hymmen lacquer machines used for sale

Working width: 1400 mm Technical description: Operating side: right Working height: 900 mm, adjustable: +/-50 mm Width: 1400 mm EFF. Usable width: width 100 mm Clearance height: 120 mm Feed transport: 8.0 25.0 m / min frequency controlled Levelling roller: 0.7 5.7 m / min frequency controlled Material work piece: wood, wood, rigid Dimensions (min.) Thickness width length: 5 50 300mm Dimensions (max.) Thickness width length 80 1300 2000mm Tolerance max. Roller width +/-0, 2 mm Material coating: UV curable coatings and flowing coats Processing temperature: 18 ° c. Viscosity: up to 140 DIN sec, Ford 4 cups Drive type: Three-phase frequency inverter Power consumption: CA. 1,5 kW Mains voltage: 400 V / 50 Hz with power N-conductor Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar, min. 5 bar max. 8 bar Weight: 1.300 kg

Working height 900mm Nominal width 1300mm Effective working width 1270mm Rolling pressure force max 40kN Passage height max 120mm Feed transport 6-50 m/min stepless/frequency controlled Plate width min 200mm Plate length min 1000mm Plate thickness min 3mm Power supply 2,2kW Drive power height adjustment 0,55 kW With single tempering device STW 180/1-18-30-N1.1

Working height 900mm Nominal width 1400mm Effective working width 1370mm Rolling pressure force max 5kN Passage height max 120mm Feed transport 6-50 m/min stepless/frequency controlled Plate width min 200mm Plate length min 350mm Panel thickness min 3mm Glue hot melt PUR Application rate 40-80g/m Driving power 6kW Tempering device 24kW

Paint shop with UV dryer flow. Year of construction 007/00 Sale on behalf of customers, further data on request

Manufacturer: Hymmen Ersatzwalze 1400 mm Muss gummiert werden, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Stahlkerndurchmesser ca. mm: ca 200, Rubber coating defective: yes, Can be reground: no,

Manufacturer: Hymmen UV Trockner, Type: UVK, Year: 2004, Work piece width min-max mm: 1300, Number of lamps: 3, kW power 1 lamp: ca.10, Lampen gerade eingebaut: yes, Adjustable: yes, Power per lamp watt UV: 80, Conveyor lenght mm: 3450, Outer belt width mm: 1800, Working hight approx mm: 60, Feeding speed m/min: 5-25, Conveyor: Band, Drive power kW: 1,5, Year :2004

Manufacturer: Hymmen, Type: SGC, Year: 1999, Control: Hymmen, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-120, Operating side: rechts, Vorschub Transport m/min min - max: 5-25, kW - Leistung Transport: 0,75, Glättewalze mm: yes, Glättewalzengeschwindigkeit: 5-25, Year :1999

Manufacturer: Hymmen, Type: TLX 2,0, Year: 1982, Control: hand, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1300, Working height: 950, regelbarer Direktantrieb für Auftragswalze: yes, Auftragswalzengeschwindigkeit m/min.: 10-25, Gummierte Auftragswalze mm: yes, Gummiqualität : 50, Direktantrieb Dosierwalze: yes, Verchromte Dosierwalze mm: yes, Metering roller drive m/min: ca.4-12, rbakel: yes, Compressed air bar: 6, FREE TEXT: ohne Schaltschrank, Year :1982

Manufacturer: Hymmen Lackuftragswalze 1400 mm Stahlkern 210 mm Aussendurchmesser 236, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Shore Härte: 40, Approx. thickness of rubber coating in mm: ca.30,

Manufacturer: Hymmen, Type: TLX M, Year: 1992, Work piece width min-max mm: 1300, Working widht max mm: 1300, Operating side: links, Working height: ca 980, UV-laquer roller: yes, Verchromte Dosierwalze mm: yes, Glättwalzengeschwindigkeit ca. m/min.: 80, Steuerung Nicht-Ex : 5 - 25, Widht of roller coater: yes, Application roller drive m/min: yes, Widht of metering roller: Band, Year :1992

Manufacturer: Hymmen Glättewalze, Type: SGC, Year: 1995, Control: Hymmen, Work piece width min-max mm: 1.350, Min.-max. workpiece height in mm: 3 - 80, Working height: links, Lackauftragseinheiten: ca. 980, Year :1995

Manufacturer: Hymmen Lackwalze ELX 1.0 Bedienseite links, Type: ELX 1,0, Year: 1995, Work piece width min-max mm: 1350, Min.-max. workpiece height in mm: 3 - 80, Working height: rechts, Lackauftragseinheiten: ca 980, Vorschub Transport m/min min - max: yes, Year :1995

