hesse by bekamak saws used for sale

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 46400 € : 886.24 € : Doppelsäulenführung : 6800x41x1,3 mm : 20-100 m/min : 560 mm : 820 x 540 mm : rechteck 550 x 540 mm : rechteck 360 x 540 mm : rechteck 550 x 540 mm : 880 mm : 1.1 kW : 4 kW : 0.12 kW : 3800 mm : 1750 mm : 2350 mm : 3200 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller table see photo - option ...

: neu : 2025 : 060077 : prompt, Zwischenverkauf v : Türkei : 14200 € : 272.64 € : 1 : 1 : Schwenkrahmen : 4160x34x1,1 mm : 15 - 120 m/min : 320 mm : 320 mm : 450x320 mm : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 300 : rund 230 mm, quadrat 220 : 860 mm : 0.37 kW : 2.2 kW : 0.12 kW : 2230 mm : 1150 mm : 2140 mm : 1030 kg Double mitre cutting Inverter Saw blade 34 Hydraulic vice Heavy duty gearbox Hydromechanic blade tension Saw band brush Digital read out for mitre angle Coolant equipment Operating manual in English or German OPTIONS: Roller tables and band saw blades on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 27700 € : 529.07 € : Doppelsäulenführung : 6000x41x1,3 mm : 20-100 m/min : 560 mm : 560 mm : 750x560 mm : rund 410 mm, quadrat 410 : 590 mm : 1.1 kW : 4 kW : 0.12 kW : 3400 mm : 1000 mm : 2050 mm : 2045 kg 2° inclined band linear guides control panel material limit shaft coolant pump 1200 mm roller table hydraulic vice hydromechanic band tensioning inverter presser adjustment band brush optical height adjustment security switch operating manual in Englisch OPTION: turn table for mitre cuts hydraulic top clamping from above micro cooling unit laser cutting line The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4-6 Monate ab Auftrag : Türkei : 12200 € : 234.24 € : Schwenkrahmen : 3660x27x0,9 mm : 20-100 m/min : 320 mm : 300 mm : 320x300 mm : 640 mm : 0.37 kW : 2 kW : 0.12 kW : 1900 mm : 850 mm : 1300 mm : 770 kg Roller material feed with encoder and NC control blade brush control panel height adjustment bar with limit switch hydromechanical blade tension inverter hydraulic vice coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 29800 € : 569.18 € : Schwenkrahmen : 3660x27x0,9 mm : 15-120 m/min : 320 mm : 320 mm : 350x320 mm : rund 170 mm, quadrat 150 : rund 260 mm, quadrat 220 : rund 320 mm, quadrat 280 : 740 mm : 1.1 kW : 2.2 kW : 1 kW : 0.12 kW : 2120 mm : 2100 mm : 1810 mm : 1810 kg NC control panel servo feed with ballscrew spindles hydraulic vice hydromechanical blade tension inverter coolant pump saw blade blade brush security switch height adjustment user manual in GERMAN or ENGLISH OPTION: hydraulic blade tentioning The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 38700 € : 739.17 € : Doppelsäulenführung : 8200x41x1,3 mm : 20-100 m/min : 810 mm : 810 mm : 850x810 mm : rund 480 mm, quadrat 480 : 585 mm : 1.5 kW : 4 kW : 0.12 kW : 3900 mm : 1200 mm : 2350 mm : 3080 kg 2° inlined saw band optical height adjustment linear guides control panel security switch pressure adjustment hydraulic vice chip brush hydromechanical blade tensioning coolant pump heavy duty gearbox 1,2 m roller table user manual in GERMAN or ENGLISH OPTIONS: turn table for mitre cuts hydraulic top clamping from above roller tables and band saw blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 060214 : Juni 2026, Zwischenverkau : Türkei : 7700 € : 148.61 € : Schwenkrahmen : 2730x27x0,9 mm : 35/70 m/min : 230 mm : 230 mm : 320x130 mm : rund 210 mm, quadrat 190 : rund 130 mm, quadrat 100 : rund 180 mm, quadrat 150 : 805 mm : 0.37 kW : 1.3 kW : 0.12 kW : 1350 mm : 700 mm : 1300 mm : 430 kg swivel frame infinitely adjustable lowering with hydraulic cylinder hydraulic lifting of the saw frame mechanical vice with quick clamping coolant equipment machine base chip collecting tray user manual in GERMAN or ENGLISH OPTIONS: Roller tables and band saw blades on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 72800 € : 1375.92 € : Doppelsäulenführung : 9500x54x1,6 mm : 20-100 m/min : 1020 mm : 1020 mm : 1020x1020 mm : rund 675 mm, quadrat 675 : 535 mm : 2.2 kW : 7.5 kW : 0.12 kW : 4500 mm : 1700 mm : 2750 mm : 5860 kg blade brush control panel hydraulic vice hydraulic blade tension inverter linear ways height adjustment by optical sensor automatic adjustment of blade guide arm, syncrounos to vice movement senitive pressure adjustment coolant pump saw blade user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping chip conveyer turn table for turning the machine for mitre cutting roller tables and band saw blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 060216 : Juni 