husky injection moulding machines used for sale

This Husky HL225 RS65 was manufactured in 2011. It features a clamping force of 225 tons and a screw diameter of 60 mm, optimized for high-speed PET preform production. The machine includes a platen size of 750 x 750 mm and an opening stroke of 500 – 550 mm. If you are looking to get high-quality injection moulding capabilities, consider the Husky HL225 RS65 electrical injection moulding machine we have for sale. Contact us for further details.

Two complete injection molding plants with two Husky injection molding machines, four complete moulds with all-metal separator, Motan gravimetric mixing system and crane system are available. 1) 2x Husky H-PET230 AE RS95, year of manufacture: 2015, max. shot weight: 2424g, max. PET throughput: 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, base thickness: 2.30mm, cavities: 48, cycle time: 12.1s-12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, base thickness: 2.3mm, cavities: 48, cycle time: 14.4s-15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, base thickness: 2.2mm, cavities: 32, cycle time: 11s-11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, base thickness: 2.42mm, cavities: 32, cycle time: 13.4s-14s. To ...

Injection moulding machine for food and beverages caps

Injection moulding machine for food and beverages caps

Injection moulding machine for PET preforms

Injection moulding machine for PET preforms

This Husky GL 300PET P100/110 E12O was manufactured in 2002. It features a distance between tie bars of 720 × 720 mm, a maximum mold stroke of 700 mm, and a screw diameter of 120 mm. The machine offers a screw L/D ratio of 25.0:1 and an injection pressure of 1172 bar. If you are looking to get high quality molding capabilities consider the Husky GL 300PET P100/110 E12O machine we have for sale. Contact us for more information.

This Husky HPETL230E-RSE95D-95 was manufactured in 2015. It is an all-electric injection molding system with a maximum throughput of 390 kg/h PET and a max shot weight of 2424 g PET. The clamping unit is fully electric with a toggle drive, and it features an integrated control system for additional equipment. Consider the opportunity to buy this Husky HPETL230E-RSE95D-95 electrical injection moulding machine. Contact us for more information about this machine.

This Husky E 3150 RS 170 155 was manufactured in 1997. It features a clamping force of 31,500 kN, a screw diameter of 155 mm, and a shot weight of 9,642 g. Ideal for large-scale production, it has a stroke volume of 13,205 cm³ and an injection pressure of 1,636 bar. For more information about this machine, please reach out to us.

Used injection molding machine, Manufacturer of Husky Injection Systems Ltd. Type: GL225RS60/50 Year of constr.: 23.04.1998 400 V, 96 A greatest engine, 42 A total load heating Functional The machine can be visited like us. Price: 8.000,00 plus VAT, from stock Sale even after parts possible

Used injection molding machine with Siemens controller, Manufacturer of Husky Data plate: Load supply no. 1 400V 207 A, 50 Hz, 3 p + N + PE system Biggest motor 110 A Total load heating 90 A Short circuit intermittent performance 35 kA Load supply Nr 2 Type of machine: LX225 RS60/50 Relay individually on request. The machine can be visited like after consultation with us.

ALREADY SOLD Hylectric 90ton HL90 RS45/42 for sale ask for details 400volts 50hz

2 x Husky HL500RS80 2016 injection moulding machines

motivated seller Edible Oil PET Preform Mould Cavities: 32 Product 1,5 liters Neck Finish 29mm Working Hours: 43.843 Hours Preform Weight: 41 Grams + Core Set for 36 Grams Husky G-line and X-line compatible

Clamping Force: 1000 ton // Shot Weight (Max): 6995 g

UNDER NEGOTIATION HUSKY GL300 System 48mm +3025 +Edible Oil 32mm + 2921 molds OPPORTUNITY HUSKY GL300 YEAR 1998 MOLDS + 48mm water neck finish 32 cavity complete mold (hot runner) with 2 sets of core (81gr~85gr~91gr.) + 30/25 water neck finish 48 cavity complete mold (hot runner) with 1 core set (16~18.2 gr) + 32mm edible oil (snap on)(wide edible oil) neck finish cold half mold with core set (24~27gr.) + 29/21 edible oil 25 gr neck finish preform change over kit. Auxiliaries: Piovan mold dehumidifier, resin dryer with hopper, and T conveyor 400v 50hz Condition: Fair condition, connected (can be inspected) More pictures upon request USA Line: +1 305 831 8888 whatsapp +5491157143569 j.plaul@optimisense