Manufacturer: Hymmen, Type: TLX, Year: ca. 1990, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: rechts, Working height: 980, UV-laquer roller: yes, Verchromte Dosierwalze mm: yes, Glättwalzengeschwindigkeit ca. m/min.: 80, Steuerung Nicht-Ex : 5 - 25, Widht of roller coater: yes, Application roller drive m/min: yes, Widht of metering roller: Band, Through running hight mm: Maschine wird gereinigt, geprüft und neu lackiert, Year :ca. 1990

Manufacturer: Hymmen, Type: TLX 1,0, Year: 1982, Control: hand, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1300, Working height: 950, regelbarer Direktantrieb für Auftragswalze: yes, Auftragswalzengeschwindigkeit m/min.: 10-25, Gummierte Auftragswalze mm: yes, Gummiqualität : 50, Direktantrieb Dosierwalze: yes, Verchromte Dosierwalze mm: yes, Year :1982

Ersatzwalze für: TLX, Hymmen: yes, Gummiert Walze: yes, Gummierte Länge cm: 1400, shore Härte: ca.35, Stärke Gummierung ca. mm: 20, Stahkerndurchmesser ca. mm: 215, EPDM: schwarz,

Spare roller: ELX und TLX, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Shore Härte: ca.40, Approx. thickness of rubber coating in mm: 20 Schwarz, Stahlkerndurchmesser ca. mm: 215, Wedge follower: yes, Gummiqualität : neu,

Manufacturer: Hymmen Stahldosierwalze Chromwalze 1400 mm 197 Durchmesser, Hymmen: yes, Roller rubber coating: Chrom, Approx. thickness of rubber coating in mm: Stahl 1400 mm, Stahlkerndurchmesser ca. mm: 197,

Manufacturer: Hymmen Lackwalze für TLX Länge mm 1400 shore 60 Walze muss geschliffen werden, Spare roller: TLX, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Shore Härte: 60, Approx. thickness of rubber coating in mm: 10, Stahlkerndurchmesser ca. mm: 215, Wedge follower: yes, Rubber coating defective: yes,

Manufacturer: Hymmen Lackauftagswalze, Bürkle: yes, Rubber coating length cm: 1398, Shore Härte: 45, Approx. thickness of rubber coating in mm: 20, Sponge rubber: yes,

Manufacturer: Hymmen, Type: TLX - M, Year: 1989, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1989

Manufacturer: Hymmen, Type: TLX-M1, Year: 1993, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1993

Manufacturer: Hymmen, Type: TLX - M, Year: 1993, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1993

Manufacturer: Hymmen, Type: TLX - M1.0, Year: 1989, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1989

Manufacturer: Hymmen, Type: TLX M, Year: 1990, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: rechts, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1990

Manufacturer: Hymmen, Type: TLX M2, Year: 1990, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1990

Manufacturer: Hymmen, Type: TLX-M, Year: 1991, Control: yes, Operating side: rechts, Arbeitshöhe: 850, Stain roller: yes, UV-laquer roller: yes, Widht of roller coater: 1350, Widht of metering roller: yes, Attachment bracket roller: yes, Reverseantrieb: yes, Rakeleinrichtung: yes, Werkstückdicke max mm: 80, Work piece length min mm: 250, Feeding speed min/max: 6 - 40, Roller lift out: yes, Hight adjustment by engine: yes, Transportart: Band, Pump system: yes, Compressed air bar: 6, Wight approx. kg: 2000, Required space L x W x H mm: 940 x 2350 x 1600, Year :1991

Hymmen glue application machine 4 Roller Glue Dispensing Machine Type LA 4W Working width 1300 mm 2 rubberized fluted rollers The rubber lining/fluting is in poor condition See pictures 2 rubberized smooth rollers Ribbed rollers diameter 230 mm Smooth rollers diameter 180 mm Maximum passage height 100 mm Application speed 10 and 20 m/min. Motor power 1.1 kW Emergency out of leverage Dimensions 1950 mm x 1100 mm x H 1150 mm Weight with pallet 1300 kg Machine is function-tested Sale in actual condition

A complete Hymmen laminating line for the woodworking industry is available. Main components: Transport modules (stacking roller conveyors, lifting units, gantries and platforms), surface cleaning machines, roller glue application machines, various calenders, cutting stations, press roller, film unwinding station, sawing machine, X-ray sensor system and a stack turner for double-sided coating. Nominal width: 2200mm, product width: 2200mm, line working height range: 1170mm-1270mm, line speed: 10m-30m/min, max. product speed: 25m/min, passage height: 80mm, min. panel length: 1300mm, min. panel width: 1200mm, product material: sandwich material, tolerance: +/-3mm, total line space requirement: 2 halls (590m²/347m²). Documentation available. On-site inspection is possible. This is a complete production line with peripheral equipment, pre- and post-processing stations and conveyor belts in  ...