2026, Zwischenverkau : Türkei : 20700 € : 397.44 € : Schwenkrahmen : 5200x34x1,1 mm : 20-100 m/min : 440 mm : 440 mm : 610x440 mm : rund 410 mm, quadrat 410 : rund 320 mm, quadrat 250 : rund 410 mm, quadrat 410 : rund 320 mm, quadrat 285 : 860 mm : 0.55 kW : 3 kW : 0.12 kW : 2800 mm : 1210 mm : 1870 mm : 1540 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or EN ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 29800 € : 569.18 € : Doppelsäulenführung : 5400x41x1,3 mm : 20-100 m/min : 450 mm : 425 mm : 695 x 425 mm : rund 430 mm, quadrat 425 : rund 320 mm, quadrat 290 : 690 mm : 0.55 kW : 4 kW : 0.12 kW : 3090 mm : 1200 mm : 1940 mm : 1630 kg double linear guides hydraulic-mechanical bandtension saw bandbrush infinitely variable cutting speed sensitive cut regulation bi-metal saw band 41 coolant device thermal overload protection heavy duty gear optical height adjustment 3 ° inclined band hydraulic clamping of the vice user manual in GERMAN or ENGLISH OPTIONS: hydraulic vertical clamping micro cooling unit chip conveyer laser cutting line The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 53900 € : 1018.71 € : Doppelsäulenführung : 7000x41x1,3 mm : 15 - 120 m/min : 560 mm : 540 mm : 810 x 530 mm : rund 520 mm, quadrat 520 : rund 520 mm, quadrat 520 : rund 330 mm, quadrat 330 : 875 mm : 1.1 kW : 4 kW : 0.12 kW : 3850 mm : 1700 mm : 2450 mm : 3400 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller  ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 45100 € : 861.41 € : Doppelsäulenführung : 5200x34x1,1 mm : 20-100 m/min : 360 mm : 360 mm : 610x360 mm : rund 360 mm, quadrat 360 : rund 360 mm, quadrat 360 : rund 325 mm, quadrat 265 : 735 mm : 1.5 kW : 3 kW : 0.12 kW : 2850 mm : 2250 mm : 1870 mm : 2400 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 360 CGS NC (with servo instead of hyraulic feed) € 50.900,-- The data for this ad was created with ModulMWS - the softwa ...

: neu : ca. 4-6 Monate ab Auftrag : Türkei : 30900 € : 590.19 € : Doppelsäulenführung : 6000x41x1,3 mm : 20-100 m/min : 560 mm : 560 mm : 570x560 mm : 590 mm : 1.1 kW : 4 kW : 0.12 kW : 500 mm : 1050 mm : 2050 mm : 2242 kg NC control double column band saw 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tension inverter linear way optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch gearbox user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 61900 € : 1169.91 € : Doppelsäulenführung : 6000x41x1,3 mm : 20-100 m/min : 540 mm : 540 mm : 670x540 mm : rund 540 mm, quadrat 540 : rund 510 mm, quadrat 510 : rund 270 mm, quadrat 250 : 805 mm : 2.2 kW : 4 kW : 0.12 kW : 3100 mm : 2350 mm : 2150 mm : 3800 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 540 CGS NC (with servo instead of hyraulic feed) € 70.200,-- The data for this ad was created with ModulMWS - the softw ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 50900 € : 962.01 € : Doppelsäulenführung : 5750 x 41 x 1,3 mm : 20 - 120 m/min : 420 mm : 420 mm : 420 x 420 mm : 805 mm : 1.1 kW : 5.5 kW : 1 kW : 0.12 kW : 2860 mm : 1980 mm : 2100 mm : 3700 kg Servo feed with 700 mm stroke Cutting length up to 9,999 mm (multiple feeds) Omron touchscreen, 50 different cutting lengths and 30 programs can be saved Linear guide 41 mm saw blade Control panel Hydraulic vice Hydromechanical blade tension Heavy duty gearbox Coolant device Sensitive pressure Inverter for stepless blade speed Chip brush Optical height adjustment Chip conveyor Operating instructions in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 82900 € : 1566.81 € : Doppelsäulenführung : 8400x54x1,6 mm : 20-100 m/min : 650 mm : 1000 x 600 mm : rechteck 660 x 600 mm : rechteck 440 x 600 mm : rechteck 660 x 600 mm : 880 mm : 4 kW : 7.5 kW : 0.12 kW : 4400 mm : 2270 mm : 2660 mm : 6520 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH The data for this ad was crea ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 61300 € : 1158.57 € : Doppelsäulenführung : 6000 x 41 x 1,3 mm : 20 - 100 m/min : 560 mm : 560 mm : 600 x 560 mm : 810 mm : 2.2 kW : 5.5 kW : 0.12 kW : 3250 mm : 2200 mm : 2350 mm : 4500 kg Hydromechanical band tension Continuously variable bandspeed (inverter) Linear guide Feed vice with servo drive with 700 mm stroke or 9.999 mm for multi-stroke Control panel with touchscreen (50 cutting lengths / 30 programs) Planetary gearbox Saw pressure adjustment Band deflection sensor Coolant device Chip brush Optical height adjustment OPTIONEN: Hydraulicupper clamping Micro cooling unit Roller table3 m Laser cutting line The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Hydraulic clamping - Roller conveyor 1200 x 350 mm - Extra saw band blade - Electric stop  - Coolant system - Hydraulic vice - Hydraulic in feed roller drive 

