hesse by isitan sheet metal working used for sale

: neu : ca. 12 Wochen ab Auftrags : Türkei : 25200 € : 481.32 € : 1050 mm : 2.5 mm : 2.5 mm : 2 mm : 90 mm : 4,5 m/min : 2.2 kW : 2250 mm : 1000 mm : 1500 mm : 900 kg FOR ROUND AND ELEPTIC SHAPES FOR MASS PRODUCTION (CYCLE UP TO ONLY 20 SEC POSSIBLE) 4 rolls NC control with touchscreen Top roll driven by hydromotor and plantary gearbox Hydraulic drop end Mobile control panel Hardened rolls Operating manual in English or German OPTION: Feeding table price on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 11800 € : 226.56 € : 1050 mm : 5 mm : 130 mm : 3,5 m/min : 2.2 kW : 2200 mm : 750 mm : 1000 mm : 1200 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 41200 € : 786.92 € : 40 to : 1550 mm : X und Y Achse : 160 mm : 1260 mm : 320 mm : 380 mm : hydraulisch : 90 mm/s : 10 mm/s : 600 mm : 845 mm : 100 mm : 120 l : 5.5 kW : 2000 mm : 1600 mm : 2235 mm : 3450 kg NC control for immersion depth (Y) and back gauge (X) synchronization control by means of a torsion shaft sheet support arms light barriers intermediate pieces for the upper tool clamping die seat and die die seat with 4 V openings split upper tool, slightly cranked, divided pedal user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): laser safety device Fiessler NC controlled R axis manual crowning table motorized crowning table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 9656 : prompt, Zwischenverkauf v : Türkei : 2600 € : 1 : 1 : 1050 mm : 1 mm : 56 mm : 1400 mm : 700 mm : 1120 mm : 185 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 6700 € : 129.31 € : 1270 mm : 2.5 mm : 90 mm : 6 m/min : 1.1 kW : 1850 mm : 700 mm : 1200 mm : 520 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 14700 € : 282.24 € : 1550 mm : 4 mm : 140 mm : 3,5 m/min : 2.2 kW : 2700 mm : 750 mm : 1000 mm : 1420 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5200 € : 100.36 € : 1270 mm : 1.5 mm : 75 mm : 1.5 kW : 1830 mm : 700 mm : 1160 mm : 400 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 9740 : prompt, Zwischenverkauf v : Türkei : 6500 € : 125.45 € : 1 : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 080102 : prompt, Zwischenverkauf v : Türkei : 57300 € : 804.11 € : 1 : 42100 € : 60 to : 2100 mm : X und Y Achse : 160 mm : 1700 mm : 320 mm : 380 mm : hydraulisch : 90 mm/s : 10 mm/s : 600 mm : 845 mm : 100 mm : 120 l : 7.5 kW : 2450 mm : 1600 mm : 2235 mm : 4340 kg NC control for immersion depth (Y) and back gauge (X) synchronization control by means of a torsion shaft sheet support arms laser safety device Fiessler motorized crowning table intermediate pieces for the upper tool clamping die holder for 60 mm tools die with 4 V openings upper tool, slightly cranked, sectioned foot pedal user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 7500 € : 144.75 € : 2 mm : 700 mm : 1.1 kW : 7,5 m/min : 1400 mm : 400 mm : 1150 mm : 360 kg : 120 / 1.000 mm : 280 mm gearbox motor with brake footpedal central lubrication OPTIONAL EQUIPMENT (PRICE ON REQUEST): pneumatic upper roll feed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 10500 € : 201.6 € : 1050 mm : 4 mm : 110 mm : 2.2 kW : 1100 mm : 750 mm : 1000 mm : 990 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2022 : 8254 : prompt, Zwischenverkauf v : Türkei : 22240 € : 1 : 30 to : 1250 mm : X und Y Achse : 150 mm : 1010 mm : 255 mm : 265 mm : hydraulisch : 210 mm/s : 10 mm/s : 3 kW : 1760 mm : 1375 mm : 2135 mm : 1700 kg DEMO MACHINE, MINT CONDITION NC control for immersion depth (Y) and back gauge (X) synchronization control by means of a torsion shaft sheet support arms light barriers die seat and die die seat with 4 V openings split upper tool, slightly cranked, divided pedal user manual in GERMAN incl. laser protection device Fiessler (sample photo) BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstr ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 13400 € : 257.28 € : 1550 mm : 3 mm : 110 mm : 3 m/min : 2.2 kW : 2700 mm : 750 mm : 1000 mm : 1200 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 43000 € : 821.3 € : 2050 mm : 10 mm : 10 mm : 8 mm : 10 mm : 8 mm : 8 mm : 6 