khs kisters beverage machines used for sale

1 of used film-only multi-packer, make KHS/Kisters, type SP A-H (Advanced, High-speed), with ST-A 1000 shrinktunnel, new 2008. Siemens S7, Indramat MI-Technik servos, automatic film splicer. Operating side: left. Used for upto 120 cycles/minute in a 72.000 cph line. Set for standard beverage cans (66 mm) packing them as 2x2=4, 3x2=6, 4x2=8, 4x3=12, 5x2=10 and 5x3=15. Quick change-over machine.

1 of used film-only multi-packer, make KHS, type Innopack Kisters SP 050 B2, new 2013. Operating side: links. Used for PET bottles 250/500 ml as 3x2=6-packs (dual lane) and 6x2=12-packs as well as 6x4=24-packs (single lane) in clear or print-registered film. Quick change-over via servos and spindles. Capacity upto 50 cycles per minute. Siemens S7 controls.

1 of used film-only multi-packer, make KHS/Kisters, type SP A-H (Advanced, High-speed), with ST-A 1000 shrinktunnel, new 2015. Siemens S7, Indramat MI-Technik servos, automatic film splicer. Operating side: right. Used in a 60.000 cph line (+30% overspeed). Set for standard beverage cans (66 mm) packing them as 2x2=4, 3x2=6, 4x2=8, 4x3=12, 5x2=10 and 5x3=15. Quick change-over machine.

1 of used trayshrinkpacker, make Kisters (KHS), type 97/50. Built 1987 with new controls (Siemens S7, Rexroth servos) fitted in 2012. Originally used to pack the following loose beverage cans as 6x4-24 on tray with film: standard diameter 66 mm and sleek diameter 58 mm at a speed 50 trays/minute (splitter pin collating), as well as slim 53 mm diameter cans at 25-35 trays/minute (gating type collating). Last used to pack various cardboard multipacks (roller-bolt collating) on tray with or without film. Operates from left to right as seen from operator's station.

1 of used PadShrinkPacker, make KHS/Kisters, type PSP A-H (Advanced, High-speed), new 2013, operating side left, with Allen Bradley controls and Rexroth MI servo technology. With bobbin splicer. Used to pack various collations of standard 66 mm diameter beverage cans on pad plus film or in film-only. Was running in a canning line with nominal speed of 109000 cph.

1 of used high-seeed film-only shrinkwrapper / multipacker, make KHS/Kisters, type Innopack SP A-H, new 2013. Operating side: left. Used for beverage cans diameter 66 and 58 mm in various collations. Siemens S7 PLC with MI-servo controls. Gas-fired shrinktunnel (can be converted to electrical).

1 of used high-seeed film-only shrinkwrapper / multipacker, make KHS/Kisters, type Innopack SP A-H, new 2013. Operating side: right. Used for beverage cans diameter 66 and 58 mm in various collations. Siemens S7 PLC with MI-servo controls. Gas-fired shrinktunnel (can be converted to electrical).

1 of used medium-speed film-only shrinkwrapper / multipacker, make KHS/Kisters, type Innopack SP A-M, new 2013. Operating side: left. Used for 500 ml PET bottles in various collations at a maximum speed of 70 cycles per minute (depending on format). Siemens S7 PLC with MI-servo controls. Electrically heated shrinktunnel.

1 used pad shrink (plate + film) packer, manufactured by KHS, type Innopack PSP 050 B (Basic), built in 2011, operating side right. Siemens S7 PLC, Rexroth servo drive technology. Most recently used for packaging various PET bottles (pre-packed in shrink film) on pad plus film in several formats at an output of 37 cycles/minute. Max. output 50 cycles/minute depending on the format. Suitable for packing loose products on pad plus film or film-only. Top condition.

1 of used trayshrinkpacker, make Kisters (KHS) type 140/60, new 1989, operating side left. Fitted with Siemens S7 controls / HMI and Bosch Rexroth servo drive MI-technology in 2012. Nordson hot-melt unit Originally supplied to pack food cans as 4x3 and 6x4 on tray plus film. Last used for food cans as 6x2 and 4x3 on tray + film. Size-adjustable via spindles and servos. Maximum capacity 60 trays/minute (depending on product).

1 of used tray-/padshrinkpacker, make KHS Kisters, type Innopack TSP 80 V with 180-degree (clockwise) curve and shrinktunnel, new 2004. Machine has an 8-lane infeed and is capable of producing trays (and/or) pads either single lane (i.e. 24 cans/bottles per tray/pad) or dual-lane (i.e. 12 cans/bottles per tray/pad) in shrinkwrap film (print-registered), at a maximum capacity of 80 cycles (i.e. 80/160 trays) per minute. Operating direction: from right to left as seen from operator\s station. With Allen Bradley Control Logix PLC / Panel View 1000, Indramat servo drives, ITW Quattro hot-melt unit. Both packer and shrinktunnel easily adjustable via servo\s and spindles for various formats as well as single-/dual-lane. Wired for 480V/60Hz. Various manuals available. Equipment in excellent condition!

1 of used wrap-around packer, make KHS/Kisters, type WP 050 V (quick change-over via servos and spindles), new 2002, operating side left. Capacity upto 50 cycles/minute. Siemens S7 controls with Rexroth EcoDrive servo drives. Nordson Vista 3700 hot-melt unit. Used to pack various 400 - 2.000 ml PET bottles as 2x2, 3x2, 3x4, 3x5 and 4x6 loose in wrap-around cartons.

1 used wrap-around packer, manufacturer KHS/Kisters, type WP 050 (quickly switchable by servo's and spindle), built in 2002. Operating side on the left. Power up to 50 cycles/minute. Siemens S7 control and Rexroth EcoDrive servo drives. Nordson Vista 3700 Hot Glue Device. Last used to pack 400 to 2,000 PET bottles as 2x2, 3x2, 3x4, 3x5 and 4x6 loose in wrap-around cartons.