Key data: 3100 mm, 16 mm

- Year of construction 2001 Specifications - Cutting length: 3100 mm - Capacity: 16 mm - Stroke: 170 mm - Stroke rate: 10 /min - Oil tank: 410 l - Engine power: 37 kW - Operating voltage: 400 V - Rated current: 72 A - Rated current main fuse: 100 A - Dimensions WxHxD: 3750 x 2400 x 3425 mm - Weight: 13800 kg

This Hesse AD-S 30175 press brake was manufactured in 2017. It features a robust 3050 x 175 TON capacity, a stroke of 265 mm, and operates on a supply voltage of 3 x 400 Volt. Weighing 10830 kg, it ensures stability and precision in operation. If you are looking to get high-quality bending capabilities, consider the Hesse AD-S 30175 machine we have for sale. Contact us for more information.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 54900 € : 1037.61 € : Doppelsäulenführung : 5400x41x1,3 mm : 20-100 m/min : 440 mm : 440 mm : 610x440 mm : rund 440 mm, quadrat 440 : rund 430 mm, quadrat 430 : rund 320 mm, quadrat 260 : 807,5 mm : 1.1 kW : 4 kW : 0.12 kW : 2850 mm : 2350 mm : 2000 mm : 3600 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 440 CGS NC (with servo instead of hyraulic feed) € 61.900,-- The data for this ad was created with ModulMWS - the sof ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 193000 € : 3647.7 € : 6080 mm : 13 mm : 10 mm : 350 mm : 10 1/min : 0.5 - 2.5 ° : 29 : 58 to : 1000 mm : 200 mm/s : 37 kW : 400 l : 6 Stk. : 950 mm : 650 mm : 6375 mm : 7400 mm : 2200 mm : 3700 mm : 2900 mm : 33820 kg linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 6 support arms wit T-slots oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH PRICE FCA TURKEY (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 7700 € : 148.61 € : 80 to : horizontal verschiebbar : 250 mm : 1040 mm : 865 mm : 200x120 mm : 5 mm/s : 10 mm/s : 1710 mm : 700 mm : 2100 mm : 835 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 11100 € : 213.12 € : Schwenkrahmen : 3660x27x0,9 mm : 20-100 m/min : 320 mm : 300 mm : 320x300 mm : 640 mm : 0.37 kW : 2.2 kW : 0.12 kW : 1900 mm : 850 mm : 1300 mm : 770 kg Roller material feed with manual adjustable length stop with limit switch blade brush control panel height adjustment bar with limit switch hydromechanical blade tension inverter hydraulic vice coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 63320 € : 1196.75 € : 100 to : 2550 mm : Y1 / Y2 / X Achse : 265 mm : 2200 mm : 450 mm : 530 mm : hydraulisch : 180 mm/s : 10 mm/s : 120 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 100 l : 11 kW : 3800 mm : 1670 mm : 2850 mm : 7800 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CN ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 145000 € : 2740.5 € : 6080 mm : 6 mm : 4 mm : 350 mm : 10 1/min : 0.5 - 2 ° : 29 : 20 to : 1000 mm : 200 mm/s : 22 kW : 200 l : 5 Stk. : 900 mm : 630 mm : 6370 mm : 7300 mm : 2150 mm : 3400 mm : 2750 mm : 25500 kg linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port CNC controlled cutting gap adjustment by the table (patented) oil cooler manual central lubrication cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 5 support arms wit T-slots oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH PRICE FCA TURKEY (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 34200 € : 653.22 € : 100 mm : 315 mm : 3 : 7.5 kW : 7 m/min : 100x20 mm / 800 mm, 30x10 : 200x30 mm / 1.200 mm, 160 : 60x60 mm / 750 mm, 15x15 : Ø 75 mm / 800 mm, Ø 15 mm : Ø 125x2,5 mm / 1.400 mm, : 100x40x4 mm / 1.300 mm, 2 : 80x80x5 mm / 1.500 mm, 25 : 100x100x12 mm / 1.000 mm, : 100x100x10 mm / 1.000 mm, : UPN 180 / 900 mm, UPN 30 : UPN 180 / 1.000 mm, UPN 3 : IPN 180 / 1.000 mm, IPN 8 : 1465 mm : 2000 mm : 1700 mm : 4000 kg 3 hydr. driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rollspositions on seperate control panel lateral rolls adjustable in 3 axes horizontal and vertical operation for- and backward drive machine and equipment according to theCE regulations WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoT ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 171300 € : 2753.73 € : 145700 € : 400 to : 4050 mm : Y1 / Y2 / X Achse : 365 mm : 3400 mm : 510 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 1050 mm : 154 mm : 250 l : 37 kW : 5750 mm : 2110 mm : 3640 mm : 27760 kg Special campaign Special price and SKY 22 control free of charge 3 axes (Y1, Y2,X) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Et ...