ALREADY SOLD Hypet 500 for sale We only sell the machine with a mold 144 cavity complete mold 29/25 neck finish preform weight 10.63 grams made by Husky This machine HPP 4.0 and ISS, fast speed. Cycle 6.2 (83612 preforms per hour) 2 Million preforms per day Manufactured 2011 Installed 2012 380v 50hz Excellent condition

UNDER NEGOTIATION two HUSKY GL300 PET machines for sale, available 2022 Q1 Both upgraded by Husky to run 72 cavities molds, in production, exworks Europe Ask for details,

JUST SOLD HUSKY Hypet300 HPP5 P100/100 EE100E 18.000 preforms/h (PV 14,6gr) max. 72 cavities; screw diam. 100mm; max. screw speed 108rpm; stroke 400mm; max. melt pressure 25367psi; incl. viscosity monitor PTI; incl. Plastic Systems DM20L volumetric dosing unit (2018) and PS desiccant hopper MOQOP (2018) and temp. unit HPP5H300; incl. Plastic Systems DSH 3003-C-INT 5.0 coolpik mould dehumidifier; incl. Plastic Systems TB-SD300 double softdrop unloader; NO MOLD INCLUDED max. 400V/172A; total machine dim. L13000 x W4000 x H27500; own weight total 22t; meter reads 7.416/16,6mio pressings exworks EUROPE

Updated info 35.9 grams PCO1810 HUSKY Cold Half 96 Cavities Year 2005 (Made in Canada by Husky) 31.7 grams PCO1881 Short Neck MPET Core Set 96 cavities Year 2012 (Made in Canada by Master Pet) LOW WORKING HOURS

(BEING NEGOTIATED) HUSKY HYPET AE 230 RSE 80D/80 + MOLD + AUX inc CHILLER OCT 2013 Mold : 14g x 48 (30mm neck for water) cavity (HUSKY) Cycle time : 9 sec Including accessories 1.Dehumidifying dryer 2.Chiller 3.Hopper 4.Robot 5.Dew condensation prevention device FASTEST DELIVERY MUST GO ASK FOR VIDEO WILL NOT LAST LOCATED IN ASIA FREQ BOTH 50 AND 60HZ

HUSKY HPETL230E-RSE95D-95 + 48 CAV HOT RUNNER + AUX inc CHILLER DEC 2015 Mold: INCLUDED (HUSKY) ATTENTION NO COLD HALF INCLUDED Cycle time : 9 sec Including accessories 1.Dehumidifying dryer 2.Chiller 3.Hopper 4.Robot 5.Dew condensation prevention device FAST DELIVERY LOCATED IN ASIA FREQ BOTH 50 AND 60HZ

Hypet400HPP P100/120 E140 + 96 Cavities Husky Mold + Piovan Auxiliaries Year 2008 21.7g 96cav mold Expected delivery July2023 Can be inspected and seen in production

Hypet400HPP P100/120 E140 + 96 Cavities Husky Mold + Piovan Auxiliaries Year 2010 Expected delivery July2023 Can be inspected and seen in production

2 weeks offer - will not last Hypet400HPP P100 120 E140 year 2011 Plastcis systems auxiliaries NO MOLD working hours 70k Motivated seller

2 weeks offer - will not last Hypet400HPP P100 120 E140 year 2011 Plastcis systems auxiliaries NO MOLD working hours 77k Motivated seller seller offer No. resale 070623B

WILL NOT LAST Husky Hypet 300 P100/110 E100 year 2010 working hs approx 65.000 Condition In production Availability Immediate Auxiliaries Resin dryer with hopper and Mold dehumidifer Cavities 72 Mold YES 2925 water short 12g and 13g 3025 water long/milk 13g 14.5g 15.5g 17.5g ask for info and dont delay