1 of used Kisters filmstation for potential use as training module. Ex a Kisters 197/100 D. Can be supplied with ancillaries such as vacuum fan, film-reel spindle and film brake, etc. Modules for various KHS/Kisters/ZVT machine types in stock!

1 of used trayshrinkpacker, make Kisters (KHS), type 97/50. Built 1987 with new controls (Siemens S7, Rexroth servos) fitted in 2012. Originally used to pack the following loose beverage cans as 6x4-24 on tray with film: standard diameter 66 mm and sleek diameter 58 mm at a speed 50 trays/minute (splitter pin collating), as well as slim 53 mm diameter cans at 25-35 trays/minute (gating type collating). Last used to pack various cardboard multipacks (roller-bolt collating) on tray with or without film. Operates from left to right as seen from operator's station.

1 unused! PC09 programmable controller, make Kisters, type PC09, new 1999. OEM spare part number X000500001.

1 of used high-speed film-only shrinkpacker - multi-packer, make KHS, type Innopack SP A-H, new 2013, operating direction right. Used to pack standard and sleek beverage cans as 2x2=4 3-lane, as well as 3x2=6, 4x2=8, 5x2=10 and 4x3=12 dual-lane. Siemens S7 controls, automatic film-splicing. Capacity upto 125 cycles/minute depending on product/configuration.

Labeler, make KHS, type: Innoket KL 2080/120-48, speed up to 50.000 bph, right-machine, for cold glue labelling, adjust to 0,33 lt. and 0,5 lt. Longneck-bottles as too 0,5 lt. NRW-bottles, with 2 aggregates for body-, shoulder- and back label, as too neck ring, with 48 bottle dishes, 5 gripper cylinder, 6 glue pallets, with steel glue roller, carousel-Ø: 2.080mm, pitch: 120 mm, with Siemens S7 control, built 2003

1 of used trayshrinkpacker, make KHS/Kisters, type TSP 080V, new 2002. Operating side: right. Siemens S7 controls with Bosch/Rexroth/Indramat Servos. Capacity upto 80 cycles/minute. Originally used to pack 330/355 ml standard (D 66 x H 115/122 mm) beverage cans loose and pre-packed as either 6x3=18 or 6x4=24 on tray + film. Last used for 500 ml PET bottles (D 64 x H 204 mm) as 4x3=12 on tray + film.

Used KHS PET stretch blow molder, year of manufacture: 2016, type: Inno PET Blomax 10S, 10 cavities, output approx. 14,000 - 22,000 bottles / hour, PCO 1810, currently set up to 0.5 - 1.5, optionally with air transport. Used KHS Blow Molding PET Blowing Machine, Year: 2016, Type: Inno PET Blomax 10S, 10 cavities, Range of capacity 14.000 - 22.000 bph, Bottle Neck PCO 1810, now adjusted to 0.5 - 1.5 / 500ml - 1.500ml, optional PET bair conveyors available.

KHS InnoPET Blomax 8 blow moulding machine Manufacturing year 2009 Capacity 14.400 bph Set for 8 quick change molds Personnalisation for preform neck 29/25 still mineral water Linear oven equipped low consumption Machine composed by: - preforms pallets tipper, hopper & feeder - PCC drive & control - KHS electrical cabinet - HP air recycling system The full air conveyor system EZS is available in option. Machine very well serviced is in exceptional condition. Machine in production till end June 2026

On behalf of our client, we are selling this KHS Blomax 16 PET blow molding machine which is designed for the automated production of PET bottles. It ran together with 2x KHS Absofill / ABF 710 machines before (one of these 2 we are also selling on our , .hamburg-machinery/listings/7469327-used-aseptic-pet-bottle-filling-ma chine-khs-innosept-absofill-abf-710-03). It is dismantled ± 8 years ago and is stored since in a closed warehouse. The client bought the machine used and decided not to blow bottles themselve, but buy them from another supplier, already blown. This bottle blower is direct available. Loading on the truck / inside the container will be done by the dairy factory., The machine was used to blow PET bottle for a fruit juice factory in Germany. Capacity: 28.800 bottles/h. Bottle size: min. 200 ml and max. 2.000 ml. Current bottle neck nominal diameter: 38 mm. With the same  ...

1 of used wrap-around /traypacker, make ZVT (KHS), type Innopack WP 030 VH. New 2000. Operating side; left. Capacity upto 30 cartons/trays per minute (depending on product and blank dimensions). Siemens S7 PLC with OP 17, Indramat Servos, Nordson hot-melt unit. Wired for 400V / 50 Hz. Used for packing various 330 ml upto 2.000 ml glass and PET bottles as 8/12/20/24 on tray or in full wrap-around cartons. Last used as tray-packer only. Various manuals available. Condition: good. Dismantled and available cleaned ex-warehouse The Netherlands.

with 30 filling valves 5stelligem natural corker 5stelligem aluminium screw capper for 28 mm standard caps Direction: left - right

KHS Seitz high vacuum filler for vicous products Type: Seitz wich with 12 filling valves solo machine complete recondizioned

With 48 filling valves 12head crown corker 12head screw capper

Complete non-returnable glass bottling line for hot fill and cold fill Krones / KHS Capacity: up to 33.000 bph by 500 ml glass bottles (the capacity depends on the product, the product temperature and CO2 content) Products: juices like orange juice, apple juice, tomato juice, etc. but also cold fill products like CSD with CO2 Bottle sizes: 250 ml - 1000 ml Capping type: 28 mm aluminium 33 mm aluminium twist-off cap 43 mm aluminium twist-off cap (the twist-off capping machine is included in the scope of supply) Labelling: paper labels with cold glue on the bottle Packaging: wrap around packaging (full carton) or tray packaging but without foil shrinking station Depalletizing and palletizing: full automatically Year of manufacturing: 1999 - 2007 This line was in production until end of 2025 in a German fruit juice and CSD company. It is stil ...