mm : 200 mm : 200 mm : 180 mm : 6 m/min : 3850 mm : 1350 mm : 1290 mm : 3750 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 7000 € : 135.1 € : 1550 mm : 2 mm : 90 mm : 6 m/min : 1.5 kW : 2130 mm : 700 mm : 1200 mm : 545 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN or ENGLISH OPTIONS: powered back roll EUR 1.000,- digital readout EUR 1.100,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 38000 € : 725.8 € : 2050 mm : 8 mm : 8 mm : 6 mm : 8 mm : 6 mm : 6 mm : 4 mm : 180 mm : 180 mm : 150 mm : 5 m/min : 3850 mm : 1350 mm : 1290 mm : 3300 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090202 : prompt, Zwischenverkauf v : Türkei : 3600 € : 1 : 1.2 mm : 100 mm : 140 nm : 8 Stk. : 62 mm : 0.75 kW : 32 1/min : 900 mm : 450 mm : 1350 mm : 135 kg Haevy duty cast iron main frame Brake motor Foot pedal Adjustable lower roll 8 set of rolls Complete with stand User manual in ENGLISH or GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 9722 : prompt, Zwischenverkauf v : Türkei : 17300 € : 332.16 € : 1 : 2050 mm : 3 mm : 130 mm : 3,5 m/min : 2.2 kW : 3200 mm : 750 mm : 1000 mm : 1500 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor HARDENED ROLLS manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in GERMAN OPTIONS (PRICES ON REQUEST): (time of delivery with options approx. 8 weeks) Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 16600 € : 318.72 € : 2050 mm : 4 mm : 140 mm : 2.2 kW : 3200 mm : 750 mm : 1000 mm : 1650 kg 3 reels asymmetrical roller arrangement - with pre-bending 2 driven rollers by means of a brake motor manual Back Roll upper roller can be swiveled forward forward / reverse run conical rounding by inclining the rear rollers movable control panel OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 24500 € : 470.4 € : 1550 mm : 4.5 mm : 4.5 mm : 3.5 mm : 4.5 mm : 3.5 mm : 3.5 mm : 2.5 mm : 130 mm : 130 mm : 130 mm : 5 m/min : 2,2 + 1,1 kW : 3300 mm : 1150 mm : 1110 mm : 2370 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 13200 € : 253.44 € : 1270 mm : 5 mm : 140 mm : 3,5 m/min : 2.2 kW : 2470 mm : 750 mm : 1000 mm : 1350 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090120 : prompt, Zwischenverkauf v : Türkei : 7500 € : 144.75 € : 1 : 1 : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll HARDENED ROLLS tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 12300 € : 236.16 € : 1270 mm : 4 mm : 120 mm : 3 m/min : 2.2 kW : 2470 mm : 750 mm : 1000 mm : 1110 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 4900 € : 109.71 € : 1050 mm : 3 mm : 2 mm : 90 mm : 2080 mm : 700 mm : 1250 mm : 410 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by handwheel lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5100 € : 98.43 € : 315 mm : 315x32x63 mm : 45 / 90 U/Min : rund 105 mm / quadratisch : rund 90 mm / quadratisch : 4.7 kW : 600 mm : 1000 mm : 1400 mm : 200 kg Pneumatic vice Low-voltage start/stop switch in the handle 45-degree left and 45-degree right mitre cuts Split visc (clamps before and after the sawblade) Self-centering visc for optimal cutting position Large base frame for high stability Sawblade not included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090069 : prompt, Zwischenverkauf v : Türkei : 840 € : 1 : 0.8 mm : 80 mm : 110 nm : 7 Stk. : 52 mm : 380 mm : 180 mm : 380 mm : 30 kg 7 tool sets users manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 9684 : prompt, Zwischenverkauf v : Türkei : 970 € : 1 : 1.2 mm : 100 mm : 140 nm : 7 Stk. : 62 mm : 560 mm : 220 mm : 500 mm : 50 kg 7 tool sets users manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2021 : 9502 : Türkei : 2200 € : 1 : 1050 mm : 2 mm : 75 mm : 1930 mm : 700 mm : 1160 mm : 300 kg MINT CONDITION 3 rolls asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 21400 € : 410.88 € : 5 mm : 2000 mm : 250 mm : 3000 mm : 750 mm : 1400 mm : 1350 kg Mobile control panel Hydraulic clamp on center Gearbox motor with brake Motorized sheet centering system Inside cutting system Throat depth: 1200 mm According to EC safety regulations Operating manual OPTIONAL EQUIPMENT (PRICES ON REQUEST): 1 spare blade set Flanging attachment