This HYMMEN TLA was manufactured in 2002. It features a glue spreader with 4 rollers and a working width of 1400 mm. Consider the opportunity to buy this HYMMEN TLA glue spreader. Contact us for more information.

Manufacturer: Meinert Arbeitsplattenlage, Year: 1995, Control: Ferrocontrol, Storage program: yes, Lagerabmessung Meter: ca.35 X 6, Plattenstärken min-max mm: 10-55, Plattenlängen min-max mm: 2070, Plattenbreite min-max mm: 1200, Beschichtet Platten: yes, Dünnplatten bis mm: no, Einlagerplätze: 1, Auslagerplätze: 1, Min-max stack dimensions length: ca.4500 X 1400, Transport roller conveyor: 1, Span length mm: 6000, Fahrträgerhöhe mm: 3800, Drehvorrichtung Hubsytem : yes, Hight of stacks max mm: 1400, Weight measurement: 150, Feeding speed max m/min: yes, Feeding speed continous adjustable: yes, Year :1995

Manufacturer: 3 Lampen Purete UV-Trockner PRT-U3106e 120 Watt elektronische Leistungregelung 620 mm, Type: PRT-U3106e , Year: NEU, Work piece width min-max mm: 620, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2-80, Number of lamps: 1, kW power 1 lamp: 8,4, Lampenlänge mm: 700, Reflektor von oben abnehmbar: zur Bedienseite, Gesamtlänge UV Modul mm: 2.300, Lamps straight installation: yes, Strahlereinheit UVM: yes, Adjustable: yes, Elektronische Leistungregelung: yes, Automatische Werkstückerkennung : yes, Automatischer Hochlauf der Lampe bei Einlauf Werkstück: yes, Position of lamps: gerade, Abluftmenge cbm/h: 1200, Leistung Abluftventilator kw: 0,5, Working widht mm: 25, Conveyor lenght mm: 38, Outer belt width mm: 38, Working hight approx mm: 1.150, Conveyor: 5 - 25, Drive power kW: Stange, Working widht mm: 200, Weight approx. kg: 2.300 X 1.150 X 1.750, ...

Wood production line manufactured in 2020. This HYMMEN JUPITER JPT C 680/548 mit OFS 850 features a maximum printing width of 548 mm, with a system speed ranging from 8 to 65 m/min. It is designed for high-speed surface finishing of large panels, ideal for the flooring and furniture industries. If you are looking to get high-quality printing capabilities, consider the HYMMEN JUPITER JPT C 680/548 mit OFS 850 machine we have for sale. Contact us for further details.

Guillotine for cutting veneer Kuper Hymmen AS 220 Cutting width: 2200 mm Cutting depth 1020mm Electronic Cut Stop Pass Knife actuation: two-handed control for safety Security Gateway 4kw guillotine motor 1.5kw Pressure Motor Net price

Guillotine for cutting veneer Kuper Hymmen AS 220 Cutting width: 2200 mm Cutting depth 1020mm Electronic Cut Stop Pass Knife actuation: two-handed control for safety Security Gateway 4kw guillotine motor 1.5kw Pressure Motor Net price

Guillotine for cutting veneer Kuper Hymmen AS 220 Cutting width: 2200 mm Cutting depth 1020mm Electronic Cut Stop Pass Knife actuation: two-handed control for safety Security Gateway 4kw guillotine motor 1.5kw Pressure Motor Net price

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250

BACCI multiple oscillating mortiser mod. MX90 - 5+5 horizontal spindles - 2+2 vertical spindles - Selectable spindle revolutions motor per motor. . laps 1' 6000/12000 - Max. slot inclination 20° - Tilt to and from the outside – standard -7° + 30° - Max. distance between spindles 1280 mm - Matr. 228 - CE standards - Year 1999 - Complete with manual and CE declaration

CAMAM oscillating mortiser with 2 benches mod. MO/2A - 4 spindles -Volt. 380/50 - Matr. 145