Bottle cleaning machine One end Manufacturer: SEN, KHS Type: Riwella VB 12/11-2, Built: 1987, Power: 5700 Fl/h, Bottle size: 55- 92 mm, length 170- 360 mm. Overhauled, with warranty

with 16 filling valves and 1-head aluminium screw capperfor 28 mm closures capacity: approx. 2,000 fl./h running direction: left - right product: Juice (hot filling) with stainless steel control cabinet

with 40 filling valves work directionl: left - right including safety housing and stainless steel enclosure

3 sets of blowing moulds for KHS SIG Blomax 8: 1 complete set for 330 ml blowing moulds (8 pieces) 1 complete set for 1000 ml blowing moulds (8 pieces) 1 complete set for 1500 ml blowing moulds (8 pieces) Type of the blowing machine Blowing machine KHS / SIG type: BLOMAX 8 III year of manufacturing: 2004 capacity: max. 13.000 bph neck finish: PCO 28 - 1881

New glass depalletizer KHS type: Innopal Lord II ASN year of manufacturing: 2000 capacity. 30.000 bph with Siemens S 7 electric, incl. pallet transport and pallet magazine incl. sheet layer removal system The machine is depalletizing the empty bottles on a height at approx. 1.150 mm.

Bottle filler, make. KHS, type: VVF-90-KK16-SV16, with 90 filling valves, with 16-head crown cork and 16-head screw capper, built 1989

Filling/Seaming machine for carbonated drinks. Filler has 32 filling heads and seaming machine has 6 heads. Seaming machine FERRUM includes lids feeder "ROTOFEEDER" Speed of the machine is 15000 CPH/500 ml. Lids 202 Machine will be reconditioned in 2023

Qty. 1 Second-hand bottle filling line Mfc.: KHS, Siemens (SSW), Krones, Uni-Mac, Rink, MIHO etc. Built: 1986 – 2015 Capacity: 24 000 Bottles/h

System: KHS Type: Innofill-UM Compacta 40-10KK For bottling juice and spirits Pitch Circle : 1440 / 360 Pitch : 36 Pi Width: 3295 mm Depth : 2330 mm Maximum height : 3690 mm Weight: approx. 8,000 kg System: KHS Type: Innofill-UM Compacta 40-10KK For filling juice and liquor Pitch circle : 1440 / 360 Pitch : 36 Pi Width : 3295 mm Depth : 2330 mm Maximum height : 3690 mm Weight: approx. 8,000 kg

1 of used wrap-around packer, make KHS, type Innopack WP A-H (Advanced, High-Speed), new 2011, operating side left. Siemens S7 controls, Rexroth servo drives. Last used for various round and rectangular PET bottles in multiple configurations, at a maximum speed of 93 cycles/minute. In excellent condition.

KHS/ALFILL ULTRACLEAN RINSER-FILLER-CAPPER Model: linefill CP48-16-8, Year of make: 2003 Capacity: 6000 bottles per hour Bottle volumes: 1000 ml, 750 ml, 500 ml, 330 ml, 250 ml, 200 ml Format change time: 15 minute USED SLEEVER CLEVER USED SHRINK TUNNEL USED ACCUMULATION CONNECTION AND EXIT CONVEYOR SYSTEM

34,000 CPH - 330ml in 24 pack Carton 24,000 - 28,000 CPH - 330ml, 440ml in various 2/4/6/8/10/12 Pack configuration Year: 2015 – 2022 Location: Scotland Featured items: FIPAL MINIDEPAL 20 LA DEPALLETISER TWIN LANE RINSER KHS INNOFILL CAN DVD 40 FILLING BLOC 34,000 CPH FERRUM F6 6 HEAD SEAMER CSW DEVENTER LID FEED SYSTEM HEUFT SPECTRUM TX EURO SISTEMI CAN DRYERS TELEDYNE TAPTONE INSPECTION ROBOPAC PRASMATIC TC400 COMPACT CASE PACKER FT SYSTEM CP600 TP TUR300 Z200 RAS001 GPI QUICKFLEX 300 MULTI-PACKER HITACHI INK JET PRINTER PACKITAL LANER COMPLETE CONVEYOR SYSTEM FIPAL PAL 80 F PALLETISER ATLANTA STRETCH REVOLUTION LS STRETCH WRAPPER Get in touch for pricing and to book a viewing. Indassol

Pasteurizer KHS type Innopas capacity: approx. 25.000 bph with 8 pasteurizing zones working area: 113,5 m² inlet temperature: 15°C outlet temperature: ± 38°C max. pasteurization temperature: 75°C fresh water temperature: 15°C pasteurization time complete: 48,5 min. - warming time: 21,2 min - pasteurization time: 12,3 min. - back cooling time: 15,0 min. including Siemens touch panel and Siemens S 5 PLC dimensions of the pasteurizer: width: 4.210 mm length: 21.000 mm height: 2.750 mm weight netto: approx. 27.500 kgs The pasteurizer is out of production since May 2024 technical details: see pdf document already dismantled and on our stock / Germany very good condition

Type: Promeco 2000 ETK Year of Make: 2004 Electr. Connection: 1AC/N/230V 50-60Hz/ 3.0A The Innocheck Promecon 2000 testing system is equipped with a PC base system, camera, illumination panel and monitor.