with 1 set rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 060103 : prompt, Zwischenverkauf v : Türkei : 8500 € : 121.59 € : 1 : 6300 € : 350 mm : 350x32x63 mm : 45 / 80 U/Min : 45 ° : 45 ° : rund 115 mm / quadratisch : rund 110 mm / quadratisch : rund 110 mm / quadratisch : 5.85 kW : 1100 mm : 1000 mm : 1400 mm : 300 kg Semi-automatic circular saw designed High production rates, ideal for small and mid production Heavy duty gearbox Cast iron structure Foot switch actuation Hydro-pneumatic operation of saw head smoothes descent for optimum cut Pneumatic vice 2 cutting speeds Adjustable head stroke according to the dimensions of the material which has to be cut Piece counter 45° right to 45° left cutting saw blade not included OPTION: saw blade Dm. 350 mm € 180,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 21800 € : 418.56 € : 1270 mm : 5 mm : 5 mm : 4 mm : 5 mm : 4 mm : 4 mm : 3 mm : 130 mm : 130 mm : 130 mm : 5 m/min : 2,2 + 1,1 kW : 3020 mm : 1150 mm : 1110 mm : 2150 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 13900 € : 266.88 € : 3.5 mm : 750 mm : 2.2 kW : 6,1 m/min : 2000 mm : 600 mm : 1400 mm : 750 kg : 200/1200 mm Rahmen aus geschweißter Stahlkonstruktion Klingen aus Spezialstahl Lange Lebensdauer der Messer dank der konisch gelagerten Wellen Getriebemotor mit Bremse System zur Einstellung des Schnittdurchmessers mit motorisierter Leistung Mobiles Steuerpult System zum Schneiden des Innendurchmessers Ausrüstung gemäß CE Regulierungen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 4700 € : 315 mm : 315x32x63 mm : 45 / 90 U/Min : 45 ° : 45 ° : rund 105 mm / quadratisch : rund 90 mm / quadratisch : rund 90 mm / quadratisch : 1,3 - 1,8 kW : 600 mm : 1000 mm : 1400 mm : 200 kg Manual vice Robust double joint pivot Low-voltage start/stop switch in the handle 45-degree left and 45-degree right mitre cuts Split vice (clamps before and after the sawblade) Sawblade not included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 29000 € : 553.9 € : 2050 mm : 4 mm : 4 mm : 3 mm : 3 mm : 2 mm : 130 mm : 130 mm : 130 mm : 5 m/min : 2,2 + 1,1 kW : 3800 mm : 1150 mm : 1110 mm : 2450 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 28390 € : 542.25 € : 0.4 - 3 mm : 300 mm : 900 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31620 € : 603.94 € : 0.4 - 2 mm : 600 mm : 1200 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 31080 € : 593.63 € : 0.4 - 3 mm : 400 mm : 1200 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 29460 € : 562.69 € : 0.4 - 4 mm : 100 mm : 400 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12630 € : 242.5 € : 0.4 - 2 mm : 200 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12150 € : 233.28 € : 0.4 - 2 mm : 100 mm : 200 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2018 : 070033 : prompt, Zwischenverkauf v : Türkei : 20310 € : 389.95 € : 1 : 0.6 - 4 mm : 300 mm : 900 mm² : 80 mm : 10 Nm : 2.62 kW : 1000 mm : 800 mm : 1400 mm : 330 kg DEMO MACHINE helical gear box Wattdrive pneumatic equipment Festo control SCHNEIDER with touchscreen 2 driven rolls remote service module hand wheel Euchner operating manual in German with EC conformity declaration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12950 € : 248.64 € : 0.4 - 2 mm : 300 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 29990 € : 572.81 € : 0.4 - 3.5 mm : 200 mm : 700 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3100 mm, 16 mm

- Year of construction 2001 Specifications - Cutting length: 3100 mm - Capacity: 16 mm - Stroke: 170 mm - Stroke rate: 10 /min - Oil tank: 410 l - Engine power: 37 kW - Operating voltage: 400 V - Rated current: 72 A - Rated current main fuse: 100 A - Dimensions WxHxD: 3750 x 2400 x 3425 mm - Weight: 13800 kg

This Hesse AD-S 30175 press brake was manufactured in 2017. It features a robust 3050 x 175 TON capacity, a stroke of 265 mm, and operates on a supply voltage of 3 x 400 Volt. Weighing 10830 kg, it ensures stability and precision in operation. If you are looking to get high-quality bending capabilities, consider the Hesse AD-S 30175 machine we have for sale. Contact us for more information.