: gebraucht : 2022 : 8254 : prompt, Zwischenverkauf v : Türkei : 22240 € : 1 : 30 to : 1250 mm : X und Y Achse : 150 mm : 1010 mm : 255 mm : 265 mm : hydraulisch : 210 mm/s : 10 mm/s : 3 kW : 1760 mm : 1375 mm : 2135 mm : 1700 kg DEMO MACHINE, MINT CONDITION NC control for immersion depth (Y) and back gauge (X) synchronization control by means of a torsion shaft sheet support arms light barriers die seat and die die seat with 4 V openings split upper tool, slightly cranked, divided pedal user manual in GERMAN incl. laser protection device Fiessler (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2021 : 90004 : prompt, Zwischenverkauf v : Türkei : 22600 € : 1 : 3100 mm : 4 mm : 42 1/min : 1,5 ° : 750 mm : 7,5 kW : 2 Stk. : 800 mm : 450 mm : 3700 mm : 2300 mm : 1350 mm : 3730 kg mot. back gauge with digitalreadout DT 5 hold down with rubber pads side lay with T-sluts 2 supporting arms balls in the table tilt stop light barriers on the back of the machine cutting line illumination user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 18200 € : 349.44 € : 100 to : 1500 mm : 300 mm : 7.5 kW : 2630 mm : 1000 mm : 2275 mm : 2500 kg : 1 : 680 mm : 1520 mm : 5 mm/s : 10 mm/s : 6 mm : 100 mm : 190 mm 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand operating panel height adjustable table user manual in Germanand English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 11800 € : 226.56 € : 1270 mm : 4 mm : 120 mm : 3 m/min : 2.2 kW : 2470 mm : 750 mm : 1000 mm : 1110 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.250,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 25700 € : 490.87 € : 15 to : 1.4 mm : 320 mm : 490 mm : 130 mm : 1 - 40 mm : 200 1/min : 4 : 40 mm : 30 mm : 210 mm : 215 mm : 1.5 kW : 1160 mm : 1180 mm : 1730 mm : 922 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operation Touchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 53700 € : 1014.93 € : 2050 mm : 16 mm : 16 mm : 13 mm : 13 mm : 10 mm : 260 mm : 260 mm : 200 mm : 1,5 / 6 m/min : 7.5 kW : 4300 mm : 1600 mm : 1550 mm : 6100 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60  ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 98300 € : 1857.87 € : 135 to : 3050 mm : Y1 / Y2 / X und R Achse : 265 mm : 2600 mm : 410 mm : 530 mm : hydraulisch : 200 mm/s : 10 mm/s : 200 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 104 mm : 2x4 kW : 4200 mm : 1680 mm : 2750 mm : 9500 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and pr ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 60600 € : 1145.34 € : 3100 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 260 mm : 260 mm : 200 mm : 1,5 / 6 m/min : 7.5 kW : 5350 mm : 1600 mm : 1550 mm : 7685 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % o ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 13800 € : 264.96 € : 1550 mm : 4 mm : 140 mm : 3,5 m/min : 2.2 kW : 2700 mm : 750 mm : 1000 mm : 1420 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 111500 € : 2107.35 € : 3100 mm : 20 mm : 20 mm : 16 mm : 16 mm : 12 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 6000 mm : 2200 mm : 1900 mm : 15000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommend ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 48000 € : 916.8 € : 6 mm : 4 mm : 70 mm : 4000 mm : 550 mm : 8.75 kW : 4250 mm : 720 mm : 2000 mm : 2015 kg Easy operation with mobile control panel with push buttons Built according to EC Safety Directives and has CE Mark One set of flanging rolls included. Radius can be selected. One set of cutting blades included Min. cutting diameter: 600 mm (with adapter for small diameter 400 mm) Min. flanging diameter: 550 mm (with adapter for small diameter 350 mm) Rotating speed 70 rpm with adjustable max. torque Top and bottom flanging rolls powered in rotation with planetary reducers Hydraulically adjustable bottom head for both, flat and crowned dish flanging Both cutting and flanging operation on the same head Users Manual Optional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diamet ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 12700 € : 243.84 € : 1270 mm : 5 mm : 140 mm : 3,5 m/min : 2.2 kW : 2470 mm : 750 mm : 1000 mm : 1350 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.500,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 6700 € : 129.31 € : 1550 mm : 2 mm : 90 mm : 6 m/min : 1.5 kW : 2130 mm : 700 mm : 1200 mm : 545 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN or ENGLISH OPTIONS: powered back roll EUR 1.000,- digital readout EUR 1.100,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 92100 € : 1740.69 € : 3100 mm : 16 mm : 10 mm : 350 mm : 10 1/min : 2 ° : 14 : 61 to : 1000 mm : 200 mm/s : 37 kW : 410 l : 2 Stk. : 818 mm : 550 mm : 3580 mm : 4550 mm : 2250 mm : 3825 mm : 2250 mm : 15000 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglengt ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 159300 € : 3010.77 € : 320 to : 4050 mm : Y1 / Y2 / X und R Achse : 365 mm : 3600 mm : 410 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 160 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 