USED in working order HMI for Husky PET and conventional injection molding machines All Husky models manufactured between 1998 and 2005 Brand Xycom Automation Model 9960 Part number 726619 Voltage 100-250v Frequency 50 and 60Hz Made in USA

Key data: 3000 kN, 3268 g/PS, 100 mm

LX300 PET P100/120 E100 in production 48 cavities year 1996 exworks south america Auxiliaries included Plastic Systems resin dryer model DR224HT Throughput 800 kg/h Silo capacity 7 ton Radial vacuum pump Mold dehumidifier Piovan model RPA 2400 Conveying system TEC 24X2X10.4

Key data: 5000 kN, 3845 g/PS, 120 mm

Husky SX500 running 96 cavities molds not in production since Feb 2024 120mm screw 3845cm3 shotweight manufactured June 1995 between bars 920x920mm

Key data: 3000 kN, 3268 g/PS, 100 mm

GL300 PET P100/120 E100 in production running 72cav molds exworks south america 1997 auxiliaries Pet resin dryer Moretto DP311 model DP 311HT-CC'S Throughput 550 kg/h silo capacity 3.5Ton radial vacuum pump mold dehumidifier Plastics Systems DSH2400 conveying system Plastic Systems NSC-NP

Key data: 3000 kN, 3268 g/PS, 120 mm

GL300 PET P100/120 E120 in production running 72cav molds exworks south america 1998 auxiliaries Pet resin dryer Plastic Systems DR218HT Throughput 550 kg/h silo capacity 4Ton radial vacuum pump mold dehumidifier Plastics Systems DSH2400 conveying system Plastic Systems Plastic Systems P+D8:J55SNC 9

Key data: 3000 kN, 2746 g/PS, 120 mm

GL300 PET P100/110 E120 in production running 72cav molds exworks south america 2002 auxiliaries Pet resin dryer Piovan DS528 Throughput 650 kg/h silo capacity 5Ton radial vacuum pump mold dehumidifier Plastics Systems DSH2400 conveying system TEC - 24X2X10.5

1 pc for sale, in working order, good condition Husky HPN 726619 HMI Human Machine Interface FOR SALE XYCOM 9960 Operator Station HMI for Husky G-line, Index-line & others PET Preforms Injection Molding Machines. Exworks Miami USA contact us: j.plaul@optimisense Whatsapp +5491157143569 US Mobile +1.305.831.8888 Skype: optimisense For more info and pictures join our FB group HUSKY USED PET PREFORMS RELATED MACHINERY

Hot Runner Controller - Husky Altanium X-c-12-NEO2-12 Year of construction: Location: Lodz, Poland Description: 12 hot zones with wiring Touchscreen All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Used Used PET Prefom Presses Husky 2010: Year: 2010 Condition: Good Used PET Prefom Presses Husky: Model: HyPET300 HPP P100/110E 120-hpp 26 Year: 2010 Speed: preform 11,4g ca 39.800 pcs/hrs preform 13,0g ca 38.100 pcs/hrs Number of molds: 72 Code: W 109 More details: https://bottlingscout.com

Used Used Husky preform press: Year: 1989 Condition: Good USED HUSKY PREFORM PRESS Year: 1989 Model: XL225PET Press to 32 cavities Stamp: 31,8 Gr (made by husky in 2010) Safety protections Code: W 95 More details: https://bottlingscout.com

Engel injection moulding machine old

Control CC 100 for ENGEL injection moulding machines

Arburg 420C-1300-675 (167) Item number: 167 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 297 g Clamping force: 1,300 kN Screw diameter: 50 mm Spray pressure: 2080 bar Spar spacing: 420 x 420 mm Clamping plate size: 615 x 615 mm Tool installation height min.: 350 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 84840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Funnel: No Core train: Yes Air valve: Yes

