kolbe meat and fish processing machines used for sale

Ground meat portionning line Mado Category Used meat processing machines Subcategory Lines Type Lines Height 950 Width 1100 mm Length 2700 mm Voltage Electrical: 400V 50Hz 3N Main material Stainlees Steel

Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 300 liters (mixing capacity depending of meat up to 200 kg) Worm, worm housing and closing are completely stainless Delivery time: 10 working days after advanced payment

Kolbe MWE32 Mixed Meat Grinder completely made of stainless steel, screw, screw housing and union nut made of special alloy smooth running Wheeled on wheels Machine should be thoroughly cleaned before use Video about test run available

REF-2488 KOLBE MW32 MEAT MIXER GRINDER WITH 100 mm PLATE Meat mixer-grinder with product feed Manufacturer: KOLBE Model: MW32 Machine no.: 125277 Plate diameter: 100 mm (32) Main motor power: 5.5 kW/7.5 HP Mixer motor power: 1.1 kW/1.5 HP Overall dimensions: largo 1.150 mm, ancho 900 mm, alto 1.800 mm

Height=1.62 m, Overall length= 0.75 m, Overall width= 0.8 m, Net weight= 138 kg,

Height=1.97 m, Overall length= 1.01 m, Overall width= 1.018 m, Net weight= 305 kg,

Height=1.85 m, Overall length= 0.96 m, Overall width= 0.94 m, Net weight= 210 kg,

Height=0.955 m, Overall length= 0.619 m, Overall width= 0.519 m, Net weight= 76 kg,

Height=1.62 m, Overall length= 0.75 m, Overall width= 0.8 m, Net weight= 136 kg,

Kolbe MWE32 Mixed Meat Grinder completely in stainless steel, screw and union nut made of special alloy smooth running Mobile on castors Corners of the lid torn and partially re-welded Machine should be thoroughly cleaned before use Video about test run available

Kolbe MWK32-45 Mixer Grinder Hopper capacity 20-60Lbs - 45 litre Throughput 950kg/hr Main drive motor 4HP, 3KW Mixing motor 0.5hp, 0.37KW The Kolbe MWK32-45 mixer grinder is a compact mincer grinder Perfect for butchers producing small batches of sausage and burger meat.

Height=1.33 m, Overall length= 1.28 m, Overall width= 0.8 m, Net weight= 418 kg,

The Kolbe LW82 meat grinder pictured is for sale. The grinder is equipped with an Unter H82 5-piece blade set, which is freshly sharpened. Furthermore, a second cutting set unground is included. The wolf is in good condition and runs evenly and calmly, only on the snail there is a bump because a pestle that is too long was used, but this does not detract from the function. A video about the test run and more pictures available

Technical data Specifications are subject to change without notice. Dimensions are subject to change. Dispensing width (max.) 130 mm Dispensing height (max.) 75 mm Dispensing length (max.) ~60-280 mm Motor power 0,25 kW Voltage (3-phase) 400/50 V/Hz External dimensions (W x D x H) 616 x 1407 x 1185-1385 m

Bone Band Saw KOLBE K330 Specifications: Type: Kolbe K 330 400 V / 50 Hz / 1.5 kW / 3.4 A / 16A CEE plug Max. cutting side passage: 260 mm Max. cutting height clearance: 310 mm Table dimensions: L59 x D76 cm Machine dimensions: H161 x W72 x D80 cm Saw blade size: 2490 x 16 mm Weight: approx. 155 kg Equipment: Device completely stainless steel Stainless steel base frame Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) including 3 saw blades Left-hand delivery Protection Engine brake Function checked, machine immediately ready for use Stock machine, immediately available! Condition & accessories see original pictures. If you have any questions, email or call. 03423-706493