Qty. 1 Second-hand can filling line Mfc.: KHS, Roteg, Bizerba, NSM, Videojet, GFKK, Beyer Maschinenbau GmbH, M.J. Maillis, Rudert Edelstahl Technik GmbH, Ullrich Gmbh Built: 2007 - 2014 Stopped: 12/2023 Can sizes: 3.1 L & 5.0 L Filling product: Pilsener & Wheat beer Filling temp.: 4°C CO2 – Volume max. Pilsener: 5.5 g/L Wheat beer: 6.5 g/L Capacity: Can size: 3.1 L 650 cans/h of pilsner 600 cans/h of wheat beer Can size: 5.0 L 700 cans/h of pilsner 600 cans/h of wheat beer Can dimensions: 3.1 L – dia. 175 x 165 mm 5.0 L – dia. 175 x 246 mm Can suppliers: ARDAGH, & HUBER Disposable NOTE: Please note that some parts of the brewery are for sale, such as vertical and horizontal tanks, heat exchangers, weighing device, separator, pipe drag conveyor, compressors, flanges, div. stainless steel pipes, control valves, boilers etc. Further information can be  ...

KHS filling machine for bottles with crown cork capper – model SFV Manufacturer: KHS Model: SFV Filling Machine with Crown Capper Filling valves: 100 Capping points: 18 Capacity: Up to 50,000 bottles per hour (0.5 l bottle, depending on the product) Running Direction: Right – Left This KHS bottle filling machine, equipped with a crown cork capper, offers an output of up to 50,000 bottles per hour. It is ideal for filling CO2-containing beverages such as beer and soft drinks. The current condition of the machine is very good – it has been regularly serviced and has numerous additional equipment. Sizes: • Equipped for 0.33 l longneck bottles and 0.33 l Steinie bottles. • Additional bottle formats can be set up as an option. The machine is available at short notice. With 100 filling valves and 18 capping points, this bottle filling machine is ideal for large production  ...

KHS filling machine for bottles with crown cork capper – model SFV Manufacturer: KHS Model: SFV Filling Machine with Crown Capper Filling valves: 100 Capping points: 18 Capacity: Up to 50,000 bottles per hour (0.5 l bottle, depending on the product) Running direction: left - right This KHS bottle filling machine, equipped with a crown cork capper, offers an output of up to 50,000 bottles per hour. It is ideal for filling CO2-containing beverages such as beer and soft drinks. The current condition of the machine is very good – it has been regularly serviced and has numerous additional equipment. Sizes: • Equipped for 0.33 l longneck bottles and 0.33 l Steinie bottles. • Additional bottle formats can be set up as an option. The machine is available at short notice. With 100 filling valves and 18 capping points, this bottle filling machine is ideal for large production vo ...

Bottling line for breweries – capacity: 15,000 bottles per hour This bottling line was installed in 2015 by the German manufacturer Hormes as part of a complete brewery. The entire bottling line has been dismantled and is available. The production capacity is 15,000 bottles per hour, ideal for 0.33-liter non-returnable glass bottles. Components of the filling line: New glass lifters | Hormes • Pallet size: Suitable for new glass pallets measuring 1000 mm x 1200 mm • Drive: Electrically operated chain hoist for efficient lifting operations • Truss length: approx. 4,500 mm Fully Automatic Rinser | Hormes • Capacity: Up to 15,000 bottles per hour • Nozzles: At least 36 spray nozzles, matched to a specific bottle size • Cleaning: Cleaning the inside of the bottles with fresh water, spraying time approx. 1.5 sec., draining time approx. 5 sec. Automatic Bottle Fi ...

Scope of delivery: -Valve manifold -Vacuum unit -Hygienic enema -Fill level and closure inspection -Rejection and rejection belt -Technical documentation -Program backup -Extensive carriers available that can be purchased additionally Information without guarantee

with 63 filling valves and 16 head crown corker 26 mm with double pre-evacuation system Work direction: from right to left Product: beer and other products with CO2 Capacity: approx. 25.000 bph - by 500 ml bottles approx. 30.000 bph - by 350 ml bottles More technical details you can see on the technical data sheet. Complete documentation, manual, spare part list, electrical documentation are available. The filler was in production in a Germany brewery and can be inspected on side.

KHS Aseptic PET filling line - approx. 15,000 bph based on 0.5 ltr. PET bottles Filling product: Juice and tea Bottle size: 500 ml PET bottles Closure type: PCO 28 - 1810 The aseptic system is a wet aseptic system Year of manufacturing: 2009 consisting of: SIG Blowing Machine Preform feeding System Air conveyor system KHS Aseptic filler and capper Cap sterilization and feeding Unit Bottle conveyor cystem Plate UHT sterilizer Shrink wrap packaging machine Not included in the line is the blending and CIP units. The line is still installed and can be inspected in full operation until 1st of May 2025.

A palletizing robot from the manufacturer KHS is being sold. The palletizer was built in 2005, but was comprehensively brought up to technical standards in 2021 in terms of safety technology, etc. The following system components are part of the palletizing robot: 1 Palettentransnort.in of the KHS EW machine 1 palletizing robot 1 pre-collection with gap dividers 1 KHS container conveyor system with loader with rotating device (gentle on the product) Portrait Magazine, Kettner Available now. If you are interested, please inquire.

KHS can filler, Innofill, 50 filling valves, standard can 500 ml, Sleek can 330 ml, can lid 202, with Ferrum seamer F8, year of manufacture: 2008, with can lid magazine KHS Can Filler Filling Canning, Innofill, 50 Filling valves, Standard Can 500ml / 0.5liter, 50cl, Sleek Can 330ml / 0.33l, 33cl, Can end lid 202, with Ferrum can seamer F8, year: 2008, with can end lid magazine

Measure filler KHS-Seitz Compakta with 12 filling valves capacity: up to 2.500 bph by 1,0 ltr.

