Hand Council operation -Complete instructions Country of origin: England Spindle motor: 9 kW Machine weight: 8.000 kg Machine WxDxH: 3,600 x 2.900 x 3.000 mm

Table size: 460 x 800 mm stroke x: 485 mm traverse path y: 385 mm traverse path z: 380 mm Quill stroke: by hand approximately 70 mm spindle speeds: 50-3150 rpm stufenl feeds. adjustable: 2-1000 mm / min rapid traverse rate: 2 m / min. Port: 3.7/4,4 kW space: 2100 x 1650 x 1730 mm weight: 1850 kg

Technical Specifications - Bridgeport Series I Table Size / Work Surface 9" × 49" (≈ 299 mm × 1245 mm) T-slots 3 pieces, spacing 2.5" (≈ 64 mm), groove width 0.625" (≈ 16 mm) Travel X (Transverse) without Power Feed: 36" (≈ 914 mm) with power feed: 33" (≈ 838 mm) Travel Y (Transverse to Feed) 12" (≈ 306 mm) Quill Stroke (Drilling Spindle Stroke) 5" (≈ 127 mm) Knee Lift (Z-Axis of Table) 16" (≈ 406 mm) Ram Adjustment (Head Stem on Ram Slide) 12" (≈ 306 mm) Min. / Max. distance spindle axis to table nose (spindle/table nose distance) min: 2.5" (≈ 64 mm) Max: 18.25" (≈ 463 mm) Min. / Max. distance spindle to column front (minimum/maximum internal width) min: 6.75" (≈ 171 mm) max: 18.75" (≈ 476 mm) Spindle / Quill Spindle Diameter: 1.875" (≈ 48 mm) Quill Diameter: 3.375" (≈ 86 mm) Spindle holder (standard): R-8 Spindle motor / power 30 minute ...

AVIA FNE 40NC milling machine was built in 2001 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine is used for precision machining of workpieces with a maximum weight of 400 kg. The machining process is performed in three axes by means of a reliable spindle with stepless speed adjustment. The spindle, mounted on a swivel workhead, moves in the Z axis on precision vertical guides. All this is complemented by the easy-to-use HEIDENHAIN NC control system, in which even the most advanced programmes can be created in just a few steps. The AVIA FNE toolroom milling machine weighs 1900 kg. Technical data of the AVIA FNE 40NC metal milling machine - NC controller: HEIDENHAIN TNC 310 - feed in the X/Y/Z axis: 620/420/400 mm - rapid traverse in the X/Y/Z axis: 6000/4000/4000 mm/min - feed rate adjustment: stepless - maximum workpiece weight: 400 kg - horizontal work table  ...

Qty.1 Second-hand milling (scalping) line Mfc.: Torrington Type: 30" Slap Miller Speed: 500 rpm – 18 fpm Capacity: 1,9 m/dk

Universal milling machine. Table size: 1200mmx320mm. Longitudinal travel: 950mm. Cross travel: 300mm. Vertical travel: 500mm. ISO40. Hure head. DRO Fagor.

Table size: 440 x 1200 mm table movement x: 950 mm table movement y: 250 mm table movement z: 475 mm spindle retainer: ISA 40 spindle speeds: 40-1800 rpm feeds longitudinal & cross: 16-630 mm / min feed vertically: 5.6-224 mm / min. Supply: 380 V, 7.5 kVA kW space: 2150 x 2000 x 2100 mm weight: 2400 kg

Drilling capacity in steel: 32 mm Drilling capacity in cast: 40 mm Cutter head milling max.: 80 mm Projection: 220 mm Spindle speed: (12) 75-3200 RPM Spindle retainer: MK 4 Quill stroke: 125 mm Table size: 800 x 240 mm Travel (x / y): 555 / 225 mm Milling head swiveling: - 90 ° to + 90 ° Distance from spindle / table: 60-485 mm Head height: 425 mm T - slot size: 14 mm S1 motor power output 100%: 1,1 / 1,5 kW (400 V) Motor power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H) : 1140 x 770 x 1500 mm Approximate weight: 287 kg without stand Features: Quick and easy change of speed using the gear selector switch Versatile application possibilities such as drilling, milling, thread cutting, … High running smoothness by polished, running in an oil bath gear gears Right - and the link run device for thread cutting Quill adjustment by means of ...

Standard ALB ear performance: 30 mm Thread cutting performance: M 20 (option) Thread: M 12 Spindle: MK 3 or SK 30 (option) Quill stroke: 100 mm Longitudinal / cross travel: 350/160 mm Distance spindle/cross table: 80 to 450 mm Table area: 600 x 240 mm Column diameter: 110 mm Total height: Max 1,920 mm Weight: 340 kg Motor pole shift bar: 0.8/1.5 kW Spindle speeds, continuous, selectable: 10 spindle speeds: 80-1,400 rpm 10 spindle speeds: 120-2,160 rpm 10 spindle speeds: 160-2,800 RPM Facilities: A versatile, accurate and handy drilling milling machine. The quiet-running drive and a perfect clamping of Quill guarantee good surfaces when milling. The headstock can be swung out. The stage is precise and precisely adjustable. Pitch 0.05 mm. clamping device for both axes. Full motor protection. Machine incl. Cabinet.

Vertical Milling Machine RAMBAUDI type RAMMATIC 600 Travel X 1260 mm Travel Y 690 mm Travel Z 600 mm Numerical Command NUM 1060 Cone SA 50 Table size 2000 x 600 mm Year of construction 1991 Voltage 380 V Depth 2500 mm Total height 4000 mm Weight approx 9 T

Vertical Milling Machine Droop & Rein type FS130 Travel X 2000 mm Travel Y 1000 mm Travel Z 1000 mm Spindle SA 50 Sensitive spindle exit: 200 mm Rotation from 31,5 to 1600 RPM Table size 2400 x 1070 mm Year of construction 1976 Throat depth 950 mm Head Tilt head Spindle motor 22 kW Scale HEIDENHAIN 3 axes New electrical panel in 2006 Voltage 380 V Width 3500 mm Depth 4700 mm Total height 4500 mm Weight 26 T

2 piece F. 17.3 2 piece F. 17.34 Milling machines with double head (duplex), with counter holder for horizontal milling

Table size: 254 x 1100 mm Table movement x: machine. u. v. hand 682 mm Table movement y: hand 380 mm Table movement z: hand 457 mm Milling head swiveling to: +/-90 or +/-45 ° Spindle retainer: ISO 40 Spindle speeds: 70-2300 rpm Quill feeds: 0.038 â 0.152 mm / min Spindle drive: 380 V, 2.2 kW Space: 1600 x 1600 x 2150 mm Weight: 1420 kg

x-280 ,y- 200 , Z 315 , Table dimensions 380x380/250x500 A lot of writings,much more than pictured

Table surface: 300 x 1300 mm Table movement x: 950 mm Table movement y: 220 mm Table movement z: 400 mm Spindle intake: MK 5 Spindle speeds: 25-1200 rpm Prests lengthwise & across: 7.5-635 mm/min Presens vertical: 3-250 mm/min Electr. Connection: 380 V, 7.5 kW Space requirement: 1670 x 1500 x 1750 mm Weight: 2600 kg

Technical data: Fixed angular table: Fixed angular table clamping area: 800 x 400 mm Max table load: 200 kg Working spindle: Tool holder horizontally and vertically: ISO 40 Power of the main drive motor / 100% ED: 2.2 kW Vertical milling head: Speed range, tiered: (12) 50 - 2000 rpm Drill pinole, stroke: 100 mm Swivel range: +/- 90° Travel: X-axis automatic/man.: 385/400 mm Y-axis automatic/man.: 185/200 mm Z-axis automatic/man.: 365/380 mm Feeds: Feed range: 0-650 mm/min Number of feeds: infinitely adjustable Rapid response: 1000 mm/min Characteristics: - Machine accuracy according to DIN 8615 - 3-axis digital displays FAGOR® Innova (option) - Spindle run max. 0.005 mm, incl. test protocol according to DIN 8615 (rolling bearing SKF®/NSK®) - Vertical milling head can be swivelled out for horizontal milling (without d ...

Vertical -consol milling machine, used    Vertical -milling machine, used Make/make: WMW HECKERT Type/ model: FQS 400 Year built: 1978 Control type / control: conventional   x-way: 1190 mm   y-way: 530 mm z-way: 540 mm Table size/ table: 1600 x 400 mm Spindle power/ spindle power: 11kW Tool holder/tool taper: ISO 50 Speeds/ speeds: 28 - 1400 rpm Feeds: 16- 800 mm/min Total power requirement: 21 kW Machine weight: 4.8 t  

Blade length 205 mm Max cutting performance Sheet R = 42 kg / mm2 4 mm Sheet R = 70 kg / mm2 3 mm Engine power 3 kW Number of beats / minutes 50 min Table dimension 625 x 954 mm Capacity of the oil tank 25 l Weight 500 kg The setting between the blades is fully automatic. Standard: - 1 set of knives at 30 ° (mounted on the machine) - 1 stop switch - 1 general circuit breaker - 1 stop adjustable and adjustable every 15° - Fill the first oil - Manual with installation and maintenance instructions and service keys.

x-400,y-330,z-350,angle table 630x335,SK 40, 40-6,000 rpm,measuring probe

Table clamping area: 560 x 240 mm x-way: 300 mm y-way: 275 mm z-way: 200 mm Spindle holder: ISO 40 Spindle speeds: 40 - 2000 rpm Operating voltage: 380 V Total power requirement: 1.5 kW Space requirement: 1200 x 1100 x 1700 mm Weight: approx. 750 kg

Table clamping area: 310 x 1400 mm Table movement x: 950 mm Table movement y: approx. 325/345 mm Table movement z: approx. 500 mm Spindle speeds: 20 - 1500 rpm Feeds longitudinally and transversely: 18 - 620 mm/min Feeds vertical: 18 - 620 mm/min electr. Connection: 380 V kW Space requirement: 1900 x 1600 x 1750 mm Weight: approx. 1500 kg

1 x Universall tool-feeding machine Lid FP 4 Built: c.1970 Very robust and rare conventional machine in good condition. Technical data: Travel: X: 700 Y: 400 Z: 450 mm Spindle speeds: 31.5 - 1,600 rpm (18 levels) Tool holder: ISO 40 Pinole stroke: 115 mm Feed in X/Y/Z Feed range: X/Y/Z 5 - 500 mm/min (infinitely adjustable) Rapid response: X/Y: 10 - 500 mm/min Z: 5 -250 mm/min (18 levels) swivel handling table Clamping area: 860 x 500 mm Accessories: 1 x horizontal counter bearing 5 x horizontal frond spine Bftj7cazem 10 x vertical fraes aufnahme 36 x tension tension ingesheis from 0.5 - 18 mm 0.5 mm rising 5 x Direct clamping pliers D: 12/14/16/18/20 mm 1 x machine vice Manual various distance rings and accessories for milling machines complete documentation The machine can be inspected at our warehouse under electricity. A 3-axis digital ...