Bone Band Saw KOLBE K260 Specifications: Type: Kolbe K 260 400 V / 50 Hz / 1.1 kW / 3.1 A Year of manufacture: 2018 Cut side passage max.: 215 mm Max. cutting height clearance: 250 mm Table dimensions: L46 x D70 cm Machine dimensions: H160 x W60 x D70 cm Saw blade size: 2170 x 16 mm Weight: approx. 115 kg Equipment: Device completely stainless steel Stainless steel base frame on 2 swivel castors with brake & 2 fixed castors Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) Left-hand delivery Protection Engine brake Function checked, machine immediately ready for use Stock machine, immediately available! Condition & accessories see original pictures. If you have any questions, email or call. 03423-706493

Bone Band Saw KOLBE K330 Specifications: Type: Kolbe K 330 400 V / 50 Hz / 1.5 kW / 3.4 A / 16A CEE plug Year of Make: 2006 Max. cutting side passage: 260 mm Max. cutting height clearance: 310 mm Table dimensions: L59 x D76 cm Machine dimensions: H161 x W72 x D80 cm Saw blade size: 2490 x 16 mm Weight: approx. 155 kg Equipment: Device completely stainless steel Stainless steel base frame Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) Left-hand delivery Protection Engine brake Function checked, machine immediately ready for use Stock machine, immediately available! Condition & accessories see original pictures.

Bone Band Saw KOLBE K330 S Specifications: Type: Kolbe K 330 S 400 V / 50 Hz / 1.5 kW / 3.4 A Year of Make: 2014 Cutting side passage max.: 280 mm Max. cutting height clearance: 300 mm Table dimensions: L59 x D76 cm Machine dimensions: H180 x W75 x D80 cm Saw blade size: 2490 x 16 mm Weight: approx. 155 kg Equipment: Device completely stainless steel Stainless steel base, height-adjustable Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) Bone flour container is included Left-hand delivery Protection Engine brake Function checked, machine immediately ready for use Stock machine, immediately available! Condition & accessories see original pictures. Sale according to § 25a of the Value Added Tax Act of margin taxation. A proper invoice will  ...

Bone Band Saw KOLBE K260 Specifications: Type: Kolbe K 260 400 V / 50 Hz / 1.1 kW / 3.1 A Year of Make: 2017 Cut side passage max.: 215 mm Max. cutting height clearance: 250 mm Table dimensions: L46 x D70 cm Machine dimensions: H160 x W60 x D70 cm Saw blade size: 2170 x 16 mm Weight: approx. 115 kg Equipment: Device completely stainless steel Stainless steel base frame on 2 swivel castors with brake & 2 fixed castors Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) Bone meal container (removable) Left-hand delivery Protection Engine brake Function checked, machine immediately ready for use Stock machine, immediately available! Condition & accessories see original pictures.

Kolbe K 220 bandsaw, table version. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Kolbe K 300 band saw, stand-alone-version. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Professional bone saw Kolbe K330 is designed for fast, precise and safe cutting of fresh and frozen meat, bones and larger product pieces in butcher shops, processing plants, supermarkets and professional kitchens. This model is an ideal solution for users who require strong performance, reliable operation and high cutting quality in daily professional use. The saw provides fast and even cutting thanks to the high blade speed of 22 m/s, ensuring efficient work and precise cuts. It is suitable for processing bones, carcass sections, large meat pieces and frozen products. Model K330 is equipped with 300 mm wheel diameter and uses a 2490 mm blade, providing stable operation, accurate blade guidance and excellent cutting results. Maximum cutting height is 320 mm, while cutting width is 280 mm. The construction is largely made of stainless steel, ensuring long service life, high hygiene st ...

Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed, and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 150 liters (mixing capacity depending on meat up to 100 kg) Worm, worm housing, and closing are completely stainless Delivery time: after advanced payment machine is generally refurbished and ready for delivery

Set-top model Complete stainless steel body and working table Adjustable blade tensioner Caver safety switch Cover safety saw Length is adjustable thanks to the standard joinery System cutting thickness property Maintenance-free compact design Machine dimensions in cm: Length: 100 Width: 90 Height: 190 Electric power: 2.5kW

Mixer - Grinder KOLBE Type: MWE 32 Diameter: 100mm Chopper volume: 120l Capacity for 3 mm: 1400 kg/h Mixing speed: 24 rpm/min Power main motor: 5,5 kW Power mixing motor: 1,1 kW Dimensions: 1250 x 800 x 1350 mm Weight netto: 480 kg Condition: Used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Used-refurbished machine Enterprise cutter 1700 kg/h capacity 120 L mixing chamber 6 months warranty Technical data Motor power: 5,5 + 1,1 kW Power supply: 25A Feed height: 1267 mm Dimensions: 770x1350x1330 mm Weight: 480 kg

The machine is in good condition. Technical data: 130mm hole plate diameter 1 speed working pulley 1 speed feed screw 130 litre tank capacity Width: 1250 mm Depth: 1000 mm Height: 1550 mm Installed power: 11,0 kW, 23 A Voltage: 380 V, 50 Hz

Kolbe K330 Bone Band Saw used Machine is equipped with motor brake, sliding table and portioning stop good condition, only the bone meal container is missing and the machine must be thoroughly cleaned before use Sliding table can be folded away to the side, portioning stop and pusher can be removed The belt is tensioned via a quick-clamping system and the cutting height can also be adjusted and the table can be folded up for cleaning Video about test run available

Main features, - Rugged industrial meat grinder, - Designed for high production performance, - Large filling basin with safety cover, - Powerful worm drive, - Including worm, cutting insert, and hole discs, - Established German quality, ---------------------------------------------------------------, ⚙ Technical data, - Type: AWE 130, - Power: approx. 11 kW, - Connection: 400 V / 3 Ph / 50 Hz, - Hole disc diameter: 130 mm, - Current consumption: approx. 21,5 A, - Power: up to about 1,500 – 3,000 kg/h (depends on the product), ---------------------------------------------------------------, Areas of application, Ideal for:, - Meat processing plants, - Butcher shops, - Convenience production, Suitable for fresh as well as lightly frozen meat., Dimensions / weight: L x B x H: 1,200 x 1,000 x 1,450 mm

With single mixer in the hopper and safety cover over head, Hole plate diameter: Enterprise, E52, 130mm, Capacity: max 2000 kg/h, Hopper: 120 litre, Power: 3 x 400V, 8.6kW, Dimensions: 1550 x 950 x 1500 mm, Weight: 560 kg

Bone Band Saw KOLBE K260 Technical data: Type: Kolbe K 260 400 V / 50 Hz / 1.1 kW / 3.1 A Year of construction: 2024 Cut side passage max.: 215 mm Max. cutting height clearance: 250 mm Table dimensions: L46 x D70 cm Machine dimensions: H160 x W60 x D70 cm Saw blade size: 2170 x 16 mm Weight: approx. 115 kg Equipment: Device completely stainless steel Stainless steel base frame on 2 swivel castors with brake & 2 fixed castors (optional equipment!) Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) Bone meal container (removable) Left-hand delivery Engine protection Engine brake RRP. in this special version: EUR 8,817.90 Function checked, machine immediately ready for use Stock machine, immediately available! Condition & accessories see original pictures. If you have any questions ...

Stainless horizontal fish slicer with adjustable thickness, adjustable stroke and speed.

PVS -Micro-Cut or emulsifiers. Formerly called Kolidmühle For shredding various products Production of emulsions Pastes Sauces Soups and various other products Capacity up to 150 litres Motor power 15 KW

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 478 The usefull capacity of the BAADER 36 and 134 herring filleting machine can be increased by a combination with the BAADER 478 automatic feeder wich aligns herring, sprats, sardines and similar fish and feeds them to the processing machine. A variable-speed elevator raises the fish from a water filled hopper and delivers them uniformly to five feed channels. Fish traveling head forward are led directly to the timing device. Fish with tail leading are turned around. The timing device releases single fish synchronized wuth the processing machine and transports them through a back and belly aligning device into the feed troughs of the processing machine. It can be combined with Filleting machine for herring, sardine, Baader 134