Carbonator KHS Process Technik CX 30 upgraded by KHS 2014 Processing carbonated mineral water at max 8 g/litre Capacity 30.000 litres per hour Equipment complete with pumps, tank, flowmeter and all its accessories Drive Siemens S7 Equipment in perfect working condition Was in production till March 2025 Still installed, will be dismantled Available immediately

Output: 15000 U/h // Bottle Size: 1500 ML

The glass depalletizer was manufactured in 2005 by the German company KHS and until recently was part of a filling line at a German dairy company. The depalletizer is now released as the owner shuts down production. Technical details/ scope Depalletizer with stroke and outlet at the bottom With intermediate layer remover and magzine With slide for top layer/lid Enclosed conveyors can peel off in a single lane for molded bottles Incl. protective grille, pallet transport, run-out table In 2021, the system received a complete retrofit in terms of control and safety technology. Available now.

The glass depalletizer was manufactured in 2005 by the German company KHS and until recently was part of a filling line at a German dairy company. The depalletizer is now released as the owner shuts down production. Technical details/ scope Depalletizer with stroke and outlet at the bottom With intermediate layer remover and magzine With slide for top layer/lid Enclosed conveyors can peel off in a single lane for molded bottles Incl. protective grille, pallet transport, run-out table In 2021, the system received a complete retrofit in terms of control and safety technology. Available now.

The palletizer was manufactured in 2005 by the German company KHS and until recently was part of a filling line at a German dairy company. The palletizer is now released as the owner stops production. In 2021, the system received a comprehensive retrofit in terms of control and safety technology. Technical details/ scope Works with trays/cartons of 8 (4x2) Pallet loaders With blind head Incl. protective grille, Pallet transport, tray transport, tray turner, formation table, intermediate layer insert, intermediate layer magazine, empty pallet magazine Available now.

The palletizer was manufactured in 2005 by the German company KHS and until recently was part of a filling line at a German dairy company. The palletizer is now released as the owner stops production. In 2021, the system received a comprehensive retrofit in terms of control and safety technology. Technical details/ scope Works with trays/cartons of 8 (4x2) Pallet loaders With blind head Incl. protective grille, Pallet transport, tray transport, tray turner, formation table, intermediate layer insert, intermediate layer magazine, empty pallet magazine Available now.

The system consists of a KHS INNOPAL RK6-350 palletizer from 2004, a KUKA KR 360/1 industrial robot and a Siemens Simatic S7 automation controller. The system is suitable for the automatic palletizing of cartons, bottles or PET-packaged products.

This complete KHS Krones aseptic line from 2005 is specially designed for safe and Hygienic filling of beverages into PET bottles. It offers a fully aseptic process that is suitable for ensures maximum product safety and extended shelf life. The system is suitable for both still and carbonated soft drinks. carbonated soft drinks, with a capacity of 30,000 bph for 0.5l bottles. It supports flat caps with a size of 28 mm (PCO1810) and 38 mm DS 38/15 2T SFB CA (3504). It also allows the use of sleeve labels. The combination of cutting-edge technology and precise control makes this line the ideal choice for manufacturers who value quality and efficiency.

KHS Innofill DRS 168/24 with 168 filling valves an 24 head crown corker capacity: up to 72.000 bph year of manufacturing: 2014 pitch: 94 mm with HDE high pressure injection with shower for broken glass fixed for 0,33 and 0,5 ltr. bottles already dismantled and available in Germany

The complete PET filling line is designed for the production of still water and covers the entire process from preform feeding to the palletized end product. The line includes preform feeding, PET bottle blow molding, bottle washing and gravity filling, capping with pre-turned plastic closures, labeling, bottle inspection, conveying, shrink wrapping, palletizing and stretch film wrapping. All machines are integrated to ensure stable operation, high efficiency and consistent performance at a rated speed of up to 43,000 bottles per hour.

Fully automatic and integrated PET still water filling line, designed to perform preform handling, bottle blowing, filling, capping, labeling, inspection, secondary packaging, palletizing and pallet stretch wrapping in a synchronized production process.

Fully automatic and integrated PET filling line for still water, designed for blowing, filling, sealing, labeling, inspection, secondary packaging, palletizing and pallet wrapping in a synchronized production process. Specifications Manufacturer: KHS Model Filling Line PET 54,000 BPH Year 2016 Condition Used Stock number 103813 Production of still water Capacity 54,000 BPH Blowing, Filling & Capping Block KHS INNOPET BLOWFILL MONOBLOCK Roll-fed PE modules labeling machine, labeling stations: 2 Bottle inspection system Bottle inspector KHS Innopack Kisters SP shrink packer KHS palletizing system, double robot arm Pallet wrapping KHS, rotating arm

Fully automatic and integrated PET still water filling line, designed to perform preform handling, bottle blowing, filling, capping, labeling, inspection, secondary packaging, palletizing and pallet stretch wrapping in a synchronized production process.