154 mm : 5300 mm : 1910 mm : 3230 mm : 20100 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm  ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 23800 € : 456.96 € : Doppelsäulenführung : 5200x41x1,3 mm : 20-100 m/min : 460 mm : 460 mm : 650x460 mm : rund 380 mm, quadrat 380 : 590 mm : 0.55 kW : 4 kW : 0.12 kW : 3100 mm : 1000 mm : 1800 mm : 1520 kg blade brush control panel hydraulic vice hydromechanical blade tension inverter linear way material limit shaft height adjustment pressure adjustment coolant pump saw blade security switch gearbox 1,2 meter roller table user manual in GERMAN or ENGLISH OPTION: turn table for mitre cuts hydraulic top clamping from above The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 080186 : prompt, Zwischenverkauf v : Türkei : 81476 € : 1309.77 € : 1 : 69300 € : 135 to : 3050 mm : Y1 / Y2 / X und RAchse : 265 mm : 2600 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 120 mm/s : 500 mm : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 150 l : 15 kW : 4250 mm : 1700 mm : 2850 mm : 9580 kg Special campaign Special price and SKY 22 control free of charge Standard accessories: 4 axes (Y1, Y2,X and R) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and  ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 97400 € : 1840.86 € : 2050 mm : 30 mm : 30 mm : 25 mm : 25 mm : 20 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5000 mm : 2000 mm : 1900 mm : 11000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommende ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 32480 € : 620.37 € : 1550 mm : 9 mm : 9 mm : 7 mm : 7 mm : 5 mm : 180 mm : 180 mm : 150 mm : 1,5 / 6 m/min : 5.5 kW : 3900 mm : 1150 mm : 1250 mm : 3250 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT (PRICES ON REQUEST): infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened roll ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 11500 € : 220.8 € : 150 to : fix : 300 mm : 1570 mm : 280x200 mm : 5 mm/s : 10 mm/s : 2500 mm : 1000 mm : 2270 mm : 2100 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 52500 € : 992.25 € : 60 to : 250 mm : 500x430 mm : 750x500 mm : 450 mm : 26 mm/s : 8,5 mm/s : 47 mm/s : 7.5 kW : 1820 mm : 960 mm : 2400 mm : 4000 kg 2-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 28300 € : 540.53 € : 40 to : 2000 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 2500 mm : 1200 mm : 1900 mm : 2100 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090204 : Mai 2026, Zwischenverkauf : Türkei : 4290 € : 1250 mm : 1.5 mm : 500 mm : 2250 mm : 1000 mm : 1150 mm : 460 kg DEMO MACHINE - MINT CONDITION welded steel construction with manual hold down unit back gauge adjustable by handwheel users manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 34400 € : 657.04 € : Doppelsäulenführung : 6000x41x1,3 mm : 20-100 m/min : 540 mm : 540 mm : 750x540 mm : rund 510 mm, quadrat 450 : rund 270 mm, quadrat 250 : 695 mm : 4 kW : 0.12 kW : 3000 mm : 1300 mm : 2150 mm : 2445 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment hydraulic uplift of sawing frame 3° inclined saw band user manual in GERMAN or ENGLISH (the vertical hydraulic clam ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 46700 € : 891.97 € : Doppelsäulenführung : 8200x41x1,3 mm : 20-100 m/min : 810 mm : 750 mm : 910x750 mm : rund 600 mm, quadrat 600 : rund 360 mm, quadrat 360 : 725 mm : 4 kW : 0.12 kW : 4020 mm : 1600 mm : 2450 mm : 3970 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment hydraulic uplift of sawing frame user manual in GERMAN or ENGLISH OPTIONS: Hydraulic vertical clamping Micro cooli ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 73200 € : 1383.48 € : 2050 mm : 20 mm : 20 mm : 16 mm : 16 mm : 12 mm : 280 mm : 280 mm : 220 mm : 1,5 / 5 m/min : 16.5 kW : 4350 mm : 1700 mm : 1850 mm : 8550 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT (PRICES ON REQUEST): infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length harden ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 25200 € : 481.32 € : 1050 mm : 2.5 mm : 2.5 mm : 2 mm : 90 mm : 4,5 m/min : 2.2 kW : 2250 mm : 1000 mm : 1500 mm : 900 kg FOR ROUND AND ELEPTIC SHAPES FOR MASS PRODUCTION (CYCLE UP TO ONLY 20 SEC POSSIBLE) 4 rolls NC control with touchscreen Top roll driven by hydromotor and plantary gearbox Hydraulic drop end Mobile control panel Hardened rolls Operating manual in English or German OPTION: Feeding table price on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 080091 : prompt, Zwischenverkauf v : Türkei : 51120 € : 966.17 € : 1 : 60 to : 2550 mm : Y1 / Y2 und X Achse : 160 mm : 2150 mm : 250 mm : 350 mm : hydraulisch : 120 mm/s : 9 mm/s : 70 mm/s : 620 (mit optionaler R-Ach mm : 250 mm/s : 813 mm : 104 mm : 100 l : 5.5 kW : 3250 mm : 1200 mm : 2350 mm : 4250 kg 3 axes (Y1, Y2, and X axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles CNC controlled crowning table interm ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 59700 € : 1128.33 € : 100 to : 300 mm : 680x420 mm : 1100x600 mm : 500 mm : 17.5 mm/s : 5,5 mm/s : 37 mm/s : 7.5 kW : 1850 