: neu : 2024 : 9738 : prompt, Zwischenverkauf v : Türkei : 20300 € : 389.76 € : 1 : 1530 mm : 6 mm : 6 mm : 4 mm : 150 mm : 4 kW : 3100 mm : 1120 mm : 1020 mm : 2100 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2468D : prompt, Zwischenverkauf v : Deutschland : 2970 € : 1 : 1890 € : 195 kg : 28 mm DEMO SET / MINT CONDITION consisting of: 1x accessories car (Delivery is galvanised) 4x angle stop 350 x 20 mm 4x adjustable angle stop 250 x 20 mm 15x Adjustment clamp 4x Multi-clamp 6x Stand angle, adjustable 175 x 20 mm 2x Stand angle, adjustable 225 x 21 mm 8x Stop rail 225 x 20 mm 10x Socket bolt 15x Plug holder 3x Ball Tension Bolt 4x Claw clamping bolt 28 x 100 mm 15x Spacer ring The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 145000 € : 2740.5 € : 6080 mm : 6 mm : 4 mm : 350 mm : 10 1/min : 0.5 - 2 ° : 29 : 20 to : 1000 mm : 200 mm/s : 22 kW : 200 l : 5 Stk. : 900 mm : 630 mm : 6370 mm : 7300 mm : 2150 mm : 3400 mm : 2750 mm : 25500 kg linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port CNC controlled cutting gap adjustment by the table (patented) oil cooler manual central lubrication cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 5 support arms wit T-slots oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH PRICE FCA TURKEY (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 97800 € : 1848.42 € : 160 to : 1100 mm : 700 mm : 210 mm : 23 - 110 mm : 60 1/min : 630x400 mm : 8 : 95 mm : 65 mm : 325 mm : 480 mm : 2400 mm : 1430 mm : 3200 mm : 9950 kg 8-fold ram guide light guard mot. ram adjustment hyd. overload safety device automatic lubrication according to CE rules user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 54900 € : 1037.61 € : Doppelsäulenführung : 5400x41x1,3 mm : 20-100 m/min : 440 mm : 440 mm : 610x440 mm : rund 440 mm, quadrat 440 : rund 430 mm, quadrat 430 : rund 320 mm, quadrat 260 : 807,5 mm : 1.1 kW : 4 kW : 0.12 kW : 2850 mm : 2350 mm : 2000 mm : 3600 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 440 CGS NC (with servo instead of hyraulic feed) € 61.900,-- The data for this ad was created with ModulMWS - the sof ...

: neu : 2026 : 070168 : prompt, Zwischenverkauf v : Türkei : 10900 € : 209.28 € : 1 : 150 to : horizontal verschiebbar : 300 mm : 1070 mm : 280x200 mm : 5 mm/s : 10 mm/s : 2110 mm : 1000 mm : 2480 mm : 1870 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 060216 : Juni 2026, Zwischenverkau : Türkei : 20700 € : 397.44 € : Schwenkrahmen : 5200x34x1,1 mm : 20-100 m/min : 440 mm : 440 mm : 610x440 mm : rund 410 mm, quadrat 410 : rund 320 mm, quadrat 250 : rund 410 mm, quadrat 410 : rund 320 mm, quadrat 285 : 860 mm : 0.55 kW : 3 kW : 0.12 kW : 2800 mm : 1210 mm : 1870 mm : 1540 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or EN ...