Inv. Num. : 5875 Type: KM 300-1400 C1 Producer: Krauss Maffei Created: 2001 Parameters: Laser ON: 70,000 h Clamping force: 300 t Screw diameter: 60 mm Injection capacity: 679 cm³ Injection mass: 618 g Min. height of clamping plate: 995 mm Min. width of clamping plate: 1050 mm Distance between uprights (horizontal): 630 mm Distance between uprights (vertical): 630 mm Ejector stroke length: 200 mm Maximum spraying pressure: 2000 bar Pump power: 45 kW Opening the mold: 820 mm Machine length: 6000 mm Machine width: 2100 mm Machine height: 2400 mm Injection weight: 12,500 kg Equipment: Robot Getecha Aschaffenburg GL 5 (built in 2001)

Key data: 5500

Screw diameter; H3500 - 85 mm / H2000- 65 mm Injectable volume: H3500 - 946 cm3 / H2000- 511 cm3 Injection pressure: H3500 - 1509 bar / H2000-2228 bar Column width: 930 x 930 mm Minimum mould thickness: 300 mm max: 1000 mm Opening stroke: 1100 mm Cores: 4 Robot Interface: Yes Options: Automatic clamping 24 heated zones

Key data: 2000

Nozzle spacing: 100 mm Screw diameter: H260: 38 H470: 45 mm Injectable volume:H260: 168 H470: 278 cm3 Injection Pressure: H260: 1564 H470: 1659 Column width: 610 x 610 mm Mould thickness: 280-760 mm Opening stroke: 560 mm Cores:: 2 Robot Interface: Yes Possibility of a GROSFILLEY swivel base

Key data: 3200 kN, 359 g/PS, 50 mm

1.0 St. gebr. Two-component injection molding machine Manufacturer: ARBURG Type: 720A3200-800/70 Year of Make: 2017 Clamping force: 320 tons Spar spacing 720 x 720 mm Installation height min./max.: 300 - 800 mm Opening travel: 600 mm Screws DN 1: 50 mm Max. displacement: 392 cm³ Moulded part weight in hp: 359 g Screw DN 2: 22 mm Max. displacement: 34 cm³ Moulded part weight in hp: 31 g Control: Selogica Request technical equipment.

Container Size (Max.): 2,5 l

Injection stretch blow moulding machines for PET bottles

Key data: 1500 kN

Clamping force: 150 t. Clamping type: Toggle system. Tie-bar spacing: 470 × 470 mm. Platen size: 700 × 700 mm. Mold height (min–max, approx.): 180–500 mm. Opening stroke: 420 mm. Ejector stroke: 130 mm. Injection volume: 320 cm³. Screw diameter: 42/45 mm (to be confirmed). Heating zones: 4. Machine dimensions: 5000 × 1400 × 2000 mm. Machine weight: 6000–7000 kg.

Key data: 2000 kN, 352 g/PS, 50 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2000 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 450 mm Opening travel: 700 mm Screws DN 1: 50 mm Max. displacement: 392 cm³ Moulded part weight in hp: 352 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control

Key data: 2000 kN, 216 g/PS, 40 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2001 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 550 mm Opening travel: 700 mm Screws DN 1: 40 mm Max. displacement: 251 cm³ Moulded part weight in hp: 216 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control

Key data: 2000 kN, 216 g/PS, 40 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2004 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 500 mm Opening travel: 750 mm Screws DN 1: 40 mm Max. displacement: 251 cm³ Moulded part weight in hp: 216 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control

Key data: 62 kN

Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, turntable and additional automation Year of Make: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - Touch Screen Additional equipment: Production line with robot, turntable and additional automation Vertical Injection Molding Machine Air valves Injection for mold division Automatic adjustment of the injection unit setting (top - bottom) The turntable is driven by a servo motor controlled by an inverter – very precise Automatic part feeding with quality control system Machine workplace protection with safety package Dimensions: Weight: 350 kg Length/Width/Height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to part ...

Key data: 1100 kN

Ferromatik Milacron K110D-S/2F / 2K Injection Molding Machine Year of Make: 1998 Injection unit: Screw diameter: 30 mm Injection weight: approx. 85 g Spray pressure: 2298 bar Dosing volume: 99 ccm Clamping unit: Clamping force: 110 t Spar spacing: 470x470 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: hydraulic Control: Ferromatik Milacron Additional equipment: 2-Component Injection Molding Machine Euromap 67 Robot interface Hydraulic core pull x 4 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Screw diameter in vertical injection unit: ⌀25 mm - approx. 43 g/hp The machine was regularly serviced Recently, the service center replaced the cylinder of the machine with worm and the hydraulic valves with new ones Dimensions: Weight: 6300 kg Length/Width/Height: 5.00x1.60x3.60 m All offer ...