FILLETING MACHINE BAADER TPYE: 184 Technical description: Machine number: 10.3320 0184 Power supply: 380 V, 3 Ph, 50 Hz, 11.5 kW, 22.0 A Plastic conveyor belt width: 500 mm Band width: (2x) 160 mm Throughput: 24-40 pieces/min Water consumption: 25 l/min Weight: 2.500 kg Dimensions: 5400 x 1300 x 1450 mm This machine is laid out for filleting gutted and headed cod, haddock, saithe, hake, merluza and withing from 30 to 70 cm in total lenght (=0.3 to 2.5 kg, gutted including head). Proven BAADER filleting system providing for highest yield and reliability. The BAADER 184 is equipped with an integrated skinning device.

TROUT GUTTING MACHINE BAADER, TIPO: 140 Technical description: Serial number: 74-9019-0140 Power supply: 380 V, 3 Ph, 50 Hz, 7 A Dimensions: 3050 x 550 x 1240 mm This machine is laid out for gutting trouts of a live weight from 240 to 650 g in a commercial manner. The abdominal cavity is cleanly cut open and the guts including the kidney are completely removed by means of a vacuum suction device. The special design of the BAADER 140 is capable of gutting up to 38 fish/min. The gills can either be removed or retained; this requires an easy adaption.

HEADING MACHINE, BAADER 421 Technical description: Machine number: 10-4604-0421 Belt width: 300 mm Lift height: 1050 mm Estimated throughput: 35 fishes/min but varying in accordance with fish size and stillness of the operator Water consumption: 12 l/min Weight: 520 kg Dimensions: 2350 x 1600 x 1750 mm

EEL GUTTING MACHINE, BAADER TYPE: 143 Technical description: Serial number: 10-3404-0143 Power supply: 220-380 V, 3 Ph, 50 Hz, 6.5 A, 2.5 kW Clearance: 125 x 110 mm Dimensions: 3000 x 1000 x 1250 mm The BAADER 143 guts eel from 130 to 1200 g, the gutting cut is performed in the usual way. The belly cavity is cleaned by scaper, a suction scoop and a rotating brush, the machine can be adjusted for 3 size ranges. Eel support troughs, scrapers and scoops for the different size ranges can easily be exchanged.

CEPHALOPOD CUTTER WITH POSITIONING BAND, MECALSA TYPE: MC CTDP/CH200 Technical description: Material: Stainless steel Voltage: 380/440 V Frequency: 50/60 Hz Cutting pitch between blades: 40 mm

FILLETING MACHINE BAADER 35 (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WITHING (22-40 CM) AND OTHER PELAGICS Technical description: Machine number: 10-1363-0035 Throughput rate: 100-200 pieces/min Voltage/Power: 380 V, 3 Ph, 50 Hz, 11 A Dimensions: 3950 x 2600 x 1550 mm Weight: 835 Kg The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482 or 484. A skinning machine BAADER 55 can be att ...

GUTTING MACHINE FOR HERRING, BALTIC HERRING, SARDINES, MACKEREL AND WHITEFISH ARENCO MODEL: CIS Technical description: Power supply: 380-440 V – 50-60Hz Conveyor width: 260 mm Dimensions: 3600 x 900 x 1330 mm

GRADING - WEIGHINF MACHINE MAREL, TYPE: A320 Technical description: Number of stations: 8 Feeding conveyor: 4300 x 1005 x 1970 mm, working width: 450 mm Weighing conveyor: 1900 x 750 x 1640 mm, working width: 300 mm Grading conveyor: 6200 x 1500 x 1550 mm, working width: 385 mm

SEPARATOR, SEPAMATIC, TYPE: SEPA 410 Technical description: Machine number: 107 306 Drum diameter: 90 mm Includes 1 drum (to choose between different perforation diameters: 1,75mm; 2mm; 3mm; 5mm). Power supply: 400 V, 50 Hz, 6 A, 2,2 kW Capacity: up to 800 kg per hour Dimensions: 1500 x 1200 x 2850 mm Includes pallet with additional drum with holes: 3 mm, and spare parts.