mm : 1400 mm : 2650 mm : 5400 kg 2-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 55600 € : 1050.84 € : 30 to : 200 mm : 500?800 mm : 600x1000 mm : 450 mm : 100 mm/s : 18 mm/s : 165 mm/s : 11 kW : 1950 mm : 1750 mm : 2650 mm : 4700 kg 4-pillar guide table and ram with T-slots manual stroke adjustment via cam switch manual and automatic operation front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 37600 € : 718.16 € : 40 to : 1550 mm : X und Y Achse : 160 mm : 1260 mm : 320 mm : 380 mm : hydraulisch : 90 mm/s : 10 mm/s : 600 mm : 845 mm : 100 mm : 120 l : 5,5 kW : 2000 mm : 1600 mm : 2235 mm : 3450 kg NC control for immersion depth (Y) and back gauge (X) synchronization control by means of a torsion shaft sheet support arms light barriers intermediate pieces for the upper tool clamping die seat and die die seat with 4 V openings split upper tool, slightly cranked, divided pedal user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT: laser safety device Fiessler NC controlled R axis manual crowning table motorized crowning table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 23700 € : 455.04 € : 40 to : 800 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 1750 mm : 950 mm : 1900 mm : 1640 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 83800 € : 1583.82 € : 2550 mm : 15 mm : 15 mm : 13 mm : 12 mm : 12 mm : 10 mm : 270 mm : 270 mm : 230 mm : 50 mm : 1155 mm : 15 kW : 4760 mm : 1660 mm : 1155 mm : 8950 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll le ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 68700 € : 1298.43 € : 3100 mm : 13 mm : 8 mm : 50 mm : 13 1/min : 1.75 ° : 16 : 37 to : 1000 mm : 200 mm/s : 30 kW : 330 l : 2 Stk. : 840 mm : 600 mm : 3550 mm : 4280 mm : 2300 mm : 3600 mm : 2350 mm : 12500 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttingleng ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 10200 € : 195.84 € : 150 to : fix : 300 mm : 1070 mm : 280x200 mm : 5 mm/s : 10 mm/s : 2050 mm : 1000 mm : 2270 mm : 1870 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 17100 € : 328.32 € : 200 mm : 4 - 6 mm : 2 - 3 mm : 30 1/min : 30 - 140 ° : 4 kW : 900 mm : 1150 mm : 1240 mm : 1150 kg Hydraulic drive Variable cutting angle 30 - 140° Max. thickness (420 N/mm²) : 6 mm (at 60°), 4 mm (at 140°) Max. thickness (600 N/mm²) : 3 mm (at 60°), 3 mm (at 140°) Automatic adjustment of blade gap 4 downholder 2 gauges angle adjustable Protection cover, acrylic glass Foot pedal Waste box According to ",CE", regulations User manual in English or German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 30900 € : 590.19 € : 200 to : horizontal verschiebbar : 300 mm : 1900 mm : 320x210 mm : 5 mm/s : 20 mm/s : 2460 mm : 1600 mm : 2700 mm : 4800 kg horizontal movable cylinder by handwheel steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH (sample photo shows mod. HDK 1570/150) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 76820 € : 1451.9 € : 160 to : 4050 mm : Y1 / Y2 und X Achse : 200 mm : 3600 mm : 300 mm : 430 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 620 mm : 250 mm/s : 858 mm : 104 mm : 15 kW : 4850 mm : 1900 mm : 2610 mm : 10500 kg 3 axes (Y1, Y2, and X axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles CNC crowning table intermediate clamps for upper tool upper tool1010/A/75°/0,8, se ...

: neu : 2024 : 9740 : prompt, Zwischenverkauf v : Türkei : 6200 € : 119.66 € : 1 : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2021 : 9502 : Türkei : 2100 € : 1 : 1050 mm : 2 mm : 75 mm : 1930 mm : 700 mm : 1160 mm : 300 kg MINT CONDITION 3 rolls asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 79900 € : 1510.11 € : 130 to : 1000 mm : 640 mm : 210 mm : 5 - 110 mm : 60 1/min : 630x400 mm : 90 mm : 330 mm : 11 kW : 2200 mm : 1372 mm : 3000 mm : 8200 kg 8-fold ram guide front protection by light guard manual ram adjustment mech. overload safety device automatic lubrication user manual in GERMAN and ENGLISH according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 2900 € : 1270 mm : 1.2 mm : 68 mm : 1.5 kW : 1610 mm : 700 mm : 1160 mm : 385 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 34900 € : 666.59 € : 2050 mm : 8 mm : 8 mm : 6 mm : 8 mm : 6 mm : 6 mm : 4 mm : 180 mm : 180 mm : 150 mm : 5 m/min : 3850 mm : 1350 mm : 1290 mm : 3300 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT: overhead crane side supports NC control variable speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090130 : prompt, Zwischenverkauf v : Türkei : 3400 € : 1 : 30 mm : 148 mm : 118 mm : 2 : 0,75 kW : 2 m/min : 50x10 mm / 800 mm, 20x6 m : 80x15 mm / 700 mm, 30 x 6 : 30x30 mm / 900 mm, 10x10 : Ø 30 mm / 900 mm, Ø 10 mm : Ø 60x1,5 mm / 1.000 mm, Ø : 50x30x3 mm / 1.200 mm, 40 : 40x40x3 mm / 1.200 mm, 30 : 40x40x5 mm / 600 mm, 30x3 : 35x35x5 mm / 600 mm, 30x3 : 600 mm : 800 mm : 1450 mm : 220 kg 2 mech. driven rolls strong cast steel construction shafts made of special steel,hardened and ground top roll manual adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN or ENGLISH WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 