Fully automatic and integrated PET filling line for still water, designed for blowing, filling, sealing, labeling, inspection, secondary packaging, palletizing and pallet wrapping in a synchronized production process. Specifications Manufacturer: KHS Model Filling Line PET 54,000 BPH Year 2014 Condition Used Stock number 103814 Production of still water Capacity 54,000 BPH KHS InnoPET BloFill blowing, filling and closing block Blow molding machine KHS Blowmax 24S AF CE46B Compressor System Inspection Systems PRESSCO Series V FHCP3X Labeller Simpl-Cut Flex 1420-45-bl , 2021 Shrink packer KHS Innopack Kisters TSP KHS Innpal PBL 1 N (H) RG 1 palletizing system Lantech SLC-AUTO pallet wrapping, 2015

Fully automated PET still water filling line designed for efficient bottle blowing, filling, capping, labeling, inspection, secondary packaging and palletizing in a synchronized production process. Manufacturer: KHS Model Filling Line Pet 32,000 BPH Year 2009 Condition Used Stock number 103812 Production of still water Capacity 32,000 BPH PET blow molder KHS Blowmax 16S Series IV Filling monoblock KHS, Mechanical filling valves: 50 Labeling Machine PE,Roll Feeding Stations: 1 Bottle inspection system Bottle inspector Palletizer Alvey 881 Lantech pallet wrapper, Model: S1500

This sterile tank manufactured by KHS is designed for the safe intermediate storage of beverages in aseptic production processes. The tank originates from an industrial beverage processing line and meets high hygienic and technical standards required in the food and beverage industry. Technical Specifications: Manufacturer: KHS Type: Aseptic Buffer Tank Year of Manufacture: 2007 Storage Medium: Beverages Capacity: approx. 18,000 liters Max pressure: 7 bar Minimum pressure: -1 bar Overpressure: 10.5 bar Temperature range: 20-130 degrees centigrade Material in touch with product: stainless steel 306 Design: Aseptic, food-grade, high-acid compatible Key Features & Benefits: Suitable for aseptic beverage processing High product safety and hygiene standards Robust and durable industrial design Ideal as a buffer or intermediate tank in filling and processing line ...

Krones Wet Aseptic PET Bottle Filling Line – 36,000 bph (500 ml) The Krones wet aseptic filling line is designed for the production of carbonated and still beverages, including soft drinks and juices, using a wet aseptic process. The line supports flexible bottle formats of 0.33 L, 0.5 L, 1.0 L, and 1.5 L, with a maximum output of 36,000 bottles per hour at the 0.5 L format. The system is compatible with 28 mm closures, including PCO 1810 flat caps and sport caps, ensuring high hygiene standards and reliable, high-quality filling performance. The line is complete and was originally installed by Krones in 2009. In 2016, the line was upgraded with a KHS Blowmax stretch blow molder and a Krones Modulpal palletizer. The line has been continuously serviced by Krones and is currently in very good condition. Main Characteristics: Manufacturer Krones AG and KHS Manufacturing yea ...

Used KHS bottle filling line with crown capper - overhauled by HORMES - Filling rotary - Bottle cap bunker - Feeding of the crown caps by magnetic tapes - Conveyor belts The plant has been completely overhauled by HORMES and is currently out of operation. Viewing possible. We will be happy to send you further information on request.

Used Used Complete Bottling Line KHS PET 54.000 bph: Year: 2014 Condition: Good Used Complete Bottling Line KHS PET: Product: Still water Speed: 54.000 BPH Year: 2014 Hopper Preform Preform Elevator Preform Orientator KHS InnoPET BloFill Blower PET: Model: Blowmax 24S 24 cavities Compressor AF: Model: CE46B Microfiltration system Filler: 72 mechanical valves Type of filling: Capper: Number of heads: Type of workable cap: Pre-threaded plastic Distribution system: pick & place Gebo Cap Elevator Model: CF 2024 Caps Orientator Inspector PRESSCO Model: Series V FHCP3X Conveyor belts Labeller PE: Model: Simpl-Cut Flex 1420-45-bl Year: 2021 Roll Fed Station Bottle Inspector Shrink Wrapper KHS Model: Innopack Kisters TSP Version: film launch 6 lanes Bundle 6?4 Type: Only film Palletizer KHS Model: Innpal PBL 1 N (H) RG 1 Type: clamps Interlayer system Storage pallet Storage layer Pallet wrapper  ...

Used Used Complete Bottling Line KHS PET 54.000 bph: Year: 2016 Condition: Good Used Complete Bottling Line KHS PET: Product: Still Water Speed: 54.000 BPH Year: 2016 KHS INNOPET BLOWFILL MONOBLOCK Hopper Preform Preform Elevator Preform Orientator Blow molding machine PET: Chiller Labeling Machine 2 stations with roll fed PE modules Direction of rotation: counterclockwise Electronic cam plates Filler Capper Type of workable cap: pre-threaded plastic Distribution system: pick & place Caps elevator Caps Orientator Bottle inspector Shrink Wrapper KHS Model: Innopack Kisters SP Version: film launch 6 Lanes Bundle 6?4 Only film Palletizer KHS Dual Robotic Arm Clamp, lifting Pallet storage Interlayter system Pallet Wrapper KHS Rotating arm Pre-stretch Code: NP 696 More details: https://bottlingscout.com

Used Used Complete Bottling Line KHS 43.000 bph: Year: 2008 Condition: Good Used Complete Bottling Line KHS: Product: Still Water Speed: 43.000 BPH Year: 2008 Cap Corvaglia 29/26 Tanner Preform Hopper Preform Elevator Preform Orientator Blower PET: Model: Blowmax 24 Compressor AF Chiller Riedel CIP KHS Filling Monoblock KHS Innofill-NV PET Filler: 60 valves ? mechanical Type of filling: gravity Capper (including elevator and cap orientator) Type of workable cap: Pre-threaded plastic Cap size: Corvaglia 29/06 Distribution system: pick & place Labelelr PE Year: 2021 Model: Simple cut flex CI 1120 30 Direction of rotation: counterclockwise 30 Electronic cam plates roll feed station Ispettore bottiglie Conveyor belts Shrink Wrapper Douglas Year: 2007 Model: m-75 Version: film launch Palletizer Alvey 880 Year: 1999 Type: Push System Pallet Storage Pallet Wrapper Lantech Model: S1500 Type of w ...