Oscillating mortiser with 2 benches BALESTRINI mod. 2CAP

WEIBERT WJ-K315R Circular sawing machines Formatschiebetisch: 2700mm Engine power: 4 KW (5.5 HP), 400V, n = 4000 min Cutting height: 103 mm Blade: 250-315 mm swivel: 90 °-45 ° Before scoring unit: With motor WJ-S315R-4KW 2.7 SPECIAL PRICE

Edge grinding with oscillation and veneer sanding WEIBERT new WJ-KS30 400V 3 KW (4 HP) n = 2840 RPM Work table 960 x 350 mm Table height 230 mm Belt rear 1050 x 200 mm Belt speed 20 m / sec Oscillation stroke 20 mm Oscillation motor 0.25 KW (0.34 PS) A/can be switched off Machine table and guides made of grey cast iron Quick adjustment of tilting 90 °-45 ° with degree display Weight 400 kg Dust nozzle 120 mm Rollers pull-out extension table Band width 150 mm WJ-R00200 option: Band width 200 mm WJ R00300

Weibert FS 41 Planer - Thicknesser Planing width: 410 mm Drum: 4 turn blade shaft Motor power: 4KW n = 4500U/min, 400V Clearance height: 4-225 mm Westcott Chuck 0-16 mm Professional side the set stop WJ-300200 Special price: NET 2555,32,-

Type 300C Surface planer: Table dimensions 300?1500 mm Cutterblock diameter 70 mm Cutterhead rotating speed 5700 rpm 3 knives 300x20x3 mm Max table adjustment 4 mm Thickness: Table dimensions 300x660 mm Max cutting depth 4 mm Feed speed 7 m/min Cutterblock rotation speed 5700 rpm Max working height 220 mm Min working height 4 mm Mortising: Table dimensions 250?500 mm Longitudinal stroke 205 mm Trasversal stroke 95 mm Chuck (SX) 16 mm Chuck rotation speed 5700 rpm Motor 2,2 kW Accessories: service wrenches, guards on mortise chuck, planer guide. Weight 290 kg

NEW MACHINE With Formatschiebetisch 2, 60m Saw blade 250-315 mm Swivel: 90 °-45 ° Planing width 410 mm 4 cutter Blade (no setting more) Dressing table length of 1800 mm Clearance height of 4-225 mm Milling cutter: 90 °-45 ° swivel to the rear Blower rpm: 3000/4000/5000/6000 / 8000 and 10000 RPM Vertical lift 160 mm Engine power: 3 engines 3 KW400 V (4,0 PS) S1 100% continuous operation WJ-500300 Special price: NET Options: Before scoring unit with motor Guide fence 900 mm Integral safety rail 500 mm Westcott Chuck 0-16mm Milling Eccentric clamp Right - and left-hand rotation (BUR) Engine 4.0 KW (5.5 HP) S1 100% Planer blade 410 HSS G & WJ-BA-410-HSS

SCM C30 4-fold combination machine Format Circular Saw Dressing Thickness Planer Machine Milling Machine Planing width 300mm Planing shaft: 3-tersa knife shaft Dressing table length: 1200mm Passage height: 3-200mm Format sliding table: 1070mm Besaeumlaenge Cutting height: 80mm Saw 90°-45° swivel Engine power: 400V 2 hp S1 Milling machine rigid 90° Milling machine rpm: Speeds of 4200-6300 rpm or 5000-7500 rpm G&STÜ-5500030 relkag21 SPECIAL PRICE: Fits in any small workshop!

Wood machining center WJ-CU-32 400V 3-motor 4 KW (5.5 HP), Formatschiebetisch 2300mm, square table with telescopic and the back fence a usziehbar as a guide fence-45 ° / 90 ° / + 45 ° (swivelling) can be used. Saw unit 90 °-45 ° swiveling Doppelaufhaengeung of the unit. Saw blade 250-315 mm. Parallel cutting width 860 mm, Speed of up to 4000 rpm, Before scoring unit with motor, tiller 30s spindle, Usable height 125 mm, 90 °-45 ° to the rear swivel, Double suspension of unit, Rpm: 3000/4000/5000/6000/8000 and 10000 RPM.,. Diameter of table opening of 260 mm, dressing planing width 320 mm, length 1500 mm, Paralleiogrammverstellung of tables, Dual opening system of the tables in the back, Planing fence 90 °-45 ° swiveling,. 4-225 mm, passage height Feed speed of 8 m / min., Dust nozzle 120 mm, all units and tables from MASCHINENGRAUGUss! G & WJ-CU320N s ...