070155 : prompt, Zwischenverkauf v : Türkei : 6900 € : 133.17 € : 1 : 500 kg : 1200 mm : 400 mm : 550 mm : 300 mm : 80 mm : 1450 mm : 1200 mm : 1640 mm : 260 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control PNEUMATIC DOWN HOLDER SUPPORT ARM The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 20100 € : 385.92 € : Doppelsäulenführung : 4800x34x1,1 mm : 20-100 m/min : 380 mm : 380 mm : 520x380 mm : rund 300 mm, quadrat 300 : 590 mm : 0.55 kW : 3 kW : 0.12 kW : 2850 mm : 930 mm : 1660 mm : 1330 kg 2° inclined band blade brush control panel hydraulic vice hydromechanical blade tension inverter for continous adjustable cutting speed linear guides optical height adjustment pressure adjustment coolant pump saw band security switch heavy duty gearbox 1,2 meter roller table user manual in GERMAN or ENGLISH OPTION: turn table for mitre cuts hydraulic top clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 104600 € : 1976.94 € : Doppelsäulenführung : 10430x54x1,6 mm : 20-100 m/min : 750 mm : 1300x700 mm : rechteck 850 x 750 mm : rechteck 570 x 750 mm : rechteck 850 x 750 mm : 930 mm : 4 kW : 11 kW : 0.12 kW : 5500 mm : 2280 mm : 3400 mm : 8500 kg Hydraulic vice Digital display for angle indication Hydraulic saw arm clamping Manual saw arm rotation Continuously adjustable saw arm lowering speed Automatic saw frame lifting after cutting Sensitive cutting pressure regulation depending on material properties Hydromechanical blade tension readable via pressure gauge Mobile control panel Heavy-duty, helical-toothed conical gear Driven chip brush Blade guidance via carbide plates and rollers Automatic blade breakage protection Coolant system Hydraulic saw frame lifting Operating instructions in GERMAN or ENGLISH OPTIONS: Roller tables and band s ...

: gebraucht : 2023 : 9676 : prompt, Zwischenverkauf v : Deutschland : 13700 € : 1 : 1250 mm : 1.25 mm : 1,25 mm bei 1 Messerpaar, : 0.37 kW : 36 m/min : 70 mm : 1900 mm : 1600 mm : 1000 mm : 350 kg demo machine / mint condition - fixprice 3 pairs of blades Length measuring by wheel Digital preselection of one position Brake motor Rubber feeding rolls Manual crosscutting equipment in front and behind blade shaft with 1 cutting slide which alternaingly can be used on front and backside User manual in GERMAN OPTIONS: Additional pair of blades Decoiler The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090202 : Mai 2026, Zwischenverkauf : Türkei : 3100 € : 1.2 mm : 100 mm : 140 nm : 8 Stk. : 62 mm : 0.75 kW : 32 1/min : 900 mm : 450 mm : 1350 mm : 135 kg Haevy duty cast iron main frame Brake motor Foot pedal Adjustable lower roll 8 set of rolls Complete with stand User manual in ENGLISH or GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 29990 € : 572.81 € : 0.4 - 3.5 mm : 200 mm : 700 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 74800 € : 1413.72 € : 40 to : 2050 mm : Y1 / Y2 / X und R Achse : 200 mm : 1700 mm : 350 mm : 440 mm : servomotorischer Spindela : 180 mm/s : 10 mm/s : 115 mm/s : 650 mm : 250 mm : 1000 mm : 7.2 kW : 2600 mm : 1450 mm : 2650 mm : 4400 kg STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66S - 17 ", Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guid ...

: neu : 2025 : 080102 : prompt, Zwischenverkauf v : Türkei : 52200 € : 804.11 € : 1 : 42100 € : 60 to : 2100 mm : X und Y Achse : 160 mm : 1700 mm : 320 mm : 380 mm : hydraulisch : 90 mm/s : 10 mm/s : 600 mm : 845 mm : 100 mm : 120 l : 7,5 kW : 2450 mm : 1600 mm : 2235 mm : 4340 kg NC control for immersion depth (Y) and back gauge (X) synchronization control by means of a torsion shaft sheet support arms laser safety device Fiessler motorized crowning table intermediate pieces for the upper tool clamping die holder for 60 mm tools die with 4 V openings upper tool, slightly cranked, sectioned foot pedal user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 62400 € : 1179.36 € : 4100 mm : 6 mm : 4 mm : 50 mm : 12 1/min : 1.5 ° : 20 : 17 to : 1000 mm : 200 mm/s : 15 kW : 200 l : 3 Stk. : 865 mm : 580 mm : 4510 mm : 5230 mm : 2300 mm : 3600 mm : 2150 mm : 11460 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 6600 € : 127.38 € : 4 mm : 200 mm : 300 nm : 4 Stk. : 126 mm : 10 1/min : 1475 mm : 550 mm : 1200 mm : 460 kg reduction motor with brake system movement of rolls with foot pedal adjustable idle roll steel shafts with bronze bushings 4 set of rolls complete with stand user manual in GERMAN or ENGLISH according to CE rules ALTERNATIVE: Version HIBKS 4,0 with hydraulic top roll adjustment € 9.100,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 209800 € : 3371.76 € : 20 to : 2000x1250 mm : 2000 mm : 1250 mm : 90 m/Min : 70 m/Min : 114 m/Min : 1100 1/Min : 375 1/Min : 1200 1/Min : 6 mm : 3 mm : 3 mm : 1.5 mm : 27 : 0,1 mm : 0,05 mm : 30 U/Min : 150 U/Min : 100 kg : 940 mm : 6 bar : 88.9 mm : 7.5 kW : 5600 mm : 6600 mm : 4200 mm : 6200 mm : 2310 mm : 11000 kg Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Stations C+B Station Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 10 x B-Station fix: 12,8 - 31,7 mm 2 x B-Station Index ...