Used Used Complete Bottling Line KHS 32.000 bph: Year: 2009 Condition: Good Used Complete Bottling Line KHS: Product: Still Water Speed: 32.000 BPH Year: 2009 Cap Corvaglia 29/26 Hopper Preform Preform Elevator Preform Orientator Blower PET KHS Model: Blowmax 16S Series IV Compressor Chiller Filling Monoblock: Filler 50 mechanical valves Type of filling: gravity Capper including elevator and orientator Type of workable cap: pre-threaded plastic Cap size: Corvaglia 29/26 Distribution system: pick & place Labeller PE 1 roll fed station Mechanical cam plates Bottle inspector Shrink Wrapper Version: film launch Bundle 6?4 Palletizer Alvey 881 Type: push system Pallet Storage Pallet Wrapper Lantech Model: S1500 Type of wrapping: Rotating arm Pre-stretch Code: NP 695 More details: https://bottlingscout.com

Used Used 2009 Complete Bottling Line PET KHS 72.000 bph: Year: 2009 Condition: Good Used 2009 Complete Bottling Line PET KHS: Product: Still Water Speed: 72.000 BPH on 0.5 l Year: 2009 Cap Corvaglia 29/26 Tanner Preform Hopper Triblock KHS Preform Elevator Preform Orientator Blower PET: Model: Blowmax 36S Series IV Compressor AF Chiller Riedel CIP KHS Filler: 100 valves ? mechanical Type of filling: Gravity Capper (including elevator and cap orientator) Type of workable cap: Pre-threaded plastic Cap size: Corvaglia 29/06 Distribution system: pick & place Labeller PE Model: Simple cut KS177 Direction of rotation: counterclockwise Electronic cam plates stazione roll feed Bottle inspector Presco Model: intellispec Conveyor belts KHS Shrink Wrapper KHS Model: Innopack Kisters TSP Version: film launch Palletizer Alvey 942 Type: push Pallet storage Pallet wrapper Lantech Model: S1500 Type of  ...

Used Used 2019 Complete PET Line KHS 70.000 bph: Year: 2019 Condition: Good Product: Still water Speed: 70.000 BPH Year: 2019 Hopper Preform M. Tanner Preform Elevator Preform Orientator Compressor KHS InnoPET TriBlock Blower PET Labeller: Electronic cam plates 2 Stations Wrap-around roll fed Filler: 96 mechanical valves Capper (including elevator and cap orientator) Type of workable cap: pre-threaded plastic Distribution system: pick & place Bottle inspector Shrink wrapper KHS Modello: nopack Kisters TSP Versione: a lancio di film Palletizer FKI Logistek Model: A-910 Type: Push Pallet Storage Interlayer system Pallet wrapper Lantech Type of wrapping: Rotating arm Pre-stretch Code: NP 692 More details: https://bottlingscout.com

Used Used Complete Canning Line KHS 25.000 cph: Year: 2017 Condition: Good Used Complete Canning Line KHS 25.000 cph: Capacity: 25.000 cph Products: beer and carbonated soft drinks Format: 500ml; 211/202 Yom: 2012, 2017 Current condition: still installed ? power on the machine. Can be inspected in dry cycle. Available for dismantling: november 2025. The cans will be packed in tray with foil. Composed of: Bulk can depalletizer: linker dpg-500, yom: 2012 Canceck: transtechhysek, yom: 2012 Can conveyor: linker conveyor rc/khs, yom: 2012 Rinser: linker triplex rinser tr/khs, yom: 2012 Flush pasteurizer: khs innopro 140/14/85, yom: 2012 Filler: khs innofill can dvd, yom: 2017 Seamer: ferrum f08, yom: 2012 Lid feeder: nsm lidservera30, yom: 2017 Conveyor: khs innoline btr, yom: 2012 Filling height control: khs innocheck cub, yom: 2012 Blowing: europool Packing machine: khs kisters sp0502, yom: ...

Used Used Complete Bottling Line for Wine 12.000 bph: Year: 2001 Condition: Good Used Complete Bottling Line for Wine 12.000 bph: Speed: 12.000 BPH with bottles of 0.75 L Depalletizer Keber: Model: Depack 92 Year: 2001 Speed: 65 layers/hour Pallet Storage Inter-layer system Dimension pallet 1000 mm x 1200 mm x 1400 mm Maximum height for pallet 2300 mm Microfiltration Pall: Model: Saso64gnw80j-it Year: 1998 Triblock KHS Model: Innofill um Clockwise directions Speed: up to 33.000 BPH Triblock composed of Rinser 100 clamps Automatic adjustment height Fix nozzles Double treatment Water and Nitrogen Filler 100 valves by gravity Automatic adjustment height tank Mechanicals valves Pre-evacuation Capper 20 heads for natural straight corks Dimension of corks: 25 mm ? x 48 mm H Vacuum before capping Inert gas injection system before capping Stelvin capper 15 heads Nr. 2 pneumatic cap elevators 3 I ...

Complete Glass Bottling Line for Hot Fill & Cold Fill (Krones / KHS) - Capacity: up to 33,000 bottles/hour (500 ml glass bottles) - YOM: 1999-2007 - many upgrades, see below! The system offers maximum flexibility, allowing hot fill, cold fill, still and carbonated beverages, and multiple bottle sizes. Important: The filler can also be used for PET bottles, offering additional production flexibility. Key Technical Data - Bottle Types - Glass bottles (non-returnable) - PET bottles can also be filled Bottle Sizes - 250 ml – 1000 ml Products - Fruit juices (orange, apple, tomato, etc.) - Hot fill beverages - Cold fill beverages - Carbonated soft drinks (CSD) Capping Types - 28 mm aluminium cap - 33 mm aluminium twist-off cap - 43 mm aluminium twist-off cap - (Twist-off capping machine included) Labelling Options - Paper labels with cold glue - Optional ...