: neu : ca. 4-6 Monate ab Auftrag : Türkei : 12200 € : 234.24 € : Schwenkrahmen : 3660x27x0,9 mm : 20-100 m/min : 320 mm : 300 mm : 320x300 mm : 640 mm : 0.37 kW : 2 kW : 0.12 kW : 1900 mm : 850 mm : 1300 mm : 770 kg Roller material feed with encoder and NC control blade brush control panel height adjustment bar with limit switch hydromechanical blade tension inverter hydraulic vice coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090187 : prompt, Zwischenverkauf v : Türkei : 14400 € : 276.48 € : 1 : 1350 mm : 3 mm : 35 1/min : 550 mm : 3 kW : 2 Stk. : 850 mm : 400 mm : 1900 mm : 1350 mm : 1260 mm : 1060 kg manualback gauge automatic sheet hold down hold down with rubber pads moveable foot switch side lay 2 supporting arms light barriers on the back of the machine user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 060215 : Juni 2026, Zwischenverkau : Türkei : 9280 € : 179.1 € : Schwenkrahmen : 3160x27x0,9 mm : 20-100 m/min : 270 mm : 270 mm : 340x220 mm : rund 230 mm, quadratisch : rund 150 mm, quadratisch : rund 180 mm, quadratisch : 910 mm : 0.37 kW : 1.5 kW : 0.12 kW : 1730 mm : 770 mm : 1460 mm : 476 kg DIGITAL ANGLE READ OUT blade brush control panel swivel frame infinitely adjustable lowering with hydraulic cylinder hydraulic lifting of the saw frame quick lowering with automatic switchover to working speed using a sensor pin mech. Vice with quick clamping coolant equipment machine base chip collecting tray user manualin GERMAN or ENGLISH OPTIONS: Roller tables and band saw blades on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 080198 : prompt, Zwischenverkauf v : Türkei : 106178 € : 1806.84 € : 1 : 95600 € : 175 to : 3050 mm : Y1 / Y2 / X / R Achse : 265 mm : 2600 mm : 410 mm : 530 mm : hydraulisch : 200 mm/s : 10 mm/s : 200 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 104 mm : 2 x 4 kW : 4250 mm : 1700 mm : 2750 mm : 10900 kg 1 SERVO MOTOR AND PUMP PER CYLINDER Standard accessories: 4 axes (Y1, Y2,X and R) Color graphics control Delem DA 66 S - 2D graphical touch screen programming mode - 3D machine representation, in simulation and production - 24", high resolution color TFT - Delem Modusys compatibility (module scalability and adaptivity) - USB, peripheral interfacing - User specific application support within the control&apos,s multitasking environment - Sensor bending &, correction interface - Profile-S2D offline software servo motorized back gauge on linear guides and ball sc ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 193000 € : 3647.7 € : 6080 mm : 13 mm : 10 mm : 350 mm : 10 1/min : 0.5 - 2.5 ° : 29 : 58 to : 1000 mm : 200 mm/s : 37 kW : 400 l : 6 Stk. : 950 mm : 650 mm : 6375 mm : 7400 mm : 2200 mm : 3700 mm : 2900 mm : 33820 kg linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 6 support arms wit T-slots oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH PRICE FCA TURKEY (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 20700 € : 397.44 € : 150 to : fix : 1000 mm : 300 mm : 1020 mm : 610 mm : 9 mm/s : 5 mm/s : 10 mm/s : 8 mm : 600x1020 mm : 100 mm : 190 mm : 2110 mm : 1000 mm : 2450 mm : 2400 kg 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position manuel and 2 hand working Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 292300 € : 600 to : 6050 mm : Y1 / Y2 / X und R Achse : 365 mm : 5100 mm : 510 mm : 700 mm : hydraulisch : 80 mm/s : 6,5 mm/s : 80 mm/s : 750 mm : 280 l : 2 x 11 kW kW : 7600 mm : 2650 mm : 3950 mm : 52500 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 19100 € : 366.72 € : 4000 kg : 1300 mm : 450 - 550 mm : 600 mm : 50 mm : 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 18200 € : 349.44 € : 100 to : 1500 mm : 300 mm : 7.5 kW : 2630 mm : 1000 mm : 2275 mm : 2500 kg : 1 : 680 mm : 1520 mm : 5 mm/s : 10 mm/s : 6 mm : 100 mm : 190 mm 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand operating panel height adjustable table user manual in Germanand English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 20700 € : 397.44 € : 150 to : 1000 mm : 300 mm : 11 kW : 2110 mm : 1000 mm : 2450 mm : 2400 kg : 1 : 610 mm : 1020 mm : 5 mm/s : 10 mm/s : 8 mm : 100 mm : 190 mm 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position manuel and 2 hand working height adjustable table user manual in Germanand English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 33000 € : 630.3 € : 2530 mm : 6 mm : 6 mm : 4 mm : 190 mm : 5.5 kW : 4250 mm : 1200 mm : 1150 mm : 3750 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 112813 € : 2132.17 € : 320 to : 3050 mm : Y1 / Y2 / X Achse : 365 mm : 2600 mm : 450 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 154 mm : 250 l : 37 kW : 4300 mm : 1820 mm : 3330 mm : 17100 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 88113 € : 1665.34 € : 220 to : 3050 mm : Y1 / Y2 / X Achse : 265 mm : 2600 mm : 450 mm : 530 mm : hydraulisch : 140 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 250 l : 22 kW : 4250 mm : 1770 mm : 3000 mm : 12600 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 63320 € : 1196.75 € : 100 to : 2550 mm : Y1 / Y2 / X Achse : 265 mm : 2200 mm : 450 mm : 530 mm : hydraulisch : 180 mm/s : 10 mm/s : 120 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 100 l : 11 kW : 3800 mm : 1670 mm : 2850 mm : 7800 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CN ...