: neu : 2026 : 090180 : prompt, Zwischenverkauf v : Türkei : 8300 € : 160.19 € : 1 : 50 mm : 152 mm : 162 mm : 3 : 1.1 kW : 4,5 m/min : 60x10 mm / 600 mm, 20x10 : 100x15 mm / 600 mm, 50 x : 35x35 mm / 600 mm, 15x15 : 35 mm / 600 mm, Dm. 20 mm : 70x2 mm / 1200 mm, Dm. 25 : 70x30x3 mm / 1500 mm, 30x : 50x50x3 mm / 1600 mm, 20x : 50x50x6 mm / 600 mm, 30x3 : 50x50x6 mm / 900 mm, 30x3 : 810 mm : 950 mm : 1500 mm : 500 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 252800 € : 600 to : 4050 mm : Y1 / Y2 / X und R Achse : 365 mm : 3100 mm : 410 mm : 700 mm : hydraulisch : 160 mm/s : 10 mm/s : 160 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 154 mm : 280 l : 5750 mm : 2500 mm : 4000 mm : 40500 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transp ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 137900 € : 2606.31 € : 220 to : 6050 mm : Y1 / Y2 / X Achse : 265 mm : 5100 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 1050 mm : 154 mm : 250 l : 22 kW : 7500 mm : 1770 mm : 3350 mm : 20800 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 43550 € : 831.81 € : 1550 mm : 12 mm : 12 mm : 10 mm : 10 mm : 8 mm : 220 mm : 200 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 3900 mm : 1150 mm : 1250 mm : 3600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 %  ...

: neu : 2025 : 060103 : prompt, Zwischenverkauf v : Türkei : 7500 € : 121.59 € : 1 : 6300 € : 350 mm : 350x32x63 mm : 45 / 80 U/Min : 45 ° : 45 ° : rund 115 mm / quadratisch : rund 110 mm / quadratisch : rund 110 mm / quadratisch : 1,8 / 2,2 kW : 1100 mm : 1000 mm : 1400 mm : 300 kg Semi-automatic circular saw designed High production rates, ideal for small and mid production Heavy duty gearbox Cast iron structure Foot switch actuation Hydro-pneumatic operation of saw head smoothes descent for optimum cut Pneumatic vice 2 cutting speeds Adjustable head stroke according to the dimensions of the material which has to be cut Piece counter 45° right to 45° left cutting saw blade not included OPTION: saw blade Dm. 350 mm € 180,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 230188 € : 3 kW : Wechseltisch : 16 mm : 8 mm : 8 mm : 5 mm : 8 mm : 27,9 (mit Absaugung) kW : 4100 x 2070 mm : 4100 mm : 2070 mm : 125 mm : 4064 x 2032 mm : 240 (für 3 - 12 kW) / 400 kg/m² : 3900 (für 3 - 12 kW) / 64 kg : 100 m/min : 100 m/min : 141 m/min : 14 m/s² : +/- 0,05 mm : +/- 0,05 mm : 32 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 57000 € : 1077.3 € : 2550 mm : 13 mm : 13 mm : 10 mm : 10 mm : 8 mm : 260 mm : 260 mm : 200 mm : 1,5 / 6 m/min : 7.5 kW : 4800 mm : 1600 mm : 1550 mm : 6800 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 %  ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 33700 € : 643.67 € : 30 to : 2 mm : 400 mm : 600 mm : 150 mm : 1 - 60 mm : 140 1/min : 4 : 60 mm : 40 mm : 200 mm : 300 mm : 3 kW : 1300 mm : 1150 mm : 2050 mm : 1670 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operation Touchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs 2 free cams for connecting peripherals A ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 10000 € : 193 € : 1050 mm : 4 mm : 110 mm : 2.2 kW : 1100 mm : 750 mm : 1000 mm : 990 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 40900 € : 781.19 € : 2050 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 200 - 220 mm : 200 - 220 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 3950 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5100 € : 98.43 € : 2.5 mm : 160 mm : 250 nm : 4 Stk. : 96 mm : 13 1/min : 1475 mm : 550 mm : 1200 mm : 320 kg reduction motor with brake system movement of rolls with foot pedal adjustable idle roll steel shafts with bronze bushings 4 set of rolls complete with stand user manual in GERMAN or ENGLISH according to CE rules ALTERNATIVE: HIBKS 2,5 with hydraulic upper roll feed € 7.600,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.