WEIBERT WJ-SAe-FR2 2.3 3-3.2 Formatschiebetisch: 2300 mm to 3200 mm) Cutting height: 103 mm Blade 90 °-45 ° swiveling. 315 mm Scoring unit: separate drive Milling spindle: swivel Blower RPM & #65279;: 1400/3500/6000 and 8000 min. Motor power: 5KW streaked 400V 50 Hz Saw: 4KW OPTIONS for an additional fee available! Integral safety rail 500 mm Left and right rotation Suction pipe with suction hose Degree grid system on the boom G & WJ-SAe-FR2 2.3/3.0/3, 2m SPECIAL PRICE PLEASE REQUESTS! OPTIONS for an additional fee available!

Weibert form7-75 Edge sanding machine infinite angle adjustment (0 ° 90 °) vertical and horizontal loop with oscillating abrasive belt (good stock removal) spring loaded clamping device for belt Diameter of the grinding roller rubberized 80 mm Belt: 2260 x 150mm Contact surface (graphite Edition) 170 x 820 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900750

Weibert form 7-85 Edge sanding machine Infinite angle adjustment (0 ° to 90 °) Vertical and horizontal loop with oscillating abrasive belt (good stock removal) Table height adjustment by Handwheel Spring loaded clamping device for belt Grinding roller diameter 80 mm Belt: 2510 x 150mm Contact surface (graphite Edition) 180 x 950 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900850

JPT-260 Planer - Thicknesser Planing width: 256 mm Drum: 3 - Strip cutter Engine power: 230V/400V 2650 W Thickness forward: 3-225 mm Feed speed: 5,5 m / min. Weight 170 kg G & JET-10000289T

max. Working Diameter 1100 mm EXCELLENT CONDITIONS

CATALOG NO. 6946 TECHNICAL SPECIFICATIONS - max width of the workpiece 210mm - max thickness of the workpiece 120mm - number of spindles 2 pcs - spindle diameter 50mm in advance: - 3 insertion, pulling, rubber, smooth shafts including 2 double - 2 leading, rubber, pulling shafts including 1 double - heads on supports - head adjustment up / down - electric height adjustment of the upper head - electrical setting of planing thickness - spindles equipped with a brake - main motor 2×5,5kW - smooth regulation of feed speed - feed motor 3kW - feed on cardan shafts - diameter of extraction connection 2x160mm - dimensions length / width / height 2350x1780x1950mm - weight 1882kg – German production – jointers – for sharpening knives on the head – 2 Hydro heads included – unpainted – very good condition, used planer Net price: 33900 PLN Net price: 7533 ...

CROSS-FEED SPLICER Manufactured by Fisher+Rückle Type: CROSSMASTER Model: FZR

Manufacturer: Blum, Type: Einbohrgerät für Topfbänder, Drill gearings: 1, Drill gearings: 1, Drill gearings: 1, Number of spindles: 3,

AUTOMATIC CUTTING , BORING and MOULDING machine model BALESTRINI FTA second hand machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. the BALESTRINI FTA performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined. all movements of the machine are controlled by pneumatic devices and sliding carriage is hydraulic composed by 3 working units : 1 - Cutting unit circular saw max. diam. mm.400 motor power hp 3 2- Boring unit boring head with 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 hydraulic sliding carriage

AUTOMATIC GLUE SPREADER type OMMA OPEN 1400 year 2003 CE mark : YES technical details : useful working width mm. 1400 max. working thickness mm. 80 working speed : 18 mt/min. spreading rollers diam.mm.250 dosing rollers diam.mm.185 installed power kw 1,6 weight kgs. 1200 volt. 380/50 standard details : - separate electric box - automatic cleaning device for spreading rollers - pressure-free side seals with antifriction flanges to avoid any overheating when long shifts and high working speeds are involved too - careful and sensitive adjustment of the dosing rollers by geardrives - large diameter spreading and dosing rollers - high uniformity of the spreading on full working width - separate gearmotor - collecting tank of the cleaning water - electric plant realized in accordance with high standards with low voltage on secondary circuits, all electric components in ...

OSS 100 Spindle Sander Working table length 370 mm Work table width 295 mm Speed 2000 min¯ ¹ Sanding caps diameter 13, 19, 26, 38, 51, 76 mm Spindle diameter 12.7 mm Oscillation stroke 16 mm Oscillation 58 min¯ ¹ Engine 450 W 230 V 50 Hz Dust nozzle diameter 38 mm Length 390 mm, width / depth 330 mm, height 450 mm Weight 14 kg G & pieces 5903500 Option: Subframe