Component Manufacturer / Model Year Capacity / Notes Condition Depalletiser "KETTNER PRESS UNI ABSCH Komm.Nr. 96/0143/037" — Can depalletising — start of line Good — annual overhaul Rinser (water / ClO₂) MEYER Typ: Hyet 2020 25,000 c/h Good — annual overhaul Filler — Isobaric CO₂ "KHS Inofill CAN DVD 50 (0.5L, 0.33L, Pint)" 2020 "25,000 c/h CO₂ atmosphere, foaming device, buffer tank" Very Good — 2020, annual overhaul Seamer FERRUM F 08 2020 25,000 c/h Very Good — 2020, annual overhaul Full Can Inspector "HEUFT SPECTRUM VX TI 36 Level control" 2020 "25,000 c/h Full level + quality inspection" Very Good — 2020, annual overhaul Tunnel Pasteuriser "NIKO Typ: 095.31.152.100.1 Nr. 41540/96" — Post-fill pasteurisation Good — annual overhaul Can Packer Included in line 2021 Multi-pack formation Good — annual overhaul Palletiser Included in line 2021 End ...

Overview  The palletizer was manufactured by the German company KHS in 2005 and was until recently part of a bottling line in German dairy company. The palletizer is now being released as the owner is sgutting down the production. Technical details/ scope Worked with tray/cartons of 8 units (4x2) Pallet loader With shutter head Incl. protective fences, pallet transport, tray transport, tray turner, formation table, empty pallet magazine

Overview This high-performance can filling line was manufactured in 2013 by KHS and is designed for large-scale beverage production, particularly beer in aluminum cans. With a capacity of up to 48,000 cans per hour (500 ml), the line represents a modern, high-speed solution including depalletizing, filling, seaming, pasteurization, inspection, packaging, and palletizing. The core of the line consists of a KHS Innofill DVD 92 volumetric filler combined with a Ferrum F708G high-performance seamer, ensuring precise filling and reliable closing at maximum output rates. The line has been well maintained and remained in production until February 2026, and is available from Q1 2026. The overall installation features a compact, high-density layout with advanced conveyor and process integration, typical for modern KHS canning lines. Technical Data Capacity: 48,000 cans per hour (500 ml) 41,000 ca ...

- , , This PET single-use filling line is designed for bottle sizes of 0.5 L, 1.0 L, and 1.5 L and achieves a nominal output of up to 24,000 bottles per hour (for 1.0 L bottles). New bottles are destacked pallet by pallet on the new bottle unstacker and transported pneumatically to the rinser. The system consists of high-quality components from renowned manufacturers and includes: • - (KHS, 2001) • (KHS, 2001) • (Ortmann & Herbst, 1978) with downstream Velcorin dosing • - / , / (KHS, 2001) with chlorine dioxide and sterile water rinsing • -- (KHS, 2001) with Alcoa screw capper and liquid nitrogen dosing • (miho, 1992) • (KHS, 2001) • - (KHS, 2003) with hot melt glue applicator and best-before date printer This filling line is ideal for beverage manufacturers who want to fill water, soft drinks, or fruit spritzers in disposable PET bottle ...

Combined rinser and filler for 0.5 litre, 1.0 litre and 1.5 litre PET bottles. Output: 24,000 bottles/h A chlorine dioxide dosing unit and a sterile water supply are connected to the rinser. The filler is equipped with a screw capper. The filling quantity is controlled via flow measurement. Liquid nitrogen dosing is possible via a mobile system., Additional title: PET bottle sanitising and filling system, Capacity: 24000 b/h , Formats: 0,5 l, 1,0 l und 1,5 l PET-bottles, Running direction: left -> right, Operation / Control: Touch-Panel / Simatic S 7, Material: mainly stainless steel, Position: free standing, Features: Stainless steel enclosure, plexiglass protective screen opening upwards; 70 rinsing valves on the rinser; 80 filling valves; filling quantity recording via IDM; Alcoa capper 28 mm Bericap; Prominent chlorine dioxide dosing; filtration system for sterile water, mobile liqui ...

Packer for 0.5 litre, 1.0 litre and 1.5 litre PET bottles. Bottle holders: 5x20, 7x9 or 10x6 bottles., Additional title: Packing machine for bottle crates, Output according to design: 4000 crates/h, Current output approx.: 3000 crates/h , Air consumption: 0 Nm³/1000 bottles, Current: 17,59 A, Voltage: 220/400 V, Frequency: 50 Hz, Compressed air: 4 - 5 bar, Length: 3680 mm, Width: 2940 mm, Height: 2610 mm, Weight: 4200 kg, Formats: 0,5 l, 1,0 l und 1,5 l PET-bottles, Running direction: left -> right, Operation / Control: converted to manual / PLC defective, Material: stainless steel / painted black steel, Position: free standing, Base construction: rectangular cycle packer machine on four columns with spherical feet, Features: Plexiglas safety screen opening upwards, safety grid, infeed and outfeed conveyors, packing head equipment for 0.5 l, 1.0 l and 1.5 l bottles, control panel conver ...

Crate washer for PETCYCLE plastic crates, Additional title: Crate cleaning system, Capacity: 2950 crates/h, Power: 18 kW, Current: 38 A, Voltage: 230/400 V, Frequency: 50 Hz, Length: 7300 mm, Width: 1570 mm, Height: 1710 mm, Weight: 1900 kg, Formats: plastic crate: 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l, 6 x 1,5 l , Running direction: transverse, Material: stainless steel, Position: free standing, Base construction: Self-supporting machine housing in block construction on spherical feet, Features: Caustic, hot water and fresh water spraying, inspection window, platform with staircase and railing, crate turner,