: neu : 2023 : 8286 : prompt, Zwischenverkauf v : Türkei : 2990 € : 1 : 2040 mm : 0.8 mm : 70 ° : 2400 mm : 750 mm : 850 mm : 290 kg straight upper tool moveable manual cutting device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 69320 € : 1310.15 € : 100 to : 3050 mm : Y1 / Y2 / X Achse : 265 mm : 2600 mm : 450 mm : 530 mm : hydraulisch : 180 mm/s : 10 mm/s : 120 mm/s : 500 mm/s : 900 mm : 104 mm : 11 kW : 4200 mm : 1670 mm : 2850 mm : 8500 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC CONTROLLED CROWNING TABLE  ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 74800 € : 1413.72 € : 40 to : 2050 mm : Y1 / Y2 / X und R Achse : 200 mm : 1700 mm : 350 mm : 440 mm : servomotorischer Spindela : 180 mm/s : 10 mm/s : 115 mm/s : 650 mm : 250 mm : 1000 mm : 7.2 kW : 2600 mm : 1450 mm : 2650 mm : 4400 kg STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66S - 17 ", Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guid ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 82900 € : 1566.81 € : Doppelsäulenführung : 8400x54x1,6 mm : 20-100 m/min : 650 mm : 1000 x 600 mm : rechteck 660 x 600 mm : rechteck 440 x 600 mm : rechteck 660 x 600 mm : 880 mm : 4 kW : 7.5 kW : 0.12 kW : 4400 mm : 2270 mm : 2660 mm : 6520 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH The data for this ad was crea ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 163101 € : 3082.61 € : 2000x6000 mm : Hypertherm XPR 170 CORE : 60 mm : 38 mm : 38 mm : 35 mm : 22 mm : 25 mm : 170 A : 12 m/min : 35 m/min : +/- 0,1 mm : 0,1 mm : 6000 kg HyPerformance plasma power sourceHyperthermXPR 170 COREWITH ",TRUE HOLE", TECHNOLOGY Automatic gas console Plasma torch height control Collision protection (torch brake away system) CNC control with Aurora Software Lantek CAD/CAM software with auto nesting Control of filter unit by CNC Remote control diagnostic by Ethernet Cutting plate alignment function User manual in GERMAN or ENGLISH Options: Suction with filter Morepricefor Optimix instead of Core Further options as CNC bevel head, drilling head, oxyfuel torch, Durma cloud etc. on request. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 70300 € : 1328.67 € : 3100 mm : 8 mm : 8 mm : 6 mm : 6 mm : 5 mm : 240 mm : 240 mm : 190 mm : 825 mm : 11 kW : 4880 mm : 1160 mm : 1200 mm : 6450 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls ar ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 100920 € : 1907.39 € : 220 to : 4050 mm : Y1 / Y2 / X Achse : 265 mm : 3600 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 250 l : 22 kW : 5250 mm : 1770 mm : 3000 mm : 14750 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on ...