Key data: 1500 kN

Ferromatics Milacron Magna T(MTs) 150-450 / Production line with the Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and contactor housing / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 45 mm Injection weight: 215 g Spray pressure: 1984 bar Dosing volume: 226 ccm Clamping unit : Clamping force: 150 t Tiebar spacing: 510x510 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: toggle lever Control: B&R - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (for additional payment) Injection unit is wear-resistant and resistant to corrosion Main motor of the machine – servo motor driven by inverter Central lubricatio ...

Key data: 3200 kN, 309 g/PS, 50 mm

Production Line Manufacturing Coffee Capsules NESPRESSO Consisting of the following components: Pos. 01) Injection moulds for capsules, manufacturer: FOSTAG AG 1.0 pcs tool with 16 cavities 1.0 pcs tool with 32 cavities Pos. 02) Two-component injection moulding machine, Bcobrsw Nriue Rvf Nyju Manufacturer: ARBURG, Type: 720A3200-800, Year of manufacture: 2017 The capsules are made as falling parts.

Engel Victory 1050/220 Tech Ecodrive with the Engel Viper 20 robot / hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 50 mm Spraying weight: approx. 395 g Spray pressure: 2332 bar Dosing volume: 422 cc Clamping unit : Clamping force: 220 t Spar spacing: 0x0 mm Size of the clamping plates: 880x830 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: Production line with the Engel Viper 20 robot Machine in very good technical condition Operating hours: 32,609 h in automatic mode Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 4 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the movable clamping plate Control with hot runners x 12 Injection unit is wear-resistant and resistant t ...

Haitian MA1600IIS with the Hilectro V-800IS robot / hybrid machine Year of Make: 2020 Injection unit: Screw diameter: 45 mm Injection weight: 291 g Spray pressure: 1780 bar Dosing volume: 320 ccm Clamping unit : Clamping force: 160 t Spar spacing: 470x470 mm Size of the clamping plates: 700x700 mm Ejector: hydraulic Clamping unit: toggle lever Control: Keba - Touch Screen Additional equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air Valve x 3 Hydraulic core pull x 3 Main motor of the machine - Servo motor driven by inverter - Energy saving Central lubrication It is possible to change the screw diameter Hilectro V-800IS robot Year of Make: 2020 5-axis robot: 4 axes are driven by servo motors (electric): X, Y, Z, B (rotation) Touch control panel Robot with adapt ...

with spare screw, high-pressure hose and various spare parts - see pictures

2 pcs. molds with 1-1 cavity, automat with hot runnel control, PP material molds sizes both: 300x245x213 mm machine size min. 25 T

1 cavity from PP material mold sizes: 383x450x384 mm machine size min. 100 T

Used injection molding tools for the manufacture of plastic slippers. Offer total 43 pcs. refers to two cavities tooling and accessories. From small children (23) to men (45) in size, it is suitable for the manufacture of slippers of various types and colors. For sale total 12,900 Euro

Key data: 4200 mm, 1090 , 70

Screw diameter: 70 mm Injection weight in polystyrene: 1090 g Clamping force: 4200 kN Screw diameter: 70 mm Stroke volume: 1212 cm³ Injection weight in polystyrene: 1090 g/hp Injection pressure: 1,877 bar Clamping force: 420 t Lights Tie bar spacing H x V: 810 x 710 mm Tool installation height - min.: 380 mm Opening distance: 710 mm Microprocessor control: NC4 Screen text: German Operating instructions: German FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- Pump drive power: 45 kW Total connected load: 82.4 kW Total weight: 20,000 kg Total size: 7.9 x 2.3 x 2.5 m Payment terms: 100 % before taking over the machine, net only