4 WAYS PINE-BONE REMOVER, WMT Technical description: Material: Stainless steel Aisi-304 Power supply: 380/440 V - 50/60Hz Mesh width: (x4) 245 mm Working width: (x4) 210 mm Dimensions: 2050 x 1650 x 1650 mm

REF-2531 CARNITECH CT2612 TWIN-LANE SALMON PINBONE REMOVER This machine is designed for removing the pin bones from salmon and trout fillets. Made of stainless steel. Easy operation and cleaning. Only one worker is required. Manufacturer: CARNITECH. Model: CT2612.25. Year: 2003. Capacity: up to 18 fillets/min per lane (total capacity 36 fillets/min). Product size: fillets from 0.5 to 3-4 kg. Electrical specifications: 3x400 V+N+PE/50 Hz/16 A. Water consumption: 12 l/min. Overall dimensions: length 1,700 mm; width 850 mm; height 1,820 mm. Belt width: 580 mm. Weight: approx. 150 kg.

REF-2532 CARNITECH CT2611 "NORTHERN LIGHT" FISH FILLETING MACHINE Designed for cutting into two fillets and removing the backbones of salmon, trout and other fish species with a similar bone structure. It is characterized by perfect cuts, high yield percentage and a high processing capacity. Easy operation and cleaning. Can be efficiently operated by a single worker. Manufacturer: CARNITECH. Model: CT2611 NORTHERN LIGHT”. Year: 2001. Capacity: up to 20 fish/min (depending on product size). Product weight: 1.5 - 7 kg. Voltage: 3 x 400 V. Overall dimensions: length 2,000 mm; width 750 mm; height 1,700 mm. Weight: approx. 260 kg.

Baader 694 Bone Separator 500kg raw material per hr 3mm drum New belt and new blade, serviced.

Baader 697 Bone Separator Model: 697 Rated at 1200kg raw material per hr 3mm drum Ex butter factory. Supplied with new side hopper Full working order

Baader 580 Fish Filleting Machine x2 units available 2012 & 2004 Regularly serviced and well maintained, ex factory Whitefish

Baader Filleting Line Includes conveyors, header, 588 filleting machine, trimming line, spares, shaprening machine 2021 Full details on request

Baader Fish Filleting Machine Model: 185 Designed for medium-large whitefish Last used on cod/haddock Overhauled in 2020 and little use since

Fish Skinning Machine Make: Steen Model: ST600 Built 2008 Regularly serviced and well maintained

Deglazing Machine Electrically heated 1000mm belt width Make: Sharp Built 2019

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 488 Technical description: Power supply: 400 V, 50 Hz, 3 Ph Approx dimensions: 3100 x 1400 x 1900 mm It can be combined with Filleting machine for herring, sardine and mackerel Baader 35

FILLETING MACHINE FOR MACKEREL, VMK Technical description: Belt width:70 mm Power supply: 220/380 V, 50/60 Hz Total dimensions: 2360 x 800 x 1680 mm

FILLETING MACHINE BAADER TYPE: 208 Technical description: Output conveyor width (x2): 108 mm Power supply: 400V / 50 Hz Power: 2,6 kW Dimensions: 3750 x 1050 x 1250 mm This machine processes small gutted and headed hake, small haddock, saithe, cod and whiting. The cuts of the spring-loaded circular knives being controlled by the fish itself, the BAADER 208 produces single fillets with skin of high quality and with best yield. The BAADER 208 is easy to maintain and to operate. All functional areas are very well accessible. The machine is of robust construction and consists mainly of stainless materials so that it has a long service life also when used at sea.