: neu : ca. 4-6 Monate ab Auftrag : Türkei : 30900 € : 590.19 € : Doppelsäulenführung : 6000x41x1,3 mm : 20-100 m/min : 560 mm : 560 mm : 570x560 mm : 590 mm : 1.1 kW : 4 kW : 0.12 kW : 500 mm : 1050 mm : 2050 mm : 2242 kg NC control double column band saw 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tension inverter linear way optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch gearbox user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Türkei : 12900 € : 247.68 € : 40 to : 285 mm : 200x24 mm : 660x1250 mm : 250 mm : 80 mm : 10 mm/s : 10 mm/s : 4 kW : 930 mm : 1250 mm : 650 mm : 1250 mm : 1100 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 53900 € : 1018.71 € : Doppelsäulenführung : 7000x41x1,3 mm : 15 - 120 m/min : 560 mm : 540 mm : 810 x 530 mm : rund 520 mm, quadrat 520 : rund 520 mm, quadrat 520 : rund 330 mm, quadrat 330 : 875 mm : 1.1 kW : 4 kW : 0.12 kW : 3850 mm : 1700 mm : 2450 mm : 3400 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller  ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 46700 € : 891.97 € : Doppelsäulenführung : 8200x41x1,3 mm : 20-100 m/min : 810 mm : 750 mm : 910x750 mm : rund 600 mm, quadrat 600 : rund 360 mm, quadrat 360 : 725 mm : 4 kW : 0.12 kW : 4020 mm : 1600 mm : 2450 mm : 3970 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment hydraulic uplift of sawing frame user manual in GERMAN or ENGLISH OPTIONS: Hydraulic vertical clamping Micro cooli ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 187100 € : 3536.19 € : 400 to : 4050 mm : Y1 / Y2 / X und R Achse : 365 mm : 3400 mm : 410 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 160 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 154 mm : 2 x 11 kW : 5750 mm : 2110 mm : 3450 mm : 27780 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup a ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 137900 € : 2606.31 € : 220 to : 6050 mm : Y1 / Y2 / X Achse : 265 mm : 5100 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 1050 mm : 154 mm : 250 l : 22 kW : 7500 mm : 1770 mm : 3350 mm : 20800 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 45100 € : 861.41 € : Doppelsäulenführung : 5200x34x1,1 mm : 20-100 m/min : 360 mm : 360 mm : 610x360 mm : rund 360 mm, quadrat 360 : rund 360 mm, quadrat 360 : rund 325 mm, quadrat 265 : 735 mm : 1.5 kW : 3 kW : 0.12 kW : 2850 mm : 2250 mm : 1870 mm : 2400 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 360 CGS NC (with servo instead of hyraulic feed) € 50.900,-- The data for this ad was created with ModulMWS - the softwa ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 95000 € : 1795.5 € : 3100 mm : 13 mm : 12 mm : 8 mm : 13 mm : 10 mm : 10 mm : 8 mm : 270 mm : 270 mm : 230 mm : 50 mm : 1155 mm : 15 kW : 5310 mm : 1660 mm : 1590 mm : 10050 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software  ...

: neu : 2026 : 070217 : Juni 2026, Zwischenverkau : Türkei : 4800 € : 500 kg : 1200 mm : 400 mm : 550 mm : 300 mm : 50 mm : 80 mm : 0.55 kW : 1400 mm : 1200 mm : 1550 mm : 190 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 72800 € : 1375.92 € : Doppelsäulenführung : 9500x54x1,6 mm : 20-100 m/min : 1020 mm : 1020 mm : 1020x1020 mm : rund 675 mm, quadrat 675 : 535 mm : 2.2 kW : 7.5 kW : 0.12 kW : 4500 mm : 1700 mm : 2750 mm : 5860 kg blade brush control panel hydraulic vice hydraulic blade tension inverter linear ways height adjustment by optical sensor automatic adjustment of blade guide arm, syncrounos to vice movement senitive pressure adjustment coolant pump saw blade user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping chip conveyer turn table for turning the machine for mitre cutting roller tables and band saw blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 38700 € : 739.17 € : Doppelsäulenführung : 8200x41x1,3 mm : 20-100 m/min : 810 mm : 810 mm : 850x810 mm : rund 480 mm, quadrat 480 : 585 mm : 1.5 kW : 4 kW : 0.12 kW : 3900 mm : 1200 mm : 2350 mm : 3080 kg 2° inlined saw band optical height adjustment linear guides control panel security switch pressure adjustment hydraulic vice chip brush hydromechanical blade tensioning coolant pump heavy duty gearbox 1,2 m roller table user manual in GERMAN or ENGLISH OPTIONS: turn table for mitre cuts hydraulic top clamping from above roller tables and band saw blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090132 : prompt, Zwischenverkauf v : Türkei : 47500 € : 798.38 € : 1 : 41800 € : 3100 mm : 6 mm : 4 mm : 50 mm : 15 1/min : 1.5 ° : 16 : 14 to : 1000 mm : 200 mm/s : 15 kW : 200 l : 2 Stk. : 865 mm : 500 mm : 3515 mm : 4110 mm : 2200 mm : 3700 mm : 2100 mm : 