Key data: 3500 mm, 810 , 60

Screw diameter: 60 mm Injection weight in polystyrene: 810 g Clamping force: 3500 kN Screw diameter: 60 mm Stroke volume: 891 cm³ Injection weight in polystyrene: 810 g/hp Injection pressure: 2,420 bar Clamping force: 350 t Lights Tie bar spacing H x V: 720 x 720 mm Tool installation height - min.: 350 mm Opening distance: 730 mm Microprocessor control: NC5 Screen text: German Operating instructions: German FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- Pump drive power: 55 kW Total connected load: 78.1 kW Total weight: 17,300 kg Total size: 7.4 x 2.0 x 2.4 m Payment terms: 100 % before taking over the machine, net only

Key data: 2500 mm, 521 , 55

Screw diameter: 55 mm Injection weight in polystyrene: 521 g Clamping force: 2500 kN Screw diameter: 55 mm Stroke volume: 570 cm³ Injection weight in polystyrene: 521 g/hp Injection pressure: 2,470 bar Clamping force: 250 t Lights Tie bar spacing H x V: 630 x 630 mm Tool installation height - min.: 300 mm Opening distance: 550 mm Microprocessor control: Selogica direct Screen text: German Instruction manual: German FHK interface for robots: Euromap 67 Core pull: 1 x Without material hopper / Without water battery: -/- all-electric injection moulding machine Total weight: 14,500 kg Total size: 6.7 x 2.1 x 2.3 m Payment terms: 100 % before taking over the machine, net only

Key data: 3200 mm, 287 , 50

Screw diameter: 50 mm Injection weight in polystyrene: 287 g Clamping force: 3200 kN Screw diameter: 35 or 50 mm Stroke volume: 141 /314 cm³ Injection weight in polystyrene: 154 / 287 g/hp Injection pressure: 2,500/1280 bar Clamping force: 320 t Lights Tie bar spacing H x V: 720 x 720 mm Tool installation height - min.: 300 mm Opening distance: 600 mm Microprocessor control: Selogica direct Screen text: german Instruction manual: german FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- all-electric injection moulding machine Total weight: 14,500 kg Total size: 6.5 x 2.1 x 2.2 m Payment terms: 100 % before taking over the machine, net only

This 3-axis Krauss Maffei 1600-17200MC hydraulic injection moulding machine was manufactured in 2001. It features a clamping force of 16,000 kN and a screw diameter of 125 mm. The machine has a maximum shot weight of 7450 g and a platen size of 2600 x 2110 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1600-17200MC machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2024. This BOY XS 161 features a clamping force of 100 kN and a maximum injection pressure of 2298 bar. It includes a 14 mm screw diameter and a theoretical shot volume of 6.1 cm³. If you are looking to get high-quality injection moulding capabilities, consider the BOY XS 161 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2009. This Negri Bossi BM BIRAGHI SINTESI 100 features a clamping force of 1000 kN and an opening stroke of 370 mm. The machine has a platen size of 610 × 550 mm and a maximum mould height of 450 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi BM BIRAGHI SINTESI 100 machine we have for sale. Contact us for further details.

This 3-axis Arburg 820 S 4000-2100 hydraulic injection moulding machine was manufactured in 2016. It features a clamping force of 4000 kN, a platen size of 1171 x 1171 mm, and a maximum mould installation height of 850 mm. With a screw diameter of 70 mm and an injection unit of 2100, this machine is well-equipped for high-quality moulding capabilities. Consider the opportunity to buy this Arburg 820 S 4000-2100 hydraulic injection moulding machine. Contact us for further details.

Hydraulic injection moulding machine manufactured in 1999. This DEMAG Ergotech 150-610 Viva features a screw diameter of 45 mm and a maximum daylight between platens of 850 mm. It has a shot weight of 260 g and a maximum mold installation height of 250 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech 150-610 Viva machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2002. This Krauss Maffei 1300-12000 MC features a screw diameter of 105 mm and a maximum processing temperature of 450°C. It includes a hydraulic mechanical 2 platen clamping system and a robust motor current of 261 A. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1300-12000 MC machine we have for sale. Contact us for further details.