HEADING AND FILLETING MACHINE FOR SALMON AND MORE, CARNITECH TYPE: CT2620 + CT2630 Technical description: Heading machine CT2620 Power supply: (3x) 400 V, 50 Hz, 8 A Machine number: 08-0081 Year: 28/08/08 Dimensions: 4200 x 2100 x 1800 mm Filleting machine CT2630 Machine number: 08-0067 Year: 18/06/08 Power supply: (3x) 400 V, 50 HZ, 11 A Dimensions: 1800 x 850 x 2000 mm CT 2620 has been designed for head and tail cutting of salmon fish from 2 to 7 kg. The product is fed to the machine via a feeding chute, after which several operations are carried out on the fish, as the round attachment rotates one quarter of a revolution for each push on the button on the operation panel, see section 3.0 for further details. During initial operation, the occiput is sawed through with a round knife, where upon a guillotine knife tilts down to cut off the head, which then lands in the waste carrier  ...

SALMON BELLY SLICER, KAJ OLESEN A/S, TYPE TRIM-UNIT Technical description: Serial number: 11-01 Power supply: 3X400 V; 3,0A Bandwidth: 590 mm Dimensions: 2600 mm X 1150 mm x 1300 mm

FILLETING MACHINE, BAADER 36 Technical description: Power supply: 400 V/50Hz Dimensions: 3500 X 1000 X 1700 mm - 2300 X 1000 X 1100 mm Can be combined with Automatic feeder BAADER 488 The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483 or 484. A skinning machine BAADER 55 can be attached for the production of skinless herring fillets.

FILLETING MACHINE FOR SARDINE, HERRING, BLUE WHITING, BAADER TYPE: 134 Technical description: Power supply: 380 V, 50 Hz, 12,0 A, 2 kW, 3 Ph Dimensions: 3000 x 2100 x 1200 mm Weight: 450 Kg Can be combined with Automatic feeder for sardine and herring, Baader type: 478 This machine is especially designed for the filleting of small herring and pilchard with an overall lentgh of 15-25 cm (25-125 g), the convenient infeeding procedure and the steplessly adjustable operating speed permit high throughput. Excelent yield is guaranteed by a meat-saving selfadjusting headcut, adjustable tailcut and reliable passage through the filleting tools leading to smoothly cut block-fillets, single fillets without dorsal fins as well as belly cut herring with or without tail fins. Combined with the automatic feeder BAADER 478, the machine becomes an automatic filleting unit operated by only one person fo ...

FILLETING MACHINE BAADER 35 WITH NOBBING SYSTEM (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WHITING (22-40 CM) AND OTHER PELAGICS Technical description: Serail number: 10-1363-0035 Year: 1992 Throughput: 100-200 pieces/min Dimensiones: 3300 x 1250 x 1800 mm The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483, 484 or 488. A skinning machine BAADER 55 can be attached for the produc ...

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-2C Technical features: Output: up to 50 cans/minute Recommended output: 20 to 50 cans/minute (according the can type) Format: diameter 150 mm Cans height: max. 120 mm

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-110 Technical features: Output: up to 100 cans/minute Recommended output: 40 to 80 cans/minute (according the can type) Formats: 1 unit with format diameter 73mm (ID 2015) 1 unit with format diameter 99mm Others formats: diameter 65mm, 1/2 oval, 1/4 oval Cans height: 25-62mm

GRADING - WEIGHING MACHINE, MAREL PROLINE, TIPO: GRA-PR30-04 Technical description: Serial number: A064049 Number of stations: 4 Power supply: 220/240 V - 50/60Hz Conveyor band: Intralox series 1650 ftpp b = 305 Conveyor width: 305 mm Total dimensions: 4900 x 1300 x 1650 mm

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-200 Technical features Output: up to 200 cans/minute Recommended output: 150 to 180 cans/minute (according the can type) Format: diameter 83,7 mm Cans height: 25-62 mm

The machine has been maintained well, bought in 2021. Located in Estonia, Harju. Video available.

see picutre for hours Find more here - .ucymachines/ Contact us at - sales@ucymachines

Height=1.06 m, Overall length= 0.9 m, Overall width= 0.71 m, Net weight= 75 kg,

Height=1.46 m, Overall length= 0.51 m, Overall width= 0.53 m, Net weight= 208 kg,

automatic meat ball and fishball forming machine, beef balls, pork balls, fish balls, squid balls, 400-600kgs hour, 18-35mm diameter, stainless mobile frame, 3Ph

10 station grading line Mettler Toledo advanced check weigher Weight range 50g to 8000g Weigh table size - 300mm wide x 630mm long Automated box handling system Complete with loaders Critical spares Overall dimensions 8500mm long x 1400mm wide

Automatic slicer Bizerba A 404, with base frame. The machine is immediately available and can be tested in Koblenz, Germany.

Automatic slicer Bizerba A 404 with base frame. The machine is immediately available and can be tested in Koblenz, Germany.

complete stainless steel Track width 600 mm Adjustable height of the finished product from 2 to 35 mm stepless speed (lower and top belt can be adjusted separately) with executable belt Mobile 0.5 kW Dimensions (L x W x H) : ± 2,250 x 1,000 x 2,100 mm

Slicer Bizerba Year of construction 2000 Price on request

all stainless steel belt width 600 mm to form meat balls from 6 to ± 80 gr suitable to put in line with a forming machine (VM 400) adjustable speed mobile dimensions (l x w x h) : ± 1.300 x 700 x 1.500 mm

Slicer Bizerba VS 8, Connection 230V, weight approx. 44kg, good used condition, works perfectly several in stock

Manual slicer with integrated packaging module KUCHLER S.A.M. 300 psh + foil machine + packer Specifications: Type slicer: SAM 300 Psh T Type film dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM T 26 230 volts / 50 Hz / 3.24 A Year of construction: 2010/2011 Film size: 21 x 26 & 21 x 22 cm several layers on top of each other can be welded Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 300 mm Stainless steel knife, Teflon coated Luminous flux Function tested, machine immediately ready for use! Condition, see original pictures! If you have any questions, email or call.

Conveyor width: 600 mm Cut by knife cylinder Cutting width 7,0 mm Supply and unloading conveyor Machine dimensions in cm: Width: 120,0 Length: 170,0 Height: 130,0 Voltage: 400 V, 50 Hz

Ham press Erhard approx. 120 liters capacity, completely in stainless steel, compressed air operated, with intermediate boards and stainless steel brackets, Dimensions LxWxH approx. 107x59x99cm, weight approx. 180kg, good used condition, works perfectly

Forming machine for meat and alternatives

Aufschnittmaschine / Slicer GRAEF MASTER 3370 Specifications: 230 Volt / 50 Hz / 2.2 A / 450 W Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife Luminous flux Machine with CERA 3 coating Weight: 40.3 kg Cutting size square: 300 x 224 mm Cutting size: Ø 190 mm External dimensions (L/W/H): 660 x 620 x 470 mm Installation area (L/W): 585 x 440 mm Carriage dimensions (L/W): 300 x 340 mm Knife speed: 229 rpm Noise level:

Inclined Slicer Slicer / Slicer BIZERBA GSP H Specifications: 230 Volt / 50 Hz / 1.79 A / 0.360 kW Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife Luminous flux Year of Make: 2017 Function checked, machine ready for immediate use! Condition, see original pictures!

Italma slicer, flywheel machine on a pedestal, red lacquered in vintage style, knife diameter 330mm, the flywheel automatically drives the blade, carriage and feed, an eye-catcher for customers. Weight approx. 123kg, Machine used, in good condition, fully functional

REF-2049 BIZERBA A 404 FB AUTOMATIC SLICER Automatic slicer manufactured by Bizerba Machine number: 10597824 Model: A 404 FB Year: 2009 30-55 strokes/min Slice thickness: 0.5-12 mm Cutting carriage: 400 mm Overall dimensions: 1,560 mm length, 1,000 mm width, 1,540 mm height