7300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Var ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 59600 € : 1126.44 € : 3100 mm : 10 mm : 6 mm : 50 mm : 13 1/min : 1.5 ° : 16 : 22 to : 1000 mm : 200 mm/s : 22 kW : 200 l : 2 Stk. : 865 mm : 580 mm : 3515 mm : 4200 mm : 2250 mm : 3600 mm : 2100 mm : 9300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12100 € : 232.32 € : 2500 kg : 1300 mm : 450 mm : 550 mm : 600 mm : 50 mm : 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (PRICES ON REQUEST): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 27700 € : 529.07 € : Doppelsäulenführung : 6000x41x1,3 mm : 20-100 m/min : 560 mm : 560 mm : 750x560 mm : rund 410 mm, quadrat 410 : 590 mm : 1.1 kW : 4 kW : 0.12 kW : 3400 mm : 1000 mm : 2050 mm : 2045 kg 2° inclined band linear guides control panel material limit shaft coolant pump 1200 mm roller table hydraulic vice hydromechanic band tensioning inverter presser adjustment band brush optical height adjustment security switch operating manual in Englisch OPTION: turn table for mitre cuts hydraulic top clamping from above micro cooling unit laser cutting line The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 23800 € : 456.96 € : Doppelsäulenführung : 5200x41x1,3 mm : 20-100 m/min : 460 mm : 460 mm : 650x460 mm : rund 380 mm, quadrat 380 : 590 mm : 0.55 kW : 4 kW : 0.12 kW : 3100 mm : 1000 mm : 1800 mm : 1520 kg blade brush control panel hydraulic vice hydromechanical blade tension inverter linear way material limit shaft height adjustment pressure adjustment coolant pump saw blade security switch gearbox 1,2 meter roller table user manual in GERMAN or ENGLISH OPTION: turn table for mitre cuts hydraulic top clamping from above The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 46400 € : 886.24 € : Doppelsäulenführung : 6800x41x1,3 mm : 20-100 m/min : 560 mm : 820 x 540 mm : rechteck 550 x 540 mm : rechteck 360 x 540 mm : rechteck 550 x 540 mm : 880 mm : 1.1 kW : 4 kW : 0.12 kW : 3800 mm : 1750 mm : 2350 mm : 3200 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller table see photo - option ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 86300 € : 1631.07 € : 150 to : 300 mm : 950x650 mm : 1200x750 mm : 550 mm : 100 mm/s : 5,5 mm/s : 165 mm/s : 11 kW : 2200 mm : 2200 mm : 3250 mm : 8200 kg 4-pillar guide table and ram with T-slots manual stroke adjustment via cam switch manual and automatic operation front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 57920 € : 1094.69 € : 60 to : 2050 mm : 3 (Y1, Y2, X) : 265 mm : 1700 mm : 450 mm : 530 mm : hydraulisch : 200 mm/s : 10 mm/s : 110 mm/s : 650 mm : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 100 l : 7.5 kW : 3200 mm : 1550 mm : 2850 mm : 5600 kg : 650 mm 3 axes (Y1, Y2,X ) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double l ...

: neu : 2026 : 070155 : prompt, Zwischenverkauf v : Türkei : 6900 € : 133.17 € : 1 : 500 kg : 1200 mm : 400 mm : 550 mm : 300 mm : 80 mm : 1450 mm : 1200 mm : 1640 mm : 260 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control PNEUMATIC PRESSURE ARM ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 61900 € : 1169.91 € : Doppelsäulenführung : 6000x41x1,3 mm : 20-100 m/min : 540 mm : 540 mm : 670x540 mm : rund 540 mm, quadrat 540 : rund 510 mm, quadrat 510 : rund 270 mm, quadrat 250 : 805 mm : 2.2 kW : 4 kW : 0.12 kW : 3100 mm : 2350 mm : 2150 mm : 3800 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 540 CGS NC (with servo instead of hyraulic feed) € 70.200,-- The data for this ad was created with ModulMWS - the softw ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 10900 € : 209.28 € : 1250 kg : 1300 mm : 450 - 550 mm : 400 mm : 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control with pneumatic downholer Alternatives (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 197600 € : 3734.64 € : 400 to : 6050 mm : 3 : 365 mm : 5100 mm : 510 mm : 630 mm : hydraulisch : 120 mm/s : 8 mm/s : 100 mm/s : 750 mm : 350 mm/s : 300 mm/s : 250 mm : 1220 mm : 154 mm : 500 l : 37 kW : 7500 mm : 2110 mm : 3810 mm : 34660 kg 3 axes (Y1, Y2, X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC cr ...

: neu : 2025 : 090080 : prompt, Zwischenverkauf v : Türkei : 32100 € : 613.11 € : 1 : 3100 mm : 4 mm : 42 1/min : 1,5 ° : 750 mm : 7.5 kW : 2 Stk. : 800 mm : 450 mm : 3700 mm : 2300 mm : 1350 mm : 3730 kg mot. back gauge with digitalreadout DT 5 hold down with rubber pads side lay with T-sluts 2 supporting arms ball in the table tape measure tilt stop light barriers on the back of the machine cutting line illumination user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.