This 3-axis DEMAG Erdotech 500-3300 hydraulic injection moulding machine was manufactured in 2005. It features a screw diameter of 70 mm and a shot weight of 1,230 g. The machine has a maximum daylight of 1,450 mm and includes a handling system with a Wittmann linear robot. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Erdotech 500-3300 machine we have for sale. Contact us for further details.

This Krauss Maffei KM 350-3000 was manufactured in 2003. It features a clamping force of 3500 kN and a maximum opening stroke of 920 mm. The machine is capable of processing various materials including PA, PP, PE, and ABS. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 350-3000 hydraulic injection moulding machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2003. This Engel DUO 5550/800 features a clamping force of approximately 800 tons and a screw diameter of about 90 mm. It has a shot volume of around 2700 cm³ and a maximum injection pressure of approximately 1900 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel DUO 5550/800 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2011. This ITALTECH KS 1200 8300 ES features a screw diameter of 130 mm and a clamping force of 11,772 kN. It has a shot volume of 8630 cm³ and a maximum injection pressure of 1460 bar. If you are looking to get high-quality injection moulding capabilities, consider the ITALTECH KS 1200 8300 ES machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2000. This Netstal Synergy 1500-460 features a clamping force of 1500 kN and an injection force of 279 kN. It offers an opening stroke of 0–450 mm and a mould height range of 400–700 mm. If you are looking to get high-quality moulding capabilities, consider the Netstal Synergy 1500-460 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2005. This Arburg SELECTA 820 S 4000 - 3200 features a clamping force of 4000 kN and an opening stroke of 700 mm. The machine has a platen size of 1171 x 1171 mm and a maximum moving platen weight of 4500 kg. If you are looking to get high-quality injection moulding capabilities, consider the Arburg SELECTA 820 S 4000 - 3200 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2016. This Netstal Synergy 600-230 features a clamping force of 600 kN and an injection force of 182 kN. It has an operating pressure of 210 bar and an opening stroke of 0-350 mm. If you are looking to get high-quality injection moulding capabilities, consider the Netstal Synergy 600-230 machine we have for sale. Contact us for further details regarding this machine.

Hydraulic injection moulding machine manufactured in 2005. This Battenfeld TM 210/1330 has a weight of 9200 kg and operates with a hydraulic system pressure of 210 bar. It features a rated motor current of 68 A and a supply system of 3-phase with neutral. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld TM 210/1330 machine we have for sale. Contact us for further details.

screw size: 98 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 8600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 62 mm injection shot weight in Polysterol: 903 g/PS closing pressure: 3300 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 84 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 440 kN volumn: 1660 volt: V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sumitomo Demag injection molding machine Systec multi 210/580-430h/200r 2021 Wittmann Robot W822 Z:2500/Y:1400/X:550 2021

Key data: 450 mm, 63 , 25

Screw diameter: 25 mm Displacement: 69 cm³ Injection weight in polystyrene: 63 g/hp Injection pressure: 2,400 bar Clamping force: 45 t tie-barless Tool installation height min.: 175 mm Opening distance: 355 mm CONTROL: CC200 Screen text: german / german Instruction manual: german / german Sprue picker er/usp Pump drive power: 11 kW Total connected load: 17.8 kW Total weight: 3,300 kg Dimensions L x W x H: 3.3 x 1.2 x 2.0 m m m Payment terms: 100% before taking over the machine, net only

Key data: 1200 mm, 141 , 35

Screw diameter: 35 mm Stroke volume: 154 cm³ Injection weight in polystyrene: 141 g/hp Injection pressure: 2,177 bar Clamping force: 120 t tie-barless Tool installation height min.: 300 mm Opening distance: 500 mm CONTROL: CC200 Screen text: german / german Operating instructions: german / german incl. ERC 23/1-F robot, with integrated storage belt Pump drive power: 15kW Total connected load: 24.2 kW Total weight: 7,300 kg Dimensions L x W x H: 4.4 x 1.5 (+0.8) x 2.0 m m m m Payment terms: 100 % before taking over the machine, net only

Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible.